Resources

An agricultural watershed spanning 4.50×102 hectares4.50\times 10^2\text{ hectares} contains 3.20×1053.20\times 10^5 individual corn plants (Zea mays), an insect assemblage of 1818 distinct taxonomic families, and an underlying aquifer with a nitrate concentration of 45.0 mg/L45.0\text{ mg/L} (extNO3− ext{NO}_3^-) undergoing denitrification at a rate of 2.50×10−2 kg N⋅ha−1⋅day−12.50\times 10^{-2}\text{ kg N}\cdot\text{ha}^{-1}\cdot\text{day}^{-1}. Convert the corn plant abundance to population density in units of plants/m2\text{plants/m}^2 (1 ha=104 m21\text{ ha} = 10^4\text{ m}^2), and identify the level of organization that encompasses both the corn population density and the chemical denitrification flux rate.

Answer and steps

Final answer

Population density: 0.0711 plants/m20.0711\text{ plants/m}^2; Level of organization: Ecosystem.

Steps

01

Convert the Total Area to Square Meters

The watershed area is given in hectares (ha\text{ha}). Using the conversion factor 1 ha=104 m21\text{ ha} = 10^4\text{ m}^2:

Area=4.50×102 ha×104 m2/ha=4.50×106 m2\text{Area} = 4.50 \times 10^2\text{ ha} \times 10^4\text{ m}^2/\text{ha} = 4.50 \times 10^6\text{ m}^2


02

Calculate the Corn Population Density

Population density represents the number of individuals of a single species per unit area:

Population Density=Total IndividualsTotal Area\text{Population Density} = \frac{\text{Total Individuals}}{\text{Total Area}}

Substitute the given values:

Population Density=3.20×105 plants4.50×106 m2=3.2045.0≈0.0711 plants/m2\text{Population Density} = \frac{3.20 \times 10^5\text{ plants}}{4.50 \times 10^6\text{ m}^2} = \frac{3.20}{45.0} \approx 0.0711\text{ plants/m}^2

(Rounding to three significant figures gives 0.0711 plants/m20.0711\text{ plants/m}^2.)


03

Determine the Level of Ecological Organization

Recall the hierarchical levels of ecological organization:

  1. Organism (Individual): A single living entity (e.g., one corn plant).
  2. Population: A group of individuals of the same species living in a defined area (e.g., the 3.20×1053.20 \times 10^5 corn plants).
  3. Community: All the interacting populations of different species inhabiting an area (e.g., corn plants plus the 1818 insect families).
  4. Ecosystem: A biological community together with its physical, non-living (abiotic) environment and their interactions, such as energy flow and nutrient/chemical cycling.
  5. Biosphere: The global sum of all ecosystems.

Here, the scenario includes:

  • Biotic component: The corn population (Zea mays).
  • Abiotic / Biogeochemical component: The aquifer's nitrate concentration and the chemical flux rate of denitrification (NOX3X−\ce{NO3-} conversion).

Because the scale integrates living organisms (biotic) interacting with physical and chemical nutrient cycling processes (abiotic), the level of organization that encompasses both features is the ecosystem.

Common Pitfall: Confusing a community with an ecosystem. A community includes only the living (biotic) organisms of different species. Once abiotic factors—such as soil chemistry, groundwater nitrate, or chemical transformation rates—are integrated with biotic elements, the system is classified as an ecosystem.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student divides the area by the number of plants rather than dividing individuals by area, yielding the average area per plant instead of population density.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Area=4.50×102 ha=4.50×106 m2\text{Area} = 4.50 \times 10^2\text{ ha} = 4.50 \times 10^6\text{ m}^2

  2. Step 2

    Density=4.50×106 m23.20×105 plants=14.1 m2/plant\text{Density} = \frac{4.50 \times 10^6\text{ m}^2}{3.20 \times 10^5\text{ plants}} = 14.1\text{ m}^2/\text{plant}

    Correct

    Population Density=3.20×105 plants4.50×106 m2≈0.0711 plants/m2\text{Population Density} = \frac{3.20 \times 10^5\text{ plants}}{4.50 \times 10^6\text{ m}^2} \approx 0.0711\text{ plants/m}^2

    You inverted the formula by placing area in the numerator. Population density is defined as the number of individuals per unit area (plants/m2\text{plants/m}^2), whereas your calculation gave the average ground area per plant (m2/plant\text{m}^2/\text{plant}).

  3. Step 3

    Ecosystem\text{Ecosystem}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly converted the watershed area from hectares to square meters.

You correctly identified the ecosystem as the level of biological organization encompassing both biotic populations and abiotic chemical cycling.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverted Density Ratio

No, this stems from setting up the ratio of area to individuals rather than individuals to area.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You calculated mean ground area per individual (extarea/extindividuals ext{area} / ext{individuals}) instead of population density (extindividuals/extarea ext{individuals} / ext{area}). Checking the requested unit (extplants/m2 ext{plants/m}^2) reveals that the count of plants must be in the numerator.

REASONING PATH
Your ACEpath teacher’s suggested approach
Unit and Ratio Alignment
  • Population Density=Number of IndividualsTotal Area\text{Population Density} = \frac{\text{Number of Individuals}}{\text{Total Area}} with units of individuals/unit area\text{individuals}/\text{unit area}.

  • Always inspect the target units (here, plants/m2\text{plants/m}^2) before setting up your fraction: the unit before the slash belongs in the numerator, and the unit after belongs in the denominator.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Population Density=Total PlantsTotal Area (m2)=3.20×105 plants4.50×106 m2\text{Population Density} = \frac{\text{Total Plants}}{\text{Total Area (m}^2\text{)}} = \frac{3.20 \times 10^5\text{ plants}}{4.50 \times 10^6\text{ m}^2}

  2. Population Density=3.2045.0≈0.0711 plants/m2\text{Population Density} = \frac{3.20}{45.0} \approx 0.0711\text{ plants/m}^2

Final answer

Population density: 0.0711 plants/m20.0711\text{ plants/m}^2; Level of organization: Ecosystem

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the dimensional units whenever calculating density or rate to ensure the intended quantity is in the numerator.

  • Practice distinguishing between population density (individuals per area) and mean space per individual (area per individual).

OverviewACEpath Teacher's Diagnosis

02 The student forgets to convert hectares to square meters, calculating density in units of plants/ha rather than plants/m².

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Density=3.20×105 plants4.50×102 ha=711 plants/m2\text{Density} = \frac{3.20 \times 10^5\text{ plants}}{4.50 \times 10^2\text{ ha}} = 711\text{ plants/m}^2

    Correct

    Density=3.20×105 plants4.50×102 ha×104 m2/ha=0.0711 plants/m2\text{Density} = \frac{3.20 \times 10^5\text{ plants}}{4.50 \times 10^2\text{ ha} \times 10^4\text{ m}^2/\text{ha}} = 0.0711\text{ plants/m}^2

    You divided the total number of plants directly by the area in hectares, which gives 711 plants/ha711\text{ plants/ha}, but labeled the unit as plants/m2\text{plants/m}^2. Since 1 ha=104 m21\text{ ha} = 10^4\text{ m}^2, the total area is 4.50×106 m24.50 \times 10^6\text{ m}^2, giving a density of 0.0711 plants/m20.0711\text{ plants/m}^2.

  2. Step 2

    Ecosystem\text{Ecosystem}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the definition of population density as total individuals divided by area.

You correctly identified the ecosystem level of organization for interacting biotic and abiotic components.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omitted unit conversion factor

You carried out the division accurately for plants per hectare, but you wrote the target unit without applying the hectare-to-square-meter conversion factor.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Skipping explicit dimensional analysis during the substitution step allowed an unconverted area unit (ha\text{ha}) to be treated as square meters (m2\text{m}^2).

REASONING PATH
Your ACEpath teacher’s suggested approach
Match Target Units
  • Every given unit must match the requested unit before executing numerical division.

  • Multiply hectares by 104 m2/ha10^4\text{ m}^2/\text{ha} so that ha\text{ha} cancels out and leaves m2\text{m}^2 in the denominator.

Sanity Check Scale
  • Because 1 m21\text{ m}^2 is much smaller than 1 ha1\text{ ha}, population density in plants/m2\text{plants/m}^2 must be 10410^4 times smaller than density in plants/ha\text{plants/ha}.

  • Verify whether having hundreds of large crop plants crammed into a single square meter is biologically plausible.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert the denominator to square meters: 4.50×102 ha×104 m2/ha=4.50×106 m24.50 \times 10^2\text{ ha} \times 10^4\text{ m}^2/\text{ha} = 4.50 \times 10^6\text{ m}^2.

  2. Divide the plant count by the converted area: 3.20×105 plants4.50×106 m2=3.2045.0≈0.0711 plants/m2\frac{3.20 \times 10^5\text{ plants}}{4.50 \times 10^6\text{ m}^2} = \frac{3.20}{45.0} \approx 0.0711\text{ plants/m}^2.

Final answer

Population density: 0.0711 plants/m20.0711\text{ plants/m}^2; Level of organization: Ecosystem.

NEXT STEPS
Final Takeaways from Your Teacher
  • Write out conversion factors explicitly as fractions so that units cancel visibly in your calculations.

  • Perform a biological reality check on density numbers (e.g., 711 mature corn plants/m2711\text{ mature corn plants/m}^2 would be physically impossible).

OverviewACEpath Teacher's Diagnosis

03 The student identifies the level of organization as community because multiple biological interactions are present, overlooking that chemical nutrient flux is an abiotic component requiring the ecosystem level.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Area=4.50×102×104 m2=4.50×106 m2  ⟹  Density=3.20×105 plants4.50×106 m2=0.0711 plants/m2\text{Area} = 4.50 \times 10^2 \times 10^4\text{ m}^2 = 4.50 \times 10^6\text{ m}^2 \implies \text{Density} = \frac{3.20 \times 10^5\text{ plants}}{4.50 \times 10^6\text{ m}^2} = 0.0711\text{ plants/m}^2

  2. Step 2

    Community\text{Community}

    Correct

    Ecosystem\text{Ecosystem}

    A biological community includes only the living (biotic) populations in an area. Because chemical denitrification and aquifer nitrate concentration represent abiotic and biogeochemical processes interacting with living organisms, the appropriate level of organization is an ecosystem.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly applied the conversion factor between hectares and square meters.

You accurately calculated the population density to three significant figures.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omission of abiotic factors in ecological hierarchy

You chose community after initially considering population, focusing on multiple biological populations while overlooking abiotic nutrient flux.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the biological organisms as the sole determinant of the organization level, overlooking that nutrient cycling and abiotic chemical pools (such as nitrate in groundwater) elevate the system from a community to an ecosystem.

REASONING PATH
Your ACEpath teacher’s suggested approach
Distinguishing Community from Ecosystem
  • A biological community consists strictly of interacting biotic assemblages (multiple species). An ecosystem integrates the biotic community with abiotic chemical and physical pools and fluxes.

  • Check whether the described system includes abiotic components or nutrient cycling (e.g., soil chemistry, water chemistry, gas fluxes). If abiotic interactions are present, classify it as an ecosystem.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the components described: corn plants represent a biotic population, whereas groundwater nitrate and denitrification flux represent abiotic nutrient cycling.

  2. Recall that a biological community consists solely of interacting living populations (biotic factors).

  3. Combine biotic assemblages with physical/chemical fluxes (abiotic factors) to identify the level of organization as an ecosystem.

Final answer

Population density: 0.0711 plants/m20.0711\text{ plants/m}^2; Level of organization: Ecosystem.

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the hierarchy of ecological organization, paying special attention to where abiotic factors first enter the hierarchy.

  • Practice identifying biotic versus abiotic components in environmental science scenarios before selecting between community and ecosystem.

Lock it in

Similar question

01

A grassland reserve covers 2.50×102 ha2.50\times 10^2\text{ ha}. A survey counts 1.25×1041.25\times 10^4 prairie dogs across the reserve. Calculate the population density in prairie dogs/m2\text{prairie dogs/m}^2 (1 ha=104 m21\text{ ha} = 10^4\text{ m}^2).

Answer

0.00500 prairie dogs/m20.00500\text{ prairie dogs/m}^2 (or 5.00×10−3 prairie dogs/m25.00\times 10^{-3}\text{ prairie dogs/m}^2). First convert the area: 2.50×102 ha×104 m2/ha=2.50×106 m22.50\times 10^2\text{ ha}\times 10^4\text{ m}^2/\text{ha} = 2.50\times 10^6\text{ m}^2. Then divide individuals by area: 1.25×104 prairie dogs2.50×106 m2=0.00500 prairie dogs/m2\frac{1.25\times 10^4\text{ prairie dogs}}{2.50\times 10^6\text{ m}^2} = 0.00500\text{ prairie dogs/m}^2.

02

A marine biologist samples a coastal zone of 8.0×103 m28.0\times 10^3\text{ m}^2 and records 6.4×1046.4\times 10^4 mussels, along with a seawater phosphate influx of 12.0 mg P⋅m−2⋅day−112.0\text{ mg P}\cdot\text{m}^{-2}\cdot\text{day}^{-1}. State the mussel population density in mussels/m2\text{mussels/m}^2, the mean area occupied per mussel in m2/mussel\text{m}^2/\text{mussel}, and the ecological level represented by the combined biotic and abiotic data.

Answer

Density: 8.0 mussels/m28.0\text{ mussels/m}^2; Mean area: 0.125 m2/mussel0.125\text{ m}^2/\text{mussel}; Level: Ecosystem. Population density is 6.4×104 mussels8.0×103 m2=8.0 mussels/m2\frac{6.4\times 10^4\text{ mussels}}{8.0\times 10^3\text{ m}^2} = 8.0\text{ mussels/m}^2. Mean area is the reciprocal: 8.0×103 m26.4×104 mussels=0.125 m2/mussel\frac{8.0\times 10^3\text{ m}^2}{6.4\times 10^4\text{ mussels}} = 0.125\text{ m}^2/\text{mussel}. Integrating organisms with abiotic nutrient flux defines an ecosystem.

03

In a wetland measuring 1.50×101 ha1.50\times 10^1\text{ ha}, ecologists record 4.50×1034.50\times 10^3 cattail plants (Typha latifolia), 1212 species of amphibians, and an atmospheric methane emission rate of 3.20×10−3 g CH4⋅m−2⋅day−13.20\times 10^{-3}\text{ g CH}_4\cdot\text{m}^{-2}\cdot\text{day}^{-1}. Determine the cattail population density in plants/m2\text{plants/m}^2, identify which level of organization includes all plant and animal species without the abiotic flux, and identify the level when the methane flux is included.

Answer

Density: 0.0300 plants/m20.0300\text{ plants/m}^2; Living species only: Community; With methane flux: Ecosystem. Area is 1.50×101 ha×104=1.50×105 m21.50\times 10^1\text{ ha}\times 10^4 = 1.50\times 10^5\text{ m}^2. Density is 4.50×103 plants1.50×105 m2=0.0300 plants/m2\frac{4.50\times 10^3\text{ plants}}{1.50\times 10^5\text{ m}^2} = 0.0300\text{ plants/m}^2. Multiple interacting species (cattails plus amphibians) form a biological community. Incorporating abiotic chemical flux (methane emissions) elevates the scale to an ecosystem.

Loading workspace…