Resources
An invertebrate physiology lab measures the cross-sectional dimensions of three flatworms () to evaluate respiratory surface scaling. For flat passive diffusion of dissolved through tissue without specialized respiratory gills or a circulatory coelom, the maximum effective diffusion half-thickness from external water to core tissues cannot exceed . Specimen measurements are recorded as follows: Specimen 1 has a dorsal-ventral thickness of ; Specimen 2 has a thickness of ; Specimen 3 has a thickness of . (a) Convert each thickness , , and into uniform SI millimeters () and micrometers (). (b) Assuming oxygen diffuses symmetrically from both the dorsal and ventral surfaces such that the maximum internal diffusion distance to the innermost tissue is , calculate the core diffusion distance for each specimen in micrometers. (c) Determine which specimen(s), if any, exceed and explain why the acoelomate body plan strictly constrains total body thickness.
Answer and steps
Final answer
(a) ; ; ; (b) For Specimen 1: ; for Specimen 2: ; for Specimen 3: ; (c) Specimen 2 exceeds (), meaning its innermost cells cannot receive adequate via simple passive diffusion. The acoelomate plan lacks a convective, fluid-filled coelomic cavity or internal vascular bulk-transport system, requiring every metabolizing cell to sit within the physical diffusion limit () of the external environment.
Steps
Part (a): Unit Conversions for Total Thickness
To compare the specimens directly, convert all measurements to millimeters () and micrometers ():
- Specimen 1:
- Specimen 2:
- Specimen 3:
Part (b): Calculating Maximum Diffusion Distance to Core Tissue
Because dissolved oxygen () diffuses into the organism across both the top (dorsal) and bottom (ventral) body walls, the farthest any interior cell can be from a respiratory surface is halfway through the body:
- Specimen 1:
- Specimen 2:
- Specimen 3:
Part (c): Evaluation and Evolutionary Significance of the Acoelomate Body Plan
-
Comparison with Critical Threshold ():
- Specimen 1: (viable)
- Specimen 2: (exceeds threshold)
- Specimen 3: (viable)
Specimen 2 exceeds the critical diffusion distance. At a half-thickness of , the rate of passive diffusion through solid cellular tissue is too slow to meet the metabolic oxygen demand of the deepest core cells, resulting in central hypoxia or necrosis.
-
Morphological Constraint of the Acoelomate Plan:
- Flatworms (phylum Platyhelminthes) are acoelomates; their mesoderm forms a dense, solid tissue layer (parenchyma/mesenchyme) with no internal fluid-filled cavity (coelom or pseudocoelom) and no specialized cardiovascular bulk-transport network.
- Without circulating fluids to transport gases convectively across large distances, the organism relies solely on passive diffusion across its external body wall. Because the time required for diffusion scales with the square of distance (), gas exchange becomes inefficient over distances greater than a few hundred micrometers.
- Consequently, flatworms are morphologically restricted to a dorsoventrally flattened body plan, ensuring that every living cell remains within the critical diffusion limit of the surrounding aqueous environment.
Typical errors
01 The student forgets to divide body thickness by 2 because they evaluate full total thickness h directly against the maximum diffusion threshold d_crit.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
; ;
Because oxygen diffuses simultaneously from both the dorsal and ventral body surfaces, the maximum distance to the innermost core cells is only half the total body thickness ().
- Step 3
Specimens 1, 2, and 3 all exceed because , , and are all greater than .
CorrectOnly Specimen 2 exceeds because , whereas and .
Your comparison followed logically from your unhalved distances, but using the correct half-thickness values shows that only Specimen 2 exceeds .
- Step 4
Acoelomates lack internal circulatory vessels, so internal cells must rely entirely on direct passive diffusion through tissue.
WHAT YOU DID WELL
Compliments from Your TeacherYou completed all metric unit conversions between centimeters, millimeters, and micrometers without error.
You explained clearly how the lack of a circulatory transport system in acoelomates makes diffusion distance the key constraint on tissue survival.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou equated the internal diffusion distance directly to total body thickness instead of dividing by .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisOverlooking that gas exchange occurs across both opposing surfaces (dorsal and ventral) simultaneously, which halves the maximum distance that oxygen must travel to reach the deepest interior cell.
REASONING PATH
Your ACEpath teacher’s suggested approach- Identify Diffusion Symmetry
When an organism exchanges gases across two opposing outer surfaces into a solid core, the maximum internal diffusion distance is .
Always verify whether diffusion enters from one boundary () or symmetrically from both sides () before evaluating critical thresholds.
CORRECTED PATH
ACEpath Teacher's DemonstrationDivide each total thickness by : , , and .
Compare each value of to : (viable), (exceeds threshold), and (viable).
Only Specimen 2 exceeds ().
02 The student misapplies the metric conversion factor between centimeters and millimeters by dividing by 10 instead of multiplying, resulting in an understated thickness for Specimen 1.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
, ,
Correct, ,
You converted and accurately. However, for Specimen 1, converting from centimeters to millimeters requires multiplying by (), giving , rather than dividing by .
- Step 2
, ,
Correct, ,
You correctly applied the half-thickness formula across all three specimens. The calculations for and are fully correct, while inherits the conversion error from Part (a).
- Step 3
Only Specimen 2 exceeds because , while and do not. Acoelomate flatworms have no internal coelomic circulatory fluid to move oxygen, so all core tissues must depend entirely on external surface diffusion.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly identified the physiological relationship for bidirectional planar diffusion.
You performed correct unit conversions for millimeters to micrometers on Specimens 2 and 3.
You provided a solid biological rationale connecting the acoelomate tissue architecture to passive diffusion constraints.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou divided by instead of multiplying by when converting into millimeters.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisConfusing the direction of metric scaling between centimeters and millimeters: going from a larger unit () to a smaller unit () increases the numerical value by a factor of .
REASONING PATH
Your ACEpath teacher’s suggested approach- Unit Scaling Sanity Check
When moving from centimeters to millimeters, multiply by ; verify that a millimeter value is always numerically larger than its centimeter equivalent.
CORRECTED PATH
ACEpath Teacher's DemonstrationConvert to millimeters: .
Convert to micrometers: .
Recalculate core diffusion distance : .
(a) ; ; ; (b) , , ; (c) Only Specimen 2 exceeds because acoelomates lack circulatory bulk transport.
Lock it in
Why is the maximum diffusion distance to the innermost cell of a flatworm equal to rather than total thickness ?
Dissolved enters through both dorsal and ventral surfaces simultaneously, meeting at the center ().
Similar question
A marine flatworm has a measured dorsal-ventral thickness of . Assuming symmetrical diffusion from both surfaces and a critical diffusion threshold of , determine the maximum diffusion distance to core cells in micrometers and state whether this flatworm's core tissue is viable.
Answer
; viable. Key step: , so core diffusion distance .
A parasitic trematode living in bile ducts is limited by a hypoxia threshold of . If oxygen can diffuse only through its dorsal tegument because its ventral surface is tightly pressed against host tissue, calculate the maximum allowable total body thickness in millimeters.
Answer
. Key step: With one-sided diffusion, the deepest tissue is at distance , so .
An ancestral cylindrical worm of radius lacks circulatory fluids and has . (1) Calculate the radial depth to its center and explain why it experiences central hypoxia. (2) If it evolves a dorsoventrally flattened ribbon shape with equal cross-sectional area and a uniform thickness of , show whether every cell now satisfies the diffusion limit.
Answer
(1) Central depth equals radius , causing central hypoxia. (2) Yes, viable. Key step: For the flattened ribbon with bilateral diffusion, .