Resources

A plant parenchyma cell with an initial protoplast volume of V0=4.0×104 μm3V_0 = 4.0 \times 10^4\,\mu\mathrm{m}^3 is placed into a hypertonic sucrose solution. Water leaves the vacuole until the protoplast pulls completely away from the rigid cell wall, a state known as incipient plasmolysis, reducing the protoplast volume to Vf=2.8×104 μm3V_f = 2.8 \times 10^4\,\mu\mathrm{m}^3. In contrast, an animal erythrocyte suspended in the same hypertonic solution shrinks continuously without arresting at a fixed external boundary. Calculate the percentage reduction in protoplast volume of the plant cell, and state the specific structural component of the plant cell that prevents further collapse of its outer boundary, which is entirely absent in the erythrocyte.

Answer and steps

Final answer

The percentage reduction in protoplast volume is 30.0%30.0\%; the structural component preventing collapse of the cell's outer perimeter is the rigid cellulose cell wall.

Steps

01

Calculate the reduction in protoplast volume

The initial volume of the protoplast before water loss is: V0=4.0×104 \mum3V_0 = 4.0 \times 10^4\text{ \mu m}^3

The final volume after water moves out down its water potential gradient via osmosis is: Vf=2.8×104 \mum3V_f = 2.8 \times 10^4\text{ \mu m}^3

The absolute change in volume (ΔV\Delta V) is: ΔV=V0−Vf=4.0×104 \mum3−2.8×104 \mum3=1.2×104 \mum3\Delta V = V_0 - V_f = 4.0 \times 10^4\text{ \mu m}^3 - 2.8 \times 10^4\text{ \mu m}^3 = 1.2 \times 10^4\text{ \mu m}^3


02

Determine the percentage reduction

The percentage reduction is calculated relative to the initial volume (V0V_0): Percentage reduction=(ΔVV0)×100%\text{Percentage reduction} = \left(\frac{\Delta V}{V_0}\right) \times 100\%

Substitute the values: Percentage reduction=(1.2×104 \mum34.0×104 \mum3)×100%=0.30×100%=30.0%\text{Percentage reduction} = \left(\frac{1.2 \times 10^4\text{ \mu m}^3}{4.0 \times 10^4\text{ \mu m}^3}\right) \times 100\% = 0.30 \times 100\% = 30.0\%

Common Pitfall: Be sure to divide by the initial volume (4.0×104 \mum34.0 \times 10^4\text{ \mu m}^3), not the final shrunken volume (2.8×104 \mum32.8 \times 10^4\text{ \mu m}^3).


03

Identify the structural component absent in erythrocytes

  • In plant cells, the protoplast (the plasma membrane and cytoplasm inside) is encased by a rigid, non-living outer layer composed primarily of cellulose: the cell wall.
  • When water leaves the central vacuole in a hypertonic environment, the plasma membrane pulls away from the wall (plasmolysis), but the outer cellulose cell wall retains its mechanical strength and shape, preventing the entire perimeter of the cell from collapsing inward.
  • Animal cells, such as erythrocytes (red blood cells), lack a cell wall and are bounded only by a flexible phospholipid bilayer membrane. Consequently, water loss causes the entire cell to shrink and wrinkle irregularly (crenation) without maintaining an external boundary.

Therefore, the structural component responsible for maintaining the fixed outer boundary is the rigid cellulose cell wall.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student divides the change in volume by the final volume instead of the initial volume when calculating percentage reduction, obtaining approximately 43%.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    ΔV=4.0×104−2.8×104=1.2×104 \mum3\Delta V = 4.0 \times 10^4 - 2.8 \times 10^4 = 1.2 \times 10^4\text{ \mu m}^3

  2. Step 2

    Percentage reduction=(1.2×1042.8×104)×100%=42.9%\text{Percentage reduction} = \left(\frac{1.2 \times 10^4}{2.8 \times 10^4}\right) \times 100\% = 42.9\%

    Correct

    Percentage reduction=(ΔVV0)×100%=(1.2×104 \mum34.0×104 \mum3)×100%=30.0%\text{Percentage reduction} = \left(\frac{\Delta V}{V_0}\right) \times 100\% = \left(\frac{1.2 \times 10^4\text{ \mu m}^3}{4.0 \times 10^4\text{ \mu m}^3}\right) \times 100\% = 30.0\%

    You used the final shrunken volume (2.8×104 \mum32.8 \times 10^4\text{ \mu m}^3) as the denominator instead of the starting initial volume (4.0×104 \mum34.0 \times 10^4\text{ \mu m}^3).

  3. Step 3

    Cell wall\text{Cell wall}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly subtracted the final volume from the initial volume to find the absolute loss in volume.

You correctly identified the cell wall as the protective external feature absent in erythrocytes.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Wrong base value in percentage change

You divided by the final volume VfV_f rather than the baseline volume V0V_0.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Whenever you calculate percentage change (increase or reduction), the reference base in the denominator must always be the original or initial value (V0V_0), not the final value (VfV_f).

REASONING PATH
Your ACEpath teacher’s suggested approach
Identify the Baseline Value
  • Percentage Change=∣ΔV∣Initial Value×100%\text{Percentage Change} = \frac{|\Delta V|}{\text{Initial Value}} \times 100\%

  • Always place the starting quantity (V0V_0) in the denominator before evaluating the fraction.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Percentage reduction=(ΔVV0)×100%=(1.2×104 \mum34.0×104 \mum3)×100%\text{Percentage reduction} = \left(\frac{\Delta V}{V_0}\right) \times 100\% = \left(\frac{1.2 \times 10^4\text{ \mu m}^3}{4.0 \times 10^4\text{ \mu m}^3}\right) \times 100\%

  2. Percentage reduction=0.30×100%=30.0%\text{Percentage reduction} = 0.30 \times 100\% = 30.0\%

Final answer

30.0%30.0\% reduction in protoplast volume; rigid cellulose cell wall

NEXT STEPS
Final Takeaways from Your Teacher
  • Double-check your denominator in any percentage reduction or increase problem to ensure it is the initial baseline value.

  • Practice setting up the ratio formula symbolically as ΔVV0\frac{\Delta V}{V_0} before plugging in numerical values.

OverviewACEpath Teacher's Diagnosis

02 The student calculates the remaining volume percentage relative to the initial volume rather than the reduction in volume, concluding it is 70%.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Percentage reduction=VfV0×100%=2.8×1044.0×104×100%=70%\text{Percentage reduction} = \frac{V_f}{V_0} \times 100\% = \frac{2.8 \times 10^4}{4.0 \times 10^4} \times 100\% = 70\%

    Correct

    Percentage reduction=V0−VfV0×100%=4.0×104−2.8×1044.0×104×100%=30.0%\text{Percentage reduction} = \frac{V_0 - V_f}{V_0} \times 100\% = \frac{4.0 \times 10^4 - 2.8 \times 10^4}{4.0 \times 10^4} \times 100\% = 30.0\%

    You calculated the final volume as a fraction of the initial volume, which represents the remaining protoplast volume rather than the amount by which it was reduced.

  2. Step 2

    Cell wall\text{Cell wall}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the cell wall as the structural component that prevents outer collapse in plant cells.

You correctly substituted the given numerical values into your calculation and evaluated the arithmetic accurately.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Remaining Quantity vs. Percentage Reduction Confusion

You set up the ratio of final volume to initial volume rather than the change in volume relative to the initial volume.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the proportion of an entity that remains (Vf/V0V_f / V_0) with the relative decrease or percentage reduction (ΔV/V0=(V0−Vf)/V0\Delta V / V_0 = (V_0 - V_f) / V_0).

REASONING PATH
Your ACEpath teacher’s suggested approach
Define Percentage Reduction
  • Percentage reduction=Initial−FinalInitial×100%=100%−(VfV0×100%)\text{Percentage reduction} = \frac{\text{Initial} - \text{Final}}{\text{Initial}} \times 100\% = 100\% - \left(\frac{V_f}{V_0} \times 100\%\right)

  • Always find the difference (ΔV=V0−Vf\Delta V = V_0 - V_f) first, or subtract your remaining percentage from 100%100\%.

Sanity Check the Result
  • If a volume drops from 4.04.0 to 2.82.8, more than half the volume is still present, so the reduction must be significantly less than 50%50\%.

  • Check whether your calculated percentage represents what was lost or what was kept.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Find the absolute volume lost: ΔV=V0−Vf=4.0×104 \mum3−2.8×104 \mum3=1.2×104 \mum3\Delta V = V_0 - V_f = 4.0 \times 10^4\text{ \mu m}^3 - 2.8 \times 10^4\text{ \mu m}^3 = 1.2 \times 10^4\text{ \mu m}^3.

  2. Calculate percentage reduction: ΔVV0×100%=1.2×1044.0×104×100%=30.0%\frac{\Delta V}{V_0} \times 100\% = \frac{1.2 \times 10^4}{4.0 \times 10^4} \times 100\% = 30.0\%.

Final answer

The percentage reduction in protoplast volume is 30.0%30.0\%, and the structural component is the cell wall.

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice identifying whether a question asks for the remaining value or the change/reduction.

  • When calculating percentage decrease, remember to place the difference (initial−final)(\text{initial} - \text{final}) in the numerator.

OverviewACEpath Teacher's Diagnosis

03 The student confuses the rigid extracellular cell wall with the internal boundary membrane of the central vacuole, naming the tonoplast instead.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    ΔV=4.0×104−2.8×104=1.2×104 \mum3  ⟹  Percentage reduction=(1.2×1044.0×104)×100%=30%\Delta V = 4.0 \times 10^4 - 2.8 \times 10^4 = 1.2 \times 10^4\text{ \mu m}^3 \implies \text{Percentage reduction} = \left(\frac{1.2 \times 10^4}{4.0 \times 10^4}\right) \times 100\% = 30\%

  2. Step 2

    Tonoplast\text{Tonoplast}

    Correct

    Cell wall (or cellulose cell wall)\text{Cell wall (or cellulose cell wall)}

    You named the tonoplast (the vacuolar membrane), which is an internal boundary located inside the protoplast that shrinks inward as water leaves the central vacuole. The external rigid structure that resists collapse and maintains the cell's outer boundary is the extracellular cellulose cell wall.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the volume change ΔV=1.2×104 \mum3\Delta V = 1.2 \times 10^4\text{ \mu m}^3.

You used the correct initial volume as the denominator to obtain 30%30\%.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Organelle identification error

none

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused the inner vacuolar membrane (the tonoplast) with the external structural layer (the cell wall), overlooking that the tonoplast shrinks along with the retreating protoplast during plasmolysis rather than providing rigid outer boundary support.

REASONING PATH
Your ACEpath teacher’s suggested approach
Distinguish Inner Membranes from Outer Walls
  • The tonoplast is the semipermeable membrane enclosing the central vacuole inside the cytoplasm, whereas the cell wall is an extracellular, rigid matrix composed of cellulose fibrils that surrounds the entire protoplast.

  • When asked for the structure providing rigid external mechanical support against osmotic collapse, identify the extracellular cell wall rather than internal organelle membranes.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Recognize that as water exits the vacuole, the tonoplast and plasma membrane pull inward together as part of the shrinking protoplast.

  2. Identify the outer non-living layer that remains in place to define the cell perimeter: the cellulose cell wall.

Final answer

The percentage reduction in protoplast volume is 30.0%30.0\%, and the structural component preventing collapse of the cell's outer boundary is the rigid cellulose cell wall.

NEXT STEPS
Final Takeaways from Your Teacher
  • Review labeled diagrams of plasmolysis to clearly trace the relative positions of the cell wall, plasma membrane, and tonoplast.

  • Practice distinguishing plant-specific structures by their cellular location (extracellular matrix vs. endomembrane system).

Lock it in

Similar question

01

A plant cell with an initial protoplast volume of 5.0×104 \mum35.0 \times 10^4\text{ \mu m}^3 undergoes plasmolysis in a concentrated salt solution until its volume reaches 3.5×104 \mum33.5 \times 10^4\text{ \mu m}^3. Calculate the percentage reduction in protoplast volume.

Answer

30.0%30.0\%. First calculate the change in volume: ΔV=5.0×104−3.5×104=1.5×104 \mum3\Delta V = 5.0 \times 10^4 - 3.5 \times 10^4 = 1.5 \times 10^4\text{ \mu m}^3. Then divide by the initial volume: 1.5×1045.0×104×100%=30.0%\frac{1.5 \times 10^4}{5.0 \times 10^4} \times 100\% = 30.0\%.

02

An elodea leaf cell is placed in pure water, expanding its protoplast volume from 3.2×104 \mum33.2 \times 10^4\text{ \mu m}^3 until it becomes fully turgid at 4.0×104 \mum34.0 \times 10^4\text{ \mu m}^3. Why does the plant cell not burst, and what is the percentage increase in protoplast volume?

Answer

The rigid cellulose cell wall exerts wall pressure (turgor pressure) preventing lysis. The percentage increase is 25.0%25.0\%: ΔV=4.0×104−3.2×104=0.8×104 \mum3\Delta V = 4.0 \times 10^4 - 3.2 \times 10^4 = 0.8 \times 10^4\text{ \mu m}^3, and 0.8×1043.2×104×100%=25.0%\frac{0.8 \times 10^4}{3.2 \times 10^4} \times 100\% = 25.0\%.

03

Two identical plant protoplasts each have an initial volume of V0=6.0×104 \mum3V_0 = 6.0 \times 10^4\text{ \mu m}^3. Cell A is enzymatically stripped of its cell wall (forming a naked protoplast) and Cell B is left intact. Both are placed into a hypertonic solution until their protoplast volumes reach 4.2×104 \mum34.2 \times 10^4\text{ \mu m}^3. State the percentage volume reduction, and describe the difference in the external shape/perimeter of Cell A compared to Cell B.

Answer

The percentage reduction is 30.0%30.0\% (1.8×1046.0×104×100%\frac{1.8 \times 10^4}{6.0 \times 10^4} \times 100\%). Cell B retains its rectangular/fixed external shape because of the rigid cell wall while the protoplast shrinks away (plasmolysis); Cell A lacks a cell wall, so its entire outer perimeter shrinks and deforms continuously without maintaining a fixed external boundary.

Loading workspace…