Resources

A clinical nephrology team evaluates a patient's renal function using the renal clearance equation C=U×VPC = \frac{U \times V}{P}. Inulin is administered via continuous IV infusion until a steady plasma concentration of Pinulin=1.25 mg/mLP_{\text{inulin}} = 1.25\text{ mg/mL} is maintained. A timed urine collection over 120 min120\text{ min} yields a total urine volume of 180 mL180\text{ mL} with a measured urinary inulin concentration of Uinulin=95.0 mg/mLU_{\text{inulin}} = 95.0\text{ mg/mL}. Assuming inulin is freely filtered, neither reabsorbed nor secreted, calculate the patient's baseline glomerular filtration rate (GFRGFR) in mL/min\text{mL/min}.

Answer and steps

Final answer

GFR=114 mL/minGFR = 114\text{ mL/min}

Steps

01

Calculate the Urine Flow Rate (VV)

Understanding Renal Clearance and GFR

The glomerular filtration rate (GFRGFR) represents the total volume of fluid filtered from the glomerular capillaries into Bowman's capsule per unit time. Because inulin is freely filtered at the glomerulus and is neither reabsorbed nor secreted by the renal tubules, the rate at which inulin is filtered equals the rate at which it is excreted in the urine: Filtered Load=Excretion Rate\text{Filtered Load} = \text{Excretion Rate} GFR×Pinulin=Uinulin×VGFR \times P_{\text{inulin}} = U_{\text{inulin}} \times V Rearranging this relationship gives the renal clearance formula: GFR=Cinulin=Uinulin×VPinulinGFR = C_{\text{inulin}} = \frac{U_{\text{inulin}} \times V}{P_{\text{inulin}}} where:

  • UinulinU_{\text{inulin}} is the urine concentration of inulin (mg/mL\text{mg/mL})
  • VV is the urine flow rate (mL/min\text{mL/min})
  • PinulinP_{\text{inulin}} is the systemic plasma concentration of inulin (mg/mL\text{mg/mL})

A common pitfall is inserting the total collected urine volume (180 mL180\text{ mL}) directly into the clearance formula. The term VV must represent the flow rate in units of volume per unit time (mL/min\text{mL/min}):

V=Total Urine VolumeCollection Duration=180 mL120 min=1.5 mL/minV = \frac{\text{Total Urine Volume}}{\text{Collection Duration}} = \frac{180\text{ mL}}{120\text{ min}} = 1.5\text{ mL/min}


02

Calculate the Glomerular Filtration Rate (GFRGFR)

Substitute the given values into the clearance equation:

  • Uinulin=95.0 mg/mLU_{\text{inulin}} = 95.0\text{ mg/mL}
  • V=1.5 mL/minV = 1.5\text{ mL/min}
  • Pinulin=1.25 mg/mLP_{\text{inulin}} = 1.25\text{ mg/mL}

First, calculate the excretion rate of inulin (the numerator):

Excretion Rate=Uinulin×V=95.0 mg/mL×1.5 mL/min=142.5 mg/min\text{Excretion Rate} = U_{\text{inulin}} \times V = 95.0\text{ mg/mL} \times 1.5\text{ mL/min} = 142.5\text{ mg/min}

Next, divide by the plasma concentration:

GFR=142.5 mg/min1.25 mg/mL=114 mL/minGFR = \frac{142.5\text{ mg/min}}{1.25\text{ mg/mL}} = 114\text{ mL/min}

The patient's baseline glomerular filtration rate is 114 mL/min114\text{ mL/min}, which falls within the typical healthy adult range (90–120 mL/min90\text{--}120\text{ mL/min}).

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student uses total collected urine volume instead of calculating the urine flow rate per unit time, resulting in an erroneously high GFR of 13680 mL/min.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    GFR=U×VPGFR = \frac{U \times V}{P}

  2. Step 2

    V=180 mLV = 180\text{ mL}

    Correct

    V=180 mL120 min=1.5 mL/minV = \frac{180\text{ mL}}{120\text{ min}} = 1.5\text{ mL/min}

    In the renal clearance equation, VV represents the urine flow rate (volume per unit time), not the raw total volume collected. Because the 180 mL180\text{ mL} was collected over 120 min120\text{ min}, you need to divide volume by time to get 1.5 mL/min1.5\text{ mL/min}.

  3. Step 3

    GFR=95.0 mg/mL×180 mL1.25 mg/mLGFR = \frac{95.0\text{ mg/mL} \times 180\text{ mL}}{1.25\text{ mg/mL}}

    Correct

    GFR=95.0 mg/mL×1.5 mL/min1.25 mg/mLGFR = \frac{95.0\text{ mg/mL} \times 1.5\text{ mL/min}}{1.25\text{ mg/mL}}

    You substituted the given concentrations accurately, but this step carries forward the incorrect value of VV from step 2.

  4. Step 4

    GFR=13680 mL/minGFR = 13680\text{ mL/min}

    Correct

    GFR=114 mL/minGFR = 114\text{ mL/min}

    Your arithmetic follows correctly from your substituted numbers, but the result is inflated by a factor of 120120 due to the earlier flow rate error.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that inulin clearance represents glomerular filtration rate (GFRGFR).

You accurately recalled the clearance equation C=U×VPC = \frac{U \times V}{P}.

You extracted the correct plasma and urinary inulin concentrations from the problem statement.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Confusing total urine volume with urine flow rate

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the variable VV as static urine volume rather than a kinetic flow rate (volume divided by collection time). Clearance measures volume of plasma cleared per unit time, requiring all rate terms to share consistent time units.

REASONING PATH
Your ACEpath teacher’s suggested approach
Verify Variable Dimensions in Renal Clearance
  • In C=U×VPC = \frac{U \times V}{P}, VV must always have units of flow rate (mL/min\text{mL/min} or L/day\text{L/day}), calculated as Total VolumeCollection Time\frac{\text{Total Volume}}{\text{Collection Time}}.

  • Before substituting into the clearance formula, always divide the total collected volume by the duration of collection in minutes.

Physiological Sanity Check for GFR
  • Normal resting adult GFRGFR is approximately 90–120 mL/min90\text{--}120\text{ mL/min} (about 180 L/day180\text{ L/day}).

  • If your calculated GFRGFR yields thousands of milliliters per minute (e.g., >10,000 mL/min>10{,}000\text{ mL/min}), check whether you forgot to divide total volume by collection time.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Find the urine flow rate by dividing total volume by the collection time: V=180 mL120 min=1.5 mL/minV = \frac{180\text{ mL}}{120\text{ min}} = 1.5\text{ mL/min}.

  2. Substitute U=95.0 mg/mLU = 95.0\text{ mg/mL}, V=1.5 mL/minV = 1.5\text{ mL/min}, and P=1.25 mg/mLP = 1.25\text{ mg/mL} into the clearance formula: GFR=95.0 mg/mL×1.5 mL/min1.25 mg/mLGFR = \frac{95.0\text{ mg/mL} \times 1.5\text{ mL/min}}{1.25\text{ mg/mL}}.

  3. Calculate the urinary excretion rate (numerator): 95.0×1.5=142.5 mg/min95.0 \times 1.5 = 142.5\text{ mg/min}.

  4. Divide by plasma concentration: GFR=142.5 mg/min1.25 mg/mL=114 mL/minGFR = \frac{142.5\text{ mg/min}}{1.25\text{ mg/mL}} = 114\text{ mL/min}.

Final answer

GFR=114 mL/minGFR = 114\text{ mL/min}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the dimensional units of each term in clearance formulas to ensure rate terms contain time in the denominator.

  • Practice converting timed urine collections (e.g., 24 h24\text{ h}, 2 h2\text{ h}) into standardized flow rates of mL/min\text{mL/min}.

  • Always compare final GFR values to expected physiological baseline ranges (90–120 mL/min90\text{--}120\text{ mL/min}).

OverviewACEpath Teacher's Diagnosis

02 The student inverts the positions of urine concentration and plasma concentration in the clearance formula, yielding a GFR of approximately 0.0197 mL/min.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    V=180 mL120 min=1.5 mL/minV = \frac{180\text{ mL}}{120\text{ min}} = 1.5\text{ mL/min}

  2. Step 2

    GFR=(P×V)U  ⟹  GFR=(1.25 mg/mL×1.5 mL/min)95.0 mg/mLGFR = \frac{(P \times V)}{U} \implies GFR = \frac{(1.25\text{ mg/mL} \times 1.5\text{ mL/min})}{95.0\text{ mg/mL}}

    Correct

    GFR=U×VP=95.0 mg/mL×1.5 mL/min1.25 mg/mLGFR = \frac{U \times V}{P} = \frac{95.0\text{ mg/mL} \times 1.5\text{ mL/min}}{1.25\text{ mg/mL}}

    You inverted the plasma and urine concentrations. The excretion rate is U×VU \times V, so renal clearance is C=U×VPC = \frac{U \times V}{P}.

  3. Step 3

    GFR=0.0197 mL/minGFR = 0.0197\text{ mL/min}

    Correct

    GFR=114 mL/minGFR = 114\text{ mL/min}

    This numerical result was directly affected by substituting values into the inverted formula.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the urine flow rate by dividing the collected volume by the duration of collection.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverted Clearance Variables

You swapped the numerator and denominator positions of urine concentration (UU) and plasma concentration (PP).

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Renal clearance relies on the principle of mass balance: for an ideal marker like inulin, filtered load equals excretion rate (GFR×P=U×VGFR \times P = U \times V). Solving for GFRGFR yields U×VP\frac{U \times V}{P}, where the total excreted mass per minute (U×VU \times V) must be divided by the plasma concentration (PP). A quick physiological reality check reveals that a normal adult GFRGFR is around 90–120 mL/min90\text{--}120\text{ mL/min}, whereas 0.0197 mL/min0.0197\text{ mL/min} would indicate complete renal failure.

REASONING PATH
Your ACEpath teacher’s suggested approach
Mass Conservation in Clearance
  • Filtered Load=Excretion Rate  ⟹  GFR×P=U×V\text{Filtered Load} = \text{Excretion Rate} \implies GFR \times P = U \times V

  • Write down the mass-balance equality first to ensure U×VU \times V remains in the numerator when solving for GFRGFR.

Physiological Sanity Check
  • Normal resting adult GFRGFR is approximately 90 to 120 mL/min90\text{ to }120\text{ mL/min}.

  • Compare your final calculated value against typical physiological baseline ranges to catch upside-down fractions immediately.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. State the mass balance relation: GFR×Pinulin=Uinulin×VGFR \times P_{\text{inulin}} = U_{\text{inulin}} \times V

  2. Solve for GFRGFR: GFR=Uinulin×VPinulinGFR = \frac{U_{\text{inulin}} \times V}{P_{\text{inulin}}}

  3. Substitute the values: GFR=95.0 mg/mL×1.5 mL/min1.25 mg/mLGFR = \frac{95.0\text{ mg/mL} \times 1.5\text{ mL/min}}{1.25\text{ mg/mL}}

  4. Multiply the numerator to find the excretion rate: 95.0×1.5=142.5 mg/min95.0 \times 1.5 = 142.5\text{ mg/min}

  5. Divide by the plasma concentration: 142.51.25=114 mL/min\frac{142.5}{1.25} = 114\text{ mL/min}

Final answer

GFR=114 mL/minGFR = 114\text{ mL/min}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the derivation of renal clearance from mass balance so you always know which variable belongs in the numerator.

  • Check that the calculated GFRGFR matches expected physiological ranges (90–120 mL/min90\text{--}120\text{ mL/min} in healthy adults).

OverviewACEpath Teacher's Diagnosis

03 The student multiplies by time instead of dividing when calculating urine flow rate, using 21600 mL/min and calculating a GFR of 1641600 mL/min.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    V=180 mL×120 min=21600 mL/minV = 180\text{ mL} \times 120\text{ min} = 21600\text{ mL/min}

    Correct

    V=180 mL120 min=1.5 mL/minV = \frac{180\text{ mL}}{120\text{ min}} = 1.5\text{ mL/min}

    Urine flow rate VV is defined as volume per unit time (volumetime\frac{\text{volume}}{\text{time}}). Multiplying 180 mL×120 min180\text{ mL} \times 120\text{ min} yields 21600 mL⋅min21600\text{ mL}\cdot\text{min}, not 1.5 mL/min1.5\text{ mL/min}.

  2. Step 2

    GFR=U×VP  ⟹  GFR=(95.0 mg/mL×21600 mL/min)1.25 mg/mLGFR = \frac{U \times V}{P} \implies GFR = \frac{(95.0\text{ mg/mL} \times 21600\text{ mL/min})}{1.25\text{ mg/mL}}

    Correct

    GFR=U×VP  ⟹  GFR=95.0 mg/mL×1.5 mL/min1.25 mg/mLGFR = \frac{U \times V}{P} \implies GFR = \frac{95.0\text{ mg/mL} \times 1.5\text{ mL/min}}{1.25\text{ mg/mL}}

    You chose the correct renal clearance formula, but substituting the incorrect flow rate of 21600 mL/min21600\text{ mL/min} carried the initial error into this step.

  3. Step 3

    GFR=1641600 mL/minGFR = 1641600\text{ mL/min}

    Correct

    GFR=114 mL/minGFR = 114\text{ mL/min}

    Your arithmetic was carried out correctly from your substituted values, but the final value reflects the upstream error in the urine flow rate.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified and wrote down the renal clearance equation GFR=U×VPGFR = \frac{U \times V}{P}.

You substituted the plasma and urinary inulin concentrations accurately into the formula.

You calculated the arithmetic evaluation accurately according to the numbers you plugged in.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Multiplied instead of divided when calculating flow rate

You multiplied the collected urine volume by the duration of collection instead of dividing volume by time.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the rate calculation as a product rather than a ratio, overlooking dimensional analysis (where mL/min=mLmin\text{mL/min} = \frac{\text{mL}}{\text{min}}, not mL×min\text{mL} \times \text{min}) and missing the physiological sanity check that a normal adult GFRGFR is around 90–120 mL/min90\text{--}120\text{ mL/min}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Unit Dimensional Analysis
  • A rate expressed as volume per unit time always requires dividing total volume by total elapsed time: V=VolumeΔtV = \frac{\text{Volume}}{\Delta t}.

  • Check the units of your calculation: mL×min=mL⋅min\text{mL} \times \text{min} = \text{mL}\cdot\text{min}, whereas mLmin=mL/min\frac{\text{mL}}{\text{min}} = \text{mL/min}.

Physiological Reference Range Check
  • A resting adult glomerular filtration rate typically falls within 90–120 mL/min90\text{--}120\text{ mL/min} (about 180 L/day180\text{ L/day}).

  • If your calculated GFRGFR is on the order of millions of milliliters per minute, pause immediately to verify your rate terms and units.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Calculate the urine flow rate by dividing volume by time: V=180 mL120 min=1.5 mL/minV = \frac{180\text{ mL}}{120\text{ min}} = 1.5\text{ mL/min}.

  2. Substitute U=95.0 mg/mLU = 95.0\text{ mg/mL}, V=1.5 mL/minV = 1.5\text{ mL/min}, and P=1.25 mg/mLP = 1.25\text{ mg/mL} into the clearance formula: GFR=95.0 mg/mL×1.5 mL/min1.25 mg/mLGFR = \frac{95.0\text{ mg/mL} \times 1.5\text{ mL/min}}{1.25\text{ mg/mL}}.

  3. Evaluate the numerator to find the inulin excretion rate: 95.0×1.5=142.5 mg/min95.0 \times 1.5 = 142.5\text{ mg/min}.

  4. Divide by the plasma concentration: GFR=142.51.25=114 mL/minGFR = \frac{142.5}{1.25} = 114\text{ mL/min}.

Final answer

GFR=114 mL/minGFR = 114\text{ mL/min}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice converting total collection volumes over different time intervals (e.g., hours or 24-hour collections) into mL/min\text{mL/min}.

  • Always write out the physical units at each intermediate step to ensure they cancel out properly.

Lock it in

Similar question

01

A patient undergoes a creatinine clearance test. Over a 4-hour4\text{-hour} collection period, total urine volume is 240 mL240\text{ mL}. Urine creatinine concentration is 1.2 mg/mL1.2\text{ mg/mL} and serum creatinine is 0.012 mg/mL0.012\text{ mg/mL}. Calculate the creatinine clearance in mL/min\text{mL/min}.

Answer

First, find collection time in minutes: 4 h×60=240 min4\text{ h} \times 60 = 240\text{ min}. Urine flow rate V=240 mL240 min=1.0 mL/minV = \frac{240\text{ mL}}{240\text{ min}} = 1.0\text{ mL/min}. Then, CCr=U×VP=1.2 mg/mL×1.0 mL/min0.012 mg/mL=100 mL/minC_{\text{Cr}} = \frac{U \times V}{P} = \frac{1.2\text{ mg/mL} \times 1.0\text{ mL/min}}{0.012\text{ mg/mL}} = 100\text{ mL/min}.

02

In a renal physiology laboratory, inulin clearance is measured to determine GFR. Plasma inulin is maintained at 2.0 mg/mL2.0\text{ mg/mL}. During a 90-minute90\text{-minute} clearance period, 135 mL135\text{ mL} of urine is collected with an inulin concentration of 140 mg/mL140\text{ mg/mL}. Calculate the patient's GFR in mL/min\text{mL/min} and state whether it falls within the normal resting range (90–120 mL/min90\text{--}120\text{ mL/min}).

Answer

First, calculate urine flow rate: V=135 mL90 min=1.5 mL/minV = \frac{135\text{ mL}}{90\text{ min}} = 1.5\text{ mL/min}. Next, calculate GFR: GFR=U×VP=140 mg/mL×1.5 mL/min2.0 mg/mL=105 mL/minGFR = \frac{U \times V}{P} = \frac{140\text{ mg/mL} \times 1.5\text{ mL/min}}{2.0\text{ mg/mL}} = 105\text{ mL/min}. Yes, 105 mL/min105\text{ mL/min} falls within the normal resting adult range.

03

A patient with suspected chronic kidney disease completes a 24-hour24\text{-hour} urine collection yielding 2160 mL2160\text{ mL} of urine with a urea concentration of 8.0 mg/mL8.0\text{ mg/mL}. Blood urea nitrogen (BUN) is 0.4 mg/mL0.4\text{ mg/mL}. Calculate the renal clearance of urea in mL/min\text{mL/min}. If inulin clearance in this patient is 90 mL/min90\text{ mL/min}, what percentage of filtered urea was reabsorbed?

Answer

First, find collection time: 24 h×60=1440 min24\text{ h} \times 60 = 1440\text{ min}. Urine flow rate: V=2160 mL1440 min=1.5 mL/minV = \frac{2160\text{ mL}}{1440\text{ min}} = 1.5\text{ mL/min}. Urea clearance: Curea=8.0 mg/mL×1.5 mL/min0.4 mg/mL=30 mL/minC_{\text{urea}} = \frac{8.0\text{ mg/mL} \times 1.5\text{ mL/min}}{0.4\text{ mg/mL}} = 30\text{ mL/min}. Percentage reabsorbed: (1−CureaGFR)×100%=(1−3090)×100%=66.7%\left(1 - \frac{C_{\text{urea}}}{GFR}\right) \times 100\% = \left(1 - \frac{30}{90}\right) \times 100\% = 66.7\%.

Loading workspace…