Resources

An ecotoxicologist measures heavy metal accumulation in freshwater chironomid larvae exposed to cadmium chloride. Three nominal cadmium exposure concentrations are prepared in synthetic freshwater: 0.00 ppm0.00\text{ ppm}, 0.50 ppm0.50\text{ ppm}, and 2.50 ppm2.50\text{ ppm}. Bioaccumulation in larval tissue after 72 h72\text{ h} is quantified using atomic absorption spectroscopy and expressed in non-standard units of μg⋅(g dry weight)−1\mu\text{g}\cdot(\text{g dry weight})^{-1}, whereas water samples are analyzed in μmol⋅L−1\mu\text{mol}\cdot\text{L}^{-1}. For each concentration, 66 aquaria containing 2020 larvae each are maintained under identical dissolved oxygen (>6.5 mg⋅L−1> 6.5\text{ mg}\cdot\text{L}^{-1}) and temperature (20.0±0.5∘C20.0 \pm 0.5^\circ\text{C}). (a) Convert a water exposure concentration of 2.50 ppm2.50\text{ ppm} cadmium (atomic mass 112.41 g⋅mol−1112.41\text{ g}\cdot\text{mol}^{-1}, assuming solution density 1.00 g⋅mL−11.00\text{ g}\cdot\text{mL}^{-1}) into μmol⋅L−1\mu\text{mol}\cdot\text{L}^{-1} to three significant figures. (b) Identify the independent variable, the dependent variable, and the negative control group. (c) Distinguish whether the individual larva (N=120N = 120 per group) or the aquarium (n=6n = 6 per group) represents the true independent experimental repeat (replicate).

Answer and steps

Final answer

(a) 2.50 ppm=2.50 mg⋅L−1=2.50×10−3 g⋅L−1112.41 g⋅mol−1=2.224×10−5 mol⋅L−1=22.2 μmol⋅L−12.50\text{ ppm} = 2.50\text{ mg}\cdot\text{L}^{-1} = \frac{2.50\times 10^{-3}\text{ g}\cdot\text{L}^{-1}}{112.41\text{ g}\cdot\text{mol}^{-1}} = 2.224\times 10^{-5}\text{ mol}\cdot\text{L}^{-1} = 22.2\ \mu\text{mol}\cdot\text{L}^{-1}; (b) Independent variable: Cadmium concentration in water (ppm\text{ppm} or μmol⋅L−1\mu\text{mol}\cdot\text{L}^{-1}); Dependent variable: Larval tissue cadmium accumulation (μg⋅g−1\mu\text{g}\cdot\text{g}^{-1} dry weight); Negative control: The 0.00 ppm0.00\text{ ppm} cadmium exposure aquarium; (c) The aquarium (n=6n = 6) is the true independent experimental unit (replicate); individual larvae within the same tank share water chemistry and represent subsamples (pseudoreplicates).

Steps

Part (a): Concentration Unit Conversion

  1. Relate ppm\text{ppm} to mass per volume: Parts per million (ppm\text{ppm}) for dilute aqueous solutions represents 1 mg1\text{ mg} of solute per 1 kg1\text{ kg} of solution. Given a water density of 1.00 g⋅mL−11.00\text{ g}\cdot\text{mL}^{-1} (1.00 kg⋅L−11.00\text{ kg}\cdot\text{L}^{-1}): 2.50 ppm=2.50 mg⋅L−1=2.50×10−3 g⋅L−12.50\text{ ppm} = 2.50\text{ mg}\cdot\text{L}^{-1} = 2.50 \times 10^{-3}\text{ g}\cdot\text{L}^{-1}
  2. Convert mass concentration to molar concentration: Divide the mass concentration by the molar mass of cadmium (M=112.41 g⋅mol−1M = 112.41\text{ g}\cdot\text{mol}^{-1}): c=2.50×10−3 g⋅L−1112.41 g⋅mol−1≈2.2240×10−5 mol⋅L−1c = \frac{2.50 \times 10^{-3}\text{ g}\cdot\text{L}^{-1}}{112.41\text{ g}\cdot\text{mol}^{-1}} \approx 2.2240 \times 10^{-5}\text{ mol}\cdot\text{L}^{-1}
  3. Convert mol⋅L−1\text{mol}\cdot\text{L}^{-1} to μmol⋅L−1\mu\text{mol}\cdot\text{L}^{-1}: Since 1 mol=106 μmol1\text{ mol} = 10^6\ \mu\text{mol}: c=2.2240×10−5 mol⋅L−1×106 μmol⋅mol−1≈22.2 μmol⋅L−1c = 2.2240 \times 10^{-5}\text{ mol}\cdot\text{L}^{-1} \times 10^6\ \mu\text{mol}\cdot\text{mol}^{-1} \approx 22.2\ \mu\text{mol}\cdot\text{L}^{-1}

Part (b): Identifying Experimental Variables and Control

  • Independent Variable: The factor intentionally manipulated by the researcher across treatments, which is the cadmium concentration in the water (0.00 ppm0.00\text{ ppm}, 0.50 ppm0.50\text{ ppm}, and 2.50 ppm2.50\text{ ppm}, or in μmol⋅L−1\mu\text{mol}\cdot\text{L}^{-1}).
  • Dependent Variable: The factor measured to assess the effect of the treatment, which is the cadmium bioaccumulation in larval tissue (μg⋅(g dry weight)−1\mu\text{g}\cdot(\text{g dry weight})^{-1}).
  • Negative Control Group: The treatment group that receives zero exposure to the experimental agent to provide a baseline, which is the 0.00 ppm0.00\text{ ppm} cadmium exposure group (synthetic freshwater with no cadmium added).
  • Controlled Variables: Factors kept constant across all treatments to avoid confounding results, such as dissolved oxygen (>6.5 mg⋅L−1> 6.5\text{ mg}\cdot\text{L}^{-1}), temperature (20.0±0.5∘C20.0 \pm 0.5^\circ\text{C}), and duration (72 h72\text{ h}).

Part (c): Determining the True Independent Replicate

  • True Experimental Unit (Replicate): An experimental unit is the smallest physical entity that can be independently assigned to a treatment level. Because cadmium concentrations are applied per tank rather than to individual larvae, the aquarium (n=6n = 6 per group) is the true independent replicate.
  • Common Pitfall (Pseudoreplication): Treating the individual larvae (N=120N = 120 per group) as independent replicates is an error known as pseudoreplication. Larvae within the same aquarium share the same microenvironment, water chemistry, and potential tank-specific fluctuations; therefore, multiple larvae within a single tank are dependent subsamples (technical replicates), not independent experimental units.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student confuses true experimental units with sampling units (pseudoreplication), incorrectly concluding that individual larvae are independent replicates because measurements are taken on individual larvae.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    2.50 ppm=2.50 mg/L=2500 μg/L  ⟹  2500/112.41=22.2 μmol/L2.50\text{ ppm} = 2.50\text{ mg/L} = 2500\ \mu\text{g/L} \implies 2500 / 112.41 = 22.2\ \mu\text{mol/L}

  2. Step 2

    Independent variable: cadmium concentration Dependent variable: bioaccumulation in larval tissue Negative control: 0.00 ppm0.00\text{ ppm} cadmium group

  3. Step 3

    The individual larva (N=120N = 120 per group) represents the true independent replicate because bioaccumulation is measured separately in each larva.

    Correct

    The aquarium (n=6n = 6 per group) represents the true independent replicate. Individual larvae within the same aquarium share water chemistry and microenvironmental conditions, making them subsamples (pseudoreplicates) rather than independent experimental units.

    You confused the sampling unit with the experimental unit. Even though measurements are taken from each larva individually, the cadmium treatment was independently applied to the aquaria, not to individual larvae.

WHAT YOU DID WELL
Compliments from Your Teacher

You carried out the dimensional analysis and unit conversion accurately to three significant figures.

You correctly distinguished between the manipulated independent variable, the measured dependent variable, and the baseline negative control.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Pseudoreplication (confusing sampling units with experimental units)

You assumed that the unit of measurement (where data points are collected) is automatically the independent replicate.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

A true experimental unit (independent replicate) is the smallest physical entity independently allocated to a treatment level. Because all 2020 larvae in a tank share the exact same water, temperature, and microbial environment, their responses are correlated. Treating them as independent repeats inflates the sample size (N=120N = 120) and constitutes pseudoreplication; the true sample size is the number of independently treated aquaria (n=6n = 6).

REASONING PATH
Your ACEpath teacher’s suggested approach
Experimental Unit vs. Sampling Unit
  • An experimental unit is the physical entity receiving the treatment independently; a sampling unit is the entity from which a measurement is taken.

  • Always ask: 'At what level was the treatment independently applied?' That entity is your true replicate (nn).

Identifying Pseudoreplication
  • Multiple measurements taken from individuals sharing the same vessel, cage, pot, or enclosure are subsamples, not independent replicates.

  • Average or pool measurements within each independent enclosure, or use nested/mixed-model statistics rather than treating individuals as independent.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Determine the level of treatment application: Cadmium concentration is manipulated tank by tank, meaning each aquarium receives an independent water mixture.

  2. Assess independence of individuals: All 2020 larvae within a single tank share identical water chemistry, potential tank-specific pathogen exposure, and micro-fluctuations, so their responses are not statistically independent.

  3. Classify the units: The aquarium (n=6n = 6 per treatment) is the true experimental unit (replicate). The individual larvae (2020 per tank, N=120N = 120 per group) are sampling units (subsamples or pseudoreplicates).

Final answer

The aquarium (n=6n = 6 per group) is the true independent experimental replicate. The individual larvae are subsamples (pseudoreplicates) because they share the same aquarium environment and cannot vary independently.

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the distinction between 'experimental unit' and 'observational/sampling unit' in experimental design.

  • Practice identifying pseudoreplication in common biological setups such as petri dishes, animal cages, and plant pots.

OverviewACEpath Teacher's Diagnosis

02 The student misidentifies the 72 h exposure duration as the independent variable instead of the cadmium exposure concentration.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    2.50 ppm=2.50 mg/L=2500 μg/L  ⟹  2500/112.41=22.2 μmol/L2.50\text{ ppm} = 2.50\text{ mg/L} = 2500\ \mu\text{g/L} \implies 2500 / 112.41 = 22.2\ \mu\text{mol/L}

  2. Step 2

    Independent variable: exposure time of 72 h  ⟹  72\text{ h} \implies Dependent variable: bioaccumulation in larval tissue   ⟹  \implies Negative control: 0.00 ppm0.00\text{ ppm} cadmium group

    Correct

    Independent variable: Cadmium concentration in water (0.00 ppm0.00\text{ ppm}, 0.50 ppm0.50\text{ ppm}, 2.50 ppm2.50\text{ ppm}); Dependent variable: Bioaccumulation in larval tissue; Negative control: 0.00 ppm0.00\text{ ppm} cadmium exposure group

    The exposure duration of 72 h72\text{ h} was held constant across all treatments, which makes it a controlled variable. The factor intentionally manipulated across groups was the cadmium concentration in the water.

  3. Step 3

    The aquarium represents the true independent replicate because treatments are applied to each tank independently, making larvae within a tank pseudoreplicates.

WHAT YOU DID WELL
Compliments from Your Teacher

You performed the unit conversion from ppm\text{ppm} to μmol⋅L−1\mu\text{mol}\cdot\text{L}^{-1} cleanly and rounded correctly to three significant figures.

You correctly identified cadmium bioaccumulation as the dependent variable and the 0.00 ppm0.00\text{ ppm} group as the negative baseline control.

You clearly articulated the distinction between the true experimental unit (aquarium) and pseudoreplicates (individual larvae).

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Misidentifying a controlled condition as the independent variable

You listed the fixed exposure duration of 72 h72\text{ h} as the variable being tested.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused a standardized experimental parameter (a controlled variable fixed across all test groups) with the independent variable, which must be the treatment factor intentionally changed or compared between test groups.

REASONING PATH
Your ACEpath teacher’s suggested approach
Independent vs. Controlled Variable Check
  • The independent variable must differ systematically across treatment groups, whereas controlled variables are kept identical across all groups.

  • Scan the experiment for values that change across treatment groups (0.000.00, 0.500.50, and 2.50 ppm2.50\text{ ppm}) rather than parameters that remain fixed (72 h72\text{ h}, 20∘C20^\circ\text{C}).

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Ask what factor the experimenter systematically changed between the test groups: the nominal water concentrations were 0.00 ppm0.00\text{ ppm}, 0.50 ppm0.50\text{ ppm}, and 2.50 ppm2.50\text{ ppm}.

  2. Confirm that 72 h72\text{ h}, temperature, and dissolved oxygen were identical across all groups and therefore represent controlled variables.

  3. State the independent variable as the cadmium exposure concentration in water.

Final answer

Independent variable: Cadmium concentration in water (0.00 ppm0.00\text{ ppm}, 0.50 ppm0.50\text{ ppm}, 2.50 ppm2.50\text{ ppm}); Dependent variable: Bioaccumulation in larval tissue; Negative control: 0.00 ppm0.00\text{ ppm} cadmium group.

NEXT STEPS
Final Takeaways from Your Teacher
  • Before writing down the independent variable, list the distinct treatment groups and note which single factor differs among them.

  • Label any fixed duration, temperature, or feeding regimen as a controlled variable to prevent misassigning it as an experimental factor.

OverviewACEpath Teacher's Diagnosis

03 The student forgets to convert milligrams to micrograms or grams before dividing by molar mass, leading to a molar concentration that is off by a factor of 1000.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    2.50 ppm=2.50 mg/L  ⟹  2.50/112.41=0.0222 μmol/L2.50\text{ ppm} = 2.50\text{ mg/L} \implies 2.50 / 112.41 = 0.0222\ \mu\text{mol/L}

    Correct

    2.50×10−3 g⋅L−1112.41 g⋅mol−1=2.224×10−5 mol⋅L−1=22.2 μmol⋅L−1\frac{2.50\times 10^{-3}\text{ g}\cdot\text{L}^{-1}}{112.41\text{ g}\cdot\text{mol}^{-1}} = 2.224\times 10^{-5}\text{ mol}\cdot\text{L}^{-1} = 22.2\ \mu\text{mol}\cdot\text{L}^{-1}

    You correctly related 2.50 ppm2.50\text{ ppm} to 2.50 mg⋅L−12.50\text{ mg}\cdot\text{L}^{-1} and divided by the molar mass 112.41 g⋅mol−1112.41\text{ g}\cdot\text{mol}^{-1}. However, dividing mg⋅L−1\text{mg}\cdot\text{L}^{-1} by g⋅mol−1\text{g}\cdot\text{mol}^{-1} gives mmol⋅L−1\text{mmol}\cdot\text{L}^{-1} (0.02224 mmol⋅L−10.02224\text{ mmol}\cdot\text{L}^{-1}), not μmol⋅L−1\mu\text{mol}\cdot\text{L}^{-1}. Converting millimoles to micromoles requires multiplying by 103 μmol⋅mmol−110^3\ \mu\text{mol}\cdot\text{mmol}^{-1}, yielding 22.2 μmol⋅L−122.2\ \mu\text{mol}\cdot\text{L}^{-1}.

  2. Step 2

    Independent variable: cadmium exposure concentration  ⟹  Dependent variable: bioaccumulation in larval tissue  ⟹  Negative control: 0.00 ppm cadmium group\text{Independent variable: cadmium exposure concentration} \implies \text{Dependent variable: bioaccumulation in larval tissue} \implies \text{Negative control: } 0.00\text{ ppm cadmium group}

  3. Step 3

    The aquarium represents the true independent replicate because larvae in the same tank share environmental conditions and are pseudoreplicates.\text{The aquarium represents the true independent replicate because larvae in the same tank share environmental conditions and are pseudoreplicates.}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly equated parts per million (ppm\text{ppm}) to mg⋅L−1\text{mg}\cdot\text{L}^{-1} for dilute aqueous solutions.

You accurately identified the independent variable, dependent variable, and negative control group.

You demonstrated clear mastery of replication and correctly identified the aquarium as the true experimental unit to avoid pseudoreplication.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Dimensional Analysis Unit Prefix Mismatch

You divided a mass in milligrams directly by a molar mass in grams per mole and wrote the unit as μmol⋅L−1\mu\text{mol}\cdot\text{L}^{-1} instead of mmol⋅L−1\text{mmol}\cdot\text{L}^{-1}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Incomplete dimensional tracking during metric prefix conversions, specifically conflating millimoles (10−3 mol10^{-3}\text{ mol}) with micromoles (10−6 mol10^{-6}\text{ mol}).

REASONING PATH
Your ACEpath teacher’s suggested approach
Track Units Explicitly in the Quotient
  • mgg⋅mol−1=10−3 gg⋅mol−1=10−3 mol=1 mmol\frac{\text{mg}}{\text{g}\cdot\text{mol}^{-1}} = \frac{10^{-3}\text{ g}}{\text{g}\cdot\text{mol}^{-1}} = 10^{-3}\text{ mol} = 1\text{ mmol}

  • Always write out numerator and denominator units fully or convert all quantities to standard SI units (grams and moles) before calculating.

Convert Prefixes Systematically
  • 1 mmol=103 μmol1\text{ mmol} = 10^3\ \mu\text{mol}

  • Multiply millimoles by 10310^3 to obtain micromoles.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Express mass concentration in base units: 2.50 mg⋅L−1=2.50×10−3 g⋅L−12.50\text{ mg}\cdot\text{L}^{-1} = 2.50 \times 10^{-3}\text{ g}\cdot\text{L}^{-1}.

  2. Divide by molar mass: c=2.50×10−3 g⋅L−1112.41 g⋅mol−1=2.2240×10−5 mol⋅L−1c = \frac{2.50 \times 10^{-3}\text{ g}\cdot\text{L}^{-1}}{112.41\text{ g}\cdot\text{mol}^{-1}} = 2.2240 \times 10^{-5}\text{ mol}\cdot\text{L}^{-1}.

  3. Convert moles to micromoles: 2.2240×10−5 mol⋅L−1×106 μmol⋅mol−1=22.2 μmol⋅L−12.2240 \times 10^{-5}\text{ mol}\cdot\text{L}^{-1} \times 10^6\ \mu\text{mol}\cdot\text{mol}^{-1} = 22.2\ \mu\text{mol}\cdot\text{L}^{-1}.

Final answer

(a) 22.2 μmol⋅L−122.2\ \mu\text{mol}\cdot\text{L}^{-1}; (b) Independent variable: Cadmium concentration in water; Dependent variable: Cadmium bioaccumulation in larval tissue; Negative control: 0.00 ppm0.00\text{ ppm} cadmium exposure group; (c) Aquarium (n=6n = 6 per group) is the true independent replicate.

NEXT STEPS
Final Takeaways from Your Teacher
  • Review prefix relationships between grams (g\text{g}), milligrams (mg\text{mg}), moles (mol\text{mol}), millimoles (mmol\text{mmol}), and micromoles (μmol\mu\text{mol}).

  • Practice factor-label dimensional analysis by writing out units with cancelling diagonal lines.

Lock it in

Similar question

01

A plant biologist tests a new fertilizer on tomato growth. She prepares 44 growth chambers: 22 receive standard soil, and 22 receive fertilizer-enriched soil. Each chamber contains 2525 potted tomato plants. State the independent variable and determine the number of true independent replicates (nn) per treatment.

Answer

Independent variable: Fertilizer treatment (standard vs. enriched soil). True replicates per treatment: n=2n = 2 (the growth chambers). Even though each plant is in its own pot, all 2525 plants share chamber-level environmental conditions (lighting, airflow, humidity), so the chamber is the level of independent treatment assignment.

02

In a toxicology trial, 33 tanks of zebrafish embryos are exposed to a pesticide and 33 tanks serve as controls. Each tank contains 5050 embryos. A researcher calculates mortality using N=150N = 150 embryos per group for a two-sample t-test. Explain why this statistical approach is invalid and state the correct sample size to use.

Answer

The approach commits pseudoreplication because embryos within the same tank share water chemistry and are not statistically independent. The correct sample size is n=3n = 3 tanks per group (using the mean mortality rate of each tank as a single data point).

03

An investigator tests whether an organic solvent increases membrane permeability in beet cells. She places 1010 identical beetroot discs into a single beaker containing 10% ethanol10\%\text{ ethanol} and another 1010 discs into a single beaker of distilled water. After 1 h1\text{ h}, she measures absorbance of the bathing solution for each disc. Identify two critical flaws in this experimental design and explain how to correct them.

Answer

Flaw 1: Pseudoreplication (n=1n = 1 beaker per treatment; individual discs in the same beaker do not represent independent replicates). Flaw 2: Lack of true replication makes it impossible to distinguish treatment effects from random beaker-level artifacts. Correction: Prepare multiple separate beakers (e.g., n=5n = 5 beakers per treatment), each containing one or more discs, treating each beaker as one replicate.

Loading workspace…