Resources

During intense metabolic activity in skeletal muscle, lactic acid (CH3CH(OH)COOH\text{CH}_3\text{CH(OH)COOH}, abbreviated HLac\text{HLac}, with Ka=1.38×10−4K_a = 1.38 \times 10^{-4} and M=90.08 g/molM = 90.08\text{ g/mol}) is produced and dissociates, altering cytosolic equilibrium. Consider an isolated model cytosol with a volume of 250 mL250\text{ mL} containing an initial unbuffered water environment at 25∘C25^\circ\text{C} into which 0.180 g0.180\text{ g} of lactic acid is released. Calculate: (a) the formal analytical molarity [HLac]0[\text{HLac}]_0 in the solution, (b) the equilibrium hydronium ion concentration [H3O+][\text{H}_3\text{O}^+] by evaluating the full quadratic expression of acid dissociation, and (c) the cytosolic pH\text{pH} resulting from this metabolic release.

Answer and steps

Final answer

(a) [HLac]0=8.00×10−3 M[\text{HLac}]_0 = 8.00 \times 10^{-3}\text{ M}; (b) [H3O+]=9.84×10−4 M[\text{H}_3\text{O}^+] = 9.84 \times 10^{-4}\text{ M}; (c) pH=3.01\text{pH} = 3.01

Steps

Part (a): Determining the Initial Analytical Concentration [HLac]0[\ce{HLac}]_0

  1. Calculate the amount of lactic acid in moles: Using the given mass (m=0.180 gm = 0.180\text{ g}) and molar mass (M=90.08 g/molM = 90.08\text{ g/mol}): n=mM=0.180 g90.08 g/mol≈1.9982×10−3 moln = \frac{m}{M} = \frac{0.180\text{ g}}{90.08\text{ g/mol}} \approx 1.9982 \times 10^{-3}\text{ mol}
  2. Calculate the molarity in the 250 mL250\text{ mL} volume: Convert volume to liters (V=250 mL=0.250 LV = 250\text{ mL} = 0.250\text{ L}): [HLac]0=nV=1.9982×10−3 mol0.250 L≈8.00×10−3 M[\ce{HLac}]_0 = \frac{n}{V} = \frac{1.9982 \times 10^{-3}\text{ mol}}{0.250\text{ L}} \approx 8.00 \times 10^{-3}\text{ M}

Part (b): Finding [HX3OX+][\ce{H_3O^+}] via the Full Quadratic Equation

  1. Set up the equilibrium expression: Lactic acid is a weak monoprotic acid that dissociates in water according to the reaction: HLac+HX2O⇌HX3OX++LacX−\ce{HLac + H2O <=> H3O+ + Lac-}

    Using an ICE (Initial, Change, Equilibrium) table with x=[HX3OX+]=[LacX−]x = [\ce{H_3O^+}] = [\ce{Lac-}]:

    • [HLac]eq=[HLac]0−x[\ce{HLac}]_{\text{eq}} = [\ce{HLac}]_0 - x
    • [HX3OX+]eq=x[\ce{H_3O^+}]_{\text{eq}} = x
    • [LacX−]eq=x[\ce{Lac-}]_{\text{eq}} = x

    The acid dissociation constant expression is: Ka=[HX3OX+][LacX−][HLac]=x2[HLac]0−xK_a = \frac{[\ce{H_3O^+}][\ce{Lac-}]}{[\ce{HLac}]} = \frac{x^2}{[\ce{HLac}]_0 - x}

  2. Formulate the quadratic equation: Pitfall Note: Because Ka=1.38×10−4K_a = 1.38 \times 10^{-4} is relatively large compared to [HLac]0=8.00×10−3 M[\ce{HLac}]_0 = 8.00 \times 10^{-3}\text{ M} (the ratio [HLac]0Ka≈58\frac{[\ce{HLac}]_0}{K_a} \approx 58, which is well below the standard threshold of 400400), the approximation [HLac]0−x≈[HLac]0[\ce{HLac}]_0 - x \approx [\ce{HLac}]_0 introduces significant error and the full quadratic must be solved.

    Rearranging the equation into standard quadratic form ax2+bx+c=0ax^2 + bx + c = 0: x2+Kax−Ka[HLac]0=0x^2 + K_a x - K_a [\ce{HLac}]_0 = 0

    Substituting the values Ka=1.38×10−4K_a = 1.38 \times 10^{-4} and [HLac]0=8.00×10−3 M[\ce{HLac}]_0 = 8.00 \times 10^{-3}\text{ M}: x2+(1.38×10−4)x−(1.38×10−4)(8.00×10−3)=0x^2 + (1.38 \times 10^{-4})x - (1.38 \times 10^{-4})(8.00 \times 10^{-3}) = 0 x2+(1.38×10−4)x−1.104×10−6=0x^2 + (1.38 \times 10^{-4})x - 1.104 \times 10^{-6} = 0

  3. Solve for xx: Applying the quadratic formula x=−b+b2−4ac2ax = \frac{-b + \sqrt{b^2 - 4ac}}{2a} (taking the positive root for concentration): b2−4ac=(1.38×10−4)2−4(1)(−1.104×10−6)\sqrt{b^2 - 4ac} = \sqrt{(1.38 \times 10^{-4})^2 - 4(1)(-1.104 \times 10^{-6})} b2−4ac=1.9044×10−8+4.416×10−6=4.4350×10−6≈2.1060×10−3\sqrt{b^2 - 4ac} = \sqrt{1.9044 \times 10^{-8} + 4.416 \times 10^{-6}} = \sqrt{4.4350 \times 10^{-6}} \approx 2.1060 \times 10^{-3}

    x=−1.38×10−4+2.1060×10−32=1.9680×10−32≈9.84×10−4 Mx = \frac{-1.38 \times 10^{-4} + 2.1060 \times 10^{-3}}{2} = \frac{1.9680 \times 10^{-3}}{2} \approx 9.84 \times 10^{-4}\text{ M}

    Therefore, at equilibrium: [HX3OX+]=9.84×10−4 M[\ce{H_3O^+}] = 9.84 \times 10^{-4}\text{ M}


Part (c): Calculating the Resulting pH\text{pH}

Using the definition of pH\text{pH}: pH=−log⁡10[HX3OX+]\text{pH} = -\log_{10}[\ce{H_3O^+}] pH=−log⁡10(9.84×10−4)=−(−3.007)≈3.01\text{pH} = -\log_{10}(9.84 \times 10^{-4}) = -(-3.007) \approx 3.01

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student ignores the volume conversion from milliliters to liters when calculating molarity, resulting in a concentration that is 1000 times too small.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    n=0.18090.08=0.00200 moln = \frac{0.180}{90.08} = 0.00200\text{ mol}

  2. Step 2

    [HLac]0=0.00200250=8.00×10−6 M[\text{HLac}]_0 = \frac{0.00200}{250} = 8.00 \times 10^{-6}\text{ M}

    Correct

    [HLac]0=1.998×10−3 mol0.250 L=8.00×10−3 M[\text{HLac}]_0 = \frac{1.998 \times 10^{-3}\text{ mol}}{0.250\text{ L}} = 8.00 \times 10^{-3}\text{ M}

    You divided the moles by volume in milliliters (250250) rather than converting the volume to liters (0.250 L0.250\text{ L}). Molarity requires volume in liters (mol/L\text{mol/L}), making your concentration 10001000 times too small.

  3. Step 3

    Ka=x2([HLac]0−x)=1.38×10−4  ⟹  x2+1.38×10−4x−1.104×10−9=0  ⟹  x=[H3O+]=7.56×10−6 MK_a = \frac{x^2}{([\text{HLac}]_0 - x)} = 1.38 \times 10^{-4} \implies x^2 + 1.38 \times 10^{-4}x - 1.104 \times 10^{-9} = 0 \implies x = [\text{H}_3\text{O}^+] = 7.56 \times 10^{-6}\text{ M}

    Correct

    x2+(1.38×10−4)x−1.104×10−6=0  ⟹  [H3O+]=9.84×10−4 Mx^2 + (1.38 \times 10^{-4})x - 1.104 \times 10^{-6} = 0 \implies [\text{H}_3\text{O}^+] = 9.84 \times 10^{-4}\text{ M}

    Your quadratic setup and quadratic formula calculation were mathematically sound, but they relied on the incorrect initial concentration from Step 2.

  4. Step 4

    pH=−log⁡(7.56×10−6)=5.12\text{pH} = -\log(7.56 \times 10^{-6}) = 5.12

    Correct

    pH=−log⁡10(9.84×10−4)=3.01\text{pH} = -\log_{10}(9.84 \times 10^{-4}) = 3.01

    You evaluated the logarithm correctly for your calculated [H3O+][\text{H}_3\text{O}^+], but the result was skewed by the earlier volume unit error.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used mass and molar mass to calculate the amount of substance in moles.

You correctly constructed the acid equilibrium expression without taking an invalid small-xx approximation.

You applied the quadratic formula accurately to solve for xx.

You used the correct definition of pH=−log⁡10[H3O+]\text{pH} = -\log_{10}[\text{H}_3\text{O}^+].

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Volume Unit Conversion Omission in Molarity

You substituted the volume directly as 250250 without converting milliliters to liters.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Overlooking dimensional consistency during the concentration step: molarity (MM) is defined as moles of solute per liter of solution (mol/L\text{mol/L}), not per milliliter.

REASONING PATH
Your ACEpath teacher’s suggested approach
Molarity Unit Definition
  • M=n (mol)V (L)M = \frac{n\text{ (mol)}}{V\text{ (L)}}, where 1 L=1000 mL1\text{ L} = 1000\text{ mL}.

  • Always convert volume into liters before dividing by moles by writing out the explicit conversion factor ×1 L1000 mL\times \frac{1\text{ L}}{1000\text{ mL}}.

Biological Sanity Check
  • Lactic acid is a moderately strong weak acid (Ka≈10−4K_a \approx 10^{-4}). An initial concentration of ∼10−2 M\sim 10^{-2}\text{ M} will lower the pH\text{pH} to around 33, whereas a pH\text{pH} of 5.125.12 implies almost neutral or extremely dilute acid.

  • Compare calculated initial concentrations against typical physiological or laboratory ranges (10−110^{-1} to 10−3 M10^{-3}\text{ M}) to catch order-of-magnitude unit slips.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert the solution volume to liters: V=250 mL×1 L1000 mL=0.250 LV = 250\text{ mL} \times \frac{1\text{ L}}{1000\text{ mL}} = 0.250\text{ L}.

  2. Calculate the formal analytical molarity: [HLac]0=1.9982×10−3 mol0.250 L=8.00×10−3 M[\text{HLac}]_0 = \frac{1.9982 \times 10^{-3}\text{ mol}}{0.250\text{ L}} = 8.00 \times 10^{-3}\text{ M}.

  3. Set up the full quadratic equation: x2+Kax−Ka[HLac]0=0  ⟹  x2+(1.38×10−4)x−1.104×10−6=0x^2 + K_a x - K_a [\text{HLac}]_0 = 0 \implies x^2 + (1.38 \times 10^{-4})x - 1.104 \times 10^{-6} = 0.

  4. Solve for the positive root: x=[H3O+]=−1.38×10−4+(1.38×10−4)2+4(1.104×10−6)2=9.84×10−4 Mx = [\text{H}_3\text{O}^+] = \frac{-1.38 \times 10^{-4} + \sqrt{(1.38 \times 10^{-4})^2 + 4(1.104 \times 10^{-6})}}{2} = 9.84 \times 10^{-4}\text{ M}.

  5. Calculate the final pH\text{pH}: pH=−log⁡10(9.84×10−4)=3.01\text{pH} = -\log_{10}(9.84 \times 10^{-4}) = 3.01.

Final answer

(a) [HLac]0=8.00×10−3 M[\text{HLac}]_0 = 8.00 \times 10^{-3}\text{ M}; (b) [H3O+]=9.84×10−4 M[\text{H}_3\text{O}^+] = 9.84 \times 10^{-4}\text{ M}; (c) pH=3.01\text{pH} = 3.01

NEXT STEPS
Final Takeaways from Your Teacher
  • Write out explicit units with every numerical quantity when calculating concentrations.

  • Check that volume is converted to liters whenever using the molarity formula c=nVc = \frac{n}{V}.

  • Perform the follow-up practice exercises to reinforce unit tracking in acid-base equilibria.

OverviewACEpath Teacher's Diagnosis

02 The student uses the small x approximation instead of solving the quadratic equation, which is invalid because the acid is significantly dissociated.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    n=0.18090.08=0.00200 mol  ⟹  [HLac]0=0.002000.250=8.00×10−3 Mn = \frac{0.180}{90.08} = 0.00200\text{ mol} \implies [\text{HLac}]_0 = \frac{0.00200}{0.250} = 8.00 \times 10^{-3}\text{ M}

  2. Step 2

    Ka=x2[HLac]0  ⟹  1.38×10−4=x28.00×10−3  ⟹  x2=1.104×10−6  ⟹  x=1.05×10−3 M  ⟹  [H3O+]=1.05×10−3 MK_a = \frac{x^2}{[\text{HLac}]_0} \implies 1.38 \times 10^{-4} = \frac{x^2}{8.00 \times 10^{-3}} \implies x^2 = 1.104 \times 10^{-6} \implies x = 1.05 \times 10^{-3}\text{ M} \implies [\text{H}_3\text{O}^+] = 1.05 \times 10^{-3}\text{ M}

    Correct

    x2+(1.38×10−4)x−1.104×10−6=0  ⟹  x=[H3O+]=9.84×10−4 Mx^2 + (1.38 \times 10^{-4})x - 1.104 \times 10^{-6} = 0 \implies x = [\text{H}_3\text{O}^+] = 9.84 \times 10^{-4}\text{ M}

    You assumed [HLac]0−x≈[HLac]0[\text{HLac}]_0 - x \approx [\text{HLac}]_0, but the problem explicitly instructed you to solve the full quadratic equation. Moreover, because [HLac]0Ka=8.00×10−31.38×10−4≈58<400\frac{[\text{HLac}]_0}{K_a} = \frac{8.00 \times 10^{-3}}{1.38 \times 10^{-4}} \approx 58 < 400, the acid dissociates by over 12%12\%, making the small-xx approximation mathematically invalid.

  3. Step 3

    pH=−log⁡(1.05×10−3)=2.98\text{pH} = -\log(1.05 \times 10^{-3}) = 2.98

    Correct

    pH=−log⁡(9.84×10−4)=3.01\text{pH} = -\log(9.84 \times 10^{-4}) = 3.01

    Your logarithm formula and arithmetic were applied correctly, but your final numerical value was affected by the hydronium concentration from part (b).

WHAT YOU DID WELL
Compliments from Your Teacher

You accurately converted grams of lactic acid to moles using the correct molar mass.

You converted milliliters to liters to determine the correct initial analytical molarity.

You correctly defined pH=−log⁡[H3O+]\text{pH} = -\log[\text{H}_3\text{O}^+] and evaluated the logarithm accurately based on your intermediate value.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Invalid Equilibrium Approximation

none

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You defaulted to the small-xx approximation [HA]eq≈[HA]0[\text{HA}]_{\text{eq}} \approx [\text{HA}]_0 without checking the initial concentration-to-KaK_a ratio or heeding the prompt's explicit requirement to evaluate the full quadratic formula.

REASONING PATH
Your ACEpath teacher’s suggested approach
5% Rule and 400-Rule Check
  • The approximation [HA]0−x≈[HA]0[\text{HA}]_0 - x \approx [\text{HA}]_0 is valid only if [HA]0Ka≥400\frac{[\text{HA}]_0}{K_a} \ge 400 or if the ionization degree x[HA]0≤0.05\frac{x}{[\text{HA}]_0} \le 0.05 (5%5\%).

  • Always compute [HA]0Ka\frac{[\text{HA}]_0}{K_a} before simplifying the equilibrium denominator.

Standard Quadratic Arrangement
  • For a monoprotic weak acid equilibrium Ka=x2C0−xK_a = \frac{x^2}{C_0 - x}, the exact relationship is x2+Kax−KaC0=0x^2 + K_a x - K_a C_0 = 0.

  • Rearrange into standard form ax2+bx+c=0ax^2 + bx + c = 0 and apply x=−b+b2−4ac2ax = \frac{-b + \sqrt{b^2 - 4ac}}{2a}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the exact equilibrium expression: Ka=x2[HLac]0−x=x28.00×10−3−x=1.38×10−4K_a = \frac{x^2}{[\text{HLac}]_0 - x} = \frac{x^2}{8.00 \times 10^{-3} - x} = 1.38 \times 10^{-4}.

  2. Rearrange into quadratic form: x2+(1.38×10−4)x−1.104×10−6=0x^2 + (1.38 \times 10^{-4})x - 1.104 \times 10^{-6} = 0.

  3. Solve for the positive root: x=−1.38×10−4+(1.38×10−4)2−4(1)(−1.104×10−6)2=9.84×10−4 Mx = \frac{-1.38 \times 10^{-4} + \sqrt{(1.38 \times 10^{-4})^2 - 4(1)(-1.104 \times 10^{-6})}}{2} = 9.84 \times 10^{-4}\text{ M}.

  4. Calculate pH from the exact hydronium concentration: pH=−log⁡(9.84×10−4)=3.01\text{pH} = -\log(9.84 \times 10^{-4}) = 3.01.

Final answer

(a) [HLac]0=8.00×10−3 M[\text{HLac}]_0 = 8.00 \times 10^{-3}\text{ M}; (b) [H3O+]=9.84×10−4 M[\text{H}_3\text{O}^+] = 9.84 \times 10^{-4}\text{ M}; (c) pH=3.01\text{pH} = 3.01

NEXT STEPS
Final Takeaways from Your Teacher
  • Check the ratio [HA]0Ka\frac{[\text{HA}]_0}{K_a} before deciding whether to drop xx from the denominator.

  • Read problem instructions carefully for explicit directives such as 'evaluating the full quadratic expression'.

  • Practice solving weak acid equilibrium problems where ionization exceeds 5%5\% using the quadratic formula.

OverviewACEpath Teacher's Diagnosis

03 The student writes the quadratic formula with an incorrect sign on the linear coefficient, using -b as positive b, which leads to an erroneous hydronium concentration.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    n=0.18090.08=0.00200 mol  ⟹  [HLac]0=0.002000.250=8.00×10−3 Mn = \frac{0.180}{90.08} = 0.00200\text{ mol} \implies [\text{HLac}]_0 = \frac{0.00200}{0.250} = 8.00 \times 10^{-3}\text{ M}

  2. Step 2

    x2+1.38×10−4x−1.104×10−6=0x^2 + 1.38 \times 10^{-4}x - 1.104 \times 10^{-6} = 0

  3. Step 3

    x=1.38×10−4+(1.38×10−4)2+4(1.104×10−6)2  ⟹  x=1.38×10−4+0.0021062=1.12×10−3 M  ⟹  [H3O+]=1.12×10−3 Mx = \frac{1.38 \times 10^{-4} + \sqrt{(1.38 \times 10^{-4})^2 + 4(1.104 \times 10^{-6})}}{2} \implies x = \frac{1.38 \times 10^{-4} + 0.002106}{2} = 1.12 \times 10^{-3}\text{ M} \implies [\text{H}_3\text{O}^+] = 1.12 \times 10^{-3}\text{ M}

    Correct

    x=−b+b2−4ac2a=−1.38×10−4+(1.38×10−4)2−4(1)(−1.104×10−6)2≈9.84×10−4 Mx = \frac{-b + \sqrt{b^2 - 4ac}}{2a} = \frac{-1.38 \times 10^{-4} + \sqrt{(1.38 \times 10^{-4})^2 - 4(1)(-1.104 \times 10^{-6})}}{2} \approx 9.84 \times 10^{-4}\text{ M}

    In the quadratic formula x=−b±b2−4ac2ax = \frac{-b \pm \sqrt{b^2 - 4ac}}{2a}, the leading term is −b-b. Since b=+1.38×10−4b = +1.38 \times 10^{-4}, the numerator must begin with −1.38×10−4-1.38 \times 10^{-4}, giving −1.38×10−4+2.106×10−32=9.84×10−4 M\frac{-1.38 \times 10^{-4} + 2.106 \times 10^{-3}}{2} = 9.84 \times 10^{-4}\text{ M}.

  4. Step 4

    pH=−log⁡(1.12×10−3)=2.95\text{pH} = -\log(1.12 \times 10^{-3}) = 2.95

    Correct

    pH=−log⁡(9.84×10−4)≈3.01\text{pH} = -\log(9.84 \times 10^{-4}) \approx 3.01

    Your logarithm calculation correctly followed your evaluated hydronium ion concentration, but the final numerical value is affected by the sign error in Step 3.

WHAT YOU DID WELL
Compliments from Your Teacher

You accurately converted grams of lactic acid to moles using the correct molar mass.

You found the analytical concentration [HLac]0=8.00×10−3 M[\text{HLac}]_0 = 8.00 \times 10^{-3}\text{ M} using the solution volume.

You recognized that weak acid dissociation requires the full quadratic formula and set up the equation x2+Kax−Ka[HLac]0=0x^2 + K_a x - K_a[\text{HLac}]_0 = 0 perfectly.

You evaluated the discriminant b2−4ac\sqrt{b^2 - 4ac} accurately.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Formula Sign Error

You omitted the leading negative sign on −b-b when writing out the quadratic formula, substituting +1.38×10−4+1.38 \times 10^{-4} instead of −1.38×10−4-1.38 \times 10^{-4}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the coefficient bb itself with the term −b-b required in the quadratic formula x=−b±b2−4ac2ax = \frac{-b \pm \sqrt{b^2 - 4ac}}{2a} when bb is positive.

REASONING PATH
Your ACEpath teacher’s suggested approach
Quadratic Formula Sign Verification
  • For ax2+bx+c=0ax^2 + bx + c = 0, the roots are given by x=−b±b2−4ac2ax = \frac{-b \pm \sqrt{b^2 - 4ac}}{2a}.

  • Always explicitly write down the formula with parentheses, such as −(+b)-(+b), before substituting numbers so the negative sign is never dropped.

Equilibrium Concentration Reality Check
  • For a weak acid where Ka<[HA]0K_a < [\text{HA}]_0, the exact root xx must be strictly less than the approximate root Ka[HA]0\sqrt{K_a [\text{HA}]_0}.

  • Calculate Ka[HLac]0=1.104×10−6≈1.05×10−3 M\sqrt{K_a [\text{HLac}]_0} = \sqrt{1.104 \times 10^{-6}} \approx 1.05 \times 10^{-3}\text{ M}. Because dissociation is incomplete, the exact [extH3extO+][ ext{H}_3 ext{O}^+] must be smaller than 1.05×10−3 M1.05 \times 10^{-3}\text{ M}, immediately flagging 1.12×10−3 M1.12 \times 10^{-3}\text{ M} as impossible.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the quadratic formula with the explicit negative sign: x=−b+b2−4ac2ax = \frac{-b + \sqrt{b^2 - 4ac}}{2a}.

  2. Substitute b=1.38×10−4b = 1.38 \times 10^{-4} and the evaluated square root: x=−1.38×10−4+2.1060×10−32x = \frac{-1.38 \times 10^{-4} + 2.1060 \times 10^{-3}}{2}.

  3. Compute the numerator: −0.138×10−3+2.1060×10−3=1.9680×10−3 M-0.138 \times 10^{-3} + 2.1060 \times 10^{-3} = 1.9680 \times 10^{-3}\text{ M}.

  4. Divide by 22: [H3O+]=9.84×10−4 M[\text{H}_3\text{O}^+] = 9.84 \times 10^{-4}\text{ M}.

  5. Recalculate pH\text{pH}: pH=−log⁡10(9.84×10−4)=3.01\text{pH} = -\log_{10}(9.84 \times 10^{-4}) = 3.01.

Final answer

(a) [HLac]0=8.00×10−3 M[\text{HLac}]_0 = 8.00 \times 10^{-3}\text{ M}; (b) [H3O+]=9.84×10−4 M[\text{H}_3\text{O}^+] = 9.84 \times 10^{-4}\text{ M}; (c) pH=3.01\text{pH} = 3.01

NEXT STEPS
Final Takeaways from Your Teacher
  • Write out the quadratic formula symbolically with parentheses around each parameter before inserting values.

  • Use the quick benchmark Ka⋅C0\sqrt{K_a \cdot C_0} to check if your exact quadratic root is physically plausible.

Lock it in

Similar question

01

A cell biologist dissolves 0.060 g0.060\text{ g} of acetic acid (CH3COOH\text{CH}_3\text{COOH}, M=60.05 g/molM = 60.05\text{ g/mol}) into unbuffered water to a final volume of 100 mL100\text{ mL}. Calculate the initial analytical concentration [CH3COOH]0[\text{CH}_3\text{COOH}]_0 in molarity (M\text{M}).

Answer

[CH3COOH]0=1.00×10−2 M[\text{CH}_3\text{COOH}]_0 = 1.00 \times 10^{-2}\text{ M}. Key steps: n=0.060 g60.05 g/mol=1.00×10−3 moln = \frac{0.060\text{ g}}{60.05\text{ g/mol}} = 1.00 \times 10^{-3}\text{ mol}; V=100 mL=0.100 LV = 100\text{ mL} = 0.100\text{ L}; [CH3COOH]0=1.00×10−3 mol0.100 L=0.0100 M[\text{CH}_3\text{COOH}]_0 = \frac{1.00 \times 10^{-3}\text{ mol}}{0.100\text{ L}} = 0.0100\text{ M}.

02

Pyruvic acid (CH3COCOOH\text{CH}_3\text{COCOOH}, Ka=4.10×10−3K_a = 4.10 \times 10^{-3}) accumulates in an experimental vessel. If 0.0440 g0.0440\text{ g} of pyruvic acid (M=88.06 g/molM = 88.06\text{ g/mol}) is dissolved in 200 mL200\text{ mL} of water, determine (a) [HPyr]0[\text{HPyr}]_0 and (b) the equilibrium concentration [H3O+][\text{H}_3\text{O}^+] using the quadratic equation.

Answer

(a) [HPyr]0=2.50×10−3 M[\text{HPyr}]_0 = 2.50 \times 10^{-3}\text{ M}; (b) [H3O+]=1.83×10−3 M[\text{H}_3\text{O}^+] = 1.83 \times 10^{-3}\text{ M}. Key steps: n=0.044088.06=5.00×10−4 moln = \frac{0.0440}{88.06} = 5.00 \times 10^{-4}\text{ mol}; V=0.200 LV = 0.200\text{ L}; [HPyr]0=5.00×10−40.200=2.50×10−3 M[\text{HPyr}]_0 = \frac{5.00 \times 10^{-4}}{0.200} = 2.50 \times 10^{-3}\text{ M}. Quadratic: x2+(4.10×10−3)x−(4.10×10−3)(2.50×10−3)=0  ⟹  x2+4.10×10−3x−1.025×10−5=0  ⟹  x=1.83×10−3 Mx^2 + (4.10 \times 10^{-3})x - (4.10 \times 10^{-3})(2.50 \times 10^{-3}) = 0 \implies x^2 + 4.10 \times 10^{-3}x - 1.025 \times 10^{-5} = 0 \implies x = 1.83 \times 10^{-3}\text{ M}.

03

A 125 mL125\text{ mL} muscle micro-compartment receives 0.0115 g0.0115\text{ g} of formic acid (HCOOH\text{HCOOH}, M=46.03 g/molM = 46.03\text{ g/mol}, Ka=1.80×10−4K_a = 1.80 \times 10^{-4}). Calculate the resulting pH\text{pH} using the full quadratic equilibrium expression.

Answer

pH=3.27\text{pH} = 3.27. Key steps: n=0.0115 g46.03 g/mol=2.50×10−4 moln = \frac{0.0115\text{ g}}{46.03\text{ g/mol}} = 2.50 \times 10^{-4}\text{ mol}; V=125 mL=0.125 LV = 125\text{ mL} = 0.125\text{ L}; [HCOOH]0=2.50×10−4 mol0.125 L=2.00×10−3 M[\text{HCOOH}]_0 = \frac{2.50 \times 10^{-4}\text{ mol}}{0.125\text{ L}} = 2.00 \times 10^{-3}\text{ M}. Ratio [HA]0Ka=2.00×10−31.80×10−4≈11.1<400\frac{[\text{HA}]_0}{K_a} = \frac{2.00 \times 10^{-3}}{1.80 \times 10^{-4}} \approx 11.1 < 400, requiring full quadratic: x2+(1.80×10−4)x−3.60×10−7=0  ⟹  x=[H3O+]=5.17×10−4 Mx^2 + (1.80 \times 10^{-4})x - 3.60 \times 10^{-7} = 0 \implies x = [\text{H}_3\text{O}^+] = 5.17 \times 10^{-4}\text{ M}; pH=−log⁡10(5.17×10−4)=3.27\text{pH} = -\log_{10}(5.17 \times 10^{-4}) = 3.27.

Loading workspace…