Resources

A wild-type bacterial enzyme has a specific activity of 120 μmol/(min⋅mg)120\,\mu\mathrm{mol}/(\text{min}\cdot\text{mg}). A point mutation causes a missense substitution of a single basic lysine residue located in the catalytic triad to a neutral alanine residue, leaving enzyme expression levels identical at 2.5 mg/mL2.5\text{ mg/mL}. If the mutant enzyme exhibits a residual specific activity of 4.8 μmol/(min⋅mg)4.8\,\mu\mathrm{mol}/(\text{min}\cdot\text{mg}), calculate: (a) the percentage decrease in specific activity resulting from this substitution, and (b) the initial reaction velocity v0v_0 (in mM/min\text{mM}/\text{min}) of a 1.0 mL1.0\text{ mL} assay containing 0.050 mg0.050\text{ mg} of the mutant enzyme.

Answer and steps

Final answer

(a) 96.0%96.0\% decrease; (b) v0=0.24 mM/minv_0 = 0.24\text{ mM}/\text{min}

Steps

Part (a): Percentage Decrease in Specific Activity

  1. Identify the initial and mutant specific activities:

    • Wild-type specific activity (SAwt\text{SA}_{\text{wt}}): 120 μmol/(min⋅mg)120\text{ }\mu\text{mol}/(\text{min}\cdot\text{mg})
    • Mutant specific activity (SAmut\text{SA}_{\text{mut}}): 4.8 μmol/(min⋅mg)4.8\text{ }\mu\text{mol}/(\text{min}\cdot\text{mg})
  2. Calculate the reduction in specific activity: ΔSA=SAwt−SAmut=120−4.8=115.2 μmol/(min⋅mg)\Delta \text{SA} = \text{SA}_{\text{wt}} - \text{SA}_{\text{mut}} = 120 - 4.8 = 115.2\text{ }\mu\text{mol}/(\text{min}\cdot\text{mg})
  3. Compute the percentage decrease: Percentage decrease=(ΔSASAwt)×100%=(115.2120)×100%=96.0%\text{Percentage decrease} = \left(\frac{\Delta \text{SA}}{\text{SA}_{\text{wt}}}\right) \times 100\% = \left(\frac{115.2}{120}\right) \times 100\% = 96.0\%

Part (b): Initial Reaction Velocity (v0v_0)

  1. Calculate the total enzymatic reaction rate in the assay: The total rate of product formation per minute is the product of the mutant enzyme's specific activity and the mass of enzyme added to the assay: Rate=SAmut⋅menzyme=4.8 μmol/(min⋅mg)⋅0.050 mg=0.24 μmol/min\text{Rate} = \text{SA}_{\text{mut}} \cdot m_{\text{enzyme}} = 4.8\text{ }\mu\text{mol}/(\text{min}\cdot\text{mg}) \cdot 0.050\text{ mg} = 0.24\text{ }\mu\text{mol/min}
  2. Convert total reaction rate to concentration change per unit time (v0v_0): The reaction volume is V=1.0 mL=1.0×10−3 LV = 1.0\text{ mL} = 1.0 \times 10^{-3}\text{ L}. Dividing the rate by the assay volume gives the velocity in terms of molar concentration: v0=RateV=0.24 μmol/min1.0 mL=0.24 μmol/(mL⋅min)v_0 = \frac{\text{Rate}}{V} = \frac{0.24\text{ }\mu\text{mol/min}}{1.0\text{ mL}} = 0.24\text{ }\mu\text{mol}/(\text{mL}\cdot\text{min})

    Recall that: 1 μmol/mL=10−6 mol10−3 L=10−3 mol/L=1 mM1\text{ }\mu\text{mol}/\text{mL} = \frac{10^{-6}\text{ mol}}{10^{-3}\text{ L}} = 10^{-3}\text{ mol/L} = 1\text{ mM}

    Therefore: v0=0.24 mM/minv_0 = 0.24\text{ mM/min}

Common Pitfall: The enzyme stock concentration of 2.5 mg/mL2.5\text{ mg/mL} demonstrates that the mutation did not impair protein synthesis or stability, but it is not directly needed for the calculation because the exact mass of enzyme (0.050 mg0.050\text{ mg}) in the assay is already given.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student calculates the residual activity percentage rather than the percentage decrease from the wild-type value.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Percentage decrease=(4.8120)×100%=4%\text{Percentage decrease} = \left(\frac{4.8}{120}\right) \times 100\% = 4\%

    Correct

    Percentage decrease=(120−4.8120)×100%=96.0%\text{Percentage decrease} = \left(\frac{120 - 4.8}{120}\right) \times 100\% = 96.0\%

    You calculated the fraction of activity remaining (residual activity) rather than the amount lost. To find the percentage decrease, subtract the mutant activity from the wild-type activity first, or subtract the residual percentage from 100%100\%.

  2. Step 2

    Total activity=4.8×0.050=0.24 μmol/min  ⟹  v0=0.24 μmol/min1.0 mL=0.24 mM/min\text{Total activity} = 4.8 \times 0.050 = 0.24\text{ }\mu\text{mol/min} \implies v_0 = \frac{0.24\text{ }\mu\text{mol/min}}{1.0\text{ mL}} = 0.24\text{ mM/min}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the relevant values for both the wild-type and mutant specific activities.

You accurately calculated the total reaction rate from specific activity and enzyme mass.

You performed the unit conversion between μmol/mL\mu\text{mol}/\text{mL} and mM\text{mM} flawlessly.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Residual versus reduction confusion

You set up the ratio using the final remaining activity alone instead of the difference between the initial and final values.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing residual fraction (what remains, finalinitial\frac{\text{final}}{\text{initial}}) with percentage decrease (what was lost, initial−finalinitial\frac{\text{initial} - \text{final}}{\text{initial}}).

REASONING PATH
Your ACEpath teacher’s suggested approach
Define Percentage Decrease
  • Percentage decrease=initial−finalinitial×100%=100%−residual%\text{Percentage decrease} = \frac{\text{initial} - \text{final}}{\text{initial}} \times 100\% = 100\% - \text{residual}\%

  • Always verify whether the question asks for the remaining activity or the loss in activity before reporting your answer.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Subtract the mutant specific activity from the wild-type specific activity: ΔSA=120−4.8=115.2 μmol/(min⋅mg)\Delta\text{SA} = 120 - 4.8 = 115.2\text{ }\mu\text{mol}/(\text{min}\cdot\text{mg}).

  2. Divide this loss by the original wild-type activity: 115.2120×100%=96.0%\frac{115.2}{120} \times 100\% = 96.0\%.

Final answer

(a) 96.0%96.0\% decrease; (b) v0=0.24 mM/minv_0 = 0.24\text{ mM/min}

NEXT STEPS
Final Takeaways from Your Teacher
  • Double-check phrasing in kinetics problems: distinguish 'retains X%X\% activity' from 'activity decreased by Y%Y\%.'

  • Practice using the identity % decrease=100%−% residual\%\text{ decrease} = 100\% - \%\text{ residual} as a quick self-check.

OverviewACEpath Teacher's Diagnosis

02 The student erroneously divides by the final mutant activity instead of the original wild-type activity when calculating the percentage change.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Decrease=120−4.8=115.2\text{Decrease} = 120 - 4.8 = 115.2

  2. Step 2

    Percentage decrease=(115.24.8)×100%=2400%\text{Percentage decrease} = \left(\frac{115.2}{4.8}\right) \times 100\% = 2400\%

    Correct

    Percentage decrease=(115.2120)×100%=96.0%\text{Percentage decrease} = \left(\frac{115.2}{120}\right) \times 100\% = 96.0\%

    You divided by the final mutant specific activity (4.84.8) instead of the initial baseline wild-type activity (120120). A percentage decrease cannot exceed 100%100\% of the starting value.

  3. Step 3

    Total activity=4.8×0.050=0.24 μmol/min\text{Total activity} = 4.8 \times 0.050 = 0.24\text{ }\mu\text{mol/min}

  4. Step 4

    v0=0.24 μmol/min1.0 mL=0.24 mM/minv_0 = \frac{0.24\text{ }\mu\text{mol/min}}{1.0\text{ mL}} = 0.24\text{ mM/min}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the absolute change in specific activity.

You accurately calculated the total enzymatic rate and converted it into initial velocity with proper units.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Baseline value error in percentage change formula

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You chose the final (mutant) state rather than the initial reference (wild-type) state as the reference baseline in the denominator of the percentage decrease formula.

REASONING PATH
Your ACEpath teacher’s suggested approach
Percentage change baseline
  • Percentage change=final−initialinitial×100%\text{Percentage change} = \frac{\text{final} - \text{initial}}{\text{initial}} \times 100\%

  • Always identify the unperturbed starting state (here, the wild-type activity) and place that value in the denominator.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Percentage decrease=(Initial−FinalInitial)×100%=(115.2120)×100%\text{Percentage decrease} = \left(\frac{\text{Initial} - \text{Final}}{\text{Initial}}\right) \times 100\% = \left(\frac{115.2}{120}\right) \times 100\%

  2. Percentage decrease=0.96×100%=96.0%\text{Percentage decrease} = 0.96 \times 100\% = 96.0\%

Final answer

(a) 96.0%96.0\% decrease; (b) v0=0.24 mM/minv_0 = 0.24\text{ mM/min}

NEXT STEPS
Final Takeaways from Your Teacher
  • When calculating percentage decrease or loss of function, double-check that the denominator represents the original baseline (wild-type) rather than the final residual value.

  • Perform a sanity check: an absolute decrease of a positive quantity to a lower positive quantity must always yield a percentage decrease between 0%0\% and 100%100\%.

OverviewACEpath Teacher's Diagnosis

03 The student misinterprets the unit conversion between micromolar per minute and millimolar per minute by dividing by 1000 a second time.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Decrease=120−4.8=115.2 \mumol/(min⋅mg)  ⟹  Percentage decrease=(115.2120)×100%=96%\text{Decrease} = 120 - 4.8 = 115.2\text{ \mu mol}/(\text{min}\cdot\text{mg}) \implies \text{Percentage decrease} = \left(\frac{115.2}{120}\right) \times 100\% = 96\%

  2. Step 2

    Rate=4.8×0.050=0.24 \mumol/min\text{Rate} = 4.8 \times 0.050 = 0.24\text{ \mu mol/min}

  3. Step 3

    Concentration rate=0.24 \mumol/(mL⋅min)=240 \muM/min\text{Concentration rate} = 0.24\text{ \mu mol}/(\text{mL}\cdot\text{min}) = 240\text{ \mu M/min}

  4. Step 4

    v0=240/1000000=0.00024 mM/minv_0 = 240 / 1000000 = 0.00024\text{ mM/min}

    Correct

    v0=240 \muM/min1000 \muM/mM=0.24 mM/minv_0 = \frac{240\text{ \mu M/min}}{1000\text{ \mu M/mM}} = 0.24\text{ mM/min}

    You divided by 10610^6 instead of 10310^3. Converting micromolar (\muM\text{\mu M}) to millimolar (mM\text{mM}) requires dividing by 1,0001{,}000, because 1 mM=103 \muM1\text{ mM} = 10^3\text{ \mu M}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the percentage loss of specific activity caused by the active-site substitution.

You correctly calculated the total micromoles converted per minute from specific activity and enzyme mass.

You correctly converted the amount concentration per unit volume to micromolar units.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Unit conversion prefix error

Dividing by 1,000,0001{,}000{,}000 instead of 1,0001{,}000 to convert from micromolar to millimolar.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You used the conversion factor between micro- and base molarity (1 M=106 \muM1\text{ M} = 10^6\text{ \mu M}) instead of the conversion factor between micro- and milli- (1 mM=103 \muM1\text{ mM} = 10^3\text{ \mu M}).

REASONING PATH
Your ACEpath teacher’s suggested approach
Metric prefix step sizes
  • Milli- (10−310^{-3}) and micro- (10−610^{-6}) differ by a factor of 10310^3 (1,0001{,}000), not 10610^6.

  • Check whether your target prefix is molar (M\text{M}) or millimolar (mM\text{mM}) before selecting the factor of 10310^3 or 10610^6.

Direct unit equivalence
  • 1 \mumol/mL=10−6 mol10−3 L=10−3 mol/L=1 mM1\text{ \mu mol/mL} = \frac{10^{-6}\text{ mol}}{10^{-3}\text{ L}} = 10^{-3}\text{ mol/L} = 1\text{ mM}.

  • Use 1 \mumol/mL≡1 mM1\text{ \mu mol/mL} \equiv 1\text{ mM} directly to avoid unnecessary intermediate conversions.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Recall that 1 mM=1000 \muM1\text{ mM} = 1000\text{ \mu M}, so to convert from \muM\text{\mu M} to mM\text{mM}, divide by 10001000.

  2. v0=240 \muM/min1000 \muM/mM=0.24 mM/minv_0 = \frac{240\text{ \mu M/min}}{1000\text{ \mu M/mM}} = 0.24\text{ mM/min}.

Final answer

(a) 96.0%96.0\% decrease; (b) v0=0.24 mM/minv_0 = 0.24\text{ mM/min}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review prefix relations: 1 M=103 mM=106 \muM1\text{ M} = 10^3\text{ mM} = 10^6\text{ \mu M}.

  • Remember that \mumol/mL\text{\mu mol/mL} is directly equivalent to mmol/L\text{mmol/L} (extmM ext{mM}).

  • Practice converting reaction velocities between \muM/s\text{\mu M/s}, \muM/min\text{\mu M/min}, and mM/min\text{mM/min}.

Lock it in

Similar question

01

A wild-type phosphatase exhibits a specific activity of 80 μmol/(min⋅mg)80\text{ }\mu\text{mol}/(\text{min}\cdot\text{mg}). An active-site substitution decreases this value to 12 μmol/(min⋅mg)12\text{ }\mu\text{mol}/(\text{min}\cdot\text{mg}). Calculate: (a) the percentage of residual specific activity, and (b) the percentage decrease in specific activity.

Answer

(a) Residual activity =(1280)×100%=15.0%= \left(\frac{12}{80}\right) \times 100\% = 15.0\%. (b) Percentage decrease =100%−15.0%=85.0%= 100\% - 15.0\% = 85.0\% (or 80−1280×100%=85.0%\frac{80 - 12}{80} \times 100\% = 85.0\%).

02

A recombinant dehydrogenase has a wild-type specific activity of 250 μmol/(min⋅mg)250\text{ }\mu\text{mol}/(\text{min}\cdot\text{mg}). A missense mutation reduces its specific activity by 92.0%92.0\%. Calculate: (a) the residual specific activity of the mutant enzyme, and (b) the initial reaction velocity v0v_0 (in mM/min\text{mM/min}) of a 2.0 mL2.0\text{ mL} assay containing 0.040 mg0.040\text{ mg} of this mutant enzyme.

Answer

(a) Residual SA=250×(1−0.92)=20.0 μmol/(min⋅mg)\text{Residual SA} = 250 \times (1 - 0.92) = 20.0\text{ }\mu\text{mol}/(\text{min}\cdot\text{mg}). (b) Total rate=20.0 μmol/(min⋅mg)×0.040 mg=0.80 μmol/min\text{Total rate} = 20.0\text{ }\mu\text{mol}/(\text{min}\cdot\text{mg}) \times 0.040\text{ mg} = 0.80\text{ }\mu\text{mol/min}. v0=0.80 μmol/min2.0 mL=0.40 μmol/(mL⋅min)=0.40 mM/minv_0 = \frac{0.80\text{ }\mu\text{mol/min}}{2.0\text{ mL}} = 0.40\text{ }\mu\text{mol}/(\text{mL}\cdot\text{min}) = 0.40\text{ mM/min}.

03

Two separate missense mutations in an enzyme's substrate-binding pocket were analyzed. Mutant A has a residual specific activity of 18 μmol/(min⋅mg)18\text{ }\mu\text{mol}/(\text{min}\cdot\text{mg}), representing a 70%70\% decrease from the wild-type. Mutant B has a specific activity of 3.0 μmol/(min⋅mg)3.0\text{ }\mu\text{mol}/(\text{min}\cdot\text{mg}). Determine: (a) the wild-type specific activity, and (b) the percentage decrease in specific activity caused by Mutant B relative to the wild-type.

Answer

(a) Since Mutant A retains 100%−70%=30%100\% - 70\% = 30\% of wild-type activity: SAwt=180.30=60 μmol/(min⋅mg)\text{SA}_{\text{wt}} = \frac{18}{0.30} = 60\text{ }\mu\text{mol}/(\text{min}\cdot\text{mg}). (b) For Mutant B: ΔSA=60−3.0=57.0 μmol/(min⋅mg)\Delta\text{SA} = 60 - 3.0 = 57.0\text{ }\mu\text{mol}/(\text{min}\cdot\text{mg}). Percentage decrease=(57.060)×100%=95.0%\text{Percentage decrease} = \left(\frac{57.0}{60}\right) \times 100\% = 95.0\%.

Loading workspace…