Resources

A standard laboratory protocol uses digestive proteases to break down oligopeptides. Consider an aqueous solution containing 1.20×10201.20 \times 10^{20} identical linear hexapeptides (each consisting of 66 amino acid residues). If a protease catalyzes hydrolysis until exactly 75.0%75.0\% of all accessible peptide bonds are cleaved, determine: (a) the total number of peptide bonds originally present in the sample, (b) the total number of water molecules consumed at this threshold, and (c) the total number of separate peptide fragments (including free amino acids and shorter oligopeptides) remaining in the solution.

Answer and steps

Final answer

(a) 6.00×10206.00 \times 10^{20} peptide bonds; (b) 4.50×10204.50 \times 10^{20} H2O\text{H}_2\text{O} molecules; (c) 5.70×10205.70 \times 10^{20} fragments

Steps

Part (a): Total Peptide Bonds Originally Present

A linear peptide consisting of nn amino acid residues contains n−1n - 1 peptide bonds formed via dehydration condensation between adjacent residues:

Peptide bonds per hexapeptide=6−1=5\text{Peptide bonds per hexapeptide} = 6 - 1 = 5

To find the total number of peptide bonds initially present in the entire sample, multiply the number of bonds per molecule by the total number of hexapeptides:

Total peptide bonds=1.20×1020×5=6.00×1020 peptide bonds\text{Total peptide bonds} = 1.20 \times 10^{20} \times 5 = 6.00 \times 10^{20}\text{ peptide bonds}

Common Pitfall: Counting 66 bonds for 66 residues. A linear chain with nn monomeric units always has n−1n - 1 linking bonds, unlike a cyclic peptide which would have nn.


Part (b): Water Molecules Consumed

Hydrolysis is the chemical breakdown of a compound due to reaction with water. For every single peptide bond cleaved, exactly one molecule of water (HX2O\ce{H2O}) is consumed to restore the terminal carboxyl group (−COOH-\ce{COOH}) and amino group (−NHX2-\ce{NH2}):

Peptide bond+HX2O⟶−COOH+−NHX2−\text{Peptide bond} + \ce{H2O} \longrightarrow -\ce{COOH} + -\ce{NH2}-

The reaction cleaves 75.0%75.0\% of all accessible peptide bonds:

Bonds cleaved=0.750×6.00×1020=4.50×1020 bonds\text{Bonds cleaved} = 0.750 \times 6.00 \times 10^{20} = 4.50 \times 10^{20}\text{ bonds}

Because the stoichiometric ratio between cleaved peptide bonds and consumed water molecules is 1:11:1:

Water molecules consumed=4.50×1020 HX2O molecules\text{Water molecules consumed} = 4.50 \times 10^{20}\text{ }\ce{H2O}\text{ molecules}


Part (c): Total Peptide Fragments Remaining

Each cleavage event breaks one existing continuous chain into two separate pieces, adding net +1+1 fragment to the solution regardless of where along the chain the cleavage occurs.

Therefore, the final number of fragments equals the initial number of peptide chains plus the number of cleavages performed:

Total fragments=Initial peptides+Bonds cleaved\text{Total fragments} = \text{Initial peptides} + \text{Bonds cleaved}

Total fragments=1.20×1020+4.50×1020=5.70×1020 fragments\text{Total fragments} = 1.20 \times 10^{20} + 4.50 \times 10^{20} = 5.70 \times 10^{20}\text{ fragments}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student assumes a hexapeptide has 6 peptide bonds instead of 5, leading to an overestimation of initial bonds, water molecules consumed, and final fragments.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Number of peptide bonds per hexapeptide=6  ⟹  Total peptide bonds=(1.20×1020)×6=7.20×1020 peptide bonds\text{Number of peptide bonds per hexapeptide} = 6 \implies \text{Total peptide bonds} = (1.20 \times 10^{20}) \times 6 = 7.20 \times 10^{20}\text{ peptide bonds}

    Correct

    Peptide bonds per hexapeptide=6−1=5  ⟹  Total peptide bonds=(1.20×1020)×5=6.00×1020 peptide bonds\text{Peptide bonds per hexapeptide} = 6 - 1 = 5 \implies \text{Total peptide bonds} = (1.20 \times 10^{20}) \times 5 = 6.00 \times 10^{20}\text{ peptide bonds}

    A linear chain of nn amino acid residues contains n−1n - 1 peptide bonds because each bond connects two adjacent residues. For a hexapeptide (n=6n = 6), there are 6−1=56 - 1 = 5 peptide bonds, not 66.

  2. Step 2

    Bonds cleaved=0.750×(7.20×1020)=5.40×1020  ⟹  Each cleaved bond consumes 1HX2O, so water molecules consumed=5.40×1020\text{Bonds cleaved} = 0.750 \times (7.20 \times 10^{20}) = 5.40 \times 10^{20} \implies \text{Each cleaved bond consumes } 1\ce{ H2O}\text{, so water molecules consumed} = 5.40 \times 10^{20}

    Correct

    Bonds cleaved=0.750×(6.00×1020)=4.50×1020  ⟹  Water molecules consumed=4.50×1020HX2O molecules\text{Bonds cleaved} = 0.750 \times (6.00 \times 10^{20}) = 4.50 \times 10^{20} \implies \text{Water molecules consumed} = 4.50 \times 10^{20}\ce{ H2O}\text{ molecules}

    Your chemical reasoning is completely sound: each hydrolysis event cleaves one peptide bond and consumes exactly one molecule of water. Your numerical result is off solely due to carrying forward the value of 7.20×10207.20 \times 10^{20} instead of 6.00×10206.00 \times 10^{20}.

  3. Step 3

    Total fragments=initial molecules+cleaved bonds  ⟹  Total fragments=1.20×1020+5.40×1020=6.60×1020 fragments\text{Total fragments} = \text{initial molecules} + \text{cleaved bonds} \implies \text{Total fragments} = 1.20 \times 10^{20} + 5.40 \times 10^{20} = 6.60 \times 10^{20}\text{ fragments}

    Correct

    Total fragments=1.20×1020+4.50×1020=5.70×1020 fragments\text{Total fragments} = 1.20 \times 10^{20} + 4.50 \times 10^{20} = 5.70 \times 10^{20}\text{ fragments}

    Your fragment accounting principle is correct because each single cleavage event divides one continuous chain into two, adding exactly one net fragment. This calculation is affected only by the earlier bond-count error.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that enzymatic hydrolysis consumes one water molecule per cleaved peptide bond.

You formulated the correct relation that total final fragments equal initial peptide molecules plus the number of cleaved bonds.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Off-by-one residue vs bond count

You equated the number of peptide bonds in a linear peptide directly to the number of amino acid residues (nn) rather than using n−1n - 1.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the number of monomer units (amino acid residues) with the number of covalent linkages connecting them in an unbranched linear polymer.

REASONING PATH
Your ACEpath teacher’s suggested approach
Fencepost Principle for Linear Polymers
  • For any open, linear chain of nn monomers, the number of internal linkages is always n−1n - 1.

  • Sketch or visualize a small example (like a dipeptide with 2 residues and 1 bond) whenever counting bonds in an nn-mer.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Determine the initial number of peptide bonds using n−1=5n - 1 = 5: Total bonds=1.20×1020×5=6.00×1020\text{Total bonds} = 1.20 \times 10^{20} \times 5 = 6.00 \times 10^{20}.

  2. Calculate bonds cleaved and water consumed: 0.750×6.00×1020=4.50×1020 molecules of HX2O0.750 \times 6.00 \times 10^{20} = 4.50 \times 10^{20}\text{ molecules of }\ce{H2O}.

  3. Add cleavage events to initial molecules to find final fragments: 1.20×1020+4.50×1020=5.70×1020 fragments1.20 \times 10^{20} + 4.50 \times 10^{20} = 5.70 \times 10^{20}\text{ fragments}.

Final answer

(a) 6.00×10206.00 \times 10^{20} peptide bonds; (b) 4.50×10204.50 \times 10^{20} HX2O\ce{H2O} molecules; (c) 5.70×10205.70 \times 10^{20} fragments

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the distinction between linear biopolymers (n−1n - 1 bonds) and cyclic structures (nn bonds).

  • Practice quick mental checks with small oligopeptides (dipeptide, tripeptide) before scaling up to scientific notation.

OverviewACEpath Teacher's Diagnosis

02 The student incorrectly assumes that each bond cleavage produces 2 new fragments rather than adding 1 net fragment to the total count.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Bonds per hexapeptide=6−1=5  ⟹  Total peptide bonds=(1.20×1020)×5=6.00×1020 peptide bonds\text{Bonds per hexapeptide} = 6 - 1 = 5 \implies \text{Total peptide bonds} = (1.20 \times 10^{20}) \times 5 = 6.00 \times 10^{20}\text{ peptide bonds}

  2. Step 2

    Bonds cleaved=0.750×(6.00×1020)=4.50×1020  ⟹  1 HX2O is consumed per bond cleaved  ⟹  Total water molecules consumed=4.50×1020\text{Bonds cleaved} = 0.750 \times (6.00 \times 10^{20}) = 4.50 \times 10^{20} \implies 1\text{ }\ce{H2O}\text{ is consumed per bond cleaved} \implies \text{Total water molecules consumed} = 4.50 \times 10^{20}

  3. Step 3

    Cleaving 1 bond yields 2 fragments  ⟹  Total fragments=2×(4.50×1020)=9.00×1020 fragments\text{Cleaving }1\text{ bond yields }2\text{ fragments} \implies \text{Total fragments} = 2 \times (4.50 \times 10^{20}) = 9.00 \times 10^{20}\text{ fragments}

    Correct

    Total fragments=Initial peptides+Bonds cleaved=1.20×1020+4.50×1020=5.70×1020 fragments\text{Total fragments} = \text{Initial peptides} + \text{Bonds cleaved} = 1.20 \times 10^{20} + 4.50 \times 10^{20} = 5.70 \times 10^{20}\text{ fragments}

    While a single isolated cleavage splits one peptide into two pieces, the net increase in the total number of fragments is only +1+1 per cut (1 chain→2 pieces1\text{ chain} \rightarrow 2\text{ pieces}). Multiplying the number of cuts by 22 double-counts fragments and ignores the original chains present before hydrolysis.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly applied the (n−1)(n - 1) rule for peptide bonds in a linear chain of nn residues.

You accurately calculated 75.0%75.0\% of the total bonds to determine the extent of cleavage.

You correctly identified that hydrolysis consumes exactly one water molecule per cleaved peptide bond.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Net Fragment Accounting After Hydrolysis

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused the total fragments produced by an isolated cut (22 fragments) with the net change in fragment count (+1+1 fragment per cut relative to the starting pool of intact peptides).

REASONING PATH
Your ACEpath teacher’s suggested approach
Net Fragment Rule for Linear Cleavages
  • Each internal cleavage of a linear polymer increases the total number of fragments by exactly 11: Final fragments=Initial molecules+Cuts made\text{Final fragments} = \text{Initial molecules} + \text{Cuts made}.

  • Always add the number of bond cuts to the initial number of polymer molecules instead of multiplying cuts by 22.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Start with the initial number of intact hexapeptide molecules: Ninitial=1.20×1020N_{\text{initial}} = 1.20 \times 10^{20}.

  2. Recognize that every bond cleavage turns 11 continuous chain into 22 pieces, yielding a net increase of +1+1 fragment: ΔN=+1\Delta N = +1 per cut.

  3. Calculate the final fragment count: Total fragments=Ninitial+Ncleaved=1.20×1020+4.50×1020=5.70×1020 fragments\text{Total fragments} = N_{\text{initial}} + N_{\text{cleaved}} = 1.20 \times 10^{20} + 4.50 \times 10^{20} = 5.70 \times 10^{20}\text{ fragments}.

Final answer

(a) 6.00×10206.00 \times 10^{20} peptide bonds; (b) 4.50×10204.50 \times 10^{20} HX2O\ce{H2O} molecules; (c) 5.70×10205.70 \times 10^{20} fragments

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the conservation principle for polymer cleavage: kk cuts across MM separate linear chains always yield M+kM + k fragments.

  • Practice distinguishing between total pieces from an isolated cut versus net fragment gain in a multi-chain solution.

OverviewACEpath Teacher's Diagnosis

03 The student calculates the final number of fragments by simply multiplying the cleaved bonds by the initial number of molecules instead of adding them.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Bonds per hexapeptide=6−1=5  ⟹  Total peptide bonds=(1.20×1020)×5=6.00×1020 peptide bonds\text{Bonds per hexapeptide} = 6 - 1 = 5 \implies \text{Total peptide bonds} = (1.20 \times 10^{20}) \times 5 = 6.00 \times 10^{20}\text{ peptide bonds}

  2. Step 2

    Bonds cleaved=0.750×(6.00×1020)=4.50×1020  ⟹  Water molecules consumed=4.50×1020\text{Bonds cleaved} = 0.750 \times (6.00 \times 10^{20}) = 4.50 \times 10^{20} \implies \text{Water molecules consumed} = 4.50 \times 10^{20}

  3. Step 3

    Total fragments remaining=number of cleaved bonds=4.50×1020 fragments\text{Total fragments remaining} = \text{number of cleaved bonds} = 4.50 \times 10^{20}\text{ fragments}

    Correct

    Total fragments=Initial peptides+Bonds cleaved=1.20×1020+4.50×1020=5.70×1020 fragments\text{Total fragments} = \text{Initial peptides} + \text{Bonds cleaved} = 1.20 \times 10^{20} + 4.50 \times 10^{20} = 5.70 \times 10^{20}\text{ fragments}

    Each cleavage cut splits one existing continuous chain into two pieces, adding a net of +1+1 fragment to the solution. Therefore, the total number of fragments equals the initial number of peptide chains plus the number of cleavage events, rather than just the number of cleavage events alone.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the n−1n - 1 formula to determine the initial number of peptide bonds in a linear hexapeptide.

You correctly determined that each peptide bond cleaved consumes exactly one water molecule via hydrolysis.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omission of Initial State in Fragmentation

Equating total peptide fragments directly to the number of hydrolyzed bonds.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You overlooked that cleavage represents a net addition of fragments (+1+1 fragment per cut) to an already existing population of intact chains. In any linear polymer system, cutting CC bonds across N0N_0 initial separate chains yields N0+CN_0 + C fragments.

REASONING PATH
Your ACEpath teacher’s suggested approach
Linear Chain Fragment Counting
  • For any collection of N0N_0 linear chains undergoing CC internal cleavages, each cleavage event increases the total piece count by 11: Total fragments=N0+C\text{Total fragments} = N_0 + C.

  • Start with the initial number of molecules as the baseline fragment count, then add the total number of cleaved bonds.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Recall that before any hydrolysis takes place, the solution already contains 1.20×10201.20 \times 10^{20} intact hexapeptide chains, each counting as 11 fragment.

  2. Recognize that every single hydrolysis event splits an existing chain into two, creating exactly 11 additional separate fragment (+1+1 net fragment per cleavage).

  3. Add the number of cleavages to the initial number of peptides: Total fragments=1.20×1020+4.50×1020=5.70×1020\text{Total fragments} = 1.20 \times 10^{20} + 4.50 \times 10^{20} = 5.70 \times 10^{20}.

Final answer

(a) 6.00×1020 peptide bonds6.00 \times 10^{20}\text{ peptide bonds}; (b) 4.50×1020 HX2O molecules4.50 \times 10^{20}\text{ }\ce{H2O}\text{ molecules}; (c) $5.70 ×\times 10^{20} fragments\text{ fragments}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the conservation relationship between initial linear chains, internal cuts, and final fragments.

  • Practice solving polymer hydrolysis problems with partial cleavage thresholds to build confidence in tracking initial versus generated fragments.

Lock it in

Similar question

01

A sample contains 2.50×10182.50 \times 10^{18} linear octapeptides (8 residues each). If an endopeptidase hydrolyzes 40.0%40.0\% of all peptide bonds, how many water molecules are consumed?

Answer

7.00×10187.00 \times 10^{18} HX2O\ce{H2O} molecules. Each octapeptide has 8−1=78 - 1 = 7 peptide bonds, giving 2.50×1018×7=1.75×10192.50 \times 10^{18} \times 7 = 1.75 \times 10^{19} total bonds. Hydrolyzing 40.0%40.0\% cleaves 0.400×1.75×1019=7.00×10180.400 \times 1.75 \times 10^{19} = 7.00 \times 10^{18} bonds, consuming 7.00×10187.00 \times 10^{18} HX2O\ce{H2O} molecules.

02

An aqueous solution starts with 3.00×10193.00 \times 10^{19} linear decapeptides (10 residues each). After partial digestion, 1.20×10201.20 \times 10^{20} peptide bonds have been cleaved. What is the total number of peptide fragments (including any free amino acids) present in the solution?

Answer

1.50×10201.50 \times 10^{20} fragments. Each cleavage event adds one net fragment to the system. Total fragments equal initial peptide molecules plus cleavage events: 3.00×1019+1.20×1020=1.50×10203.00 \times 10^{19} + 1.20 \times 10^{20} = 1.50 \times 10^{20} fragments.

03

A mixture contains 1.00×10181.00 \times 10^{18} molecules of a cyclic pentapeptide and 2.00×10182.00 \times 10^{18} molecules of a linear pentapeptide. Calculate the minimum number of water molecules needed to completely hydrolyze all molecules in the mixture into individual free amino acids.

Answer

1.30×10191.30 \times 10^{19} HX2O\ce{H2O} molecules. A cyclic pentapeptide has 55 peptide bonds, so 1.00×1018×5=5.00×10181.00 \times 10^{18} \times 5 = 5.00 \times 10^{18} bonds. A linear pentapeptide has 5−1=45 - 1 = 4 peptide bonds, so 2.00×1018×4=8.00×10182.00 \times 10^{18} \times 4 = 8.00 \times 10^{18} bonds. Total bonds to cleave = 5.00×1018+8.00×1018=1.30×10195.00 \times 10^{18} + 8.00 \times 10^{18} = 1.30 \times 10^{19}, requiring 1.30×10191.30 \times 10^{19} HX2O\ce{H2O} molecules.

Loading workspace…