Resources

In a bacterial chemostat with an initial census of N0=2.00×107N_0 = 2.00 \times 10^7 cells, a continuous sublethal dose of ampicillin (2.00 μg/mL2.00\ \mu\text{g/mL}) is administered. An individual non-resistant bacterium placed in this medium does not adaptively alter its peptidoglycan transpeptidase gene sequence to survive; it lyses. However, spontaneous mutations conferring beta-lactamase production (ampRamp^R) occur at a rate of μ=1.50×10−7\mu = 1.50 \times 10^{-7} mutations per cell division. Coupling the principles of exponential population growth (Nt=N0ektN_t = N_0 e^{kt} with net specific growth rate k=0.400 h−1k = 0.400\ \text{h}^{-1} for resistant cells) and gene frequency dynamics: (a) Calculate the expected number of spontaneous ampRamp^R mutants generated during the initial generation of 2.00×1072.00 \times 10^7 divisions. (b) Calculate the time tt in hours required for an initial subpopulation of 1010 resistant cells to expand to 1.00×1051.00 \times 10^5 cells in the presence of ampicillin.

Answer and steps

Final answer

(a) Expected spontaneous mutants =μ×N0=(1.50×10−7)(2.00×107)=3= \mu \times N_0 = (1.50 \times 10^{-7})(2.00 \times 10^7) = 3 mutant cells; (b) Solving 1.00×105=10e0.400t1.00 \times 10^5 = 10 e^{0.400 t} gives t=ln⁡(10000)0.400=9.21030.400≈23.0 hourst = \frac{\ln(10000)}{0.400} = \frac{9.2103}{0.400} \approx 23.0\ \text{hours}. Evolution occurs as the frequency of the resistant lineage rises within the chemostat population, not through individual physiological transformation.

Steps

01

Expected Number of Spontaneous Mutants (Part a)

Conceptual Foundation: Evolution Acts on Populations, Not Individuals

A common misconception is that an individual organism "adapts" by changing its own genetic makeup when faced with an environmental challenge. In reality:

  • Individual level: A non-resistant bacterium exposed to ampicillin cannot sense the antibiotic and rewrite its DNA to produce β\beta-lactamase; it simply fails to cross-link its cell wall and lyses.
  • Population level: Spontaneous, random mutations occur independently of the antibiotic's presence. When ampicillin is introduced, it acts as a selective agent, removing susceptible cells while allowing pre-existing or newly mutated resistant variants to survive and reproduce. Over time, the allele frequency of the resistance gene (ampRamp^R) increases across the population.

The expected number of mutant cells arising during a single round of cell divisions is the product of the mutation rate per division (μ\mu) and the total number of division events (N0N_0):

Expected mutants=μ⋅N0\text{Expected mutants} = \mu \cdot N_0

Substitute the given values: μ=1.50×10−7 mutations/division\mu = 1.50 \times 10^{-7}\text{ mutations/division} N0=2.00×107 divisionsN_0 = 2.00 \times 10^7\text{ divisions}

Expected mutants=(1.50×10−7)⋅(2.00×107)=3\text{Expected mutants} = (1.50 \times 10^{-7}) \cdot (2.00 \times 10^7) = 3

Thus, approximately 33 mutant cells carrying the ampRamp^R phenotype are generated spontaneously.


02

Time Required for Resistant Population Expansion (Part b)

The exponential growth of the surviving resistant subpopulation is described by:

Nt=N0ektN_t = N_0 e^{kt}

Where:

  • N0=10 cellsN_0 = 10\text{ cells} (initial resistant subpopulation)
  • Nt=1.00×105 cellsN_t = 1.00 \times 10^5\text{ cells} (target resistant subpopulation)
  • k=0.400 h−1k = 0.400\ \text{h}^{-1} (net specific growth rate)
  • tt is the elapsed time in hours

Rearrange the equation to isolate tt:

NtN0=ekt\frac{N_t}{N_0} = e^{kt}

1.00×10510=104=e0.400t\frac{1.00 \times 10^5}{10} = 10^4 = e^{0.400 t}

Take the natural logarithm (ln⁡\ln) of both sides:

ln⁡(104)=0.400t\ln(10^4) = 0.400 t

t=ln⁡(10000)0.400≈9.21030.400≈23.0 hourst = \frac{\ln(10000)}{0.400} \approx \frac{9.2103}{0.400} \approx 23.0\ \text{hours}

It takes approximately 23.0 hours23.0\ \text{hours} for the resistant subpopulation to reach 1.00×1051.00 \times 10^5 cells. During this interval, the chemostat shifts from predominantly sensitive cells to predominantly resistant cells, demonstrating natural selection at the population scale.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student uses common logarithm (log₁₀) instead of natural logarithm (ln) when solving the continuous exponential growth equation e^(kt).

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Mutants=(2.00×107)×(1.50×10−7)=3\text{Mutants} = (2.00 \times 10^7) \times (1.50 \times 10^{-7}) = 3

  2. Step 2

    1.00×105=10e(0.400t)  ⟹  e(0.400t)=10,0001.00 \times 10^5 = 10 e^{(0.400 t)} \implies e^{(0.400 t)} = 10{,}000

  3. Step 3

    0.400t=log⁡10(10,000)  ⟹  0.400t=40.400 t = \log_{10}(10{,}000) \implies 0.400 t = 4

    Correct

    0.400t=ln⁡(10,000)≈9.21030.400 t = \ln(10{,}000) \approx 9.2103

    Because the base of the exponential term is ee, you must take the natural logarithm (ln⁡\ln) of both sides rather than the common logarithm (log⁡10\log_{10}). Inverting eue^u with log⁡10\log_{10} yields log⁡10(eu)=ulog⁡10(e)≈0.4343u\log_{10}(e^u) = u \log_{10}(e) \approx 0.4343u, not uu.

  4. Step 4

    t=10 hourst = 10\text{ hours}

    Correct

    t=ln⁡(10,000)0.400≈23.0 hourst = \frac{\ln(10{,}000)}{0.400} \approx 23.0\text{ hours}

    Your final division followed logically from your previous step, but the numerical result is incorrect due to using log⁡10\log_{10} instead of ln⁡\ln.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the expected count of spontaneous mutants.

You correctly set up the continuous population growth equation and isolated ekte^{kt}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Logarithm Base Mismatch

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You took the base-10 logarithm log⁡10\log_{10} to invert an exponential with base ee, confusing the inverse operation for 10x10^x with the inverse operation for exe^x.

REASONING PATH
Your ACEpath teacher’s suggested approach
Match Logarithm Base to Exponential Base
  • To solve ex=Ce^x = C, use the natural logarithm ln⁡(C)\ln(C) because ln⁡(ex)=x\ln(e^x) = x. To solve 10x=C10^x = C, use log⁡10(C)\log_{10}(C).

  • Check the base of the exponential term before taking a logarithm: if the base is ee, immediately write ln⁡\ln.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Take the natural logarithm of both sides: ln⁡(e0.400t)=ln⁡(10,000)\ln(e^{0.400 t}) = \ln(10{,}000)

  2. Simplify the left side using ln⁡(ex)=x\ln(e^x) = x: 0.400t=ln⁡(10,000)0.400 t = \ln(10{,}000)

  3. Evaluate ln⁡(10,000)≈9.2103\ln(10{,}000) \approx 9.2103

  4. Solve for tt: t=9.21030.400≈23.026 hourst = \frac{9.2103}{0.400} \approx 23.026\text{ hours}

Final answer

t≈23.0 hourst \approx 23.0\text{ hours}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the identity ln⁡(eu)=u\ln(e^u) = u and distinguish it from log⁡10(10u)=u\log_{10}(10^u) = u.

  • Practice solving continuous exponential growth and decay models (Nt=N0ektN_t = N_0 e^{kt}) using ln⁡\ln.

OverviewACEpath Teacher's Diagnosis

02 The student misinterprets the mutation rate per cell division as a percentage and divides by 100.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    μ=1.50×10−7100=1.50×10−9  ⟹  Mutants=(2.00×107)×(1.50×10−9)=0.03 mutants\mu = \frac{1.50 \times 10^{-7}}{100} = 1.50 \times 10^{-9} \implies \text{Mutants} = (2.00 \times 10^7) \times (1.50 \times 10^{-9}) = 0.03\text{ mutants}

    Correct

    Expected mutants=μ×N0=(1.50×10−7)×(2.00×107)=3 mutants\text{Expected mutants} = \mu \times N_0 = (1.50 \times 10^{-7}) \times (2.00 \times 10^7) = 3\text{ mutants}

    The mutation rate μ=1.50×10−7\mu = 1.50 \times 10^{-7} is already expressed as an absolute probability per cell division, not as a percentage (1.50×10−7%1.50 \times 10^{-7}\%). Dividing by 100100 underestimates the expected mutant count by two orders of magnitude.

  2. Step 2

    1.00×105=10e0.400t  ⟹  e0.400t=10,000  ⟹  0.400t=ln⁡(10,000)  ⟹  0.400t=9.21  ⟹  t=23.0 hours1.00 \times 10^5 = 10 e^{0.400 t} \implies e^{0.400 t} = 10{,}000 \implies 0.400 t = \ln(10{,}000) \implies 0.400 t = 9.21 \implies t = 23.0\text{ hours}

WHAT YOU DID WELL
Compliments from Your Teacher

You recognized that total mutant count equals the product of mutation rate and total cell divisions.

You correctly modeled the resistant subpopulation with the exponential growth formula Nt=N0ektN_t = N_0 e^{kt}.

You accurately solved for time tt using the natural logarithm.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Unnecessary percentage conversion of a rate

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You interpreted the scientific notation of the mutation rate as a percentage value needing conversion (%→decimal\% \to \text{decimal}) rather than recognizing that biological mutation rates given per division are already unitless decimal probabilities.

REASONING PATH
Your ACEpath teacher’s suggested approach
Interpreting Rate Units
  • Mutation rate μ\mu is stated per event (e.g., mutations per cell division or mutations per base pair per generation). Unless an explicit percent symbol ($%) is written, the number is already an absolute fraction/probability.

  • Use the stated value of μ\mu directly without dividing by 100100 unless a percent sign %\% is explicitly attached to the number.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify that μ=1.50×10−7 mutations/division\mu = 1.50 \times 10^{-7}\text{ mutations/division} is already the absolute probability per division.

  2. Multiply directly by the division count: Mutants=(1.50×10−7)×(2.00×107)=3 mutants\text{Mutants} = (1.50 \times 10^{-7}) \times (2.00 \times 10^7) = 3\text{ mutants}.

Final answer

(a) 33 mutant cells; (b) 23.0 hours23.0\text{ hours}

NEXT STEPS
Final Takeaways from Your Teacher
  • Check given rates for explicit percentage signs (%)beforedecidingtodivideby\%) before deciding to divide by 100$.

  • Perform a sanity check on unit probabilities: values on the order of 10−610^{-6} to 10−810^{-8} are typical baseline biological mutation rates per division.

OverviewACEpath Teacher's Diagnosis

03 The student confuses the net specific growth rate k in an exponential model with doubling time or uses linear growth instead of exponential growth.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Expected mutants=(2.00×107)×(1.50×10−7)=3\text{Expected mutants} = (2.00 \times 10^7) \times (1.50 \times 10^{-7}) = 3

  2. Step 2

    Nt=N0+kt  ⟹  1.00×105=10+0.400tN_t = N_0 + kt \implies 1.00 \times 10^5 = 10 + 0.400 t

    Correct

    Nt=N0ekt  ⟹  1.00×105=10e0.400tN_t = N_0 e^{kt} \implies 1.00 \times 10^5 = 10 e^{0.400 t}

    You set up a linear addition model (Nt=N0+ktN_t = N_0 + kt). Because bacteria multiply by binary fission, population expansion follows exponential growth (Nt=N0ektN_t = N_0 e^{kt}).

  3. Step 3

    t=249,975 hourst = 249,975\text{ hours}

    Correct

    t=ln⁡(104)0.400≈23.0 hourst = \frac{\ln(10^4)}{0.400} \approx 23.0\text{ hours}

    Your arithmetic follows correctly from your linear equation, but the numerical result is incorrect due to the initial model error.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the expected number of spontaneous mutants as 33.

You accurately solved your linear algebraic equation for tt.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Linear vs. Exponential Growth Model Confusion

Using addition (N0+ktN_0 + kt) rather than exponential multiplication (N0ektN_0 e^{kt}) for bacterial reproduction over time.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated population growth as a constant linear addition of individuals rather than exponential expansion where existing cells continuously divide. In biological populations, the growth rate is proportional to the current population size (dNdt=kN\frac{dN}{dt} = kN), which integrates to Nt=N0ektN_t = N_0 e^{kt}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Recognize Exponential Growth in Populations
  • Bacterial populations expanding without resource limits follow Nt=N0ektN_t = N_0 e^{kt}, never linear growth Nt=N0+ktN_t = N_0 + kt.

  • Always look for the exponential formula when a specific growth rate kk with units of time−1\text{time}^{-1} is given.

Solve for Time in an Exponential Model
  • To isolate tt in Nt=N0ektN_t = N_0 e^{kt}, divide by N0N_0 and take the natural logarithm: t=ln⁡(Nt/N0)kt = \frac{\ln(N_t / N_0)}{k}.

  • Check your units and scale: exponential bacterial expansion from 1010 to 10510^5 cells at k=0.400 h−1k = 0.400\text{ h}^{-1} takes hours, not hundreds of thousands of hours.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set up the exponential population growth equation: Nt=N0ektN_t = N_0 e^{kt}.

  2. Substitute the given values: 1.00×105=10e0.400t1.00 \times 10^5 = 10 e^{0.400 t}.

  3. Isolate the exponential term: 1.00×10510=104=e0.400t\frac{1.00 \times 10^5}{10} = 10^4 = e^{0.400 t}.

  4. Take the natural logarithm of both sides: ln⁡(104)=0.400t\ln(10^4) = 0.400 t.

  5. Solve for tt: t=ln⁡(10000)0.400≈9.21030.400≈23.0 hourst = \frac{\ln(10000)}{0.400} \approx \frac{9.2103}{0.400} \approx 23.0\text{ hours}.

Final answer

(a) 33 mutant cells; (b) t≈23.0 hourst \approx 23.0\text{ hours}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review how binary fission leads to exponential growth (Nt=N0ektN_t = N_0 e^{kt}) rather than linear addition.

  • Practice solving for time tt using natural logarithms when given specific growth rate kk.

  • Perform a quick order-of-magnitude reality check on calculated times for microbial growth.

Lock it in

Similar question

01

A population of antibiotic-resistant bacteria expands according to Nt=N0e0.500tN_t = N_0 e^{0.500 t}. If the resistant subpopulation begins at N0=20N_0 = 20 cells, calculate the time tt in hours required to reach 2.00×1042.00 \times 10^4 cells.

Answer

Set up the equation: 20e0.500t=2.00×104  ⟹  e0.500t=100020 e^{0.500 t} = 2.00 \times 10^4 \implies e^{0.500 t} = 1000. Take the natural logarithm: 0.500t=ln⁡(1000)≈6.90780.500 t = \ln(1000) \approx 6.9078. Divide by 0.5000.500: t=6.90780.500≈13.8 hourst = \frac{6.9078}{0.500} \approx 13.8\text{ hours}.

02

In a culture of 1.00×1081.00 \times 10^8 bacteria, a point mutation conferring rifampicin resistance arises at rate μ=2.50×10−8\mu = 2.50 \times 10^{-8} per division. The resulting mutants grow continuously at k=0.350 h−1k = 0.350\text{ h}^{-1}. (a) How many mutants arise in the first division cycle? (b) How many hours will it take for these initial mutants to reach 5.00×1035.00 \times 10^3 cells?

Answer

(a) Expected mutants =(1.00×108)(2.50×10−8)=2.5≈2 or 3 mutants= (1.00 \times 10^8)(2.50 \times 10^{-8}) = 2.5 \approx 2\text{ or }3\text{ mutants} (using the exact expected value 2.52.5). (b) 2.5e0.350t=5000  ⟹  e0.350t=20002.5 e^{0.350 t} = 5000 \implies e^{0.350 t} = 2000. Take the natural logarithm: 0.350t=ln⁡(2000)≈7.6009  ⟹  t=7.60090.350≈21.7 hours0.350 t = \ln(2000) \approx 7.6009 \implies t = \frac{7.6009}{0.350} \approx 21.7\text{ hours}.

03

A chemostat contains non-resistant cells that lyse at rate d=0.200 h−1d = 0.200\text{ h}^{-1} (Nsens(t)=N0e−0.200tN_{\text{sens}}(t) = N_0 e^{-0.200 t}) and resistant cells that expand at net rate k=0.300 h−1k = 0.300\text{ h}^{-1} (Nres(t)=R0e0.300tN_{\text{res}}(t) = R_0 e^{0.300 t}). If initially N0=1.00×106N_0 = 1.00 \times 10^6 and R0=10R_0 = 10, find the time tt at which the resistant cells outnumber the sensitive cells.

Answer

Set Nres(t)=Nsens(t)N_{\text{res}}(t) = N_{\text{sens}}(t): 10e0.300t=1.00×106e−0.200t10 e^{0.300 t} = 1.00 \times 10^6 e^{-0.200 t}. Multiply by e0.200te^{0.200 t} and divide by 1010: e0.500t=1.00×105e^{0.500 t} = 1.00 \times 10^5. Invert with natural logarithm: 0.500t=ln⁡(105)=5ln⁡(10)≈11.51290.500 t = \ln(10^5) = 5 \ln(10) \approx 11.5129. Solve for tt: t=11.51290.500≈23.0 hourst = \frac{11.5129}{0.500} \approx 23.0\text{ hours}.

Loading workspace…