Resources

A culture of baker's yeast (Saccharomyces  cerevisiaeSaccharomyces\;cerevisiae) is grown under two separate conditions starting from identical initial amounts of glucose: Condition A is fully aerobic, and Condition B is strictly anaerobic. Under standard cellular conditions, complete aerobic respiration yields approximately 30 to 32 mol ATP30\text{ to }32\text{ mol ATP} per mole of glucose consumed (use 32 mol ATP/mol glucose32\text{ mol ATP/mol glucose} for theoretical maximum yield), whereas anaerobic ethanol fermentation yields 2 mol ATP2\text{ mol ATP} per mole of glucose. If both cultures completely metabolize 4.50×10−3 mol4.50\times 10^{-3}\text{ mol} of glucose, calculate: (a) the net moles of ATP\text{ATP} generated under aerobic conditions, (b) the net moles of ATP\text{ATP} generated under anaerobic conditions, and (c) the ratio of ATP\text{ATP} produced aerobically to that produced anaerobically per mole of glucose.

Answer and steps

Final answer

(a) 1.44×10−1 mol ATP1.44\times 10^{-1}\text{ mol ATP}, (b) 9.00×10−3 mol ATP9.00\times 10^{-3}\text{ mol ATP}, (c) 16:116:1 (or 1616)

Steps

01

Understand the stoichiometric yields of ATP

During cellular respiration, glucose (CX6HX12OX6\ce{C6H12O6}) is broken down to release energy, which cells capture in the form of adenosine triphosphate (ATP\text{ATP}):

  • Aerobic respiration: Glucose undergoes glycolysis, the citric acid cycle (Krebs cycle), and oxidative phosphorylation in the presence of oxygen (OX2\ce{O2}), producing a high theoretical yield: Aerobic yield=32 mol ATP per mol glucose\text{Aerobic yield} = 32\text{ mol ATP per mol glucose}
  • Anaerobic fermentation (Ethanol fermentation in yeast): Without oxygen, the electron transport chain cannot function. Yeast cells rely solely on glycolysis followed by fermentation to regenerate NADX+\ce{NAD+}, yielding only substrate-level phosphorylation products: Anaerobic yield=2 mol ATP per mol glucose\text{Anaerobic yield} = 2\text{ mol ATP per mol glucose}

02

Calculate the net ATP generated under aerobic conditions (Part a)

Multiply the moles of glucose consumed by the theoretical yield for aerobic respiration: nATP, aerobic=nglucose⋅(aerobic yield)n_{\text{ATP, aerobic}} = n_{\text{glucose}} \cdot (\text{aerobic yield})

nATP, aerobic=(4.50×10−3 mol glucose)⋅(32 mol ATP/mol glucose)n_{\text{ATP, aerobic}} = (4.50 \times 10^{-3}\text{ mol glucose}) \cdot \left(32\text{ mol ATP/mol glucose}\right)

nATP, aerobic=144×10−3 mol ATP=1.44×10−1 mol ATPn_{\text{ATP, aerobic}} = 144 \times 10^{-3}\text{ mol ATP} = 1.44 \times 10^{-1}\text{ mol ATP}


03

Calculate the net ATP generated under anaerobic conditions (Part b)

Multiply the moles of glucose consumed by the yield for anaerobic fermentation: nATP, anaerobic=nglucose⋅(anaerobic yield)n_{\text{ATP, anaerobic}} = n_{\text{glucose}} \cdot (\text{anaerobic yield})

nATP, anaerobic=(4.50×10−3 mol glucose)⋅(2 mol ATP/mol glucose)n_{\text{ATP, anaerobic}} = (4.50 \times 10^{-3}\text{ mol glucose}) \cdot \left(2\text{ mol ATP/mol glucose}\right)

nATP, anaerobic=9.00×10−3 mol ATPn_{\text{ATP, anaerobic}} = 9.00 \times 10^{-3}\text{ mol ATP}


04

Determine the ratio of aerobic to anaerobic ATP production (Part c)

Divide the aerobic ATP yield per mole of glucose by the anaerobic ATP yield per mole of glucose: Ratio=Aerobic ATP per mol glucoseAnaerobic ATP per mol glucose=32 mol ATP2 mol ATP=161=16:1 (or 16)\text{Ratio} = \frac{\text{Aerobic ATP per mol glucose}}{\text{Anaerobic ATP per mol glucose}} = \frac{32\text{ mol ATP}}{2\text{ mol ATP}} = \frac{16}{1} = 16:1\text{ (or } 16\text{)}

(Common Pitfall: Ensure the ratio compares ATP per mole of glucose directly, or the total amounts from parts (a) and (b): 1.44×10−1 mol9.00×10−3 mol=16\frac{1.44 \times 10^{-1}\text{ mol}}{9.00 \times 10^{-3}\text{ mol}} = 16. The ratio is identical regardless of sample size because the initial glucose amounts are equal.)

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student misuses the lower boundary of the estimated range (30 mol ATP/mol glucose) instead of the specified theoretical maximum yield of 32 mol ATP/mol glucose.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    ATPaerobic=4.50×10−3 mol×30 mol ATP/mol  ⟹  ATPaerobic=0.135 mol\text{ATP}_{\text{aerobic}} = 4.50 \times 10^{-3}\text{ mol} \times 30\text{ mol ATP/mol} \implies \text{ATP}_{\text{aerobic}} = 0.135\text{ mol}

    Correct

    ATPaerobic=(4.50×10−3 mol)×(32 mol ATP/mol)=1.44×10−1 mol ATP\text{ATP}_{\text{aerobic}} = (4.50 \times 10^{-3}\text{ mol}) \times (32\text{ mol ATP/mol}) = 1.44 \times 10^{-1}\text{ mol ATP}

    The problem prompt explicitly directed you to use the theoretical maximum yield of 32 mol ATP/mol glucose32\text{ mol ATP/mol glucose}, but you used the lower bound value of 30 mol ATP/mol30\text{ mol ATP/mol}.

  2. Step 2

    ATPanaerobic=4.50×10−3 mol×2 mol ATP/mol  ⟹  ATPanaerobic=0.00900 mol\text{ATP}_{\text{anaerobic}} = 4.50 \times 10^{-3}\text{ mol} \times 2\text{ mol ATP/mol} \implies \text{ATP}_{\text{anaerobic}} = 0.00900\text{ mol}

  3. Step 3

    Ratio=302  ⟹  Ratio=15\text{Ratio} = \frac{30}{2} \implies \text{Ratio} = 15

    Correct

    Ratio=322=16 (or 16:1)\text{Ratio} = \frac{32}{2} = 16\text{ (or } 16:1\text{)}

    Your ratio setup and division were mathematically consistent with your earlier value, but the result was affected by substituting 3030 instead of 3232.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recognized that total ATP generated is found by multiplying moles of glucose consumed by the molar ATP yield.

You accurately carried out the calculation for anaerobic ethanol fermentation in part (b).

You understood that the ratio of ATP production can be directly evaluated by dividing the molar yields.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Given condition overlooked

You selected the lower end of the reference range (30) instead of the parenthetically specified target value (32).

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Overlooking parenthetical specifications in multi-part problem statements, leading to using the wrong constant from a stated physiological range.

REASONING PATH
Your ACEpath teacher’s suggested approach
Check Problem Constraints
  • When a problem provides both an empirical range (e.g., 30 to 3230\text{ to }32) and an explicit parenthetical directive (e.g., 'use 3232 for theoretical maximum'), always adopt the specified value.

  • Scan the prompt text for explicit instructions like 'use X' before writing down your calculation constants.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Substitute the specified theoretical yield: nATP, aerobic=(4.50×10−3 mol)×(32 mol ATP/mol)=1.44×10−1 mol ATPn_{\text{ATP, aerobic}} = (4.50 \times 10^{-3}\text{ mol}) \times (32\text{ mol ATP/mol}) = 1.44 \times 10^{-1}\text{ mol ATP}.

  2. Recompute the ratio using the corrected aerobic yield: Ratio=322=16\text{Ratio} = \frac{32}{2} = 16 (or 16:116:1).

Final answer

(a) 1.44×10−1 mol ATP1.44 \times 10^{-1}\text{ mol ATP}, (b) 9.00×10−3 mol ATP9.00 \times 10^{-3}\text{ mol ATP}, (c) 16:116:1 (or 1616)

NEXT STEPS
Final Takeaways from Your Teacher
  • Underline or highlight explicit modeling instructions (such as 'use 32') when reading problem prompts.

  • Express answers in consistent scientific notation when input data is given in scientific notation.

OverviewACEpath Teacher's Diagnosis

02 The student inverts the ratio requested in part (c), calculating anaerobic-to-aerobic yield instead of aerobic-to-anaerobic yield.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    ATPaerobic=4.50×10−3 mol×32 mol ATP/mol  ⟹  ATPaerobic=0.144 mol\text{ATP}_{\text{aerobic}} = 4.50 \times 10^{-3}\,\text{mol} \times 32\,\text{mol ATP/mol} \implies \text{ATP}_{\text{aerobic}} = 0.144\,\text{mol}

  2. Step 2

    ATPanaerobic=4.50×10−3 mol×2 mol ATP/mol  ⟹  ATPanaerobic=0.00900 mol\text{ATP}_{\text{anaerobic}} = 4.50 \times 10^{-3}\,\text{mol} \times 2\,\text{mol ATP/mol} \implies \text{ATP}_{\text{anaerobic}} = 0.00900\,\text{mol}

  3. Step 3

    Ratio=2/32  ⟹  Ratio=0.0625\text{Ratio} = 2/32 \implies \text{Ratio} = 0.0625

    Correct

    Ratio=Aerobic yieldAnaerobic yield=322=16 (or 16:1)\text{Ratio} = \frac{\text{Aerobic yield}}{\text{Anaerobic yield}} = \frac{32}{2} = 16\text{ (or } 16:1\text{)}

    The question asked for the ratio of ATP\text{ATP} produced aerobically to anaerobically (A to B=A/BA \text{ to } B = A/B). You set up the fraction as anaerobic/aerobic=2/32\text{anaerobic}/\text{aerobic} = 2/32 rather than aerobic/anaerobic=32/2\text{aerobic}/\text{anaerobic} = 32/2.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly applied the theoretical stoichiometry of 32 mol ATP/mol glucose32\,\text{mol ATP/mol glucose} for aerobic respiration and 2 mol ATP/mol glucose2\,\text{mol ATP/mol glucose} for anaerobic fermentation.

You accurately carried out the molar multiplications and tracked significant figures in parts (a) and (b).

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverted Ratio Order

You wrote 232\frac{2}{32} instead of 322\frac{32}{2} when evaluating the ratio of aerobic to anaerobic yield.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Misinterpreting the phrasing 'ratio of X to Y', which mathematically corresponds to XY\frac{X}{Y} (numerator XX, denominator YY), leading to an inverted fraction.

REASONING PATH
Your ACEpath teacher’s suggested approach
Translating 'Ratio of A to B'
  • In scientific and mathematical word problems, the 'ratio of AA to BB' is always written as AB\frac{A}{B} or A:BA : B.

  • Identify the quantity mentioned before the word 'to' and place it in the numerator, then place the quantity mentioned after 'to' in the denominator.

Biological Sense Check on Energy Yield
  • Aerobic respiration is substantially more efficient at extracting energy from glucose than anaerobic fermentation.

  • Verify that a ratio comparing aerobic to anaerobic output yields a value greater than 11, reflecting the higher efficiency of aerobic metabolism.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the order of terms requested: 'ratio of aerobic to anaerobic'.

  2. Write the ratio formula: Ratio=Aerobic ATPAnaerobic ATP\text{Ratio} = \frac{\text{Aerobic ATP}}{\text{Anaerobic ATP}}.

  3. Substitute the molar yields: Ratio=322=16\text{Ratio} = \frac{32}{2} = 16.

Final answer

(a) 1.44×10−1 mol ATP1.44 \times 10^{-1}\,\text{mol ATP}, (b) 9.00×10−3 mol ATP9.00 \times 10^{-3}\,\text{mol ATP}, (c) 16:116:1 (or 1616)

NEXT STEPS
Final Takeaways from Your Teacher
  • Review word problem phrasing involving ratios to ensure the first quantity named is assigned to the numerator.

  • Perform a quick qualitative sanity check on the magnitude of your ratio (aerobic yield must exceed anaerobic yield).

OverviewACEpath Teacher's Diagnosis

03 The student mistakenly adds the 2 ATP from glycolysis to 32 ATP for aerobic respiration, double-counting glycolysis yield as 34 mol ATP/mol glucose.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    ATP\text{ATP}{aerobic\text{aerobic}} = 4.50×\times 10^{-3} mol\text{ mol} ×\times 34 mol ATP/mol\text{ mol ATP/mol}   ⟹  \implies ATP\text{ATP}{aerobic\text{aerobic}} = 0.153 mol\text{ mol}

    Correct

    ATP\text{ATP}{aerobic\text{aerobic}} = 4.50×\times 10^{-3} mol\text{ mol} ×\times 32 mol ATP/mol\text{ mol ATP/mol} = 1.44×\times 10^{-1} mol\text{ mol}

    You correctly set up the multiplication using the given quantity of glucose, but you used a value of 34 mol ATP/mol glucose34\text{ mol ATP/mol glucose} rather than the specified theoretical yield of 32 mol ATP/mol glucose32\text{ mol ATP/mol glucose}.

  2. Step 2

    ATP\text{ATP}{anaerobic\text{anaerobic}} = 4.50×\times 10^{-3} mol\text{ mol} ×\times 2 mol ATP/mol\text{ mol ATP/mol}   ⟹  \implies ATP\text{ATP}{anaerobic\text{anaerobic}} = 0.00900 mol\text{ mol}

  3. Step 3

    Ratio=342  ⟹  Ratio=17\text{Ratio} = \frac{34}{2} \implies \text{Ratio} = 17

    Correct

    Ratio\text{Ratio} = 322\frac{32}{2} = 16 (or \text{ (or }16:1)\text{)}

    Your division method is sound, but this step carries over the incorrect value of 34 mol ATP/mol glucose34\text{ mol ATP/mol glucose} from part (a).

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that total ATP production equals the moles of glucose multiplied by the molar yield.

You calculated the anaerobic ATP production accurately for part (b).

You correctly recognized that the ratio of ATP production can be found by dividing the respective molar yields directly.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Double-counting glycolysis in total aerobic yield

No, this was a conceptual error regarding whether glycolysis is already included in the total aerobic respiration yield.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You likely added the 2 mol ATP2\text{ mol ATP} from glycolysis onto the total aerobic maximum of 32 mol ATP32\text{ mol ATP}, double-counting glycolysis. In cellular respiration, the stated total aerobic yield of 30 to 32 mol ATP30\text{ to }32\text{ mol ATP} already includes the net 2 mol ATP2\text{ mol ATP} produced during glycolysis alongside the ATP generated by the citric acid cycle and oxidative phosphorylation.

REASONING PATH
Your ACEpath teacher’s suggested approach
Aerobic Total Respiration Yield
  • The standard theoretical yield for complete aerobic respiration (30 to 32 mol ATP/mol glucose30\text{ to }32\text{ mol ATP/mol glucose}) represents the total sum of all stages: glycolysis, pyruvate oxidation, the citric acid cycle, and oxidative phosphorylation.

  • Do not add glycolysis ATP as an extra term to the overall aerobic yield unless a problem explicitly provides only the mitochondrial yield.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. ATP\text{ATP}{aerobic\text{aerobic}} = (4.50×\times 10^{-3} mol glucose\text{ mol glucose}) ⋅\cdot (32 mol ATP/mol glucose\text{ mol ATP/mol glucose}) = 1.44×\times 10^{-1} mol ATP\text{ mol ATP}

  2. Ratio\text{Ratio} = 32 mol ATP2 mol ATP\frac{32\text{ mol ATP}}{2\text{ mol ATP}} = 16

Final answer

(a) 1.44×10−1 mol ATP1.44\times 10^{-1}\text{ mol ATP}, (b) 9.00×10−3 mol ATP9.00\times 10^{-3}\text{ mol ATP}, (c) 16:116:1 (or 1616)

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the breakdown of ATP generation across all four stages of cellular respiration to ensure total counts are not added twice.

  • Reread problem statements carefully to check whether a given yield refers to total respiration or to a specific stage.

Lock it in

Similar question

01

A mammalian muscle tissue metabolizes 2.00×10−3 mol2.00 \times 10^{-3}\text{ mol} of glucose. Under aerobic conditions yielding 30 mol ATP/mol glucose30\text{ mol ATP/mol glucose}, and under lactic acid fermentation yielding 2 mol ATP/mol glucose2\text{ mol ATP/mol glucose}, calculate the moles of ATP produced under each condition and the ratio of aerobic to anaerobic ATP yield.

Answer

Aerobic ATP: (2.00×10−3 mol)×30 mol ATP/mol=6.00×10−2 mol ATP(2.00 \times 10^{-3}\text{ mol}) \times 30\text{ mol ATP/mol} = 6.00 \times 10^{-2}\text{ mol ATP}. Anaerobic ATP: (2.00×10−3 mol)×2 mol ATP/mol=4.00×10−3 mol ATP(2.00 \times 10^{-3}\text{ mol}) \times 2\text{ mol ATP/mol} = 4.00 \times 10^{-3}\text{ mol ATP}. Ratio: 302=15:1\frac{30}{2} = 15:1 (or 1515).

02

A culture of S.cerevisiaeS. cerevisiae consumes glucose at a rate of 1.50×10−4 mol/min1.50 \times 10^{-4}\text{ mol/min}. If the culture switches from strictly anaerobic fermentation (2 mol ATP/mol glucose2\text{ mol ATP/mol glucose}) to fully aerobic respiration (32 mol ATP/mol glucose32\text{ mol ATP/mol glucose}), calculate: (a) the rate of ATP generation under each condition in mol ATP/min\text{mol ATP/min}, and (b) how many times faster ATP is produced aerobically at the same glucose consumption rate.

Answer

(a) Anaerobic rate: (1.50×10−4 mol/min)×2=3.00×10−4 mol ATP/min(1.50 \times 10^{-4}\text{ mol/min}) \times 2 = 3.00 \times 10^{-4}\text{ mol ATP/min}. Aerobic rate: (1.50×10−4 mol/min)×32=4.80×10−3 mol ATP/min(1.50 \times 10^{-4}\text{ mol/min}) \times 32 = 4.80 \times 10^{-3}\text{ mol ATP/min}. (b) Ratio: 4.80×10−33.00×10−4=16\frac{4.80 \times 10^{-3}}{3.00 \times 10^{-4}} = 16 times faster.

03

To maintain a constant cellular energy supply, a facultative anaerobe requires 9.60×10−2 mol ATP9.60 \times 10^{-2}\text{ mol ATP} per hour. Calculate the moles of glucose the cell must consume per hour under: (a) aerobic respiration yielding 32 mol ATP/mol glucose32\text{ mol ATP/mol glucose}, and (b) anaerobic fermentation yielding 2 mol ATP/mol glucose2\text{ mol ATP/mol glucose}. (c) By what factor must glucose consumption increase when shifting from aerobic to anaerobic conditions (the Pasteur effect)?

Answer

(a) Aerobic glucose: 9.60×10−2 mol ATP32 mol ATP/mol glucose=3.00×10−3 mol glucose/h\frac{9.60 \times 10^{-2}\text{ mol ATP}}{32\text{ mol ATP/mol glucose}} = 3.00 \times 10^{-3}\text{ mol glucose/h}. (b) Anaerobic glucose: 9.60×10−2 mol ATP2 mol ATP/mol glucose=4.80×10−2 mol glucose/h\frac{9.60 \times 10^{-2}\text{ mol ATP}}{2\text{ mol ATP/mol glucose}} = 4.80 \times 10^{-2}\text{ mol glucose/h}. (c) Increase factor: 4.80×10−23.00×10−3=16\frac{4.80 \times 10^{-2}}{3.00 \times 10^{-3}} = 16 (glucose consumption must increase 16-fold).

Loading workspace…