Resources

In a cross-fostering behavioral study of stress reactivity in rats, pups born to low-licking/grooming (low-LG) dams were cross-fostered at birth to high-licking/grooming (high-LG) foster dams. Corticosterone secretion following restraint stress was quantified in adult offspring. Plasma corticosterone concentration in cross-fostered biological offspring of low-LG dams reared by high-LG dams was measured as 0.620 μg/mL0.620\,\mu\mathrm{g/mL}. In non-fostered controls reared by their biological low-LG mothers, the concentration was 1.480 μg/mL1.480\,\mu\mathrm{g/mL}. (1) Convert both plasma corticosterone concentrations to standard SI molar units ( μmol/L\,\mu\mathrm{mol/L}), given the molar mass of corticosterone is 346.46 g/mol346.46\text{ g/mol}. (2) Calculate the percentage reduction in plasma corticosterone concentration attributable to maternal cross-fostering. Round all answers to three significant figures.

Answer and steps

Final answer

(1) Non-fostered control: 4.27 μmol/L4.27\,\mu\mathrm{mol/L}; Cross-fostered: 1.79 μmol/L1.79\,\mu\mathrm{mol/L}; (2) 58.1%58.1\% reduction

Steps

Part 1: Unit Conversion to \mumol/L\text{\mu mol/L}

  1. Understand the unit relationships:

    • Corticosterone has a molar mass of M=346.46 g/molM = 346.46\text{ g/mol}, which is equivalent to 346.46 \mug/\mumol346.46\text{ \mu g/\mu mol}.
    • The given concentrations are in micrograms per milliliter (\mug/mL\text{\mu g/mL}). Converting volume from milliliters to liters: 1 mL=10−3 L  ⟹  1 \mug/mL=1000 \mug/L1\text{ mL} = 10^{-3}\text{ L} \implies 1\text{ \mu g/mL} = 1000\text{ \mu g/L}
    • The molar concentration in micromoles per liter (\mumol/L\text{\mu mol/L}) is therefore: Concentration (\mumol/L)=Concentration (\mug/mL)×1000 mL/L346.46 \mug/\mumol\text{Concentration } (\text{\mu mol/L}) = \frac{\text{Concentration } (\text{\mu g/mL}) \times 1000\text{ mL/L}}{346.46\text{ \mu g/\mu mol}}
  2. Calculate the concentration for the non-fostered control group:

    • Given mass concentration: C1=1.480 \mug/mL=1480 \mug/LC_1 = 1.480\text{ \mu g/mL} = 1480\text{ \mu g/L} Molar concentration=1480 \mug/L346.46 \mug/\mumol≈4.2718 \mumol/L\text{Molar concentration} = \frac{1480\text{ \mu g/L}}{346.46\text{ \mu g/\mu mol}} \approx 4.2718\text{ \mu mol/L}
    • Rounded to three significant figures: 4.27 \mumol/L4.27\text{ \mu mol/L}
  3. Calculate the concentration for the cross-fostered group:

    • Given mass concentration: C2=0.620 \mug/mL=620 \mug/LC_2 = 0.620\text{ \mu g/mL} = 620\text{ \mu g/L} Molar concentration=620 \mug/L346.46 \mug/\mumol≈1.7895 \mumol/L\text{Molar concentration} = \frac{620\text{ \mu g/L}}{346.46\text{ \mu g/\mu mol}} \approx 1.7895\text{ \mu mol/L}
    • Rounded to three significant figures: 1.79 \mumol/L1.79\text{ \mu mol/L}

Part 2: Percentage Reduction

  1. Formula for percentage reduction: Percentage reduction=Initial value−Final valueInitial value×100%\text{Percentage reduction} = \frac{\text{Initial value} - \text{Final value}}{\text{Initial value}} \times 100\%
  2. Compute using the given values: Percentage reduction=1.480 \mug/mL−0.620 \mug/mL1.480 \mug/mL×100%\text{Percentage reduction} = \frac{1.480\text{ \mu g/mL} - 0.620\text{ \mu g/mL}}{1.480\text{ \mu g/mL}} \times 100\% Percentage reduction=0.8601.480×100%≈58.108%\text{Percentage reduction} = \frac{0.860}{1.480} \times 100\% \approx 58.108\%
  3. Round to three significant figures:

    • The reduction is 58.1%58.1\%.

(Biological Insight: A cross-fostering experiment separates genetic inheritance from environmental rearing conditions. Because pups born to low-LG dams develop a markedly lower stress response (58.1%58.1\% lower corticosterone) when raised by high-LG dams, early maternal care strongly influences adult neuroendocrine stress reactivity through environmental/epigenetic mechanisms.)

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student misidentifies the baseline and divides the difference by the new cross-fostered value instead of the initial control value when calculating percentage reduction.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    1 \mug/mL=1000 \mug/L  ⟹  Cross-fostered=0.620×1000346.46=1.79 \mumol/L  ⟹  Control=1.480×1000346.46=4.27 \mumol/L1\text{ \mu g/mL} = 1000\text{ \mu g/L} \implies \text{Cross-fostered} = 0.620 \times \frac{1000}{346.46} = 1.79\text{ \mu mol/L} \implies \text{Control} = 1.480 \times \frac{1000}{346.46} = 4.27\text{ \mu mol/L}

  2. Step 2

    Reduction=1.480−0.620=0.860 \mug/mL\text{Reduction} = 1.480 - 0.620 = 0.860\text{ \mu g/mL}

  3. Step 3

    Percentage reduction=(0.8600.620)×100%=139%\text{Percentage reduction} = \left(\frac{0.860}{0.620}\right) \times 100\% = 139\%

    Correct

    Percentage reduction=(0.8601.480)×100%≈58.1%\text{Percentage reduction} = \left(\frac{0.860}{1.480}\right) \times 100\% \approx 58.1\%

    You placed the cross-fostered value in the denominator rather than the non-fostered control baseline. Percentage reduction must always be calculated relative to the original baseline: Control−Cross-fosteredControl×100%\frac{\text{Control} - \text{Cross-fostered}}{\text{Control}} \times 100\%.

WHAT YOU DID WELL
Compliments from Your Teacher

You accurately converted mass concentrations to molar concentrations using the correct dimensional analysis.

You correctly calculated the absolute decrease in plasma corticosterone concentration.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Incorrect baseline in percentage change

Dividing the difference by the final cross-fostered value (0.620 \mug/mL0.620\text{ \mu g/mL}) instead of the initial control value (1.480 \mug/mL1.480\text{ \mu g/mL}).

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the new, reduced measurement as the reference denominator instead of the untreated control baseline that represents the starting reference level.

REASONING PATH
Your ACEpath teacher’s suggested approach
Identify the Reference Baseline
  • In an experiment testing an intervention, the baseline is always the untreated or initial control condition.

  • Always set the denominator of a percentage reduction formula to the control or pre-intervention value.

Sanity Check for Reduction
  • A positive quantity decreasing to another positive quantity cannot have a reduction greater than 100%100\%.

  • If your calculated percentage reduction exceeds 100%100\%, check whether you accidentally inverted the ratio or placed the smaller final value in the denominator.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the non-fostered control level (1.480 \mug/mL1.480\text{ \mu g/mL}) as the baseline denominator.

  2. Divide the absolute reduction by the baseline: 0.860 \mug/mL1.480 \mug/mL≈0.58108\frac{0.860\text{ \mu g/mL}}{1.480\text{ \mu g/mL}} \approx 0.58108.

  3. Multiply by 100%100\% and round to three significant figures: 58.1%58.1\%.

Final answer

(1) Non-fostered control: 4.27 \mumol/L4.27\text{ \mu mol/L}; Cross-fostered: 1.79 \mumol/L1.79\text{ \mu mol/L}; (2) 58.1%58.1\% reduction

NEXT STEPS
Final Takeaways from Your Teacher
  • Write out the algebraic percentage change formula Initial−FinalInitial×100%\frac{\text{Initial} - \text{Final}}{\text{Initial}} \times 100\% before substituting values.

  • Verify that any reduction between two positive numbers stays between 0%0\% and 100%100\%.

OverviewACEpath Teacher's Diagnosis

02 The student forgets that 1 mL is 10⁻³ L and treats µg/mL as directly equivalent to µg/L, underestimating the molar concentration by a factor of 1000.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Cross-fostered=0.620346.46=0.00179 \mumol/L\text{Cross-fostered} = \frac{0.620}{346.46} = 0.00179\text{ \mu mol/L}

    Correct

    0.620 \mug/mL×1000 mL/L346.46 \mug/\mumol=1.79 \mumol/L\frac{0.620\text{ \mu g/mL} \times 1000\text{ mL/L}}{346.46\text{ \mu g/\mu mol}} = 1.79\text{ \mu mol/L}

    You divided mass concentration by molar mass without converting the volume from milliliters to liters. Since 1 mL=10−3 L1\text{ mL} = 10^{-3}\text{ L}, 0.620 \mug/mL0.620\text{ \mu g/mL} is equal to 620 \mug/L620\text{ \mu g/L}, giving 1.79 \mumol/L1.79\text{ \mu mol/L}.

  2. Step 2

    Control=1.480346.46=0.00427 \mumol/L\text{Control} = \frac{1.480}{346.46} = 0.00427\text{ \mu mol/L}

    Correct

    1.480 \mug/mL×1000 mL/L346.46 \mug/\mumol=4.27 \mumol/L\frac{1.480\text{ \mu g/mL} \times 1000\text{ mL/L}}{346.46\text{ \mu g/\mu mol}} = 4.27\text{ \mu mol/L}

    You repeated the same unit conversion omission for the control group. Multiplying by 1000 mL/L1000\text{ mL/L} gives 1480 \mug/L/346.46 \mug/\mumol=4.27 \mumol/L1480\text{ \mu g/L} / 346.46\text{ \mu g/\mu mol} = 4.27\text{ \mu mol/L}.

  3. Step 3

    Percentage reduction=[0.00427−0.001790.00427]×100%=(0.002480.00427)×100%=58.1%\text{Percentage reduction} = \left[\frac{0.00427 - 0.00179}{0.00427}\right] \times 100\% = \left(\frac{0.00248}{0.00427}\right) \times 100\% = 58.1\%

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the percentage reduction formula Initial−FinalInitial×100%\frac{\text{Initial} - \text{Final}}{\text{Initial}} \times 100\%.

You accurately divided the mass values by the molar mass (346.46 g/mol346.46\text{ g/mol}) to obtain the numerical significand.

You rounded your final answers appropriately to three significant figures.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Unit conversion error (mL to L in denominator)

You treated \mug/mL\text{\mu g/mL} as if it were already per liter, omitting the factor of 1000 mL/L1000\text{ mL/L}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing compound units where the denominator requires scaling: when converting a concentration with volume in the denominator from mL\text{mL} to L\text{L}, dividing by 10−3 L10^{-3}\text{ L} is equivalent to multiplying the overall value by 10001000.

REASONING PATH
Your ACEpath teacher’s suggested approach
Denominator Unit Scaling
  • When converting units in a denominator, use dimensional analysis: 1 /mL=1000 /L1\text{ /mL} = 1000\text{ /L}.

  • Always write out full dimensional units with canceling factors: \mugmL×1000 mL1 L×1 \mumol346.46 \mug\frac{\text{\mu g}}{\text{mL}} \times \frac{1000\text{ mL}}{1\text{ L}} \times \frac{1\text{ \mu mol}}{346.46\text{ \mu g}}.

Order of Magnitude Sanity Check
  • One liter contains 1000 milliliters, so a liter must contain 1000 times more solute mass or moles than a single milliliter of the same solution.

  • Check if the numerical value increases when changing from a small volume base (mL\text{mL}) to a large volume base (L\text{L}).

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert the mass concentration from \mug/mL\text{\mu g/mL} to \mug/L\text{\mu g/L}: 0.620 \mug/mL×1000 mL/L=620 \mug/L0.620\text{ \mu g/mL} \times 1000\text{ mL/L} = 620\text{ \mu g/L}.

  2. Divide by molar mass to find the cross-fostered molar concentration: 620 \mug/L346.46 \mug/\mumol≈1.79 \mumol/L\frac{620\text{ \mu g/L}}{346.46\text{ \mu g/\mu mol}} \approx 1.79\text{ \mu mol/L}.

  3. Convert and divide for the control group: 1.480×1000346.46=1480346.46≈4.27 \mumol/L\frac{1.480 \times 1000}{346.46} = \frac{1480}{346.46} \approx 4.27\text{ \mu mol/L}.

Final answer

(1) Non-fostered control: 4.27 \mumol/L4.27\text{ \mu mol/L}; Cross-fostered: 1.79 \mumol/L1.79\text{ \mu mol/L}; (2) 58.1%58.1\% reduction

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice chain-rule dimensional analysis by explicitly writing units for both the numerator and denominator.

  • Verify that a per-liter concentration is always 10001000 times larger than a per-milliliter concentration for the same solution.

OverviewACEpath Teacher's Diagnosis

03 The student calculates the ratio of the cross-fostered value to the control value instead of the percentage reduction.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    1 \mug/mL=1000 \mug/L  ⟹  Cross-fostered=0.620×1000346.46=1.79 \mumol/L1\text{ \mu g/mL} = 1000\text{ \mu g/L} \implies \text{Cross-fostered} = \frac{0.620 \times 1000}{346.46} = 1.79\text{ \mu mol/L}

  2. Step 2

    Control=1.480×1000346.46=4.27 \mumol/L\text{Control} = \frac{1.480 \times 1000}{346.46} = 4.27\text{ \mu mol/L}

  3. Step 3

    Percentage reduction=(0.6201.480)×100%\text{Percentage reduction} = \left(\frac{0.620}{1.480}\right) \times 100\%

    Correct

    Percentage reduction=1.480−0.6201.480×100%\text{Percentage reduction} = \frac{1.480 - 0.620}{1.480} \times 100\%

    You divided the cross-fostered value directly by the baseline control value, which gives the ratio of the new value relative to the control rather than the amount decreased.

  4. Step 4

    Percentage reduction=41.9%\text{Percentage reduction} = 41.9\%

    Correct

    Percentage reduction=58.1%\text{Percentage reduction} = 58.1\%

    Because the formula setup measured the remaining percentage rather than the reduction, your final percentage is the complement of the true reduction (100%−41.9%=58.1%100\% - 41.9\% = 58.1\%).

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly related \mug/mL\text{\mu g/mL} to \mug/L\text{\mu g/L} using the factor of 10001000.

You divided by the molar mass correctly to yield accurate molar concentrations in \mumol/L\text{\mu mol/L} for both groups.

You rounded your intermediate concentrations properly to three significant figures.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Ratio instead of percent change

You computed the fraction of baseline corticosterone that remained (41.9%41.9\%) instead of the fraction lost.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the post-treatment ratio finalinitial\frac{\text{final}}{\text{initial}} with the fractional reduction initial−finalinitial\frac{\text{initial} - \text{final}}{\text{initial}}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Percentage Reduction vs. Percentage Remaining
  • Percentage reduction=initial−finalinitial×100%=100%−(finalinitial×100%)\text{Percentage reduction} = \frac{\text{initial} - \text{final}}{\text{initial}} \times 100\% = 100\% - \left(\frac{\text{final}}{\text{initial}} \times 100\%\right)

  • Always subtract the final value from the initial value in the numerator before dividing by the initial baseline value.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Find the absolute reduction in plasma corticosterone: ΔC=1.480 \mug/mL−0.620 \mug/mL=0.860 \mug/mL\Delta C = 1.480\text{ \mu g/mL} - 0.620\text{ \mu g/mL} = 0.860\text{ \mu g/mL}.

  2. Divide by the non-fostered control baseline: 0.8601.480≈0.58108\frac{0.860}{1.480} \approx 0.58108.

  3. Multiply by 100%100\% and round to three significant figures: 58.1%58.1\%.

Final answer

(1) Non-fostered control: 4.27 \mumol/L4.27\text{ \mu mol/L}; Cross-fostered: 1.79 \mumol/L1.79\text{ \mu mol/L}; (2) 58.1%58.1\% reduction

NEXT STEPS
Final Takeaways from Your Teacher
  • Double-check percentage wordings: 'percent of control' means finalinitial×100%\frac{\text{final}}{\text{initial}} \times 100\%, whereas 'percentage reduction' requires finding the difference initial−finalinitial×100%\frac{\text{initial} - \text{final}}{\text{initial}} \times 100\%.

  • Practice using the identity Percentage reduction=100%−(% of control)\text{Percentage reduction} = 100\% - (\%\text{ of control}) as a quick self-check.

Lock it in

Similar question

01

In a behavioral pharmacology experiment, motor activity in rats decreased from a baseline control value of 450 beam breaks/hour450\text{ beam breaks/hour} to 180 beam breaks/hour180\text{ beam breaks/hour} following administration of a dopamine antagonist. Calculate the percentage reduction in motor activity attributable to the antagonist. Round your answer to three significant figures.

Answer

60.0%60.0\%. Key steps: Absolute reduction =450−180=270 beam breaks/hour= 450 - 180 = 270\text{ beam breaks/hour}. Percentage reduction =270450×100%=0.600×100%=60.0%= \frac{270}{450} \times 100\% = 0.600 \times 100\% = 60.0\%.

02

A rodent stress study measures salivary cortisol levels in non-handled controls as 0.350 \mug/mL0.350\text{ \mu g/mL} and in neonatal-handled adults as 0.140 \mug/mL0.140\text{ \mu g/mL}. Given that the molar mass of cortisol is 362.46 g/mol362.46\text{ g/mol}, (a) convert both concentrations to \mumol/L\text{\mu mol/L} and (b) calculate the percentage reduction in cortisol level in the handled group compared to the control group. Round to three significant figures.

Answer

(a) Control: 0.966 \mumol/L0.966\text{ \mu mol/L}; Handled: 0.386 \mumol/L0.386\text{ \mu mol/L}; (b) 60.0%60.0\%. Key steps: Control=0.350×1000362.46≈0.9656 \mumol/L\text{Control} = \frac{0.350 \times 1000}{362.46} \approx 0.9656\text{ \mu mol/L}; Handled=0.140×1000362.46≈0.3862 \mumol/L\text{Handled} = \frac{0.140 \times 1000}{362.46} \approx 0.3862\text{ \mu mol/L}. Percentage reduction =0.350−0.1400.350×100%=0.2100.350×100%=60.0%= \frac{0.350 - 0.140}{0.350} \times 100\% = \frac{0.210}{0.350} \times 100\% = 60.0\%.

03

In an epigenetic cross-fostering trial, adult offspring of wild-type mice exhibit an acoustic startle amplitude of 820 mV820\text{ mV}. Offspring cross-fostered to nurturing dams show an amplitude of 533 mV533\text{ mV}, while offspring subjected to maternal separation show an amplitude of 1148 mV1148\text{ mV}. Calculate: (a) the percentage reduction in startle amplitude due to nurturing foster care relative to wild-type controls, and (b) the percentage increase in startle amplitude due to maternal separation relative to wild-type controls. Round each answer to three significant figures.

Answer

(a) 35.0%35.0\% reduction; (b) 40.0%40.0\% increase. Key steps: (a) Reduction=820−533820×100%=287820×100%=35.0%\text{Reduction} = \frac{820 - 533}{820} \times 100\% = \frac{287}{820} \times 100\% = 35.0\%. (b) Increase=1148−820820×100%=328820×100%=40.0%\text{Increase} = \frac{1148 - 820}{820} \times 100\% = \frac{328}{820} \times 100\% = 40.0\%. Notice that both calculations use the same wild-type control (820 mV820\text{ mV}) as the reference baseline denominator.

Loading workspace…