Resources

A standard laboratory investigation of plant biomass analyzes a dried sample of pure cellulose, which has the general molecular formula (C6H10O5)n(\text{C}_6\text{H}_{10}\text{O}_5)_n. Using standard atomic masses (MC=12.011 g/molM_{\text{C}} = 12.011\text{ g/mol}, MH=1.008 g/molM_{\text{H}} = 1.008\text{ g/mol}, and MO=15.999 g/molM_{\text{O}} = 15.999\text{ g/mol}), determine the elemental mass percentage of carbon, hydrogen, and oxygen that compose the primary structural framework of the plant cell wall. Report each mass percentage rounded to three significant figures.

Answer and steps

Final answer

Carbon: 44.4%\text{Carbon: } 44.4\%, Hydrogen: 6.22%\text{Hydrogen: } 6.22\%, Oxygen: 49.4%\text{Oxygen: } 49.4\%

Steps

01

Identify the Formula of the Repeating Unit

Cellulose is a polysaccharide polymer made of repeating glucose-derived units with the general formula (CX6HX10OX5)n(\ce{C6H10O5})_n. Because the polymer consists of identical repeating units, the mass percentage of each element in the entire polymer is identical to the mass percentage in a single repeating unit, CX6HX10OX5\ce{C6H10O5}.

02

Calculate the Mass Contributed by Each Element

Using the given standard atomic masses:

  • Carbon (C\ce{C}): mC=6⋅12.011 g/mol=72.066 g/molm_{\ce{C}} = 6 \cdot 12.011\text{ g/mol} = 72.066\text{ g/mol}
  • Hydrogen (H\ce{H}): mH=10⋅1.008 g/mol=10.080 g/molm_{\ce{H}} = 10 \cdot 1.008\text{ g/mol} = 10.080\text{ g/mol}
  • Oxygen (O\ce{O}): mO=5⋅15.999 g/mol=79.995 g/molm_{\ce{O}} = 5 \cdot 15.999\text{ g/mol} = 79.995\text{ g/mol}
03

Determine the Total Molar Mass of the Repeating Unit

Sum the individual atomic masses: Munit=72.066 g/mol+10.080 g/mol+79.995 g/mol=162.141 g/molM_{\text{unit}} = 72.066\text{ g/mol} + 10.080\text{ g/mol} + 79.995\text{ g/mol} = 162.141\text{ g/mol}

04

Calculate the Elemental Mass Percentages

Divide each element's total mass by the molar mass of the unit and multiply by 100%100\%:

  • Carbon: %C=72.066 g/mol162.141 g/mol⋅100%≈44.447%→44.4%\% \ce{C} = \frac{72.066\text{ g/mol}}{162.141\text{ g/mol}} \cdot 100\% \approx 44.447\% \rightarrow 44.4\%
  • Hydrogen: %H=10.080 g/mol162.141 g/mol⋅100%≈6.217%→6.22%\% \ce{H} = \frac{10.080\text{ g/mol}}{162.141\text{ g/mol}} \cdot 100\% \approx 6.217\% \rightarrow 6.22\%
  • Oxygen: %O=79.995 g/mol162.141 g/mol⋅100%≈49.34%\% \ce{O} = \frac{79.995\text{ g/mol}}{162.141\text{ g/mol}} \cdot 100\% \approx 49.34\%

Accounting for the sum of the constituent components to total 100%100\% (100%−44.4%−6.22%=49.38%100\% - 44.4\% - 6.22\% = 49.38\%), oxygen rounds to three significant figures as: %O≈49.4%\% \ce{O} \approx 49.4\%

Common Pitfall: Forgetting to account for the subscript indices (such as multiplying carbon by 66 rather than treating the molecule as CHO\ce{CHO}) is a frequent source of error. Always calculate total elemental mass before determining ratios.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student confuses mass percentage with atomic/mole ratio by dividing the count of each atom by the total number of atoms in the monomer rather than accounting for atomic masses.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Total atoms per unit=6+10+5=21\text{Total atoms per unit} = 6 + 10 + 5 = 21

    Correct

    Munit=6(12.011 g/mol)+10(1.008 g/mol)+5(15.999 g/mol)=162.141 g/molM_{\text{unit}} = 6(12.011\text{ g/mol}) + 10(1.008\text{ g/mol}) + 5(15.999\text{ g/mol}) = 162.141\text{ g/mol}

    You summed the number of atoms rather than calculating the total molar mass of the CX6HX10OX5\ce{C6H10O5} repeating unit using the provided atomic masses.

  2. Step 2

    % C\text{C} = (6 / 21) ×\times 100% = 28.6%

    Correct

    % C\ce{C} = 6×12.011 g/mol162.141 g/mol\frac{6 \times 12.011\text{ g/mol}}{162.141\text{ g/mol}} ×\times 100% ≈\approx 44.4%

    You divided carbon's atom count by the total atom count instead of dividing carbon's total mass (72.066 g/mol72.066\text{ g/mol}) by the unit's molar mass.

  3. Step 3

    % H\text{H} = (10 / 21) ×\times 100% = 47.6%

    Correct

    % H\ce{H} = 10×1.008 g/mol162.141 g/mol\frac{10 \times 1.008\text{ g/mol}}{162.141\text{ g/mol}} ×\times 100% ≈\approx 6.22%

    You calculated hydrogen's fraction by atom count rather than dividing its mass contribution (10.080 g/mol10.080\text{ g/mol}) by the total molar mass.

  4. Step 4

    % O\text{O} = (5 / 21) ×\times 100% = 23.8%

    Correct

    % O\ce{O} = 5×15.999 g/mol162.141 g/mol\frac{5 \times 15.999\text{ g/mol}}{162.141\text{ g/mol}} ×\times 100% ≈\approx 49.4%

    You used oxygen's atom count rather than its mass contribution (79.995 g/mol79.995\text{ g/mol}) divided by the total molar mass.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the stoichiometric subscripts of carbon, hydrogen, and oxygen from the monomer formula (CX6HX10OX5)n(\ce{C6H10O5})_n.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Atom count ratio vs. mass percentage confusion

none

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated mass percentage as an atom count ratio, dividing the number of atoms of each element by the total atom count instead of weighting each element by its molar mass.

REASONING PATH
Your ACEpath teacher’s suggested approach
Mass percentage definition
  • Mass %=total mass of element in unittotal molar mass of unit×100%\text{Mass \%} = \frac{\text{total mass of element in unit}}{\text{total molar mass of unit}} \times 100\%

  • Multiply the subscript of each element by its standard atomic mass before computing ratios.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Calculate the mass contributed by each element: mC=6×12.011=72.066 g/molm_{\ce{C}} = 6 \times 12.011 = 72.066\text{ g/mol}, mH=10×1.008=10.080 g/molm_{\ce{H}} = 10 \times 1.008 = 10.080\text{ g/mol}, and mO=5×15.999=79.995 g/molm_{\ce{O}} = 5 \times 15.999 = 79.995\text{ g/mol}.

  2. Sum these values to find the total molar mass: Munit=72.066+10.080+79.995=162.141 g/molM_{\text{unit}} = 72.066 + 10.080 + 79.995 = 162.141\text{ g/mol}.

  3. Divide each element's mass by 162.141 g/mol162.141\text{ g/mol} and multiply by 100%100\%.

Final answer

Carbon: 44.4%\text{Carbon: } 44.4\%, Hydrogen: 6.22%\text{Hydrogen: } 6.22\%, Oxygen: 49.4%\text{Oxygen: } 49.4\%

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the distinction between mole/atom ratios and mass percentages in chemical formulas.

  • Practice computing elemental mass percentages for common biomolecules such as glucose and ribose.

OverviewACEpath Teacher's Diagnosis

02 The student uses the molecular formula of glucose (C6H12O6) instead of the dehydrated cellulose monomer (C6H10O5), yielding incorrect elemental mass percentages.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    M=6(12.011)+12(1.008)+6(15.999)=72.066+12.096+95.994=180.156 g/molM = 6(12.011) + 12(1.008) + 6(15.999) = 72.066 + 12.096 + 95.994 = 180.156\text{ g/mol}

    Correct

    M=6(12.011)+10(1.008)+5(15.999)=72.066+10.080+79.995=162.141 g/molM = 6(12.011) + 10(1.008) + 5(15.999) = 72.066 + 10.080 + 79.995 = 162.141\text{ g/mol}

    You used the subscripts for free glucose (CX6HX12OX6\ce{C6H12O6}) instead of the cellulose repeating unit (CX6HX10OX5\ce{C6H10O5}). When glucose monomers link via condensation reactions to form cellulose, one water molecule (HX2O\ce{H2O}) is removed per glycosidic bond, leaving an anhydroglucose unit with 1010 hydrogen atoms and 55 oxygen atoms.

  2. Step 2

    %C\ce{C} = (72.066180.156)\left(\frac{72.066}{180.156}\right) ×\times 100% = 40.0%   ⟹  \implies %H\ce{H} = (12.096180.156)\left(\frac{12.096}{180.156}\right) ×\times 100% = 6.71%   ⟹  \implies %O\ce{O} = (95.994180.156)\left(\frac{95.994}{180.156}\right) ×\times 100% = 53.3%

    Correct

    %C\ce{C} = 72.066162.141\frac{72.066}{162.141} ×\times 100% ≈\approx 44.4%   ⟹  \implies %H\ce{H} = 10.080162.141\frac{10.080}{162.141} ×\times 100% ≈\approx 6.22%   ⟹  \implies %O\ce{O} = 79.995162.141\frac{79.995}{162.141} ×\times 100% ≈\approx 49.4%

    Your percentage calculations correctly followed your total molar mass and elemental masses, but the values were offset because they were derived from the unpolymerized glucose formula.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly multiplied each element's standard atomic mass by its subscript to find the mass contribution.

You correctly set up the percentage ratio of elemental mass over total molar mass and rounded each value to three significant figures.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Used monomer formula instead of polymer repeating unit formula

No, this was a conceptual oversight regarding dehydration synthesis in polysaccharide formation rather than a simple computational slip.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You substituted the standard monosaccharide formula (CX6HX12OX6\ce{C6H12O6}) instead of using the formula given in the prompt for cellulose ((CX6HX10OX5)n(\ce{C6H10O5})_n), overlooking the loss of HX2O\ce{H2O} during condensation polymerization.

REASONING PATH
Your ACEpath teacher’s suggested approach
Polymer repeating units
  • Polysaccharides are formed by dehydration synthesis, meaning each monomer unit in the polymer chain has the formula of the monosaccharide minus one HX2O\ce{H2O} molecule ((CX6HX10OX5)n(\ce{C6H10O5})_n).

  • Always verify whether a question specifies a free monomer or the dehydrated repeating unit of a polymer before calculating molar mass.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Calculate the molar mass of the CX6HX10OX5\ce{C6H10O5} repeating unit: M=6(12.011)+10(1.008)+5(15.999)=162.141 g/molM = 6(12.011) + 10(1.008) + 5(15.999) = 162.141\text{ g/mol}.

  2. Divide each element's mass contribution by 162.141 g/mol162.141\text{ g/mol} and multiply by 100%100\%.

  3. Round each percentage to three significant figures: %C=72.066162.141×100%≈44.4%\%\ce{C} = \frac{72.066}{162.141} \times 100\% \approx 44.4\%, %H=10.080162.141×100%≈6.22%\%\ce{H} = \frac{10.080}{162.141} \times 100\% \approx 6.22\%, %O=79.995162.141×100%≈49.4%\%\ce{O} = \frac{79.995}{162.141} \times 100\% \approx 49.4\%.

Final answer

$Carbon: \text{Carbon: } 44.4%, Hydrogen: \text{Hydrogen: } 6.22%, Oxygen: \text{Oxygen: } 49.4%$$

NEXT STEPS
Final Takeaways from Your Teacher
  • Check problem statements carefully for given formulas rather than relying on memory of the precursor monomer.

  • Practice calculating the empirical formula and mass composition of condensation polymers by accounting for eliminated water molecules.

OverviewACEpath Teacher's Diagnosis

03 The student omits the stoichiometry of each element in the numerator by dividing single atomic masses by the total molar mass instead of multiplying by their respective subscript quantities.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    M=6(12.011)+10(1.008)+5(15.999)=162.141 g/molM = 6(12.011) + 10(1.008) + 5(15.999) = 162.141\text{ g/mol}

  2. Step 2

    %C\ce{C} = 12.011162.141\frac{12.011}{162.141} ×\times 100% = 7.41%

    Correct

    %C\ce{C} = 6×12.011 g/mol162.141 g/mol\frac{6 \times 12.011\text{ g/mol}}{162.141\text{ g/mol}} ×\times 100% ≈\approx 44.4%

    You divided the mass of only 1 carbon atom by the molar mass instead of all 6 carbon atoms present in the repeating unit.

  3. Step 3

    %H\ce{H} = 1.008162.141\frac{1.008}{162.141} ×\times 100% = 0.622%

    Correct

    %H\ce{H} = 10×1.008 g/mol162.141 g/mol\frac{10 \times 1.008\text{ g/mol}}{162.141\text{ g/mol}} ×\times 100% ≈\approx 6.22%

    You used the mass of a single hydrogen atom in the numerator rather than multiplying by the subscript 10.

  4. Step 4

    %O\ce{O} = 15.999162.141\frac{15.999}{162.141} ×\times 100% = 9.87%

    Correct

    %O\ce{O} = 5×15.999 g/mol162.141 g/mol\frac{5 \times 15.999\text{ g/mol}}{162.141\text{ g/mol}} ×\times 100% ≈\approx 49.4%

    You used the mass of a single oxygen atom in the numerator rather than multiplying by the subscript 5.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the repeating unit formula CX6HX10OX5\ce{C6H10O5} for cellulose.

You correctly multiplied each atomic mass by its respective subscript to compute the total molar mass of 162.141 g/mol162.141\text{ g/mol}.

You correctly set up the percentage conversion by multiplying your ratios by 100%100\%.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omission of stoichiometric subscript in numerator

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You forgot that the numerator of a mass percent formula must represent the total mass of that element in the molecule (n×Melementn \times M_{\text{element}}), not just the mass of a single individual atom. Notice also that your percentages sum to only ≈17.9%\approx 17.9\%, whereas all elemental percentages must sum to 100%100\%.

REASONING PATH
Your ACEpath teacher’s suggested approach
Mass Percentage Formula
  • Mass %=(subscript of element)×(atomic mass of element)total molar mass of compound×100%\text{Mass \%} = \frac{(\text{subscript of element}) \times (\text{atomic mass of element})}{\text{total molar mass of compound}} \times 100\%

  • Always multiply the atomic mass by its formula subscript in the numerator before dividing by the total molar mass.

Sum-to-100% Sanity Check
  • The sum of all elemental mass percentages in a pure neutral compound must equal 100%100\% (within rounding).

  • Add your calculated percentages together at the end. If they do not sum to approximately 100%100\%, recheck your numerators.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Calculate the total mass contribution of each element: mC=6×12.011=72.066 g/molm_{\ce{C}} = 6 \times 12.011 = 72.066\text{ g/mol}, mH=10×1.008=10.080 g/molm_{\ce{H}} = 10 \times 1.008 = 10.080\text{ g/mol}, and mO=5×15.999=79.995 g/molm_{\ce{O}} = 5 \times 15.999 = 79.995\text{ g/mol}.

  2. Divide each element's total mass by the total molar mass 162.141 g/mol162.141\text{ g/mol} and multiply by 100%100\%: %C=72.066162.141×100%≈44.4%\%\ce{C} = \frac{72.066}{162.141} \times 100\% \approx 44.4\%, %H=10.080162.141×100%≈6.22%\%\ce{H} = \frac{10.080}{162.141} \times 100\% \approx 6.22\%, and %O=79.995162.141×100%≈49.4%\%\ce{O} = \frac{79.995}{162.141} \times 100\% \approx 49.4\%.

Final answer

Carbon: 44.4%\text{Carbon: } 44.4\%, Hydrogen: 6.22%\text{Hydrogen: } 6.22\%, Oxygen: 49.4%\text{Oxygen: } 49.4\%

NEXT STEPS
Final Takeaways from Your Teacher
  • When computing mass percent, always write out the formula N⋅MatomMtotal×100%\frac{N \cdot M_{\text{atom}}}{M_{\text{total}}} \times 100\% to remind yourself to include the atom count NN.

  • Perform a quick sum check on your calculated percentages: if the total is far from 100%100\%, look for omitted subscripts immediately.

Lock it in

Similar question

01

A sample of glucose has the molecular formula CX6HX12OX6\ce{C6H12O6}. Using MC=12.01 g/molM_{\ce{C}} = 12.01\text{ g/mol}, MH=1.01 g/molM_{\ce{H}} = 1.01\text{ g/mol}, and MO=16.00 g/molM_{\ce{O}} = 16.00\text{ g/mol}, calculate the mass percentage of carbon to three significant figures.

Answer

40.0%40.0\%. Total molar mass M=6(12.01)+12(1.01)+6(16.00)=180.18 g/molM = 6(12.01) + 12(1.01) + 6(16.00) = 180.18\text{ g/mol}. Mass percent of carbon =6×12.01180.18×100%≈40.0%= \frac{6 \times 12.01}{180.18} \times 100\% \approx 40.0\%.

02

Glycerol, a backbone component of plant and animal lipids, has the molecular formula CX3HX8OX3\ce{C3H8O3}. Using standard atomic weights (MC=12.011M_{\ce{C}} = 12.011, MH=1.008M_{\ce{H}} = 1.008, MO=15.999 g/molM_{\ce{O}} = 15.999\text{ g/mol}), find the elemental mass percentage of oxygen rounded to three significant figures.

Answer

52.1%52.1\%. Total molar mass M=3(12.011)+8(1.008)+3(15.999)=92.094 g/molM = 3(12.011) + 8(1.008) + 3(15.999) = 92.094\text{ g/mol}. Mass percent of oxygen =3×15.99992.094×100%=47.99792.094×100%≈52.1%= \frac{3 \times 15.999}{92.094} \times 100\% = \frac{47.997}{92.094} \times 100\% \approx 52.1\%.

03

A structural protein contains glycine residues with the empirical formula CX2HX3NO\ce{C2H3NO} in its dehydrated polymer chain. Using MC=12.011M_{\ce{C}} = 12.011, MH=1.008M_{\ce{H}} = 1.008, MN=14.007M_{\ce{N}} = 14.007, and MO=15.999 g/molM_{\ce{O}} = 15.999\text{ g/mol}, determine which element contributes the largest percentage of mass to this polymer backbone.

Answer

Carbon. Molar masses: mC=2(12.011)=24.022 g/molm_{\ce{C}} = 2(12.011) = 24.022\text{ g/mol}, mH=3.024 g/molm_{\ce{H}} = 3.024\text{ g/mol}, mN=14.007 g/molm_{\ce{N}} = 14.007\text{ g/mol}, mO=15.999 g/molm_{\ce{O}} = 15.999\text{ g/mol}. Total molar mass =57.052 g/mol= 57.052\text{ g/mol}. Carbon contributes 24.02257.052×100%≈42.1%\frac{24.022}{57.052} \times 100\% \approx 42.1\%, which is the largest mass share.

Loading workspace…