Resources

In a college invertebrate biology practical, an unknown coelomate specimen is dissected under a stereomicroscope to determine its phylogenetic affiliation. A student collects the following quantitative and anatomical data from serial transverse sections: (1) Total body length L=120 mmL = 120\text{ mm}, composed of n=85n = 85 repeating external and internal anatomical segments. (2) Each segment contains a paired coelomic cavity separated from adjacent segments by transverse sheets of mesodermal tissue. (3) Ventral nerve cord with segmental ganglia is present. (4) Paired metanephridia occur in each segment. (a) Name the transverse mesodermal sheets that partition the coelom into distinct hydrostatic compartments. (b) Calculate the mean segment length lˉ=Ln\bar{l} = \frac{L}{n} in millimeters to three significant figures. (c) Explain the mechanical principle of how segmented coelomic compartments operating as independent hydrostatic units enable peristaltic burrowing locomotion via alternating contractions of circular and longitudinal muscles. (d) Based on these findings, identify the animal phylum of this specimen.

Answer and steps

Final answer

(a) Septa (intersegmental septa); (b) lˉ=120 mm85≈1.41 mm\bar{l} = \frac{120\text{ mm}}{85} \approx 1.41\text{ mm}; (c) Because coelomic fluid is incompressible, contraction of circular muscles in a given segment exerts hydrostatic pressure that increases segment length while decreasing diameter. Subsequent contraction of longitudinal muscles shortens the segment while expanding its diameter, anchoring it against the substrate via chaetae. Because transverse septa isolate the fluid in each segment, pressure changes do not propagate throughout the entire length of the body, allowing alternating waves of localized elongation and widening (peristalsis) that generate forward thrust; (d) Phylum Annelida.

Steps

Part (a): Identification of Internal Partitions

The internal transverse walls of mesodermal tissue dividing consecutive body segments are called septa (or intersegmental septa). Each septum isolates the coelomic fluid of one segment from that of adjacent segments, creating functionally discrete fluid compartments.


Part (b): Calculation of Mean Segment Length

The mean segment length lˉ\bar{l} is given by dividing the total body length LL by the number of segments nn:

lˉ=Ln\bar{l} = \frac{L}{n}

Given:

  • Total body length, L=120 mmL = 120\text{ mm}
  • Number of segments, n=85n = 85

Substitute the given values into the formula:

lˉ=120 mm85≈1.41176… mm\bar{l} = \frac{120\text{ mm}}{85} \approx 1.41176\dots\text{ mm}

Rounding to three significant figures yields:

lˉ≈1.41 mm\bar{l} \approx 1.41\text{ mm}


Part (c): Biomechanics of Hydrostatic Locomotion

Peristaltic burrowing relies on the physical properties of a hydrostatic skeleton:

  1. Incompressibility of Coelomic Fluid:
    The fluid filling each coelomic compartment has a fixed volume. Consequently, any reduction in one dimension of a segment forces an increase in another dimension.
  2. Action of Antagonistic Muscles:

    • Circular muscle contraction: When the circular muscles encircling a segment contract, they decrease the segment's cross-sectional diameter. To conserve fluid volume, the internal hydrostatic pressure extends the segment longitudinally, pushing the anterior end forward.
    • Longitudinal muscle contraction: When the longitudinal muscles contract, they shorten the segment. This forces the segment to widen radially, anchoring it firmly against the burrow walls (often assisted by bristled chaetae).
  3. Role of Intersegmental Septa:
    Without septa, localized pressure changes would travel freely through the entire body cavity, causing generalized swelling rather than targeted deformation. Because septa partition the coelom into independent hydrostatic chambers, the nervous system can coordinate alternating, localized waves of contraction (peristalsis). Segments anchored by radial expansion provide leverage, while elongated segments extend into new substrate, producing directed locomotion.

Part (d): Identification of the Animal Phylum

The presence of:

  • True metameric segmentation (internal septa matching external segments),
  • A segmented, fluid-filled coelom functioning as a hydrostatic skeleton,
  • A ventral nerve cord with paired segmental ganglia, and
  • Paired metanephridia per segment,

is diagnostic of the Phylum Annelida (segmented worms).

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student rounds the division result incorrectly to two significant figures instead of three.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Septa

  2. Step 2

    lˉ\bar{l} = 12085\frac{120}{85} \Longrightarrow lˉ\bar{l} = crossed out \text{crossed out } 1.41 mm\text{ mm}, ; lˉ\bar{l} = 1.4117 mm\text{ mm} \Longrightarrow lˉ\bar{l} = 1.4 mm\text{ mm}

    Correct

    lˉ=120 mm85≈1.41 mm\bar{l} = \frac{120\text{ mm}}{85} \approx 1.41\text{ mm}

    You correctly set up the division and calculated 1.4117… mm1.4117\dots\text{ mm}, but your final answer of 1.4 mm1.4\text{ mm} contains only two significant figures rather than the requested three significant figures.

  3. Step 3

    Coelomic fluid is incompressible within each sealed septum-bound segment. Contraction of circular muscles increases pressure and elongates the segment. Contraction of longitudinal muscles shortens and widens the segment to anchor it, enabling peristalsis.

  4. Step 4

    Annelida

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the transverse partitioning walls as septa.

You clearly explained how incompressibility and antagonistic muscle pairs produce peristaltic locomotion.

You accurately classified the specimen as belonging to Phylum Annelida.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Significant Figures Rounding Error

You initially wrote the correct three-significant-figure value of 1.41 mm1.41\text{ mm}, but crossed it out to provide 1.4 mm1.4\text{ mm}, confusing significant figures with decimal places or over-rounding.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the total count of significant figures (non-zero digits from the left) with the number of digits after the decimal point, leading to an answer with two significant figures instead of three.

REASONING PATH
Your ACEpath teacher’s suggested approach
Count Significant Figures
  • For a non-zero decimal number greater than 1, all non-zero digits count toward significant figures.

  • Count three digits from the first non-zero digit on the left: in 1.4117…1.4117\dots, the first three significant figures are 1, 4, and 1.

Rounding Rule
  • Inspect the first discarded digit immediately following the desired significant figure.

  • Since the fourth digit in 1.41171.4117 is 1 (less than 5), round down to keep the third digit unchanged: 1.41 mm1.41\text{ mm}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set up the ratio: lˉ=120 mm85≈1.41176… mm\bar{l} = \frac{120\text{ mm}}{85} \approx 1.41176\dots\text{ mm}.

  2. Identify the first three significant digits: 11, .4.4, and 11.

  3. Look at the fourth digit, which is 1<51 < 5, so keep the third digit as 11.

Final answer

lˉ≈1.41 mm\bar{l} \approx 1.41\text{ mm}

NEXT STEPS
Final Takeaways from Your Teacher
  • Double-check precision specifications in practical exam prompts before finalizing your answer.

  • Practice distinguishing between 'three significant figures' (1.411.41) and 'one decimal place' (1.41.4).

OverviewACEpath Teacher's Diagnosis

02 The student confuses the mechanical roles of antagonistic circular and longitudinal muscles during hydrostatic peristalsis.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Septa

  2. Step 2

    lˉ=12085  ⟹  lˉ=1.41 mm\bar{l} = \frac{120}{85} \implies \bar{l} = 1.41\text{ mm}

  3. Step 3

    Coelomic fluid acts as an incompressible hydrostatic skeleton within isolated segments. Circular muscle contraction causes the segment to shorten and widen. Longitudinal muscle contraction elongates and thins the segment to push it forward.

    Correct

    Because coelomic fluid is incompressible, contraction of circular muscles decreases diameter and forces the segment to elongate. Contraction of longitudinal muscles shortens the segment and forces it to widen radially, anchoring it against the burrow wall. Septa isolate these volume-conserving deformations into distinct segments, producing alternating peristaltic waves.

    You accurately identified the role of incompressible fluid and isolated compartments, but you reversed the biomechanical consequences of the two muscle layers. Circular muscles encircle the circumference; contracting them reduces the cross-sectional diameter, which forces the segment to elongate. Longitudinal muscles run end-to-end; contracting them decreases segment length, which forces the segment to widen radially.

  4. Step 4

    Annelida

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the transverse mesodermal walls as septa.

You accurately calculated the mean segment length to three significant figures.

You correctly recognized that the coelomic fluid acts as an incompressible hydrostatic skeleton.

You correctly classified the specimen into the phylum Annelida based on anatomical criteria.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Antagonistic Muscle Action Inversion

You swapped the dimensional outcomes of contracting circular versus longitudinal muscle fibers.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You likely focused on the overall locomotor outcome (elongating forward versus anchoring) without tracing the direct geometric dimension constrained by fiber orientation. Muscles can only actively contract (shorten along their own fiber axis). Because circular fibers wrap around the body cylinder, shortening along their fiber length reduces circumference and diameter; by conservation of fluid volume (V=πr2lV = \pi r^2 l), decreasing radius rr forces length ll to increase. Conversely, longitudinal fibers run parallel to the body axis, so shortening along their fiber length decreases segment length ll, forcing radius rr to expand.

REASONING PATH
Your ACEpath teacher’s suggested approach
Muscle Fiber Orientation
  • Muscles only generate active force by shortening along the direction of their fibers.

  • Identify the physical orientation of the muscle fibers relative to the body cylinder before determining the shape change.

Constant Volume Hydrostatic Skeleton
  • Because liquid is incompressible, an enclosed fluid cylinder obeys V=πr2l=constantV = \pi r^2 l = \text{constant}.

  • Whenever a muscle contraction reduces one dimension (radius or length), deduce that the perpendicular dimension must expand.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. State that coelomic fluid is incompressible, maintaining a constant volume per septate compartment (V=constantV = \text{constant}).

  2. Analyze circular muscles: their fibers run circumferentially around the segment. When they contract, they shorten the circumference, reducing the diameter (r↓r \downarrow).

  3. Apply constant volume: decreasing radius forces the segment to elongate along the longitudinal axis (l↑l \uparrow), thrusting the anterior end forward.

  4. Analyze longitudinal muscles: their fibers run parallel to the anterior-posterior axis. When they contract, they shorten the segment (l↓l \downarrow).

  5. Apply constant volume: shortening the segment forces it to widen radially (r↑r \uparrow), anchoring chaetae against the burrow wall to provide forward leverage.

Final answer

Contraction of circular muscles decreases segment diameter, forcing longitudinal extension that drives the worm forward. Contraction of longitudinal muscles shortens the segment, forcing radial expansion that anchors it against the substrate. Septa isolate these fluid shifts, enabling localized, sequential peristaltic waves.

NEXT STEPS
Final Takeaways from Your Teacher
  • Sketch a single cylindrical segment wrapped with rubber bands (representing circular muscles) and strings running end-to-end (representing longitudinal muscles) to visualize how shortening each fiber set deforms the segment.

  • Practice pairing the active shortening of each muscle layer with the corresponding passive expansion of the antagonistic dimension under constant volume conditions.

  • Review how chaetae (setae) interact with the widened segments to prevent backward slipping during burrowing.

OverviewACEpath Teacher's Diagnosis

03 The student misidentifies the phylum as Arthropoda due to superficial segmented body structure despite the presence of metameric internal coelomic septa and metanephridia.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Septa

  2. Step 2

    lˉ=12085  ⟹  lˉ=1.41 mm\bar{l} = \frac{120}{85} \implies \bar{l} = 1.41\text{ mm}

  3. Step 3

    The incompressible fluid in compartmentalized segments transmits hydraulic pressure.   ⟹  \implies Circular muscle contraction narrows and extends the segment forward.   ⟹  \implies Longitudinal muscle contraction thickens the segment to form an anchor point.

  4. Step 4

    Arthropoda

    Correct

    Phylum Annelida

    You named Arthropoda, but arthropods possess a rigid chitinous exoskeleton, a reduced coelom forming a hemocoel, and lack hydrostatic coelomic septa or metanephridia. The combination of true metameric segmentation, a compartmentalized hydrostatic coelom with septa, and paired metanephridia is diagnostic of Phylum Annelida.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recalled the anatomical term 'septa' for internal mesodermal partitions.

You accurately carried out the division and rounded the mean segment length to three significant figures.

You clearly described the biomechanical roles of circular and longitudinal muscles acting on an incompressible fluid.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Phylum misidentification from segmentation confusion

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You associated external and internal body segmentation with Arthropoda while overlooking that arthropods feature a rigid exoskeleton and a hemocoel rather than an expansive, septate hydrostatic coelom with metanephridia.

REASONING PATH
Your ACEpath teacher’s suggested approach
Coelom and Skeleton Type
  • Annelids rely on a spacious, septate coelom as a hydrostatic skeleton, whereas arthropods rely on a rigid cuticular exoskeleton and possess a reduced coelom (hemocoel).

  • Check whether locomotion is driven by hydrostatic fluid compartments or articulated jointed appendages attached to an exoskeleton.

Excretory System of Metameric Invertebrates
  • Segmentally arranged paired metanephridia open directly into the coelom in annelids; terrestrial or aquatic arthropods use Malpighian tubules, antennal glands, or maxillary glands.

  • Use the presence of segmental metanephridia as a key diagnostic hallmark pointing toward Annelida rather than Arthropoda.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Evaluate the anatomical clues: internal transverse septa dividing a fluid-filled coelom into independent hydrostatic units, paired metanephridia per segment, and a ventral nerve cord with segmental ganglia.

  2. Compare body plans: Arthropoda has jointed appendages, a cuticular exoskeleton, and an open hemocoel without intersegmental hydrostatic septa. Annelida exhibits homonomous metamerism with a well-developed, septate hydrostatic coelom.

  3. Conclude that the specimen belongs to Phylum Annelida.

Final answer

Phylum Annelida

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the major anatomical contrasts between Annelida and Arthropoda, focusing on coelom fate (hydrostatic compartments vs. hemocoel).

  • Practice distinguishing excretory structures (metanephridia, protonephridia, Malpighian tubules) across protostome phyla.

Lock it in

Similar question

01

A marine polychaete worm has an overall length of L=74.0 mmL = 74.0\text{ mm} and consists of n=56n = 56 identical segments. Calculate its mean segment length lˉ\bar{l} in millimeters to three significant figures.

Answer

lˉ=74.0 mm56≈1.3214… mm\bar{l} = \frac{74.0\text{ mm}}{56} \approx 1.3214\dots\text{ mm}. Rounding to three significant figures gives 1.32 mm1.32\text{ mm}.

02

A cylindrical annelid segment has a constant fluid volume of V=18.0 mm3V = 18.0\text{ mm}^3 and an initial cross-sectional area of A1=6.00 mm2A_1 = 6.00\text{ mm}^2. During circular muscle contraction, the cross-sectional area decreases to A2=4.25 mm2A_2 = 4.25\text{ mm}^2. Calculate the new segment length l2=VA2l_2 = \frac{V}{A_2} to three significant figures.

Answer

l2=18.0 mm34.25 mm2≈4.23529… mml_2 = \frac{18.0\text{ mm}^3}{4.25\text{ mm}^2} \approx 4.23529\dots\text{ mm}. Looking at the fourth digit (5), round up to obtain 4.24 mm4.24\text{ mm}.

03

Nematodes have a pseudocoelom with high hydrostatic turgor pressure but possess only longitudinal body-wall muscles and no internal septa. Contrast their locomotion with the peristaltic crawling of an annelid, referencing their musculature and coelom compartmentalization.

Answer

Because nematodes lack circular muscles and transverse septa, fluid pressure cannot be isolated into discrete segments, and muscles can only pull against the opposite body wall, producing whole-body dorsoventral sinusoidal thrashing. In contrast, annelids possess transverse septa that isolate hydrostatic compartments and antagonistic circular and longitudinal muscle pairs, enabling localized alternating waves of elongation and expansion (peristalsis) for burrowing.

Loading workspace…