Resources

A purified preparation of beta-galactosidase is tested in a reaction vessel. When the substrate lactose is added at a concentration of [S]=2.50 mM[\text{S}] = 2.50\text{ mM}, the measured initial velocity is v0=75.0 μmol/(L⋅min)v_0 = 75.0\,\mu\mathrm{mol}/(\text{L}\cdot\text{min}). When the reaction is run under saturating substrate conditions, the maximum velocity is determined to be Vmax⁡=125 μmol/(L⋅min)V_{\max} = 125\,\mu\mathrm{mol}/(\text{L}\cdot\text{min}). Assuming standard Michaelis-Menten kinetics with no inhibitors present, reverse-engineer this kinetic data to determine the Michaelis constant KmK_m of this enzyme for lactose.

Answer and steps

Final answer

Km=1.67 mMK_m = 1.67\text{ mM}

Steps

01

State the Michaelis-Menten Equation

The relationship between the initial reaction velocity (v0v_0), the maximum reaction velocity (Vmax⁡V_{\max}), the substrate concentration ([S][\text{S}]), and the Michaelis constant (KmK_m) is given by the Michaelis-Menten equation:

v0=Vmax⁡[S]Km+[S]v_0 = \frac{V_{\max}[\text{S}]}{K_m + [\text{S}]}

02

Rearrange the Equation to Solve for KmK_m

Multiply both sides by (Km+[S])(K_m + [\text{S}]) and isolate KmK_m:

v0(Km+[S])=Vmax⁡[S]v_0 (K_m + [\text{S}]) = V_{\max}[\text{S}]

v0Km+v0[S]=Vmax⁡[S]v_0 K_m + v_0 [\text{S}] = V_{\max}[\text{S}]

v0Km=Vmax⁡[S]−v0[S]v_0 K_m = V_{\max}[\text{S}] - v_0 [\text{S}]

Km=(Vmax⁡−v0)[S]v0=(Vmax⁡v0−1)[S]K_m = \frac{(V_{\max} - v_0)[\text{S}]}{v_0} = \left(\frac{V_{\max}}{v_0} - 1\right)[\text{S}]

Alternatively, express the fractional velocity directly: v0Vmax⁡=[S]Km+[S]\frac{v_0}{V_{\max}} = \frac{[\text{S}]}{K_m + [\text{S}]}

03

Substitute the Given Kinetic Parameters

From the problem statement:

  • [S]=2.50 mM[\text{S}] = 2.50\text{ mM}
  • v0=75.0 μmol/(L⋅min)v_0 = 75.0\text{ }\mu\text{mol}/(\text{L}\cdot\text{min})
  • Vmax⁡=125 μmol/(L⋅min)V_{\max} = 125\text{ }\mu\text{mol}/(\text{L}\cdot\text{min})

Substitute these values into the rearranged formula:

v0Vmax⁡=75.0125=0.60\frac{v_0}{V_{\max}} = \frac{75.0}{125} = 0.60

Setting this equal to the substrate fraction:

0.60=2.50 mMKm+2.50 mM0.60 = \frac{2.50\text{ mM}}{K_m + 2.50\text{ mM}}

0.60(Km+2.50 mM)=2.50 mM0.60(K_m + 2.50\text{ mM}) = 2.50\text{ mM}

0.60Km+1.50 mM=2.50 mM0.60 K_m + 1.50\text{ mM} = 2.50\text{ mM}

0.60Km=1.00 mM0.60 K_m = 1.00\text{ mM}

Km=1.00 mM0.60≈1.67 mMK_m = \frac{1.00\text{ mM}}{0.60} \approx 1.67\text{ mM}

(Common Pitfall: Ensure that v0v_0 and Vmax⁡V_{\max} are in identical units before taking the ratio, and note that KmK_m retains the concentration units of [S][\text{S}], which in this case is mM\text{mM}.)

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student inverts the velocity ratio when rearranging the Michaelis-Menten equation, calculating Km as [S] · (v₀ / Vmax - 1) or incorrectly setting Km + [S] = [S] · (v₀ / Vmax).

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    v0=Vmax⁡⋅[S]Km+[S]v_0 = \frac{V_{\max} \cdot [\text{S}]}{K_m + [\text{S}]}

  2. Step 2

    Km+[S]=[S]⋅(v0Vmax⁡)K_m + [\text{S}] = [\text{S}] \cdot \left(\frac{v_0}{V_{\max}}\right)

    Correct

    Km+[S]=[S]⋅(Vmax⁡v0)K_m + [\text{S}] = [\text{S}] \cdot \left(\frac{V_{\max}}{v_0}\right)

    When dividing both sides of v0(Km+[S])=Vmax⁡[S]v_0(K_m + [\text{S}]) = V_{\max}[\text{S}] by v0v_0, the ratio on the right side must be Vmax⁡v0\frac{V_{\max}}{v_0}, not v0Vmax⁡\frac{v_0}{V_{\max}}.

  3. Step 3

    Km+2.50=2.50⋅(75.0125)  ⟹  Km+2.50=1.50K_m + 2.50 = 2.50 \cdot \left(\frac{75.0}{125}\right) \implies K_m + 2.50 = 1.50

    Correct

    Km+2.50=2.50⋅(12575.0)  ⟹  Km+2.50=4.17K_m + 2.50 = 2.50 \cdot \left(\frac{125}{75.0}\right) \implies K_m + 2.50 = 4.17

    You substituted the values and carried out the arithmetic correctly based on your equation from the previous step, but the calculation was affected by the inverted ratio.

  4. Step 4

    Km=−1.00 mMK_m = -1.00\text{ mM}

    Correct

    Km=1.67 mMK_m = 1.67\text{ mM}

    Subtracting 2.502.50 from 1.501.50 yielded −1.00 mM-1.00\text{ mM}. A negative concentration or affinity constant is physically impossible, which signals an earlier algebraic error.

WHAT YOU DID WELL
Compliments from Your Teacher

You selected the correct Michaelis-Menten kinetic model.

You matched and substituted the given kinetic parameters with consistent units.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Algebraic inversion error

You accidentally inverted the velocity ratio as v0Vmax⁡\frac{v_0}{V_{\max}} instead of Vmax⁡v0\frac{V_{\max}}{v_0} when isolating the denominator term (Km+[S])(K_m + [\text{S}]).

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the fractional saturation formula v0Vmax⁡=[S]Km+[S]\frac{v_0}{V_{\max}} = \frac{[\text{S}]}{K_m + [\text{S}]} with the isolated denominator (Km+[S])(K_m + [\text{S}]). Because v0<Vmax⁡v_0 < V_{\max}, the ratio v0Vmax⁡<1\frac{v_0}{V_{\max}} < 1, which forced Km+[S]<[S]K_m + [\text{S}] < [\text{S}] and produced a negative KmK_m.

REASONING PATH
Your ACEpath teacher’s suggested approach
Cross-Multiplication Check
  • v0(Km+[S])=Vmax⁡[S]  ⟹  Km+[S]=[S](Vmax⁡v0)v_0(K_m + [\text{S}]) = V_{\max}[\text{S}] \implies K_m + [\text{S}] = [\text{S}]\left(\frac{V_{\max}}{v_0}\right)

  • Always cross-multiply terms completely before isolating an unknown in a denominator.

Physical Reality Check
  • KmK_m represents a substrate concentration and must always be positive (Km>0K_m > 0).

  • If your calculated KmK_m is negative or zero, recheck your algebraic rearrangement immediately.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Cross-multiply the Michaelis-Menten equation: v0(Km+[S])=Vmax⁡[S]v_0(K_m + [\text{S}]) = V_{\max}[\text{S}].

  2. Divide both sides by v0v_0: Km+[S]=[S](Vmax⁡v0)K_m + [\text{S}] = [\text{S}]\left(\frac{V_{\max}}{v_0}\right).

  3. Substitute the given values: Km+2.50 mM=2.50 mM⋅(12575.0)=2.50 mM⋅53≈4.17 mMK_m + 2.50\text{ mM} = 2.50\text{ mM} \cdot \left(\frac{125}{75.0}\right) = 2.50\text{ mM} \cdot \frac{5}{3} \approx 4.17\text{ mM}.

  4. Subtract [S][\text{S}] from both sides: Km=4.17 mM−2.50 mM≈1.67 mMK_m = 4.17\text{ mM} - 2.50\text{ mM} \approx 1.67\text{ mM}.

Final answer

Km=1.67 mMK_m = 1.67\text{ mM}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice isolating denominator variables by fully writing out the cross-multiplication step.

  • Check that whenever v0<Vmax⁡v_0 < V_{\max}, the factor multiplying [S][\text{S}] when finding (Km+[S])(K_m + [\text{S}]) must be greater than 11.

OverviewACEpath Teacher's Diagnosis

02 The student misidentifies Km as the substrate concentration when velocity is equal to the measured initial velocity v₀ rather than half of Vmax, or assumes Km is simply Vmax - v₀.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Km is the difference between maximum and initial velocity  ⟹  Km=Vmax⁡−v0\text{Km is the difference between maximum and initial velocity} \implies K_m = V_{\max} - v_0

    Correct

    v0=Vmax⁡[S]Km+[S]v_0 = \frac{V_{\max}[\text{S}]}{K_m + [\text{S}]}

    You defined KmK_m as the difference between Vmax⁡V_{\max} and v0v_0. However, KmK_m is the substrate concentration at which reaction velocity reaches 12Vmax⁡\frac{1}{2}V_{\max}, and it must be related to velocity via the Michaelis-Menten equation.

  2. Step 2

    Km=125−75.0  ⟹  Km=50.0 mMK_m = 125 - 75.0 \implies K_m = 50.0\text{ mM}

    Correct

    Km=(Vmax⁡−v0)[S]v0=(125−75.0)(2.50 mM)75.0≈1.67 mMK_m = \frac{(V_{\max} - v_0)[\text{S}]}{v_0} = \frac{(125 - 75.0)(2.50\text{ mM})}{75.0} \approx 1.67\text{ mM}

    Your arithmetic subtraction was carried out accurately, but because the governing formula was incorrect, your final calculated value for KmK_m is invalid.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly pulled the numerical values of Vmax⁡=125 \mumol/(L⋅min)V_{\max} = 125\text{ \mu mol}/(\text{L}\cdot\text{min}) and v0=75.0 \mumol/(L⋅min)v_0 = 75.0\text{ \mu mol}/(\text{L}\cdot\text{min}) from the problem statement.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Conceptual Definition Error

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused the Michaelis constant KmK_m with an arithmetic difference in reaction rates, overlooking that KmK_m has units of concentration and reflects the substrate concentration needed to achieve half-maximal velocity.

REASONING PATH
Your ACEpath teacher’s suggested approach
Physical Nature of $K_m$
  • KmK_m is a substrate concentration (expressed in mM\text{mM}, μM\mu\text{M}, etc.), not a rate or velocity.

  • Check your units before calculating: subtracting velocities (μmol/(L⋅min))(\mu\text{mol}/(\text{L}\cdot\text{min})) cannot directly yield a concentration (mM)(\text{mM}) without including [S][\text{S}].

The Michaelis-Menten Relation
  • v0=Vmax⁡[S]Km+[S]v_0 = \frac{V_{\max}[\text{S}]}{K_m + [\text{S}]}, which rearranges to Km=(Vmax⁡v0−1)[S]K_m = \left(\frac{V_{\max}}{v_0} - 1\right)[\text{S}].

  • Substitute all three known variables (v0v_0, Vmax⁡V_{\max}, and [S][\text{S}]) into the hyperbolic rate equation and isolate KmK_m algebraically.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set up the Michaelis-Menten equation: v0=Vmax⁡[S]Km+[S]v_0 = \frac{V_{\max}[\text{S}]}{K_m + [\text{S}]}.

  2. Isolate KmK_m: v0(Km+[S])=Vmax⁡[S]  ⟹  Km=(Vmax⁡−v0)[S]v0v_0(K_m + [\text{S}]) = V_{\max}[\text{S}] \implies K_m = \frac{(V_{\max} - v_0)[\text{S}]}{v_0}.

  3. Substitute the given parameters: Km=(125−75.0)(2.50 mM)75.0=50.0×2.50 mM75.0K_m = \frac{(125 - 75.0)(2.50\text{ mM})}{75.0} = \frac{50.0 \times 2.50\text{ mM}}{75.0}.

  4. Compute the final value: Km=12575.0 mM≈1.67 mMK_m = \frac{125}{75.0}\text{ mM} \approx 1.67\text{ mM}.

Final answer

Km≈1.67 mMK_m \approx 1.67\text{ mM}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the graphical definition of KmK_m on a Michaelis-Menten curve (v0v_0 vs. [S][\text{S}]) to anchor that KmK_m lies along the horizontal substrate concentration axis.

  • Practice isolating KmK_m algebraically from v0=Vmax⁡[S]Km+[S]v_0 = \frac{V_{\max}[\text{S}]}{K_m + [\text{S}]} until the manipulation becomes second nature.

OverviewACEpath Teacher's Diagnosis

03 The student forgets to distribute the initial velocity across both terms of the denominator when cross-multiplying, writing v₀ · Km + [S] instead of v₀ · (Km + [S]).

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    v0⋅(Km+[S])=Vmax⁡⋅[S]v_0 \cdot (K_m + [\text{S}]) = V_{\max} \cdot [\text{S}]

  2. Step 2

    75.0⋅Km+2.50=125⋅2.50  ⟹  75.0⋅Km+2.50=312.575.0 \cdot K_m + 2.50 = 125 \cdot 2.50 \implies 75.0 \cdot K_m + 2.50 = 312.5

    Correct

    75.0(Km+2.50)=125(2.50)  ⟹  75.0Km+187.5=312.575.0(K_m + 2.50) = 125(2.50) \implies 75.0 K_m + 187.5 = 312.5

    When expanding v0(Km+[S])v_0(K_m + [\text{S}]), you multiplied v0v_0 by KmK_m to get 75.0Km75.0 K_m, but you did not multiply v0v_0 by [S][\text{S}], writing +2.50+ 2.50 instead of +(75.0×2.50)=+187.5+ (75.0 \times 2.50) = + 187.5.

  3. Step 3

    75.0⋅Km=310  ⟹  Km=4.13 mM75.0 \cdot K_m = 310 \implies K_m = 4.13\text{ mM}

    Correct

    75.0Km=125.0  ⟹  Km=125.075.0≈1.67 mM75.0 K_m = 125.0 \implies K_m = \frac{125.0}{75.0} \approx 1.67\text{ mM}

    Your final subtraction and division followed logically from your previous expression, but the numerical answer is incorrect due to the missed distribution in step 2.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recalled the Michaelis-Menten kinetic model.

You accurately identified the given values for [S][\text{S}], v0v_0, and Vmax⁡V_{\max}.

You correctly set up the cross-multiplication step to isolate the unknown parameter.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Distributive property omission

You dropped the factor of 75.075.0 when expanding the second term inside the parentheses, leaving [S]=2.50[\text{S}] = 2.50 unmultiplied.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Incomplete expansion of algebraic parentheses during substitution, conflating a(b+c)a(b + c) with ab+cab + c.

REASONING PATH
Your ACEpath teacher’s suggested approach
Distribute Before Dropping Parentheses
  • a(b+c)=ab+aca(b + c) = ab + ac

  • Ensure that every term inside parentheses is multiplied by the external factor before removing the brackets.

Alternative Ratio Method
  • v0Vmax⁡=[S]Km+[S]\frac{v_0}{V_{\max}} = \frac{[\text{S}]}{K_m + [\text{S}]}

  • Calculate the fractional saturation first, 75.0125=0.60\frac{75.0}{125} = 0.60, giving 0.60(Km+2.50)=2.500.60(K_m + 2.50) = 2.50 to reduce large numerical products.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. 75.0(Km+2.50)=125(2.50)75.0(K_m + 2.50) = 125(2.50)

  2. 75.0Km+187.5=312.575.0 K_m + 187.5 = 312.5

  3. 75.0Km=312.5−187.5=125.075.0 K_m = 312.5 - 187.5 = 125.0

  4. Km=125.075.0=53 mM≈1.67 mMK_m = \frac{125.0}{75.0} = \frac{5}{3}\text{ mM} \approx 1.67\text{ mM}

Final answer

Km=1.67 mMK_m = 1.67\text{ mM}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice applying the distributive property explicitly whenever substituting quantities into grouped algebraic terms.

  • Try isolating KmK_m symbolically before inserting numerical values: Km=[S](Vmax⁡v0−1)K_m = [\text{S}]\left(\frac{V_{\max}}{v_0} - 1\right).

Lock it in

Similar question

01

An alkaline phosphatase reaction has a Vmax⁡V_{\max} of 200 \mumol/(L⋅min)200\text{ \mu mol}/(\text{L}\cdot\text{min}). When the substrate concentration is [S]=4.00 mM[\text{S}] = 4.00\text{ mM}, the measured initial velocity is v0=160 \mumol/(L⋅min)v_0 = 160\text{ \mu mol}/(\text{L}\cdot\text{min}). Calculate the Michaelis constant KmK_m.

Answer

Km=1.00 mMK_m = 1.00\text{ mM}. Key steps: Rearrange to Km=[S](Vmax⁡v0−1)=4.00 mM(200160−1)=4.00 mM(1.25−1)=1.00 mMK_m = [\text{S}]\left(\frac{V_{\max}}{v_0} - 1\right) = 4.00\text{ mM}\left(\frac{200}{160} - 1\right) = 4.00\text{ mM}(1.25 - 1) = 1.00\text{ mM}.

02

A mutant hexokinase enzyme has a KmK_m of 0.80 mM0.80\text{ mM} for glucose. What substrate concentration [S][\text{S}] is required for the enzyme to operate at exactly 80%80\% of its Vmax⁡V_{\max}?

Answer

[S]=3.20 mM[\text{S}] = 3.20\text{ mM}. Key steps: Since v0Vmax⁡=0.80\frac{v_0}{V_{\max}} = 0.80, use [S]Km+[S]=0.80  ⟹  [S]=0.80(Km+[S])  ⟹  0.20[S]=0.80Km  ⟹  [S]=4Km=4(0.80 mM)=3.20 mM\frac{[\text{S}]}{K_m + [\text{S}]} = 0.80 \implies [\text{S}] = 0.80(K_m + [\text{S}]) \implies 0.20[\text{S}] = 0.80 K_m \implies [\text{S}] = 4 K_m = 4(0.80\text{ mM}) = 3.20\text{ mM}.

03

A dehydrogenase exhibits Km=1.50 mMK_m = 1.50\text{ mM} and Vmax⁡=90.0 \mumol/(L⋅min)V_{\max} = 90.0\text{ \mu mol}/(\text{L}\cdot\text{min}). If the substrate concentration is increased from [S]1=1.50 mM[\text{S}]_1 = 1.50\text{ mM} to [S]2=6.00 mM[\text{S}]_2 = 6.00\text{ mM}, calculate the increase in reaction velocity Δv0\Delta v_0.

Answer

Δv0=27.0 \mumol/(L⋅min)\Delta v_0 = 27.0\text{ \mu mol}/(\text{L}\cdot\text{min}). Key steps: At [S]1=Km[\text{S}]_1 = K_m, v0,1=0.50Vmax⁡=45.0 \mumol/(L⋅min)v_{0,1} = 0.50 V_{\max} = 45.0\text{ \mu mol}/(\text{L}\cdot\text{min}). At [S]2=6.00 mM[\text{S}]_2 = 6.00\text{ mM}, v0,2=90.0×6.001.50+6.00=5407.50=72.0 \mumol/(L⋅min)v_{0,2} = \frac{90.0 \times 6.00}{1.50 + 6.00} = \frac{540}{7.50} = 72.0\text{ \mu mol}/(\text{L}\cdot\text{min}). Thus Δv0=72.0−45.0=27.0 \mumol/(L⋅min)\Delta v_0 = 72.0 - 45.0 = 27.0\text{ \mu mol}/(\text{L}\cdot\text{min}).

Loading workspace…