Resources

In a quantitative cell kinetics assay of a synchronous HeLa cell culture, cells spend an average total mitotic duration of M=60.0 minM = 60.0\ \text{min}. Fluorescence microscopy shows that anaphase poleward motion proceeds at a uniform velocity of v=1.20 μm/minv = 1.20\ \mu\text{m/min} over a distance of d=7.20 μmd = 7.20\ \mu\text{m} from the metaphase plate to each pole. (a) Calculate the duration of anaphase in minutes. (b) Convert this anaphase duration to seconds (ss) and express it as a percentage of the total mitotic duration (MM). (c) Contrast this stage's duration with prophase, which accounts for 45.0%45.0\% of MM (27.0 min27.0\ \text{min}), explaining the functional biological rationale for this significant difference in scale.

Answer and steps

Final answer

(a) Anaphase duration: t=dv=7.20 μm1.20 μm/min=6.00 mint = \frac{d}{v} = \frac{7.20\ \mu\text{m}}{1.20\ \mu\text{m/min}} = 6.00\ \text{min}; (b) 360 s360\ \text{s}, representing 6.00 min60.0 min×100%=10.0%\frac{6.00\ \text{min}}{60.0\ \text{min}} \times 100\% = 10.0\% of total mitotic duration; (c) Prophase requires extensive time (27.0 min27.0\ \text{min}) for complex chromatin condensation, centrosome migration, and spindle assembly, whereas anaphase is a rapid mechanical transit (6.00 min6.00\ \text{min}) tightly triggered by proteolysis to minimize the risk of chromosome lagging or aneuploidy.

Steps

Part (a): Calculating Anaphase Duration

Because poleward chromosome motion occurs at a constant velocity, the time taken for anaphase can be calculated using the kinematic relationship between distance, speed, and time:

t=dvt = \frac{d}{v}

Substitute the given values into the formula:

t=7.20 μm1.20 μm/min=6.00 mint = \frac{7.20\ \mu\text{m}}{1.20\ \mu\text{m/min}} = 6.00\ \text{min}

Thus, the duration of anaphase is 6.00 min6.00\ \text{min}.


Part (b): Converting to Seconds and Determining Mitotic Percentage

  1. Conversion to seconds:
    Multiply the duration in minutes by the conversion factor 60 s/min60\ \text{s/min}:

    t=6.00 min×60 s/min=360 st = 6.00\ \text{min} \times 60\ \text{s/min} = 360\ \text{s}

  2. Fraction of total mitotic duration (MM):
    Express this time as a percentage of the total mitotic period (M=60.0 minM = 60.0\ \text{min}):

    Percentage=(6.00 min60.0 min)×100%=10.0%\text{Percentage} = \left(\frac{6.00\ \text{min}}{60.0\ \text{min}}\right) \times 100\% = 10.0\%

Anaphase lasts 360 s360\ \text{s} and constitutes 10.0%10.0\% of the entire mitotic phase.


Part (c): Biological Rationale for the Duration Difference Between Prophase and Anaphase

  • Prophase (27.0 min27.0\ \text{min}, 45.0%45.0\% of MM):
    Prophase involves multiple complex, energy-intensive, and large-scale reorganizations of cellular architecture:

    • Decondensed interphase chromatin must be systematically packaged into highly condensed, transportable sister chromatids with the aid of condensin complexes.
    • Replicated centrosomes must separate and migrate to opposite poles of the cell, orchestrating the nucleation and stabilization of the dynamic mitotic spindle.
    • Disassembly of the nuclear lamina and fragmentation of the nuclear envelope must be carefully coordinated to prepare chromosomes for kinetochore attachment.
  • Anaphase (6.00 min6.00\ \text{min}, 10.0%10.0\% of MM):
    Anaphase is an all-or-none, irreversible switch. Once the spindle assembly checkpoint (SAC) is satisfied, the anaphase-promoting complex/cyclosome (APC/C\text{APC/C}) triggers the rapid destruction of securin, liberating separase to cleave the cohesin rings holding sister chromatids together.

    • Following this biochemical trigger, chromosome movement relies primarily on rapid mechanical pulling via kinetochore microtubule depolymerization (Anaphase A) and polar microtubule sliding with spindle pole separation (Anaphase B).
    • Biological advantage: Keeping anaphase brief minimizes the window during which vulnerable, unanchored chromatids move across the cytosol, thereby preventing chromosome lagging, entanglements, and nondisjunction that lead to aneuploidy.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student doubles the distance by assuming chromatids travel to both poles or the total separation between poles must be traversed, resulting in an anaphase duration of 12.0 min.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Total distance to both poles=2×7.20 μm=14.4 μm  ⟹  t=14.4 μm1.20 μm/min=12.0 min\text{Total distance to both poles} = 2 \times 7.20\ \mu\text{m} = 14.4\ \mu\text{m} \implies t = \frac{14.4\ \mu\text{m}}{1.20\ \mu\text{m/min}} = 12.0\ \text{min}

    Correct

    t=dv=7.20 μm1.20 μm/min=6.00 mint = \frac{d}{v} = \frac{7.20\ \mu\text{m}}{1.20\ \mu\text{m/min}} = 6.00\ \text{min}

    You doubled the distance to 14.4 μm14.4\ \mu\text{m} for both poles. However, sister chromatids segregate and move toward opposite spindle poles concurrently (in parallel), not one after the other. Therefore, the elapsed duration of anaphase is simply the time it takes one set of chromatids to traverse the 7.20 μm7.20\ \mu\text{m} distance to its pole.

  2. Step 2

    t=12.0 min×60 s/min=720 s  ⟹  Percentage=(12.0 min60.0 min)×100%=20.0%t = 12.0\ \text{min} \times 60\ \text{s/min} = 720\ \text{s} \implies \text{Percentage} = \left(\frac{12.0\ \text{min}}{60.0\ \text{min}}\right) \times 100\% = 20.0\%

    Correct

    t=6.00 min×60 s/min=360 s  ⟹  Percentage=(6.00 min60.0 min)×100%=10.0%t = 6.00\ \text{min} \times 60\ \text{s/min} = 360\ \text{s} \implies \text{Percentage} = \left(\frac{6.00\ \text{min}}{60.0\ \text{min}}\right) \times 100\% = 10.0\%

    Your conversion method and percentage formula were applied correctly, but the numerical values were inflated because they inherited the doubled duration (12.0 min12.0\ \text{min}) from Step 1.

  3. Step 3

    Anaphase (12.0 min,20.0%) is shorter than prophase (27.0 min,45.0%). Prophase takes longer because it involves chromatin condensation and spindle assembly while anaphase is just moving chromosomes.\text{Anaphase (}12.0\ \text{min}, 20.0\%\text{) is shorter than prophase (}27.0\ \text{min}, 45.0\%\text{). Prophase takes longer because it involves chromatin condensation and spindle assembly while anaphase is just moving chromosomes.}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recalled and applied the kinematic relationship between distance, velocity, and time.

You executed the unit conversion from minutes to seconds and the percentage calculation with accurate arithmetic.

You identified the major structural processes that make prophase time-consuming.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Simultaneous vs. Sequential Distance Doubling

You summed the travel distances to both spindle poles (7.20 μm×27.20\ \mu\text{m} \times 2) as if the chromosomes moved sequentially rather than simultaneously.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Treating parallel geometric processes as serial additions. In mitosis, chromatid sets move toward opposite poles concurrently at the same velocity, so total stage duration depends on the single-path transit time, not the sum of distances to both poles.

REASONING PATH
Your ACEpath teacher’s suggested approach
Parallel vs. Serial Transit
  • When two objects move simultaneously toward different destinations at speed vv, the elapsed time is t=dsinglevt = \frac{d_{\text{single}}}{v}, not d1+d2v\frac{d_1 + d_2}{v}.

  • Check whether movements happen in parallel before combining their travel distances.

Biological Significance of Anaphase Speed
  • Anaphase must be rapid to minimize the critical time window in which unanchored chromatids can lag, tangle, or cause aneuploidy.

  • Always pair mechanical descriptions of chromosome movement with the evolutionary need to preserve genomic fidelity.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Recognize that chromatid movement toward both poles occurs at the same time: d=7.20 μmd = 7.20\ \mu\text{m}.

  2. Compute anaphase duration: t=7.20 μm1.20 μm/min=6.00 mint = \frac{7.20\ \mu\text{m}}{1.20\ \mu\text{m/min}} = 6.00\ \text{min}.

  3. Convert to seconds: t=6.00 min×60 s/min=360 st = 6.00\ \text{min} \times 60\ \text{s/min} = 360\ \text{s}.

  4. Calculate percentage of total mitosis: 6.00 min60.0 min×100%=10.0%\frac{6.00\ \text{min}}{60.0\ \text{min}} \times 100\% = 10.0\%.

Final answer

(a) 6.00 min6.00\ \text{min}; (b) 360 s360\ \text{s}, 10.0%10.0\%; (c) Prophase requires extensive architectural remodeling (27.0 min27.0\ \text{min}), whereas anaphase is a rapid mechanical segregation (6.00 min6.00\ \text{min}) to prevent lagging chromosomes and aneuploidy.

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice identifying whether biological transport or kinematic events occur concurrently or consecutively.

  • Review the molecular triggers of anaphase (APC/C and separase-mediated cohesin cleavage) and why rapid transit prevents nondisjunction.

OverviewACEpath Teacher's Diagnosis

02 The student miscalculates the percentage by dividing by 100 instead of the total mitotic duration of 60.0 min, yielding 6.00%.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    t=7.20 μm1.20 μm/min=6.00 mint = \frac{7.20\ \mu\text{m}}{1.20\ \mu\text{m/min}} = 6.00\ \text{min}

  2. Step 2

    t=6.00 min×60 s/min=360 st = 6.00\ \text{min} \times 60\ \text{s/min} = 360\ \text{s}

  3. Step 3

    Percentage=(6.00100)×100%=6.00%\text{Percentage} = \left(\frac{6.00}{100}\right) \times 100\% = 6.00\%

    Correct

    Percentage=(6.00 min60.0 min)×100%=10.0%\text{Percentage} = \left(\frac{6.00\ \text{min}}{60.0\ \text{min}}\right) \times 100\% = 10.0\%

    To find what percentage of the total mitotic phase (MM) anaphase represents, you need to divide the anaphase duration by the total mitotic time (M=60.0 minM = 60.0\ \text{min}), not by 100100.

  4. Step 4

    Anaphase at 6.00%6.00\% is significantly shorter than prophase at 45.0%45.0\%. Prophase requires significant time for chromatin condensation and nuclear envelope breakdown, whereas anaphase is a rapid mechanical movement.

    Correct

    Anaphase at 10.0%10.0\% (6.00 min6.00\ \text{min}) is significantly shorter than prophase at 45.0%45.0\% (27.0 min27.0\ \text{min}). Prophase requires substantial time for chromatin condensation, centrosome migration, and spindle assembly, whereas anaphase is a rapid mechanical transit triggered irreversibly by proteolysis to prevent aneuploidy.

    Your biological explanation accurately contrasts the extensive preparation required in prophase with the rapid transit of anaphase, but the numerical percentage cited is carried forward from your error in part (b).

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the uniform velocity formula to find an anaphase duration of 6.00 min6.00\ \text{min}.

You converted minutes to seconds accurately to obtain 360 s360\ \text{s}.

You clearly explained the functional biological differences between prophase preparations and rapid anaphase chromosome separation.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Incorrect percentage base denominator

You divided by 100100 rather than dividing by the total mitotic duration M=60.0 minM = 60.0\ \text{min}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the scaling factor in a percentage calculation (multiplying by 100%100\%) with the base denominator (which must be the total quantity, M=60.0 minM = 60.0\ \text{min}).

REASONING PATH
Your ACEpath teacher’s suggested approach
Identifying the Base for a Percentage
  • Percentage=partwhole×100%\text{Percentage} = \frac{\text{part}}{\text{whole}} \times 100\%

  • Always substitute the actual total value given in the problem as the denominator before multiplying by 100%100\%.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the total mitotic duration given in the problem: M=60.0 minM = 60.0\ \text{min}.

  2. Set up the fraction with anaphase duration (6.00 min6.00\ \text{min}) in the numerator and total duration (60.0 min60.0\ \text{min}) in the denominator.

  3. Calculate: 6.00 min60.0 min×100%=0.100×100%=10.0%\frac{6.00\ \text{min}}{60.0\ \text{min}} \times 100\% = 0.100 \times 100\% = 10.0\%.

Final answer

(a) 6.00 min6.00\ \text{min}; (b) 360 s360\ \text{s}, which is 10.0%10.0\% of total mitotic duration; (c) Prophase requires 27.0 min27.0\ \text{min} (45.0%45.0\%) for chromatin condensation, spindle assembly, and nuclear breakdown, whereas anaphase is a rapid 6.00 min6.00\ \text{min} (10.0%10.0\%) transit to minimize chromosome segregation errors.

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the formula for expressing a measured phase as a fraction of total cycle time.

  • Practice checking whether the denominator in percentage setups matches the specified total.

OverviewACEpath Teacher's Diagnosis

03 The student reverses the kinematic relationship by multiplying velocity by distance instead of dividing, obtaining an incorrect duration of 8.64 min.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    t=v×d=1.20 μm/min×7.20 μm=8.64 mint = v \times d = 1.20\ \mu\text{m/min} \times 7.20\ \mu\text{m} = 8.64\ \text{min}

    Correct

    t=dv=7.20 μm1.20 μm/min=6.00 mint = \frac{d}{v} = \frac{7.20\ \mu\text{m}}{1.20\ \mu\text{m/min}} = 6.00\ \text{min}

    You inverted the kinematic formula by multiplying velocity by distance. Duration equals distance divided by velocity: t=dvt = \frac{d}{v}.

  2. Step 2

    t=8.64 min×60 s/min=518.4 s  ⟹  Percentage=(8.64 min60.0 min)×100%=14.4%t = 8.64\ \text{min} \times 60\ \text{s/min} = 518.4\ \text{s} \implies \text{Percentage} = \left(\frac{8.64\ \text{min}}{60.0\ \text{min}}\right) \times 100\% = 14.4\%

    Correct

    t=6.00 min×60 s/min=360 s  ⟹  Percentage=(6.00 min60.0 min)×100%=10.0%t = 6.00\ \text{min} \times 60\ \text{s/min} = 360\ \text{s} \implies \text{Percentage} = \left(\frac{6.00\ \text{min}}{60.0\ \text{min}}\right) \times 100\% = 10.0\%

    Your conversion procedure and percentage calculation were completely correct, but your numbers inherited the error from part (a).

  3. Step 3

    Anaphase (8.64 min8.64\ \text{min}, 14.4%14.4\%) is much shorter than prophase (27.0 min27.0\ \text{min}, 45.0%45.0\%). Prophase involves complex cellular reorganization like chromosome condensation and spindle formation, whereas anaphase is solely the rapid segregation of chromosomes.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly multiplied by 60 s/min60\ \text{s/min} to convert minutes into seconds.

You set up the correct ratio to calculate the percentage of total mitotic duration.

You accurately explained the cellular events that make prophase significantly longer than anaphase.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Kinematic Formula Inversion

You wrote t=v×dt = v \times d rather than t=dvt = \frac{d}{v}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused the product and quotient forms of the uniform motion formula (d=v⋅td = v \cdot t). When solving for time, you must isolate tt by dividing distance by velocity, which also ensures the units cancel to minutes (μmμm/min=min\frac{\mu\text{m}}{\mu\text{m/min}} = \text{min}).

REASONING PATH
Your ACEpath teacher’s suggested approach
Dimensional Verification
  • Multiplying velocity by distance produces μm2min\frac{\mu\text{m}^2}{\text{min}}, which is not a unit of time.

  • Always check that your units cancel out: μmμm/min=μm×minμm=min\frac{\mu\text{m}}{\mu\text{m/min}} = \mu\text{m} \times \frac{\text{min}}{\mu\text{m}} = \text{min}.

Isolating Time in Uniform Motion
  • d=v×t  ⟹  t=dvd = v \times t \implies t = \frac{d}{v}.

  • Rearrange the base kinematic relation before substituting numbers.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Divide distance by velocity: t=7.20 μm1.20 μm/min=6.00 mint = \frac{7.20\ \mu\text{m}}{1.20\ \mu\text{m/min}} = 6.00\ \text{min}.

  2. Convert to seconds: t=6.00 min×60 s/min=360 st = 6.00\ \text{min} \times 60\ \text{s/min} = 360\ \text{s}.

  3. Find the percentage of total mitosis: 6.00 min60.0 min×100%=10.0%\frac{6.00\ \text{min}}{60.0\ \text{min}} \times 100\% = 10.0\%.

Final answer

(a) 6.00 min6.00\ \text{min}; (b) 360 s360\ \text{s}, which is 10.0%10.0\% of MM; (c) Prophase requires extensive time (27.0 min27.0\ \text{min}) for chromatin condensation and spindle assembly, while anaphase is a rapid mechanical transit (6.00 min6.00\ \text{min}) to minimize nondisjunction risks.

NEXT STEPS
Final Takeaways from Your Teacher
  • Use dimensional analysis as a quick sanity check whenever you calculate time from rates and distances.

  • Review the basic kinematic triangle (d=v⋅td = v \cdot t) before plugging values into equations.

  • Practice calculating sub-phase durations from microscopic translocation velocities.

Lock it in

Similar question

01

In a mammalian epithelial cell culture with a mitotic duration of M=80.0 minM = 80.0\ \text{min}, anaphase chromosomes move at 1.50 μm/min1.50\ \mu\text{m/min} over a distance of 6.00 μm6.00\ \mu\text{m} from the metaphase plate to each spindle pole. Calculate the duration of anaphase in minutes and determine what percentage of total mitosis it occupies.

Answer

Anaphase duration: t=6.00 μm1.50 μm/min=4.00 mint = \frac{6.00\ \mu\text{m}}{1.50\ \mu\text{m/min}} = 4.00\ \text{min}. Percentage of mitosis: 4.00 min80.0 min×100%=5.00%\frac{4.00\ \text{min}}{80.0\ \text{min}} \times 100\% = 5.00\%.

02

During anaphase B, the distance between the two spindle poles increases from 12.0 μm12.0\ \mu\text{m} to 20.0 μm20.0\ \mu\text{m} as polar microtubules slide apart at a relative rate of 1.60 μm/min1.60\ \mu\text{m/min}. If Anaphase A (kinetochore-to-pole shortening) and Anaphase B occur concurrently over the same time window, calculate the duration of this phase in seconds.

Answer

Total pole separation increase: Δd=20.0 μm−12.0 μm=8.00 μm\Delta d = 20.0\ \mu\text{m} - 12.0\ \mu\text{m} = 8.00\ \mu\text{m}. Since the relative separation velocity is given as 1.60 μm/min1.60\ \mu\text{m/min}, duration t=8.00 μm1.60 μm/min=5.00 min=300 st = \frac{8.00\ \mu\text{m}}{1.60\ \mu\text{m/min}} = 5.00\ \text{min} = 300\ \text{s}.

03

A mitotic inhibitor slows anaphase poleward velocity by 50%50\%, extending anaphase from 5.0 min5.0\ \text{min} to 10.0 min10.0\ \text{min}. Explain two distinct biological hazards that this prolonged anaphase duration poses to the resulting daughter cells.

Answer
  1. Increased incidence of lagging chromosomes and non-disjunction, resulting in aneuploidy or micronuclei formation. 2. Premature cleavage furrow ingression or spindle collapse before complete genomic segregation, causing chromosome cutting or asymmetrical karyotypes.
Loading workspace…