Resources

Leafcutter ants (Atta cephalotes) recruit nestmates to rich foraging vegetation by depositing trail pheromone containing methyl 4-methylpyrrole-2-carboxylate. A single forager lays a continuous linear trail of length L=15.0 mL = 15.0\text{ m} using an average deposition rate of 1.20×10−12 g/cm1.20\times 10^{-12}\text{ g/cm}. The molecular weight of the pheromone is 139.15 g/mol139.15\text{ g/mol}. To activate cooperative recruitment in worker ants, the linear concentration must reach an active behavioral threshold of at least 4.00×109 molecules/mm4.00\times 10^9\text{ molecules/mm}. (a) Convert the deposition rate into molecules/mm\text{molecules/mm}, and (b) determine the minimum integer number of successful ant passes required along the 15.0 m15.0\text{ m} trail to raise the pheromone density above the recruitment threshold.

Answer and steps

Final answer

(a) 5.20×108 molecules/mm5.20\times 10^8\text{ molecules/mm} per ant pass; (b) Minimum of 88 ant passes (since 4.00×1095.20×108≈7.69\frac{4.00\times 10^9}{5.20\times 10^8} \approx 7.69).

Steps

Part (a): Convert the Deposition Rate to Molecules per Millimeter

  1. Convert the linear mass density from g/cm\text{g/cm} to g/mm\text{g/mm}: Since 1 cm=10 mm1\text{ cm} = 10\text{ mm}, divide the mass rate by 1010: Deposition rate in g/mm=1.20×10−12 g/cm10 mm/cm=1.20×10−13 g/mm\text{Deposition rate in g/mm} = \frac{1.20 \times 10^{-12}\text{ g/cm}}{10\text{ mm/cm}} = 1.20 \times 10^{-13}\text{ g/mm}
  2. Convert mass per millimeter to moles per millimeter: Using the molar mass of the pheromone (M=139.15 g/molM = 139.15\text{ g/mol}): Moles per mm=1.20×10−13 g/mm139.15 g/mol≈8.624×10−16 mol/mm\text{Moles per mm} = \frac{1.20 \times 10^{-13}\text{ g/mm}}{139.15\text{ g/mol}} \approx 8.624 \times 10^{-16}\text{ mol/mm}
  3. Convert moles per millimeter to molecules per millimeter: Multiply by Avogadro's constant (NA≈6.022×1023 molecules/molN_{\text{A}} \approx 6.022 \times 10^{23}\text{ molecules/mol}): Molecules per mm=(8.624×10−16 mol/mm)⋅(6.022×1023 molecules/mol)≈5.20×108 molecules/mm\text{Molecules per mm} = (8.624 \times 10^{-16}\text{ mol/mm}) \cdot (6.022 \times 10^{23}\text{ molecules/mol}) \approx 5.20 \times 10^8\text{ molecules/mm}

Each pass of a foraging ant deposits approximately 5.20×108 molecules/mm5.20 \times 10^8\text{ molecules/mm}.


Part (b): Determine the Minimum Number of Ant Passes

  1. Relate the threshold density to individual passes: Let nn be the number of ant passes. For the trail to initiate recruitment, the total linear concentration of pheromone must meet or exceed the behavioral threshold: n⋅(5.20×108 molecules/mm)≥4.00×109 molecules/mmn \cdot (5.20 \times 10^8\text{ molecules/mm}) \ge 4.00 \times 10^9\text{ molecules/mm}
  2. Solve for nn: n≥4.00×109 molecules/mm5.20×108 molecules/mm≈7.69n \ge \frac{4.00 \times 10^9\text{ molecules/mm}}{5.20 \times 10^8\text{ molecules/mm}} \approx 7.69
  3. Round to the nearest whole integer: Because an individual ant pass is discrete, 77 passes provide only 7⋅5.20×108=3.64×109 molecules/mm7 \cdot 5.20 \times 10^8 = 3.64 \times 10^9\text{ molecules/mm}, which falls short of the threshold. Therefore, the minimum integer number of passes required is: n=8n = 8

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student multiplies by 10 instead of dividing by 10 when converting the denominator unit from centimeters to millimeters.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Deposition rate=1.20×10−12 g/cm×10 mm/cm=1.20×10−11 g/mm\text{Deposition rate} = 1.20 \times 10^{-12}\text{ g/cm} \times 10\text{ mm/cm} = 1.20 \times 10^{-11}\text{ g/mm}

    Correct

    Deposition rate=1.20×10−12 g/cm10 mm/cm=1.20×10−13 g/mm\text{Deposition rate} = \frac{1.20 \times 10^{-12}\text{ g/cm}}{10\text{ mm/cm}} = 1.20 \times 10^{-13}\text{ g/mm}

    Because centimeters are in the denominator, you must multiply by 1 cm10 mm\frac{1\text{ cm}}{10\text{ mm}} to cancel cm\text{cm}. Multiplying by 1010 increased the mass density by 1010 instead of reducing it by 1010.

  2. Step 2

    Moles per mm=1.20×10−11 g/mm139.15 g/mol=8.62×10−14 mol/mm\text{Moles per mm} = \frac{1.20 \times 10^{-11}\text{ g/mm}}{139.15\text{ g/mol}} = 8.62 \times 10^{-14}\text{ mol/mm}

    Correct

    Moles per mm=1.20×10−13 g/mm139.15 g/mol≈8.62×10−16 mol/mm\text{Moles per mm} = \frac{1.20 \times 10^{-13}\text{ g/mm}}{139.15\text{ g/mol}} \approx 8.62 \times 10^{-16}\text{ mol/mm}

    You correctly divided by the molar mass 139.15 g/mol139.15\text{ g/mol}, but the numerical result inherited the tenfold error from Step 1.

  3. Step 3

    Molecules per mm=8.62×10−14 mol/mm×6.022×1023 molecules/mol=5.19×1010 molecules/mm\text{Molecules per mm} = 8.62 \times 10^{-14}\text{ mol/mm} \times 6.022 \times 10^{23}\text{ molecules/mol} = 5.19 \times 10^{10}\text{ molecules/mm}

    Correct

    Molecules per mm=8.624×10−16 mol/mm×6.022×1023 molecules/mol≈5.20×108 molecules/mm\text{Molecules per mm} = 8.624 \times 10^{-16}\text{ mol/mm} \times 6.022 \times 10^{23}\text{ molecules/mol} \approx 5.20 \times 10^8\text{ molecules/mm}

    You correctly multiplied by Avogadro's constant, but the result is two orders of magnitude too high due to the propagated denominator unit error.

  4. Step 4

    Passes=4.00×109 molecules/mm5.19×1010 molecules/mm=0.077  ⟹  Minimum integer number of passes=1 pass\text{Passes} = \frac{4.00 \times 10^9\text{ molecules/mm}}{5.19 \times 10^{10}\text{ molecules/mm}} = 0.077 \implies \text{Minimum integer number of passes} = 1\text{ pass}

    Correct

    n≥4.00×109 molecules/mm5.20×108 molecules/mm≈7.69  ⟹  n=8 passesn \ge \frac{4.00 \times 10^9\text{ molecules/mm}}{5.20 \times 10^8\text{ molecules/mm}} \approx 7.69 \implies n = 8\text{ passes}

    Your reasoning to divide the threshold by the per-pass rate and round up to the next integer was correct, but using the incorrect rate yielded 0.0770.077 instead of 7.697.69.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the molar mass of the pheromone to convert grams to moles.

You applied Avogadro's constant correctly to convert moles to molecules.

You recognized that the minimum number of passes requires rounding up to the next integer.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Denominator unit conversion inversion

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You multiplied by the length conversion factor (10 mm/cm10\text{ mm/cm}) instead of writing it as a fraction 1 cm10 mm\frac{1\text{ cm}}{10\text{ mm}} to cancel the denominator unit, effectively calculating with 1 mm=10 cm1\text{ mm} = 10\text{ cm}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Denominator Unit Cancellation
  • When converting a unit in the denominator, the existing unit must appear in the numerator of the conversion factor: 1cm×1 cm10 mm=110 mm\frac{1}{\text{cm}} \times \frac{1\text{ cm}}{10\text{ mm}} = \frac{1}{10\text{ mm}}.

  • Always write full fraction units with explicit canceling slashes rather than multiplying by bare conversion factors.

Physical Reality Check
  • A millimeter is smaller than a centimeter, so a given linear deposit must contain less mass in 1 mm1\text{ mm} than in 1 cm1\text{ cm}.

  • Check whether your converted rate is smaller: 1.20×10−13 g/mm<1.20×10−12 g/cm1.20 \times 10^{-13}\text{ g/mm} < 1.20 \times 10^{-12}\text{ g/cm} confirms division was appropriate.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Deposition rate=1.20×10−12 g/cm×1 cm10 mm=1.20×10−13 g/mm\text{Deposition rate} = 1.20 \times 10^{-12}\text{ g/cm} \times \frac{1\text{ cm}}{10\text{ mm}} = 1.20 \times 10^{-13}\text{ g/mm}

  2. Rate in molecules/mm=1.20×10−13 g/mm139.15 g/mol×6.022×1023 molecules/mol≈5.20×108 molecules/mm\text{Rate in molecules/mm} = \frac{1.20 \times 10^{-13}\text{ g/mm}}{139.15\text{ g/mol}} \times 6.022 \times 10^{23}\text{ molecules/mol} \approx 5.20 \times 10^8\text{ molecules/mm}

  3. Required passes=4.00×109 molecules/mm5.20×108 molecules/mm≈7.69\text{Required passes} = \frac{4.00 \times 10^9\text{ molecules/mm}}{5.20 \times 10^8\text{ molecules/mm}} \approx 7.69

  4. Minimum integer passes=⌈7.69⌉=8\text{Minimum integer passes} = \lceil 7.69 \rceil = 8

Final answer

(a) 5.20×108 molecules/mm5.20 \times 10^8\text{ molecules/mm}; (b) 8 passes8\text{ passes}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice converting rates and densities where the unit to convert is in the denominator.

  • Use explicit fraction dimensional analysis (unit-factor method) on every conversion step.

  • Perform a quick order-of-magnitude sanity check comparing larger units to smaller units.

OverviewACEpath Teacher's Diagnosis

02 The student rounds down the fractional number of passes to the nearest lower integer rather than rounding up to meet the minimum threshold requirement.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    1.20×10−12 g/cm=1.20×10−13 g/mm  ⟹  (1.20×10−13 g/mm)/(139.15 g/mol)=8.624×10−16 mol/mm  ⟹  8.624×10−16 mol/mm×6.022×1023 molecules/mol=5.19×108 molecules/mm1.20\times 10^{-12}\text{ g/cm} = 1.20\times 10^{-13}\text{ g/mm} \implies (1.20\times 10^{-13}\text{ g/mm}) / (139.15\text{ g/mol}) = 8.624\times 10^{-16}\text{ mol/mm} \implies 8.624\times 10^{-16}\text{ mol/mm}\times 6.022\times 10^{23}\text{ molecules/mol} = 5.19\times 10^8\text{ molecules/mm}

  2. Step 2

    Passes=(4.00×109 molecules/mm)/(5.19×108 molecules/mm)=7.70 passes\text{Passes} = (4.00\times 10^9\text{ molecules/mm}) / (5.19\times 10^8\text{ molecules/mm}) = 7.70\text{ passes}

  3. Step 3

    Minimum integer number of passes=7 passes\text{Minimum integer number of passes} = 7\text{ passes}

    Correct

    n=⌈7.69⌉=8 passesn = \lceil 7.69 \rceil = 8\text{ passes}

    Because nn must satisfy the inequality n≥7.70n \ge 7.70, 77 full passes supply only 7×5.19×108≈3.63×109 molecules/mm7 \times 5.19\times 10^8 \approx 3.63\times 10^9\text{ molecules/mm}, which is insufficient to activate recruitment. Therefore, you must take the ceiling and round up to 88 integer passes.

WHAT YOU DID WELL
Compliments from Your Teacher

You accurately converted units from centimeters to millimeters.

You used Avogadro's number and molar mass properly to determine pheromone molecule density per pass.

You correctly formulated the ratio to determine the exact number of ant passes needed.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Truncating or rounding down an inequality threshold constraint

You truncated or rounded down the quotient to 77 instead of rounding up to meet the minimum threshold requirement.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Treating a minimum threshold inequality (n≥thresholdn \ge \text{threshold}) as standard integer rounding or truncation rather than applying the ceiling function.

REASONING PATH
Your ACEpath teacher’s suggested approach
Evaluate Threshold Constraints
  • If a discrete variable nn must meet a minimum requirement n⋅R≥Tn \cdot R \ge T, then n≥TRn \ge \frac{T}{R}, which requires taking the ceiling: n=⌈T/R⌉n = \lceil T / R \rceil.

  • Check whether the integer you selected actually reaches the target value by substituting it back: 7×(5.19×108)=3.63×109<4.00×1097 \times (5.19\times 10^8) = 3.63\times 10^9 < 4.00\times 10^9, confirming that 77 passes are insufficient.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set up the threshold condition as an inequality: n×(5.19×108 molecules/mm)≥4.00×109 molecules/mmn \times (5.19\times 10^8\text{ molecules/mm}) \ge 4.00\times 10^9\text{ molecules/mm}.

  2. Divide to find the lower bound on nn: n≥4.00×1095.19×108≈7.70n \ge \frac{4.00\times 10^9}{5.19\times 10^8} \approx 7.70.

  3. Take the smallest integer greater than or equal to 7.707.70: n=8n = 8.

Final answer

Minimum of 88 ant passes

NEXT STEPS
Final Takeaways from Your Teacher
  • Review inequality constraints where variables must represent discrete, indivisible units such as organisms, passes, or packets.

  • Whenever a problem asks for the minimum integer required to exceed or meet a threshold, always round up to the next integer if there is any fractional remainder.

OverviewACEpath Teacher's Diagnosis

03 The student multiplies the threshold density by the 15.0 m trail length, mistakenly attempting to find the total trail molecules before comparing to linear deposition rate.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Deposition rate=1.20×10−13 g/mm  ⟹  1.20×10−13 g/mm139.15 g/mol=8.624×10−16 mol/mm  ⟹  8.624×10−16 mol/mm×6.022×1023 molecules/mol=5.19×108 molecules/mm\text{Deposition rate} = 1.20 \times 10^{-13}\text{ g/mm} \implies \frac{1.20 \times 10^{-13}\text{ g/mm}}{139.15\text{ g/mol}} = 8.624 \times 10^{-16}\text{ mol/mm} \implies 8.624 \times 10^{-16}\text{ mol/mm} \times 6.022 \times 10^{23}\text{ molecules/mol} = 5.19 \times 10^8\text{ molecules/mm}

  2. Step 2

    Total molecules required=4.00×109 molecules/mm×15000 mm=6.00×1013 molecules  ⟹  Passes=6.00×1013 molecules5.19×108 molecules/mm=115606.9 passes\text{Total molecules required} = 4.00 \times 10^9\text{ molecules/mm} \times 15000\text{ mm} = 6.00 \times 10^{13}\text{ molecules} \implies \text{Passes} = \frac{6.00 \times 10^{13}\text{ molecules}}{5.19 \times 10^8\text{ molecules/mm}} = 115606.9\text{ passes}

    Correct

    n≥4.00×109 molecules/mm5.20×108 molecules/mm≈7.69n \ge \frac{4.00 \times 10^9\text{ molecules/mm}}{5.20 \times 10^8\text{ molecules/mm}} \approx 7.69

    Both the recruitment threshold (4.00×109 molecules/mm4.00 \times 10^9\text{ molecules/mm}) and the deposition rate (5.20×108 molecules/mm5.20 \times 10^8\text{ molecules/mm}) are already linear densities along the path. Dividing total molecules by linear density gives units of millimeters (115607 mm115607\text{ mm}), not a dimensionless count of passes. The 15.0 m15.0\text{ m} trail length is extraneous because density applies equally along any section of the trail.

  3. Step 3

    Minimum integer number of passes=115607 passes\text{Minimum integer number of passes} = 115607\text{ passes}

    Correct

    n=8 passesn = 8\text{ passes}

    You correctly rounded up to the next integer, but the value was carried over from the dimensional error in the previous step.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly scaled the deposition rate from centimeters to millimeters.

You used dimensional analysis correctly in part (a) with molar mass and Avogadro's constant.

You recognized that the final pass count must be rounded up to the next whole integer.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Dimensional Inconsistency (Density vs. Total Quantity)

You multiplied the linear concentration threshold by the trail length without scaling the deposition rate to total trail deposition, creating an inconsistent ratio of molecules to molecules per millimeter.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the given trail length as a necessary variable to calculate a total quantity, overlooking that both the recruitment threshold and the single-pass deposition are already expressed as intensive linear densities (molecules per millimeter).

REASONING PATH
Your ACEpath teacher’s suggested approach
Match Intensive vs. Extensive Units
  • Compare values using identical units: ratio of linear densities molecules/mmmolecules/mm\frac{\text{molecules/mm}}{\text{molecules/mm}} or ratio of total amounts moleculesmolecules\frac{\text{molecules}}{\text{molecules}}.

  • Check the units of both numerator and denominator before dividing to ensure they fully cancel into a dimensionless quantity.

Identify Extraneous Context Variables
  • If a behavioral threshold is defined per unit length, every segment of the trail must reach that concentration regardless of total length.

  • Do not multiply an intensive density by total length unless the problem explicitly asks for the total mass or total number of molecules deposited over the entire structure.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Compare the required linear density (4.00×109 molecules/mm4.00 \times 10^9\text{ molecules/mm}) directly with the density added per pass (5.20×108 molecules/mm5.20 \times 10^8\text{ molecules/mm}).

  2. Calculate the exact number of passes needed: n=4.00×109 molecules/mm5.20×108 molecules/mm≈7.69n = \frac{4.00 \times 10^9\text{ molecules/mm}}{5.20 \times 10^8\text{ molecules/mm}} \approx 7.69.

  3. Round up to the nearest integer because 77 passes produce only 3.64×109 molecules/mm3.64 \times 10^9\text{ molecules/mm}, which is below threshold.

Final answer

(a) 5.20×108 molecules/mm5.20 \times 10^8\text{ molecules/mm}; (b) 8 passes8\text{ passes}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice checking that units cancel completely to a dimensionless number when solving for discrete counts.

  • Solve problems where some given dimensions (such as trail length or volume) are extraneous distractors.

Lock it in

Similar question

01

A fire ant deposits trail pheromone at 3.60×10−11 g/cm3.60 \times 10^{-11}\text{ g/cm}. Convert this linear density to g/mm\text{g/mm}.

Answer

Divide by 10 mm/cm10\text{ mm/cm}: 3.60×10−11 g/cm10 mm/cm=3.60×10−12 g/mm\frac{3.60 \times 10^{-11}\text{ g/cm}}{10\text{ mm/cm}} = 3.60 \times 10^{-12}\text{ g/mm}

02

A termite trail contains 1.80×10−13 g/mm1.80 \times 10^{-13}\text{ g/mm} of neocembrene (M=272.47 g/molM = 272.47\text{ g/mol}). How many molecules are present per millimeter?

Answer

First convert to moles per millimeter, then multiply by Avogadro's number: Moles/mm=1.80×10−13 g/mm272.47 g/mol≈6.606×10−16 mol/mm\text{Moles/mm} = \frac{1.80 \times 10^{-13}\text{ g/mm}}{272.47\text{ g/mol}} \approx 6.606 \times 10^{-16}\text{ mol/mm} Molecules/mm=(6.606×10−16 mol/mm)(6.022×1023 molecules/mol)≈3.98×108 molecules/mm\text{Molecules/mm} = (6.606 \times 10^{-16}\text{ mol/mm})(6.022 \times 10^{23}\text{ molecules/mol}) \approx 3.98 \times 10^8\text{ molecules/mm}

03

A foraging ant species lays an alarm pheromone trail at 2.50×108 molecules/mm2.50 \times 10^8\text{ molecules/mm} per pass. The behavioral threshold to switch nestmates from passive walking to aggressive recruitment is 1.80×109 molecules/mm1.80 \times 10^9\text{ molecules/mm}. What is the minimum integer number of ant passes needed to trigger recruitment?

Answer

Divide the threshold by the single-pass concentration: n=1.80×109 molecules/mm2.50×108 molecules/mm=7.2n = \frac{1.80 \times 10^9\text{ molecules/mm}}{2.50 \times 10^8\text{ molecules/mm}} = 7.2 Since 77 passes provide only 1.75×109 molecules/mm1.75 \times 10^9\text{ molecules/mm} (below threshold), round up to the next integer: Minimum passes=8\text{Minimum passes} = 8

Loading workspace…