Resources
An agricultural watershed discharges excess nitrogen fertilizer into a coastal estuary, resulting in seasonal cultural eutrophication. A baseline marine survey establishes that phytoplankton assimilate inorganic dissolved nitrogen into biomass with an average carbon-to-nitrogen atomic ratio of (Redfield ratio). A pulse runoff event delivers of reactive dissolved inorganic nitrogen (as , atomic mass ) into a semi-enclosed bay of volume . Assuming all delivered nitrogen is assimilated into phytoplankton biomass () and subsequently decomposed by aerobic bacteria according to the stoichiometric relationship where of dissolved oxygen () are consumed for every of organic nitrogen remineralized, calculate the total biochemical oxygen demand () exerted on the bay in milligrams of per liter ().
Answer and steps
Final answer
Steps
Calculate the total moles of nitrogen delivered
To determine the biochemical oxygen demand () exerted on the coastal bay, follow a stoichiometric approach from nutrient input to oxygen consumption.
First, convert the mass of dissolved inorganic nitrogen () from kilograms to grams, and then calculate the amount in moles using the atomic mass of nitrogen ():
Determine the moles of dissolved oxygen () consumed
According to the stoichiometry of aerobic decomposition of Redfield biomass:
The ratio of oxygen consumption to nitrogen remineralized is:
Multiply the moles of assimilated nitrogen by this stoichiometric factor:
Calculate the total mass of oxygen consumed
Using the molar mass of molecular oxygen (), find the total mass of oxygen required:
Convert this mass to milligrams ():
Convert the bay volume to liters and compute the concentration
Convert the volume of the bay from cubic meters () to liters (), where :
Finally, divide the total mass of oxygen by the total volume of the bay:
(Note: In typical coastal marine systems, dissolved oxygen saturation is around at moderate temperatures, meaning a total BOD of has the potential to drive bottom waters into severe hypoxia or anoxia if not replenished by physical aeration or mixing).
Typical errors
01 The student uses the atomic mass of oxygen (16.0 g/mol) instead of the molecular mass of O₂ (32.0 g/mol) when converting moles of oxygen to mass, resulting in half the actual BOD value.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2
- Step 3Correct
Dissolved oxygen consumed in aerobic decomposition is molecular oxygen (), which has a molar mass of , not atomic oxygen ().
- Step 4
- Step 5Correct
Your division step is algebraically correct, but the numerical result is halved due to the oxygen mass calculation in Step 3.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly calculated the total moles of nitrogen from its mass and atomic weight.
You applied the correct Redfield stoichiometry factor of to determine oxygen demand in moles.
You performed the unit conversions for volume and metric prefixes accurately.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou wrote instead of when converting moles of dissolved oxygen gas () to mass.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisConfusing atomic oxygen (, ) with diatomic molecular oxygen (, ) when calculating chemical or biochemical oxygen demand.
REASONING PATH
Your ACEpath teacher’s suggested approach- Molecular Identity of Dissolved Oxygen
Biochemical oxygen demand (BOD) measures molecular oxygen (), with molar mass .
Always check the chemical formula of the gas molecule: when multiplying moles of to get mass, use .
CORRECTED PATH
ACEpath Teacher's DemonstrationRecalculate the mass of molecular oxygen: .
Compute the BOD concentration: .
02 The student inverts the stoichiometric ratio of oxygen to nitrogen, multiplying by 16/138 instead of 138/16, leading to a severely underestimated oxygen demand of 0.111 mg/L.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
You inverted the conversion factor between nitrogen and oxygen. The reaction consumes for every , so you should multiply by rather than .
- Step 3Correct
Your multiplication by the molar mass of () and unit conversion to milligrams were mathematically sound, but the numerical result was affected by the inverted mole value from Step 2.
- Step 4
= 8.00 10^{10} = = 0.111
Correct= 8.00 10^{10} = = 8.28
You converted the bay volume to liters correctly and correctly divided mass by volume, but the final BOD value inherited the earlier stoichiometric error.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly converted metric tons/kilograms to grams and found the moles of nitrogen.
You accurately converted the water body's volume from to .
You handled the molar mass of diatomic oxygen () and standard metric prefixes flawlessly.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou inverted the dimensional analysis conversion factor, placing the given unit () in the numerator and the desired unit () in the denominator instead of setting it up so that cancels out.
REASONING PATH
Your ACEpath teacher’s suggested approach- Dimensional Analysis Unit Cancellation
Always write the units explicitly into the fraction to ensure the given unit cancels out.
CORRECTED PATH
ACEpath Teacher's Demonstration03 The student neglects to convert cubic meters to liters when calculating concentration, effectively using 1 m³ = 1 L, resulting in an answer that is three orders of magnitude too large at 8280 mg/L.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2
- Step 3
- Step 4Correct
You substituted the volume value of directly with units of liters, but the bay's volume was given in cubic meters (). Because , the actual volume is .
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly calculated the total moles of delivered nitrogen from its mass.
You correctly applied the stoichiometric ratio of per to find the total oxygen demand.
You accurately converted moles of molecular oxygen into milligrams.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou copied the numerical volume directly as liters instead of converting from cubic meters to liters.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisConflating cubic meters () with liters () or overlooking unit conversion between SI derived volume and metric capacity units. Since , neglecting this factor scales the concentration by .
REASONING PATH
Your ACEpath teacher’s suggested approach- Unit Conversion for Fluid Volume
, and .
Always explicitly write out unit factor cancellations when converting environmental reservoir volumes from to before dividing.
- Ecological Sanity Check for Dissolved Oxygen
Water at typical marine temperatures holds roughly of saturated dissolved oxygen.
Compare calculated concentrations against physical limits: an oxygen demand of is nearly a thousand times total atmospheric saturation in water, signaling an unscaled volume denominator.
CORRECTED PATH
ACEpath Teacher's DemonstrationConvert bay volume from cubic meters to liters: .
Divide the total mass of oxygen by the corrected volume in liters: .
Lock it in
When calculating Biochemical Oxygen Demand (BOD), what molar mass must you use to convert moles of dissolved oxygen into mass?
. Dissolved oxygen exists in water as diatomic molecules (), each containing two oxygen atoms ().
Similar question
A wastewater treatment plant effluent delivers of biodegradable organic carbon to a retention basin. If aerobic respiration consumes of per mole of organic carbon, calculate the total oxygen required in kilograms of .
Answer
. Aerobic respiration requires . Multiplying by the molecular weight of () gives , which equals .
A freshwater lake of volume receives an influx of organic waste that exerts an oxygen demand requiring of for complete decomposition. Calculate the resulting BOD concentration in .
Answer
. First, find mass of : . Convert lake volume: . Finally, divide mass by volume: .
A coastal inlet has an initial dissolved oxygen concentration of . Runoff adds of reactive dissolved nitrogen (atomic mass ) into the bay (volume ). Complete decomposition consumes per . Assuming no re-aeration, calculate the final dissolved oxygen concentration in and determine whether hypoxic conditions (defined as dissolved oxygen ) occur.
Answer
(not hypoxic). Moles of . Moles of . Mass of . Volume . (or recalculating with volume: if volume is , BOD would be ; with , , leaving final ). For the standard inlet of volume : , final , which is above , so it does not reach hypoxia.