Resources

According to the Cholodny-Went model and the acid-growth hypothesis, unilateral blue-light illumination activates phototropin kinases (phot1/phot2), initiating lateral transport of auxin across a coleoptile of diameter w=1.50 mmw = 1.50\text{ mm}. As the exposure time t→∞t \to \infty, the fraction of total free auxin accumulated in the shaded flank fshaded(t)f_{\text{shaded}}(t) asymptotically approaches an upper limit fmax⁡=0.720f_{\max} = 0.720 according to the first-order saturation function fshaded(t)=f0+(fmax⁡−f0)(1−e−kpt)f_{\text{shaded}}(t) = f_0 + (f_{\max} - f_0)(1 - e^{-k_p t}), where the initial symmetric distribution is f0=0.500f_0 = 0.500 and kp=1.20 h−1k_p = 1.20\text{ h}^{-1}. The shaded-side cell wall acidification causes an activation of expansin proteins such that the local steady-state cell elongation rate is given by v(t)=vbase(1+2.50⋅[fshaded(t)−0.500])v(t) = v_{\text{base}} \left(1 + 2.50 \cdot [f_{\text{shaded}}(t) - 0.500]\right), where vbase=0.400 mm/hv_{\text{base}} = 0.400\text{ mm/h}. Calculate: (a) the asymptotic maximum cell elongation rate v∞v_{\infty} on the shaded side as t→∞t \to \infty, and (b) the instantaneous elongation rate v(t)v(t) at t=2.00 hourst = 2.00\text{ hours}.

Answer and steps

Final answer

(a) v∞=0.620 mm/hv_{\infty} = 0.620\text{ mm/h}; (b) v(2.00 h)=0.600 mm/hv(2.00\text{ h}) = 0.600\text{ mm/h}

Steps

Part (a): Determining the Asymptotic Maximum Elongation Rate (v∞v_{\infty})

  1. Find the asymptotic auxin fraction on the shaded side: As exposure time t→∞t \to \infty, the exponential term e−kpt→0e^{-k_p t} \to 0. The fraction of free auxin on the shaded flank reaches its saturation limit: fshaded(∞)=fmax⁡=0.720f_{\text{shaded}}(\infty) = f_{\max} = 0.720
  2. Calculate the corresponding elongation rate: Substitute fshaded(∞)=0.720f_{\text{shaded}}(\infty) = 0.720 into the elongation rate formula: v∞=vbase(1+2.50⋅[fmax⁡−0.500])v_{\infty} = v_{\text{base}} \left(1 + 2.50 \cdot [f_{\max} - 0.500]\right) v∞=0.400⋅(1+2.50⋅[0.720−0.500])v_{\infty} = 0.400 \cdot \left(1 + 2.50 \cdot [0.720 - 0.500]\right) v∞=0.400⋅(1+2.50⋅0.220)v_{\infty} = 0.400 \cdot \left(1 + 2.50 \cdot 0.220\right) v∞=0.400⋅(1+0.550)=0.400⋅1.550=0.620 mm/hv_{\infty} = 0.400 \cdot (1 + 0.550) = 0.400 \cdot 1.550 = 0.620\text{ mm/h}

Part (b): Determining the Instantaneous Elongation Rate at t=2.00 hourst = 2.00\text{ hours}

  1. Calculate the auxin fraction at t=2.00 ht = 2.00\text{ h}: The decay exponent is: kpt=(1.20 h−1)(2.00 h)=2.40k_p t = (1.20\text{ h}^{-1})(2.00\text{ h}) = 2.40 Evaluating the exponential function: e−2.40≈0.0907e^{-2.40} \approx 0.0907 1−e−2.40≈1−0.0907=0.90931 - e^{-2.40} \approx 1 - 0.0907 = 0.9093

    Substitute this back into the first-order saturation equation: fshaded(2.00)=f0+(fmax⁡−f0)(1−e−2.40)f_{\text{shaded}}(2.00) = f_0 + (f_{\max} - f_0)(1 - e^{-2.40}) fshaded(2.00)=0.500+(0.720−0.500)(0.9093)f_{\text{shaded}}(2.00) = 0.500 + (0.720 - 0.500)(0.9093) fshaded(2.00)=0.500+0.220⋅0.9093=0.500+0.200=0.700f_{\text{shaded}}(2.00) = 0.500 + 0.220 \cdot 0.9093 = 0.500 + 0.200 = 0.700

  2. Calculate the instantaneous rate v(2.00 h)v(2.00\text{ h}): Substitute fshaded(2.00)=0.700f_{\text{shaded}}(2.00) = 0.700 into the cell elongation rate expression: v(2.00)=vbase(1+2.50⋅[0.700−0.500])v(2.00) = v_{\text{base}} \left(1 + 2.50 \cdot [0.700 - 0.500]\right) v(2.00)=0.400⋅(1+2.50⋅0.200)v(2.00) = 0.400 \cdot (1 + 2.50 \cdot 0.200) v(2.00)=0.400⋅(1+0.500)=0.400⋅1.500=0.600 mm/hv(2.00) = 0.400 \cdot (1 + 0.500) = 0.400 \cdot 1.500 = 0.600\text{ mm/h}

(Common Pitfall: Ensure that the baseline subtraction of 0.5000.500 representing the initial symmetric state is performed before multiplying by the expansin sensitivity coefficient 2.502.50.)

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets to subtract the baseline fraction 0.500 inside the rate equation, multiplying 2.50 directly by the total fraction f_shaded.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    fshaded=0.720f_{\text{shaded}} = 0.720

  2. Step 2

    v∞=0.400⋅(1+2.50⋅0.720)  ⟹  v∞=0.400⋅(1+1.800)=1.120 mm/hv_{\infty} = 0.400 \cdot (1 + 2.50 \cdot 0.720) \implies v_{\infty} = 0.400 \cdot (1 + 1.800) = 1.120\text{ mm/h}

    Correct

    v∞=0.400⋅(1+2.50⋅[0.720−0.500])=0.620 mm/hv_{\infty} = 0.400 \cdot \left(1 + 2.50 \cdot [0.720 - 0.500]\right) = 0.620\text{ mm/h}

    You omitted the baseline subtraction term −0.500-0.500 inside the parentheses, multiplying the sensitivity factor 2.502.50 by the total auxin fraction rather than the excess fraction above baseline.

  3. Step 3

    fshaded(2.00)=0.500+0.220⋅(1−e−2.40)=0.700f_{\text{shaded}}(2.00) = 0.500 + 0.220 \cdot (1 - e^{-2.40}) = 0.700

  4. Step 4

    v(2.00)=0.400⋅(1+2.50⋅0.700)  ⟹  v(2.00)=0.400⋅(1+1.750)=1.100 mm/hv(2.00) = 0.400 \cdot (1 + 2.50 \cdot 0.700) \implies v(2.00) = 0.400 \cdot (1 + 1.750) = 1.100\text{ mm/h}

    Correct

    v(2.00)=0.400⋅(1+2.50⋅[0.700−0.500])=0.600 mm/hv(2.00) = 0.400 \cdot \left(1 + 2.50 \cdot [0.700 - 0.500]\right) = 0.600\text{ mm/h}

    You repeated the same omission of the −0.500-0.500 baseline offset, multiplying 2.502.50 directly by 0.7000.700 instead of the net deviation (0.700−0.500)(0.700 - 0.500).

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly determined the asymptotic saturation fraction fmax⁡=0.720f_{\max} = 0.720.

You evaluated the exponential saturation expression at t=2.00 ht = 2.00\text{ h} with high arithmetic accuracy to get fshaded(2.00)=0.700f_{\text{shaded}}(2.00) = 0.700.

You correctly applied the order of operations in expanding and multiplying your algebraic expressions.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omission of Baseline Offset in Rate Equation

You substituted fshadedf_{\text{shaded}} in place of [fshaded−0.500][f_{\text{shaded}} - 0.500] in the elongation velocity formula.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You overlooked that auxin-stimulated growth enhancement depends on the lateral auxin asymmetry relative to the unilluminated symmetric baseline fraction of f0=0.500f_0 = 0.500, rather than the absolute fraction of auxin.

REASONING PATH
Your ACEpath teacher’s suggested approach
Baseline Reference Value
  • When a rate equation models stimulation above an unstimulated symmetric state, ensure the stimulus variable is expressed as a difference: Δf=f−fbase\Delta f = f - f_{\text{base}}.

  • Check whether the resting state already has f=0.500f = 0.500 at which v=vbasev = v_{\text{base}}, meaning only the difference [fshaded−0.500][f_{\text{shaded}} - 0.500] enhances growth.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Subtract the baseline fraction before applying the sensitivity coefficient: Δf=0.720−0.500=0.220\Delta f = 0.720 - 0.500 = 0.220.

  2. Compute the enhanced factor: 1+2.50⋅0.220=1+0.550=1.5501 + 2.50 \cdot 0.220 = 1 + 0.550 = 1.550.

  3. Multiply by the base velocity: v∞=0.400⋅1.550=0.620 mm/hv_{\infty} = 0.400 \cdot 1.550 = 0.620\text{ mm/h}.

  4. Repeat for t=2.00 ht = 2.00\text{ h}: Δf=0.700−0.500=0.200\Delta f = 0.700 - 0.500 = 0.200.

  5. Compute v(2.00 h)=0.400⋅(1+2.50⋅0.200)=0.400⋅1.500=0.600 mm/hv(2.00\text{ h}) = 0.400 \cdot (1 + 2.50 \cdot 0.200) = 0.400 \cdot 1.500 = 0.600\text{ mm/h}.

Final answer

(a) v∞=0.620 mm/hv_{\infty} = 0.620\text{ mm/h}; (b) v(2.00 h)=0.600 mm/hv(2.00\text{ h}) = 0.600\text{ mm/h}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always perform a sanity check at t=0t = 0: verify that plugging in fshaded(0)=0.500f_{\text{shaded}}(0) = 0.500 returns v(0)=vbase=0.400 mm/hv(0) = v_{\text{base}} = 0.400\text{ mm/h}.

  • Circle or highlight offset brackets like [f(t)−f0][f(t) - f_0] when transcribing formulas onto scratch paper.

OverviewACEpath Teacher's Diagnosis

02 The student calculates the fraction using e^(-k_p * t) instead of 1 - e^(-k_p * t), confusing the remaining fraction with the accumulated fraction.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    fshaded=0.720  ⟹  v∞=0.400⋅(1+2.50⋅(0.720−0.500))  ⟹  v∞=0.400⋅1.550=0.620 mm/hf_{\text{shaded}} = 0.720 \implies v_{\infty} = 0.400 \cdot (1 + 2.50 \cdot (0.720 - 0.500)) \implies v_{\infty} = 0.400 \cdot 1.550 = 0.620\text{ mm/h}

  2. Step 2

    fshaded(2.00)=0.500+0.220⋅e−2.40  ⟹  fshaded(2.00)=0.500+0.220⋅0.0907=0.520f_{\text{shaded}}(2.00) = 0.500 + 0.220 \cdot e^{-2.40} \implies f_{\text{shaded}}(2.00) = 0.500 + 0.220 \cdot 0.0907 = 0.520

    Correct

    fshaded(2.00)=0.500+(0.720−0.500)(1−e−2.40)=0.500+0.220(0.9093)=0.700f_{\text{shaded}}(2.00) = 0.500 + (0.720 - 0.500)(1 - e^{-2.40}) = 0.500 + 0.220(0.9093) = 0.700

    You multiplied the maximum shift (fmax⁡−f0)(f_{\max} - f_0) by e−kpte^{-k_p t} instead of (1−e−kpt)(1 - e^{-k_p t}). As time increases, auxin accumulates toward saturation, so the accumulated fraction must increase from 0.5000.500 toward 0.7200.720, requiring the factor (1−e−kpt)(1 - e^{-k_p t}).

  3. Step 3

    v(2.00)=0.400⋅(1+2.50⋅(0.520−0.500))  ⟹  v(2.00)=0.400⋅(1+0.050)=0.420 mm/hv(2.00) = 0.400 \cdot (1 + 2.50 \cdot (0.520 - 0.500)) \implies v(2.00) = 0.400 \cdot (1 + 0.050) = 0.420\text{ mm/h}

    Correct

    v(2.00)=0.400⋅(1+2.50⋅[0.700−0.500])=0.600 mm/hv(2.00) = 0.400 \cdot (1 + 2.50 \cdot [0.700 - 0.500]) = 0.600\text{ mm/h}

    Your formula structure and arithmetic were correct, but the result was affected by the incorrect value of fshaded(2.00)f_{\text{shaded}}(2.00) from the previous step.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified and applied the asymptotic saturation limit fmax⁡=0.720f_{\max} = 0.720 to solve part (a).

You correctly substituted your calculated auxin fractions into the elongation rate formula v(t)=vbase(1+2.50⋅[fshaded(t)−0.500])v(t) = v_{\text{base}}(1 + 2.50 \cdot [f_{\text{shaded}}(t) - 0.500]).

You accurately computed the exponent kpt=1.20⋅2.00=2.40k_p t = 1.20 \cdot 2.00 = 2.40 and its exponential value e−2.40≈0.0907e^{-2.40} \approx 0.0907.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Saturation Function Complement Error

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused the remaining fractional distance to saturation, e−kpte^{-k_p t}, with the completed fractional accumulation toward saturation, (1−e−kpt)(1 - e^{-k_p t}). In a saturation curve rising from f0f_0 to fmax⁡f_{\max}, the progress term must start at 00 at t=0t = 0 and grow toward 11 as t→∞t \to \infty.

REASONING PATH
Your ACEpath teacher’s suggested approach
Check Boundary Conditions at $t = 0$ and $t \to \infty$
  • For a quantity growing toward saturation, the term scaling (fmax⁡−f0)(f_{\max} - f_0) must evaluate to 00 at t=0t = 0 and to 11 as t→∞t \to \infty.

  • Always test t=0t = 0: if using e−kte^{-k t}, (fmax⁡−f0)e0=fmax⁡−f0(f_{\max} - f_0)e^0 = f_{\max} - f_0, which would mean maximum change has already happened at t=0t=0. To ensure zero change at t=0t = 0, you must use (1−e−kt)(1 - e^{-k t}).

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Evaluate the saturation factor: 1−e−2.40≈1−0.0907=0.90931 - e^{-2.40} \approx 1 - 0.0907 = 0.9093.

  2. Compute the shaded auxin fraction: fshaded(2.00)=0.500+0.220⋅0.9093≈0.700f_{\text{shaded}}(2.00) = 0.500 + 0.220 \cdot 0.9093 \approx 0.700.

  3. Substitute fshaded(2.00)=0.700f_{\text{shaded}}(2.00) = 0.700 into the elongation equation: v(2.00)=0.400⋅(1+2.50⋅[0.700−0.500])=0.400⋅1.500=0.600 mm/hv(2.00) = 0.400 \cdot (1 + 2.50 \cdot [0.700 - 0.500]) = 0.400 \cdot 1.500 = 0.600\text{ mm/h}.

Final answer

(a) v∞=0.620 mm/hv_{\infty} = 0.620\text{ mm/h}; (b) v(2.00 h)=0.600 mm/hv(2.00\text{ h}) = 0.600\text{ mm/h}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the distinction between exponential decay functions y(t)=y0e−kty(t) = y_0 e^{-kt} and asymptotic saturation functions y(t)=y0+Δy(1−e−kt)y(t) = y_0 + \Delta y (1 - e^{-kt}).

  • Practice checking initial and terminal conditions (t=0t=0 and t→∞t\to\infty) whenever modeling biological saturation kinetics.

OverviewACEpath Teacher's Diagnosis

03 The student omits the baseline rate multiplier v_base when computing elongation rates, treating the bracketed term alone as the velocity.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    fshaded=0.720f_{\text{shaded}} = 0.720

  2. Step 2

    v∞=1+2.50⋅(0.720−0.500)  ⟹  v∞=1+0.550=1.550 mm/hv_{\infty} = 1 + 2.50 \cdot (0.720 - 0.500) \implies v_{\infty} = 1 + 0.550 = 1.550\text{ mm/h}

    Correct

    v∞=vbase(1+2.50⋅[0.720−0.500])=0.400⋅1.550=0.620 mm/hv_{\infty} = v_{\text{base}} \left(1 + 2.50 \cdot [0.720 - 0.500]\right) = 0.400 \cdot 1.550 = 0.620\text{ mm/h}

    You evaluated the bracketed factor (1+2.50⋅[fshaded−0.500])\left(1 + 2.50 \cdot [f_{\text{shaded}} - 0.500]\right) accurately, but you forgot to multiply by the baseline elongation rate vbase=0.400 mm/hv_{\text{base}} = 0.400\text{ mm/h}.

  3. Step 3

    fshaded(2.00)=0.500+0.220⋅(1−e−2.40)=0.700f_{\text{shaded}}(2.00) = 0.500 + 0.220 \cdot (1 - e^{-2.40}) = 0.700

  4. Step 4

    v(2.00)=1+2.50⋅(0.700−0.500)  ⟹  v(2.00)=1+0.500=1.500 mm/hv(2.00) = 1 + 2.50 \cdot (0.700 - 0.500) \implies v(2.00) = 1 + 0.500 = 1.500\text{ mm/h}

    Correct

    v(2.00)=vbase(1+2.50⋅[0.700−0.500])=0.400⋅1.500=0.600 mm/hv(2.00) = v_{\text{base}} \left(1 + 2.50 \cdot [0.700 - 0.500]\right) = 0.400 \cdot 1.500 = 0.600\text{ mm/h}

    You calculated the relative amplification factor correctly as 1.5001.500, but omitted the dimensional prefactor vbase=0.400 mm/hv_{\text{base}} = 0.400\text{ mm/h}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the asymptotic limit of auxin accumulation as fmax⁡=0.720f_{\max} = 0.720.

You correctly evaluated the first-order exponential saturation equation at t=2.00 ht = 2.00\text{ h} to find fshaded(2.00)=0.700f_{\text{shaded}}(2.00) = 0.700.

You correctly applied the sensitivity formula within the parentheses to obtain the dimensionless relative growth factors.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omission of Baseline Multiplier

You left out the baseline velocity constant vbase=0.400 mm/hv_{\text{base}} = 0.400\text{ mm/h} and treated the dimensionless multiplier inside the parentheses as the final speed.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing a normalized relative scaling factor (1+kΔf)(1 + k \Delta f) with the dimensional physical quantity v=vbase(1+kΔf)v = v_{\text{base}}(1 + k \Delta f). Always check whether the bracketed expression has physical units or is a dimensionless scaling term that requires multiplication by the baseline rate.

REASONING PATH
Your ACEpath teacher’s suggested approach
Check Physical Dimensions
  • The expression inside the brackets, 1+2.50⋅[fshaded−0.500]1 + 2.50 \cdot [f_{\text{shaded}} - 0.500], is dimensionless because ff is a fraction.

  • Multiply the dimensionless factor by vbasev_{\text{base}} to obtain the correct velocity units of mm/h\text{mm/h}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. For part (a), scale the relative factor 1.5501.550 by vbasev_{\text{base}}: v∞=0.400 mm/h⋅1.550=0.620 mm/hv_{\infty} = 0.400\text{ mm/h} \cdot 1.550 = 0.620\text{ mm/h}.

  2. For part (b), scale the relative factor 1.5001.500 by vbasev_{\text{base}}: v(2.00)=0.400 mm/h⋅1.500=0.600 mm/hv(2.00) = 0.400\text{ mm/h} \cdot 1.500 = 0.600\text{ mm/h}.

Final answer

(a) v∞=0.620 mm/hv_{\infty} = 0.620\text{ mm/h}; (b) v(2.00 h)=0.600 mm/hv(2.00\text{ h}) = 0.600\text{ mm/h}

NEXT STEPS
Final Takeaways from Your Teacher
  • In physiological rate equations of the form R=R0(1+αΔC)R = R_0(1 + \alpha \Delta C), highlight R0R_0 so it is not dropped during substitution.

  • Perform dimensional analysis on intermediate terms before writing down final units.

Lock it in

Similar question

01

A coleoptile flank has an elongation rate governed by v=v0(1+2.00[f−0.500])v = v_0 (1 + 2.00[f - 0.500]), where v0=0.300 mm/hv_0 = 0.300\text{ mm/h}. If lateral auxin transport establishes a shaded-side fraction of f=0.650f = 0.650, find the steady-state elongation rate vv.

Answer

v=0.390 mm/hv = 0.390\text{ mm/h}. Key steps:

  1. Compute deviation: Δf=0.650−0.500=0.150\Delta f = 0.650 - 0.500 = 0.150.
  2. Sensitivity enhancement: 1+2.00(0.150)=1.3001 + 2.00(0.150) = 1.300.
  3. Multiply by baseline: v=0.300⋅1.300=0.390 mm/hv = 0.300 \cdot 1.300 = 0.390\text{ mm/h}.
02

In a gravitropic root curvature model, the lower flank auxin fraction accumulates to flower=0.680f_{\text{lower}} = 0.680. Because high auxin inhibits root cell growth, the elongation rate is given by v=vbase(1−1.80[flower−0.500])v = v_{\text{base}}(1 - 1.80[f_{\text{lower}} - 0.500]), with vbase=0.250 mm/hv_{\text{base}} = 0.250\text{ mm/h}. Calculate the lower flank elongation rate.

Answer

v=0.169 mm/hv = 0.169\text{ mm/h}. Key steps:

  1. Deviation from symmetric state: Δf=0.680−0.500=0.180\Delta f = 0.680 - 0.500 = 0.180.
  2. Inhibition factor: 1−1.80(0.180)=1−0.324=0.6761 - 1.80(0.180) = 1 - 0.324 = 0.676.
  3. Calculate rate: v=0.250⋅0.676=0.169 mm/hv = 0.250 \cdot 0.676 = 0.169\text{ mm/h}.
03

A hypocotyl exposed to unilateral light has shaded-side auxin fraction f(t)=0.500+0.250(1−e−0.800t)f(t) = 0.500 + 0.250(1 - e^{-0.800 t}). Elongation rate is v(t)=vbase(1+3.20[f(t)−0.500])v(t) = v_{\text{base}}(1 + 3.20[f(t) - 0.500]) with vbase=0.500 mm/hv_{\text{base}} = 0.500\text{ mm/h}. Calculate: (a) v(0)v(0), and (b) the elongation rate at t=1.50 ht = 1.50\text{ h}.

Answer

(a) v(0)=0.500 mm/hv(0) = 0.500\text{ mm/h}; (b) v(1.50 h)=0.779 mm/hv(1.50\text{ h}) = 0.779\text{ mm/h}. Key steps:

  1. At t=0t = 0, f(0)=0.500f(0) = 0.500, so [f(0)−0.500]=0  ⟹  v(0)=vbase=0.500 mm/h[f(0) - 0.500] = 0 \implies v(0) = v_{\text{base}} = 0.500\text{ mm/h}.
  2. At t=1.50 ht = 1.50\text{ h}, exponent is −0.800⋅1.50=−1.20-0.800 \cdot 1.50 = -1.20. Then 1−e−1.20=1−0.3012=0.69881 - e^{-1.20} = 1 - 0.3012 = 0.6988.
  3. Δf=f(1.50)−0.500=0.250⋅0.6988≈0.1747\Delta f = f(1.50) - 0.500 = 0.250 \cdot 0.6988 \approx 0.1747.
  4. v(1.50)=0.500(1+3.20⋅0.1747)=0.500(1+0.5590)=0.500⋅1.5590≈0.779 mm/hv(1.50) = 0.500(1 + 3.20 \cdot 0.1747) = 0.500(1 + 0.5590) = 0.500 \cdot 1.5590 \approx 0.779\text{ mm/h}.
Loading workspace…