Resources

A microbiologist monitors a continuous chemostat culture of the nitrogen-fixing soil bacterium Rhizobium leguminosarum\textit{Rhizobium leguminosarum}. The culture expands from an initial inoculum of N0=1.50×104 cells/mLN_0 = 1.50 \times 10^4\text{ cells/mL} to a final density of Nt=9.60×105 cells/mLN_t = 9.60 \times 10^5\text{ cells/mL} over an elapsed incubation period of t=4.0 hourst = 4.0\text{ hours}. Rather than finding the total cell yield, determine the mean generation time (gg) in minutes for this strain.

Answer and steps

Final answer

g=40.0 ming = 40.0\text{ min}

Steps

Step 1: Relate Population Growth to the Number of Doublings

Bacterial populations in the exponential growth phase reproduce primarily through binary fission, where each cell divides into two daughter cells. The relationship between the initial density (N0N_0), the final density (NtN_t), and the number of generations or doublings (nn) is given by:

Nt=N0⋅2nN_t = N_0 \cdot 2^n

Rearranging to solve for the fold increase in cell density:

2n=NtN02^n = \frac{N_t}{N_0}


Step 2: Calculate the Number of Generations (nn)

Substitute the given values for N0N_0 and NtN_t:

2n=9.60×105 cells/mL1.50×104 cells/mL2^n = \frac{9.60 \times 10^5\text{ cells/mL}}{1.50 \times 10^4\text{ cells/mL}}

2n=642^n = 64

Recognizing that 64=2664 = 2^6:

n=6 generationsn = 6\text{ generations}

(Note: If the ratio is not an exact power of 2, nn can be calculated using logarithms: n=log⁡10(Nt/N0)log⁡10(2)n = \frac{\log_{10}(N_t / N_0)}{\log_{10}(2)}.)


Step 3: Convert the Total Time to Minutes

The total elapsed incubation time is given in hours:

t=4.0 hours=4.0×60 minutes=240 minutest = 4.0\text{ hours} = 4.0 \times 60\text{ minutes} = 240\text{ minutes}


Step 4: Calculate the Mean Generation Time (gg)

The mean generation time (gg, also known as the doubling time) is the average time required for the population to complete one generation:

g=tng = \frac{t}{n}

g=240 min6=40.0 ming = \frac{240\text{ min}}{6} = 40.0\text{ min}

Common Pitfall: Forgetting to convert the time units from hours to minutes can lead to an answer of 0.67 hours0.67\text{ hours} rather than the requested 40.0 minutes40.0\text{ minutes}. Additionally, ensure nn represents binary doublings (base 22), not natural logarithmic growth increments (base ee).

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets to convert the incubation time from hours to minutes, resulting in a generation time expressed incorrectly in hours as 0.67 instead of minutes.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    2n=9.60×1051.50×104=64  ⟹  n=62^n = \frac{9.60 \times 10^5}{1.50 \times 10^4} = 64 \implies n = 6

  2. Step 2

    g=4.06=0.67 minutesg = \frac{4.0}{6} = 0.67\text{ minutes}

    Correct

    t=4.0 h×60 min/h=240 min  ⟹  g=240 min6=40.0 mint = 4.0\text{ h} \times 60\text{ min/h} = 240\text{ min} \implies g = \frac{240\text{ min}}{6} = 40.0\text{ min}

    You divided t=4.0 hourst = 4.0\text{ hours} by n=6n = 6, which yields 0.67 hours0.67\text{ hours}, not 0.67 minutes0.67\text{ minutes}. To express the generation time in minutes as requested, you need to convert hours to minutes first (4.0 h=240 min4.0\text{ h} = 240\text{ min}) or convert the final result (0.67 h×60=40.0 min0.67\text{ h} \times 60 = 40.0\text{ min}).

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly applied the binary fission formula Nt=N0⋅2nN_t = N_0 \cdot 2^n to find the fold increase.

You correctly determined that 6464 doublings corresponds to n=6n = 6 generations.

You correctly identified the formula relating generation time to total time and number of generations as g=tng = \frac{t}{n}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omitted unit conversion

You substituted the elapsed time as 4.04.0 without converting from hours to minutes, but attached the unit 'minutes' to the result.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Conflating elapsed time units (tt in hours vs. target gg in minutes) during formula substitution without carrying out dimensional analysis or explicit unit tracking.

REASONING PATH
Your ACEpath teacher’s suggested approach
Track Units Explicitly in Formulas
  • Always write units alongside numerical values in substitutions, e.g., 4.0 hours6 generations=0.67 hours/gen\frac{4.0\text{ hours}}{6\text{ generations}} = 0.67\text{ hours/gen}.

  • Check whether the units resulting from your quotient match the target unit specified in the prompt before writing the final answer.

Convert Units Before or After Division
  • 1 hour=60 minutes1\text{ hour} = 60\text{ minutes}.

  • Either convert the total incubation time tt to minutes before dividing by nn, or multiply the resulting generation time in hours by 60 min/hour60\text{ min/hour}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert the total elapsed incubation time from hours to minutes: t=4.0 h×60 min/h=240 mint = 4.0\text{ h} \times 60\text{ min/h} = 240\text{ min}.

  2. Calculate the mean generation time in minutes using g=tng = \frac{t}{n}: g=240 min6=40.0 ming = \frac{240\text{ min}}{6} = 40.0\text{ min}.

Final answer

g=40.0 ming = 40.0\text{ min}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always write units into your fraction (e.g., 4.0 h6\frac{4.0\text{ h}}{6}) to immediately notice when your calculated unit does not match the requested unit.

  • Practice double-checking the required unit of measurement in the prompt before finalizing your answer.

OverviewACEpath Teacher's Diagnosis

02 The student inverts the formula for mean generation time by computing n / t instead of t / n, calculating the growth rate rather than generation time.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    2n=9.60×1051.50×104=64  ⟹  n=62^n = \frac{9.60 \times 10^5}{1.50 \times 10^4} = 64 \implies n = 6

  2. Step 2

    t=4.0 hours=240 minutest = 4.0\text{ hours} = 240\text{ minutes}

  3. Step 3

    g=nt=6240=0.025 minutesg = \frac{n}{t} = \frac{6}{240} = 0.025\text{ minutes}

    Correct

    g=tn=240 min6=40.0 ming = \frac{t}{n} = \frac{240\text{ min}}{6} = 40.0\text{ min}

    You inverted the formula for mean generation time. Generation time is the time required for one generation (time/generations\text{time}/\text{generations}, or g=t/ng = t/n), whereas n/tn/t yields the growth rate constant kk (generations/time\text{generations}/\text{time}).

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly applied the binary fission formula Nt=N0⋅2nN_t = N_0 \cdot 2^n to solve for the number of generations.

You converted the time unit accurately from hours to minutes before performing the final calculation.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Formula Inversion

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused the mean generation time (gg, measured in time per generation) with the mean growth rate constant (kk, measured in generations per unit time), leading to calculating n/tn/t rather than t/nt/n.

REASONING PATH
Your ACEpath teacher’s suggested approach
Unit Dimensional Check
  • Generation time represents the time elapsed per doubling, so its units must be minutes/generation\text{minutes}/\text{generation}.

  • Always verify that your formula's numerator has units of time (tt) and the denominator has units of generations (nn), giving g=tng = \frac{t}{n}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Use the definition of mean generation time: g=tng = \frac{t}{n}.

  2. Substitute t=240 mint = 240\text{ min} and n=6 generationsn = 6\text{ generations}: g=240 min6g = \frac{240\text{ min}}{6}.

  3. Divide to obtain the final value: g=40.0 ming = 40.0\text{ min}.

Final answer

g=40.0 ming = 40.0\text{ min}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the reciprocal relationship between generation time (g=t/ng = t/n) and the specific growth rate (k=n/tk = n/t).

  • Before finalizing an answer, inspect the physical units to confirm that time remains in the numerator for doubling time.

OverviewACEpath Teacher's Diagnosis

03 The student mistakenly treats exponential bacterial growth as linear by dividing the net cell density increase by time rather than solving for the number of doublings.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    ΔN=9.60×105−1.50×104=9.45×105 cells/mL\Delta N = 9.60 \times 10^5 - 1.50 \times 10^4 = 9.45 \times 10^5\text{ cells/mL}

    Correct

    2n=NtN0=9.60×1051.50×104=64=26  ⟹  n=6 generations2^n = \frac{N_t}{N_0} = \frac{9.60 \times 10^5}{1.50 \times 10^4} = 64 = 2^6 \implies n = 6\text{ generations}

    Bacterial populations multiply exponentially through binary fission (Nt=N0⋅2nN_t = N_0 \cdot 2^n). Subtracting initial density from final density gives the net cell increase, not the number of generations (nn).

  2. Step 2

    t=240 minutest = 240\text{ minutes}

  3. Step 3

    g=240945000=0.00025 minutesg = \frac{240}{945000} = 0.00025\text{ minutes}

    Correct

    g=tn=240 min6=40.0 ming = \frac{t}{n} = \frac{240\text{ min}}{6} = 40.0\text{ min}

    Because you divided total elapsed time by the net density change instead of the number of doublings (n=6n = 6), your resulting generation time was incorrect.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly converted the total elapsed incubation time of 4.0 hours4.0\text{ hours} into 240 minutes240\text{ minutes}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Linear vs. Exponential Growth Confusion

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated bacterial population growth as a linear addition of cells rather than multiplicative exponential growth via binary fission (Nt=N0⋅2nN_t = N_0 \cdot 2^n), leading you to divide elapsed time by ΔN\Delta N instead of the number of doublings nn.

REASONING PATH
Your ACEpath teacher’s suggested approach
Binary Fission Growth Relationship
  • Bacterial cell numbers double every generation according to Nt=N0⋅2nN_t = N_0 \cdot 2^n, meaning n=log⁡10(Nt/N0)log⁡10(2)n = \frac{\log_{10}(N_t/N_0)}{\log_{10}(2)}.

  • Always find the fold increase NtN0\frac{N_t}{N_0} and solve for the exponent nn before computing the generation time.

Mean Generation Time Definition
  • Generation time (gg) is defined as elapsed time divided by the number of generations: g=tng = \frac{t}{n}.

  • Ensure the denominator is the dimensionless number of generations (nn), never the change in cell concentration.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Find the fold increase in bacterial density: NtN0=9.60×1051.50×104=64\frac{N_t}{N_0} = \frac{9.60 \times 10^5}{1.50 \times 10^4} = 64.

  2. Solve for the number of doublings (nn) using 2n=64=262^n = 64 = 2^6, giving n=6 generationsn = 6\text{ generations}.

  3. Calculate mean generation time: g=tn=240 min6=40.0 ming = \frac{t}{n} = \frac{240\text{ min}}{6} = 40.0\text{ min}.

Final answer

g=40.0 ming = 40.0\text{ min}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the exponential growth model Nt=N0⋅2nN_t = N_0 \cdot 2^n for organisms reproducing by binary fission.

  • Practice calculating the number of generations nn using both exact powers of 2 and base-10 logarithms.

Lock it in

Similar question

01

A culture of Escherichia coli\textit{Escherichia coli} increases from 2.0×103 cells/mL2.0 \times 10^3\text{ cells/mL} to 1.28×105 cells/mL1.28 \times 10^5\text{ cells/mL} over an incubation span of 2.5 hours2.5\text{ hours}. Determine the generation time (gg) in minutes.

Answer

n=log⁡(1.28×105/2.0×103)log⁡(2)=log⁡(64)log⁡(2)=6 generationsn = \frac{\log(1.28 \times 10^5 / 2.0 \times 10^3)}{\log(2)} = \frac{\log(64)}{\log(2)} = 6\text{ generations}. Total time t=2.5 h×60 min/h=150 mint = 2.5\text{ h} \times 60\text{ min/h} = 150\text{ min}. Thus, g=150 min6=25.0 ming = \frac{150\text{ min}}{6} = 25.0\text{ min}.

02

A foodborne pathogen Salmonella enterica\textit{Salmonella enterica} grows from an initial titer of 5.0×102 CFU/mL5.0 \times 10^2\text{ CFU/mL} to 3.2×104 CFU/mL3.2 \times 10^4\text{ CFU/mL} in broth over 3.0 hours3.0\text{ hours}. What is the generation time in minutes?

Answer

Fold increase =3.2×1045.0×102=64=26= \frac{3.2 \times 10^4}{5.0 \times 10^2} = 64 = 2^6, so n=6n = 6. Total time t=3.0 h×60=180 mint = 3.0\text{ h} \times 60 = 180\text{ min}. Generation time g=180 min6=30.0 ming = \frac{180\text{ min}}{6} = 30.0\text{ min}.

03

In a bioreactor, a bacterial population undergoes exponential growth with a mean generation time of g=45 ming = 45\text{ min}. If the culture incubates for 6.0 hours6.0\text{ hours}, by what total fold factor (2n2^n) does the population density increase?

Answer

Total time t=6.0 h×60 min/h=360 mint = 6.0\text{ h} \times 60\text{ min/h} = 360\text{ min}. Number of generations n=tg=360 min45 min=8n = \frac{t}{g} = \frac{360\text{ min}}{45\text{ min}} = 8. The fold increase is 28=2562^8 = 256.

Loading workspace…