Resources

In human cells, hypoxia-inducible factor 1-alpha (HIF-1α\alpha) is continuously synthesized at a constant rate of S=2.40×10−10 mol⋅L−1⋅s−1S = 2.40 \times 10^{-10}\text{ mol}\cdot\text{L}^{-1}\cdot\text{s}^{-1}. Under normoxic conditions, prolyl hydroxylase domain (PHD) enzymes use dissolved molecular oxygen to mark HIF-1α\alpha for proteasomal degradation, resulting in a degradation rate constant of kdeg=0.0800 s−1k_{\text{deg}} = 0.0800\text{ s}^{-1}. A laboratory measures dissolved tissue oxygen in non-standard clinical units of torr\text{torr}, where 1.00 torr=1.82 μmol⋅L−11.00\text{ torr} = 1.82\text{ }\mu\text{mol}\cdot\text{L}^{-1} dissolved O2\text{O}_2. At severe hypoxia (PO2=3.50 torrP_{\text{O}_2} = 3.50\text{ torr}), PHD activity drops such that the degradation rate constant scales linearly with oxygen concentration: kdeg′=kdeg⋅([O2][O2]norm)k_{\text{deg}}' = k_{\text{deg}} \cdot \left(\frac{[\text{O}_2]}{[\text{O}_2]_{\text{norm}}}\right), where [O2]norm=130 μM[\text{O}_2]_{\text{norm}} = 130\text{ }\mu\text{M}. Convert PO2=3.50 torrP_{\text{O}_2} = 3.50\text{ torr} to μM\mu\text{M}, calculate the new degradation constant kdeg′k_{\text{deg}}', and determine the steady-state concentration of HIF-1α\alpha (in nM\text{nM}) under this hypoxic condition assuming d[HIF-1α]dt=S−kdeg′[HIF-1α]=0\frac{d[\text{HIF-1}\alpha]}{dt} = S - k_{\text{deg}}'[\text{HIF-1}\alpha] = 0.

Answer and steps

Final answer

[O2]=6.37 μM[\text{O}_2] = 6.37\text{ }\mu\text{M}, kdeg′=3.92×10−3 s−1k_{\text{deg}}' = 3.92 \times 10^{-3}\text{ s}^{-1}, and steady-state [HIF-1α]=61.2 nM[\text{HIF-1}\alpha] = 61.2\text{ nM}.

Steps

01

Convert Hypoxic Oxygen Pressure to Concentration

The relationship between the clinical pressure units and molar concentration is given by 1.00 torr=1.82 μmol⋅L−1=1.82 μM1.00\text{ torr} = 1.82\text{ }\mu\text{mol}\cdot\text{L}^{-1} = 1.82\text{ }\mu\text{M}.

Multiply the severe hypoxia pressure POX2=3.50 torrP_{\ce{O2}} = 3.50\text{ torr} by this conversion factor: [OX2]=3.50 torr⋅1.82 μM⋅torr−1=6.37 μM[\ce{O2}] = 3.50\text{ torr} \cdot 1.82\text{ }\mu\text{M}\cdot\text{torr}^{-1} = 6.37\text{ }\mu\text{M}


02

Determine the Hypoxic Degradation Rate Constant (kdeg′k_{\text{deg}}')

Under hypoxic conditions, prolyl hydroxylase domain (PHD) enzymes lack the necessary substrate (OX2\ce{O2}) to hydroxylate HIF-1α\alpha, causing degradation activity to drop in proportion to the available oxygen concentration relative to normoxic conditions ([OX2]norm=130 μM[\ce{O2}]_{\text{norm}} = 130\text{ }\mu\text{M}):

kdeg′=kdeg⋅([OX2][OX2]norm)k_{\text{deg}}' = k_{\text{deg}} \cdot \left(\frac{[\ce{O2}]}{[\ce{O2}]_{\text{norm}}}\right)

Substitute the known values into the equation: kdeg′=0.0800 s−1⋅(6.37 μM130 μM)=0.0800 s−1⋅0.0490=3.92×10−3 s−1k_{\text{deg}}' = 0.0800\text{ s}^{-1} \cdot \left(\frac{6.37\text{ }\mu\text{M}}{130\text{ }\mu\text{M}}\right) = 0.0800\text{ s}^{-1} \cdot 0.0490 = 3.92 \times 10^{-3}\text{ s}^{-1}


03

Calculate the Steady-State Concentration of HIF-1α\alpha

At steady state, the rate of continuous synthesis (SS) equals the rate of degradation (kdeg′[HIF-1α]k_{\text{deg}}'[\text{HIF-1}\alpha]), meaning the net rate of change is zero: d[HIF-1α]dt=S−kdeg′[HIF-1α]=0\frac{d[\text{HIF-1}\alpha]}{dt} = S - k_{\text{deg}}'[\text{HIF-1}\alpha] = 0

Rearrange to solve for the steady-state concentration: [HIF-1α]=Skdeg′[\text{HIF-1}\alpha] = \frac{S}{k_{\text{deg}}'}

Substitute S=2.40×10−10 mol⋅L−1⋅s−1S = 2.40 \times 10^{-10}\text{ mol}\cdot\text{L}^{-1}\cdot\text{s}^{-1} and kdeg′=3.92×10−3 s−1k_{\text{deg}}' = 3.92 \times 10^{-3}\text{ s}^{-1}: [HIF-1α]=2.40×10−10 mol⋅L−1⋅s−13.92×10−3 s−1≈6.122×10−8 mol⋅L−1[\text{HIF-1}\alpha] = \frac{2.40 \times 10^{-10}\text{ mol}\cdot\text{L}^{-1}\cdot\text{s}^{-1}}{3.92 \times 10^{-3}\text{ s}^{-1}} \approx 6.122 \times 10^{-8}\text{ mol}\cdot\text{L}^{-1}

Convert from mol⋅L−1\text{mol}\cdot\text{L}^{-1} (M\text{M}) to nanomolar (nM\text{nM}, where 1 nM=10−9 M1\text{ nM} = 10^{-9}\text{ M}): [HIF-1α]=6.122×10−8 M⋅(109 nM1 M)=61.2 nM[\text{HIF-1}\alpha] = 6.122 \times 10^{-8}\text{ M} \cdot \left(\frac{10^9\text{ nM}}{1\text{ M}}\right) = 61.2\text{ nM}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student divides by the conversion factor instead of multiplying when converting torr to μM.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    [O2]=3.501.82=1.92 μM[\text{O}_2] = \frac{3.50}{1.82} = 1.92\text{ }\mu\text{M}

    Correct

    [O2]=3.50 torr×1.82 μM⋅torr−1=6.37 μM[\text{O}_2] = 3.50\text{ torr} \times 1.82\text{ }\mu\text{M}\cdot\text{torr}^{-1} = 6.37\text{ }\mu\text{M}

    You divided the pressure by the conversion factor instead of multiplying. Since 1.00 torr=1.82 μM1.00\text{ torr} = 1.82\text{ }\mu\text{M}, converting 3.50 torr3.50\text{ torr} requires multiplying by 1.82 μM⋅torr−11.82\text{ }\mu\text{M}\cdot\text{torr}^{-1} to cancel the unit of torr\text{torr}.

  2. Step 2

    kdeg′=0.0800×1.92130=1.18×10−3 s−1k_{\text{deg}}' = 0.0800 \times \frac{1.92}{130} = 1.18 \times 10^{-3}\text{ s}^{-1}

    Correct

    kdeg′=0.0800 s−1×(6.37 μM130 μM)=3.92×10−3 s−1k_{\text{deg}}' = 0.0800\text{ s}^{-1} \times \left(\frac{6.37\text{ }\mu\text{M}}{130\text{ }\mu\text{M}}\right) = 3.92 \times 10^{-3}\text{ s}^{-1}

    You applied the scaling formula kdeg′=kdeg⋅([O2][O2]norm)k_{\text{deg}}' = k_{\text{deg}} \cdot \left(\frac{[\text{O}_2]}{[\text{O}_2]_{\text{norm}}}\right) correctly, but the numerical result is affected by your earlier oxygen concentration value.

  3. Step 3

    [HIF-1α]=2.40×10−101.18×10−3=2.03×10−7 mol/L=203 nM[\text{HIF-1}\alpha] = \frac{2.40 \times 10^{-10}}{1.18 \times 10^{-3}} = 2.03 \times 10^{-7}\text{ mol/L} = 203\text{ nM}

    Correct

    [HIF-1α]=2.40×10−10 mol⋅L−1⋅s−13.92×10−3 s−1=6.12×10−8 M=61.2 nM[\text{HIF-1}\alpha] = \frac{2.40 \times 10^{-10}\text{ mol}\cdot\text{L}^{-1}\cdot\text{s}^{-1}}{3.92 \times 10^{-3}\text{ s}^{-1}} = 6.12 \times 10^{-8}\text{ M} = 61.2\text{ nM}

    You correctly rearranged the steady-state equation to [HIF-1α]=Skdeg′[\text{HIF-1}\alpha] = \frac{S}{k_{\text{deg}}'} and converted mol/L\text{mol}/\text{L} to nM\text{nM}, but the value is shifted due to the propagated error from Step 1.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly applied the proportional scaling equation to find the hypoxic degradation rate constant.

You correctly derived the steady-state expression [HIF-1α]=Skdeg′[\text{HIF-1}\alpha] = \frac{S}{k_{\text{deg}}'} by setting the rate of change to zero.

You correctly converted the concentration from mol/L\text{mol}/\text{L} to nM\text{nM} by multiplying by 109 nM/M10^9\text{ nM}/\text{M}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverted conversion factor

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the conversion equivalence 1.00 torr=1.82 μM1.00\text{ torr} = 1.82\text{ }\mu\text{M} as a divisor rather than setting up dimensional analysis with explicit units where torr\text{torr} cancels in the numerator.

REASONING PATH
Your ACEpath teacher’s suggested approach
Dimensional Analysis Check
  • Always write conversion factors as fractions with units: given unit×target unitgiven unit=target unit\text{given unit} \times \frac{\text{target unit}}{\text{given unit}} = \text{target unit}.

  • Set up 3.50 torr×1.82 μM1.00 torr3.50\text{ torr} \times \frac{1.82\text{ }\mu\text{M}}{1.00\text{ torr}} and verify that torr\text{torr} cancels out before calculating.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Multiply pressure by the conversion factor: [O2]=3.50 torr×1.82 μM⋅torr−1=6.37 μM[\text{O}_2] = 3.50\text{ torr} \times 1.82\text{ }\mu\text{M}\cdot\text{torr}^{-1} = 6.37\text{ }\mu\text{M}.

  2. Substitute into the scaling relation: kdeg′=0.0800 s−1×(6.37 μM130 μM)=3.92×10−3 s−1k_{\text{deg}}' = 0.0800\text{ s}^{-1} \times \left(\frac{6.37\text{ }\mu\text{M}}{130\text{ }\mu\text{M}}\right) = 3.92 \times 10^{-3}\text{ s}^{-1}.

  3. Calculate steady-state concentration: [HIF-1α]=2.40×10−10 M⋅s−13.92×10−3 s−1=6.12×10−8 M=61.2 nM[\text{HIF-1}\alpha] = \frac{2.40 \times 10^{-10}\text{ M}\cdot\text{s}^{-1}}{3.92 \times 10^{-3}\text{ s}^{-1}} = 6.12 \times 10^{-8}\text{ M} = 61.2\text{ nM}.

Final answer

[O2]=6.37 μM[\text{O}_2] = 6.37\text{ }\mu\text{M}, kdeg′=3.92×10−3 s−1k_{\text{deg}}' = 3.92 \times 10^{-3}\text{ s}^{-1}, and steady-state [HIF-1α]=61.2 nM[\text{HIF-1}\alpha] = 61.2\text{ nM}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice tracking units explicitly through every conversion step using dimensional analysis.

  • Check that each intermediate physiological value changes in the expected direction as oxygen decreases.

OverviewACEpath Teacher's Diagnosis

02 The student inverts the ratio of oxygen concentrations when calculating the hypoxic degradation rate constant.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    [O2]=3.50×1.82=6.37 μM[\text{O}_2] = 3.50 \times 1.82 = 6.37\ \mu\text{M}

  2. Step 2

    kdeg′=0.0800×(1306.37)=1.63 s−1k_{\text{deg}}' = 0.0800 \times \left(\frac{130}{6.37}\right) = 1.63\text{ s}^{-1}

    Correct

    kdeg′=0.0800 s−1×(6.37 μM130 μM)=3.92×10−3 s−1k_{\text{deg}}' = 0.0800\text{ s}^{-1} \times \left(\frac{6.37\ \mu\text{M}}{130\ \mu\text{M}}\right) = 3.92 \times 10^{-3}\text{ s}^{-1}

    You inverted the oxygen ratio as [O2]norm[O2]\frac{[\text{O}_2]_{\text{norm}}}{[\text{O}_2]} instead of [O2][O2]norm\frac{[\text{O}_2]}{[\text{O}_2]_{\text{norm}}}. Because oxygen is a required substrate for prolyl hydroxylase, severe hypoxia must decrease the degradation rate constant below 0.0800 s−10.0800\text{ s}^{-1}, not increase it.

  3. Step 3

    [HIF-1α]=2.40×10−101.63=1.47×10−10 mol/L=0.147 nM[\text{HIF-1}\alpha] = \frac{2.40 \times 10^{-10}}{1.63} = 1.47 \times 10^{-10}\text{ mol/L} = 0.147\text{ nM}

    Correct

    [HIF-1α]=2.40×10−10 mol⋅L−1⋅s−13.92×10−3 s−1=6.12×10−8 M=61.2 nM[\text{HIF-1}\alpha] = \frac{2.40 \times 10^{-10}\text{ mol}\cdot\text{L}^{-1}\cdot\text{s}^{-1}}{3.92 \times 10^{-3}\text{ s}^{-1}} = 6.12 \times 10^{-8}\text{ M} = 61.2\text{ nM}

    Your rearrangement of the steady-state formula and unit conversion to nanomolar were mathematically sound, but the final value was affected by the incorrect degradation rate constant from the previous step.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the hypoxic oxygen concentration as 6.37 μM6.37\ \mu\text{M}.

You correctly set up the steady-state relation [HIF-1α]=Skdeg′[\text{HIF-1}\alpha] = \frac{S}{k_{\text{deg}}'}.

You accurately converted molarity to nanomolar.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverted ratio in scaling law

You set up the scaling ratio upside down as 1306.37\frac{130}{6.37} instead of 6.37130\frac{6.37}{130}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You overlooked the biological reality and mathematical meaning of the proportionality. When oxygen availability drops during hypoxia, oxygen-dependent prolyl hydroxylase activity drops, so kdeg′k_{\text{deg}}' must become smaller than kdegk_{\text{deg}}, requiring the hypoxic value in the numerator and the normoxic reference value in the denominator.

REASONING PATH
Your ACEpath teacher’s suggested approach
Sense-check rate scaling with environmental substrate
  • When an enzyme requires a substrate, lower substrate availability must reduce its reaction rate constant (k′<kk' < k).

  • Before evaluating, check whether your scaling factor is <1< 1 for a deficiency or >1> 1 for an excess.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Recalculate kdeg′=0.0800 s−1×(6.37 μM130 μM)=3.92×10−3 s−1k_{\text{deg}}' = 0.0800\text{ s}^{-1} \times \left(\frac{6.37\ \mu\text{M}}{130\ \mu\text{M}}\right) = 3.92 \times 10^{-3}\text{ s}^{-1}.

  2. Substitute kdeg′k_{\text{deg}}' into the steady-state equation: [HIF-1α]=2.40×10−10 mol⋅L−1⋅s−13.92×10−3 s−1=6.122×10−8 mol⋅L−1[\text{HIF-1}\alpha] = \frac{2.40 \times 10^{-10}\text{ mol}\cdot\text{L}^{-1}\cdot\text{s}^{-1}}{3.92 \times 10^{-3}\text{ s}^{-1}} = 6.122 \times 10^{-8}\text{ mol}\cdot\text{L}^{-1}.

  3. Convert to nanomolar: 6.122×10−8 M×109 nM⋅M−1=61.2 nM6.122 \times 10^{-8}\text{ M} \times 10^9\text{ nM}\cdot\text{M}^{-1} = 61.2\text{ nM}.

Final answer

[O2]=6.37 μM, kdeg′=3.92×10−3 s−1, and [HIF-1α]=61.2 nM[\text{O}_2] = 6.37\ \mu\text{M},\ k_{\text{deg}}' = 3.92 \times 10^{-3}\text{ s}^{-1},\ \text{and } [\text{HIF-1}\alpha] = 61.2\text{ nM}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always perform a physical sanity check on kinetic ratios: verify whether hypoxia should stabilize or degrade the target transcription factor.

  • Double-check that the variable condition is in the numerator and the baseline reference condition is in the denominator when using proportional scaling formulas.

OverviewACEpath Teacher's Diagnosis

03 The student forgets to convert the final concentration from mol/L to nM, reporting the numerical value directly in mol/L.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    [O2]=3.50∗1.82=6.37 μM[\text{O}_2] = 3.50 * 1.82 = 6.37\text{ }\mu\text{M}

  2. Step 2

    kdeg′=0.0800∗(6.37130)=3.92∗10−3 s−1k_{\text{deg}}' = 0.0800 * \left(\frac{6.37}{130}\right) = 3.92 * 10^{-3}\text{ s}^{-1}

  3. Step 3

    [HIF-1α]=2.40∗10−103.92∗10−3=6.12∗10−8 nM[\text{HIF-1}\alpha] = \frac{2.40 * 10^{-10}}{3.92 * 10^{-3}} = 6.12 * 10^{-8}\text{ nM}

    Correct

    [HIF-1α]=2.40×10−10 M⋅s−13.92×10−3 s−1=6.122×10−8 M=61.2 nM[\text{HIF-1}\alpha] = \frac{2.40 \times 10^{-10}\text{ M}\cdot\text{s}^{-1}}{3.92 \times 10^{-3}\text{ s}^{-1}} = 6.122 \times 10^{-8}\text{ M} = 61.2\text{ nM}

    You correctly solved for the steady-state concentration in mol⋅L−1\text{mol}\cdot\text{L}^{-1} (M\text{M}), but you labeled the numerical value as nM\text{nM} without multiplying by 109 nM/M10^9\text{ nM}/\text{M} to perform the unit conversion.

WHAT YOU DID WELL
Compliments from Your Teacher

You accurately converted the oxygen partial pressure into micromolar concentration using the given clinical conversion factor.

You correctly applied the proportional scaling formula to find the hypoxic degradation rate constant kdeg′k_{\text{deg}}'.

You correctly identified the steady-state balance equation [HIF-1α]=Skdeg′[\text{HIF-1}\alpha] = \frac{S}{k_{\text{deg}}'} and evaluated the arithmetic accurately in base SI units.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Premature unit relabeling without dimensional conversion

You wrote nM\text{nM} next to 6.12×10−86.12 \times 10^{-8} even though dividing mol⋅L−1⋅s−1\text{mol}\cdot\text{L}^{-1}\cdot\text{s}^{-1} by s−1\text{s}^{-1} yields mol⋅L−1\text{mol}\cdot\text{L}^{-1} (M\text{M}).

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the target unit nM\text{nM} as a label replacement rather than carrying out an explicit dimensional factor conversion (1 M=109 nM1\text{ M} = 10^9\text{ nM}).

REASONING PATH
Your ACEpath teacher’s suggested approach
Unit Verification Check
  • Always track base units through division: mol⋅L−1⋅s−1s−1=mol⋅L−1=M\frac{\text{mol}\cdot\text{L}^{-1}\cdot\text{s}^{-1}}{\text{s}^{-1}} = \text{mol}\cdot\text{L}^{-1} = \text{M}.

  • Write out the resulting unit explicitly before converting to metric prefixes such as nano- (×109\times 10^9) or micro- (×106\times 10^6).

Prefix Magnitude Check
  • 1 nM=10−9 M1\text{ nM} = 10^{-9}\text{ M}, so [extnM]=[M]×109[ ext{nM}] = [\text{M}] \times 10^9.

  • Multiply molar values by 10910^9 to express them in nanomolar.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. S=2.40×10−10 mol⋅L−1⋅s−1S = 2.40 \times 10^{-10}\text{ mol}\cdot\text{L}^{-1}\cdot\text{s}^{-1} and kdeg′=3.92×10−3 s−1k_{\text{deg}}' = 3.92 \times 10^{-3}\text{ s}^{-1} yield [HIF-1α]=2.40×10−103.92×10−3=6.122×10−8 mol⋅L−1[\text{HIF-1}\alpha] = \frac{2.40 \times 10^{-10}}{3.92 \times 10^{-3}} = 6.122 \times 10^{-8}\text{ mol}\cdot\text{L}^{-1} (M\text{M}).

  2. Convert from M\text{M} to nM\text{nM} by multiplying by 109 nM⋅M−110^9\text{ nM}\cdot\text{M}^{-1}: 6.122×10−8×109=61.2 nM6.122 \times 10^{-8} \times 10^9 = 61.2\text{ nM}.

Final answer

[O2]=6.37 μM[\text{O}_2] = 6.37\text{ }\mu\text{M}, kdeg′=3.92×10−3 s−1k_{\text{deg}}' = 3.92 \times 10^{-3}\text{ s}^{-1}, and steady-state [HIF-1α]=61.2 nM[\text{HIF-1}\alpha] = 61.2\text{ nM}

NEXT STEPS
Final Takeaways from Your Teacher
  • Write the calculated intermediate units explicitly as M\text{M} or mol⋅L−1\text{mol}\cdot\text{L}^{-1} before applying requested prefixes like nM\text{nM}.

  • Multiply by 109 nM/M10^9\text{ nM}/\text{M} whenever converting from standard molarity to nanomolar concentration.

Lock it in

Similar question

01

A cell culture is maintained at a tissue oxygen pressure of PO2=5.00 torrP_{\text{O}_2} = 5.00\text{ torr}. Convert this value to micromolar concentration given 1.00 torr=1.82 μM1.00\text{ torr} = 1.82\text{ }\mu\text{M}.

Answer

[O2]=9.10 μM[\text{O}_2] = 9.10\text{ }\mu\text{M}. Key step: Multiply 5.00 torr×1.82 μM⋅torr−1=9.10 μM5.00\text{ torr} \times 1.82\text{ }\mu\text{M}\cdot\text{torr}^{-1} = 9.10\text{ }\mu\text{M}.

02

Using [O2]=9.10 μM[\text{O}_2] = 9.10\text{ }\mu\text{M} and a baseline normoxic degradation constant of kdeg=0.0800 s−1k_{\text{deg}} = 0.0800\text{ s}^{-1} at [O2]norm=130 μM[\text{O}_2]_{\text{norm}} = 130\text{ }\mu\text{M}, calculate the hypoxia degradation rate constant kdeg′=kdeg⋅([O2][O2]norm)k_{\text{deg}}' = k_{\text{deg}} \cdot \left(\frac{[\text{O}_2]}{[\text{O}_2]_{\text{norm}}}\right).

Answer

kdeg′=5.60×10−3 s−1k_{\text{deg}}' = 5.60 \times 10^{-3}\text{ s}^{-1}. Key step: kdeg′=0.0800 s−1×(9.10 μM130 μM)=0.0800×0.0700=5.60×10−3 s−1k_{\text{deg}}' = 0.0800\text{ s}^{-1} \times \left(\frac{9.10\text{ }\mu\text{M}}{130\text{ }\mu\text{M}}\right) = 0.0800 \times 0.0700 = 5.60 \times 10^{-3}\text{ s}^{-1}.

03

If the synthesis rate of a transcription factor is S=3.36×10−10 mol⋅L−1⋅s−1S = 3.36 \times 10^{-10}\text{ mol}\cdot\text{L}^{-1}\cdot\text{s}^{-1} and its degradation constant is kdeg′=5.60×10−3 s−1k_{\text{deg}}' = 5.60 \times 10^{-3}\text{ s}^{-1}, find its steady-state concentration in nanomolar (nM\text{nM}).

Answer

60.0 nM60.0\text{ nM}. Key steps: [Factor]=Skdeg′=3.36×10−10 M⋅s−15.60×10−3 s−1=6.00×10−8 M[\text{Factor}] = \frac{S}{k_{\text{deg}}'} = \frac{3.36 \times 10^{-10}\text{ M}\cdot\text{s}^{-1}}{5.60 \times 10^{-3}\text{ s}^{-1}} = 6.00 \times 10^{-8}\text{ M}; multiply by 109 nM/M10^9\text{ nM}/\text{M} to get 60.0 nM60.0\text{ nM}.

Loading workspace…