Resources

An industrial bioreactor contains 0.250 mg0.250\text{ mg} of pure carbonic anhydrase (molecular weight Mr=30,000 g/molM_r = 30{,}000\text{ g/mol}) dissolved in a total volume of 10.0 mL10.0\text{ mL}. Under fully saturating carbon dioxide conditions, the system converts substrate at a maximum rate of Vmax⁡=3.33×10−2 mol/(L⋅s)V_{\max} = 3.33\times 10^{-2}\text{ mol}/(\text{L}\cdot\text{s}). Coupling the structural quantity of the enzyme with its catalytic performance, calculate: (a) the molar concentration of the enzyme [E]t[\text{E}]_t in the assay, and (b) the turnover number (catalytic constant kcatk_{\text{cat}}) of the enzyme in s−1\text{s}^{-1}.

Answer and steps

Final answer

(a) [E]t=8.33×10−7 M[\text{E}]_t = 8.33\times 10^{-7}\text{ M}; (b) kcat=4.00×104 s−1k_{\text{cat}} = 4.00\times 10^4\text{ s}^{-1}

Steps

Part (a): Determining the Molar Concentration of the Enzyme, [E]t[\text{E}]_t

  1. Convert the given mass into grams and the volume into liters:

    • Enzyme mass, m=0.250 mg=2.50×10−4 gm = 0.250\text{ mg} = 2.50 \times 10^{-4}\text{ g}
    • Solution volume, V=10.0 mL=1.00×10−2 LV = 10.0\text{ mL} = 1.00 \times 10^{-2}\text{ L}
  2. Calculate the amount of enzyme in moles (nn): The number of moles is the mass divided by the molar mass (MrM_r): n=mMr=2.50×10−4 g30,000 g/mol=8.333×10−9 moln = \frac{m}{M_r} = \frac{2.50 \times 10^{-4}\text{ g}}{30{,}000\text{ g/mol}} = 8.333 \times 10^{-9}\text{ mol}
  3. Calculate the total enzyme concentration ([E]t[\text{E}]_t): Molar concentration is defined as moles of solute per liter of solution: [E]t=nV=8.333×10−9 mol1.00×10−2 L=8.33×10−7 M[\text{E}]_t = \frac{n}{V} = \frac{8.333 \times 10^{-9}\text{ mol}}{1.00 \times 10^{-2}\text{ L}} = 8.33 \times 10^{-7}\text{ M}

Part (b): Calculating the Turnover Number (kcatk_{\text{cat}})

  1. Relate Vmax⁡V_{\max} to the catalytic constant (kcatk_{\text{cat}}): Under saturating substrate conditions, every active site is fully engaged in catalysis. The maximum rate of reaction, Vmax⁡V_{\max}, is directly proportional to the total enzyme concentration [E]t[\text{E}]_t via the turnover number kcatk_{\text{cat}}: Vmax⁡=kcat[E]tV_{\max} = k_{\text{cat}}[\text{E}]_t
  2. Solve for kcatk_{\text{cat}}: Rearranging for kcatk_{\text{cat}} yields: kcat=Vmax⁡[E]tk_{\text{cat}} = \frac{V_{\max}}{[\text{E}]_t}
  3. Substitute the known values: kcat=3.33×10−2 mol/(L⋅s)8.333×10−7 mol/L=4.00×104 s−1k_{\text{cat}} = \frac{3.33 \times 10^{-2}\text{ mol}/(\text{L}\cdot\text{s})}{8.333 \times 10^{-7}\text{ mol/L}} = 4.00 \times 10^4\text{ s}^{-1}

Common Pitfall: Ensure consistent units before dividing. Because Vmax⁡V_{\max} is expressed in mol/(L⋅s)\text{mol}/(\text{L}\cdot\text{s}), the enzyme concentration [E]t[\text{E}]_t must be in mol/L\text{mol/L} (molarity, M\text{M}) so that the concentration units cancel, leaving kcatk_{\text{cat}} with the correct frequency unit of s−1\text{s}^{-1}.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets to convert milligrams to grams when calculating the moles of enzyme, overestimating [E]_t by a factor of 1000 and underestimating k_cat by the same factor.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    n=0.25030,000=8.33×10−6 moln = \frac{0.250}{30{,}000} = 8.33 \times 10^{-6}\text{ mol}

    Correct

    n=mMr=2.50×10−4 g30,000 g/mol=8.33×10−9 moln = \frac{m}{M_r} = \frac{2.50 \times 10^{-4}\text{ g}}{30{,}000\text{ g/mol}} = 8.33 \times 10^{-9}\text{ mol}

    You substituted the mass as 0.2500.250 directly into the formula, but the mass was given in milligrams (mg\text{mg}) while the molar mass is in grams per mole (g/mol\text{g/mol}). You must convert 0.250 mg0.250\text{ mg} to 2.50×10−4 g2.50 \times 10^{-4}\text{ g} before dividing.

  2. Step 2

    V=10.0 mL=0.0100 L  ⟹  [E]t=8.33×10−6 mol0.0100 L=8.33×10−4 mol/LV = 10.0\text{ mL} = 0.0100\text{ L} \implies [\text{E}]_t = \frac{8.33 \times 10^{-6}\text{ mol}}{0.0100\text{ L}} = 8.33 \times 10^{-4}\text{ mol/L}

    Correct

    [E]t=nV=8.33×10−9 mol0.0100 L=8.33×10−7 M[\text{E}]_t = \frac{n}{V} = \frac{8.33 \times 10^{-9}\text{ mol}}{0.0100\text{ L}} = 8.33 \times 10^{-7}\text{ M}

    You converted milliliters to liters and applied the molarity formula correctly, but this step inherited the overestimated mole value from Step 1.

  3. Step 3

    kcat=Vmax⁡[E]t=3.33×10−2 mol/(L⋅s)8.33×10−4 mol/L=40.0 s−1k_{\text{cat}} = \frac{V_{\max}}{[\text{E}]_t} = \frac{3.33 \times 10^{-2}\text{ mol}/(\text{L}\cdot\text{s})}{8.33 \times 10^{-4}\text{ mol/L}} = 40.0\text{ s}^{-1}

    Correct

    kcat=Vmax⁡[E]t=3.33×10−2 mol/(L⋅s)8.33×10−7 mol/L=4.00×104 s−1k_{\text{cat}} = \frac{V_{\max}}{[\text{E}]_t} = \frac{3.33 \times 10^{-2}\text{ mol}/(\text{L}\cdot\text{s})}{8.33 \times 10^{-7}\text{ mol/L}} = 4.00 \times 10^4\text{ s}^{-1}

    You correctly recalled and rearranged the relationship Vmax⁡=kcat[E]tV_{\max} = k_{\text{cat}}[\text{E}]_t, but using the inflated concentration led to a turnover number that was off by a factor of 10001000.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly converted the assay volume from milliliters to liters (10.0 mL=0.0100 L10.0\text{ mL} = 0.0100\text{ L}).

You correctly used the definition of molarity [E]t=nV[\text{E}]_t = \frac{n}{V}.

You correctly applied the relationship Vmax⁡=kcat[E]tV_{\max} = k_{\text{cat}}[\text{E}]_t to solve for the turnover number.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Unit conversion error (mass prefix)

You forgot to convert 0.250 mg0.250\text{ mg} into grams before dividing by the molar mass in g/mol\text{g/mol}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

In dimensional analysis, molar mass has units of g/mol\text{g/mol}, which requires solute mass to be expressed in grams (g\text{g}). Omitting the prefix conversion 1 mg=10−3 g1\text{ mg} = 10^{-3}\text{ g} causes an overestimation of chemical quantity by 10310^3.

REASONING PATH
Your ACEpath teacher’s suggested approach
Match Mass Units to Molar Mass
  • Before calculating moles via n=mMrn = \frac{m}{M_r}, ensure that mm and MrM_r share the same mass unit (grams with g/mol\text{g/mol}, or milligrams with mg/mmol\text{mg/mmol}).

  • Write out the conversion factor explicitly: 0.250 mg×10−3 g1 mg=2.50×10−4 g0.250\text{ mg} \times \frac{10^{-3}\text{ g}}{1\text{ mg}} = 2.50 \times 10^{-4}\text{ g}.

Biological Plausibility Check for $k_{\text{cat}}$
  • Carbonic anhydrase is one of the fastest known enzymes, with turnover numbers typically between 104 s−110^4\text{ s}^{-1} and 106 s−110^6\text{ s}^{-1}.

  • If a calculation yields an extraordinarily low turnover number such as 40 s−140\text{ s}^{-1} for carbonic anhydrase, check whether the enzyme concentration was overestimated due to a missing prefix conversion.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert the enzyme mass to grams: m=0.250 mg=2.50×10−4 gm = 0.250\text{ mg} = 2.50 \times 10^{-4}\text{ g}.

  2. Calculate moles: n=2.50×10−4 g30,000 g/mol=8.333×10−9 moln = \frac{2.50 \times 10^{-4}\text{ g}}{30{,}000\text{ g/mol}} = 8.333 \times 10^{-9}\text{ mol}.

  3. Calculate enzyme molarity: [E]t=8.333×10−9 mol0.0100 L=8.33×10−7 M[\text{E}]_t = \frac{8.333 \times 10^{-9}\text{ mol}}{0.0100\text{ L}} = 8.33 \times 10^{-7}\text{ M}.

  4. Calculate turnover number: kcat=Vmax⁡[E]t=3.33×10−2 mol/(L⋅s)8.333×10−7 mol/L=4.00×104 s−1k_{\text{cat}} = \frac{V_{\max}}{[\text{E}]_t} = \frac{3.33 \times 10^{-2}\text{ mol}/(\text{L}\cdot\text{s})}{8.333 \times 10^{-7}\text{ mol/L}} = 4.00 \times 10^4\text{ s}^{-1}.

Final answer

(a) [E]t=8.33×10−7 M[\text{E}]_t = 8.33 \times 10^{-7}\text{ M}; (b) kcat=4.00×104 s−1k_{\text{cat}} = 4.00 \times 10^4\text{ s}^{-1}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice converting metric mass prefixes (μg\mu\text{g}, mg\text{mg}) to grams as the very first step in stoichiometry problems.

  • Always write units alongside numbers during intermediate division steps so mismatches like mg/(g/mol)\text{mg} / (\text{g/mol}) become immediately visible.

OverviewACEpath Teacher's Diagnosis

02 The student forgets to convert the assay volume from milliliters to liters when calculating molarity, resulting in an enzyme concentration that is 1000-fold too small and a turnover number that is 1000-fold too large.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    m=0.250 mg=2.50×10−4 g  ⟹  n=2.50×10−4 g30000 g/mol=8.33×10−9 molm = 0.250\text{ mg} = 2.50 \times 10^{-4}\text{ g} \implies n = \frac{2.50 \times 10^{-4}\text{ g}}{30000\text{ g/mol}} = 8.33 \times 10^{-9}\text{ mol}

  2. Step 2

    [E]t=8.33×10−9 mol10.0=8.33×10−10 mol/L[\text{E}]_t = \frac{8.33 \times 10^{-9}\text{ mol}}{10.0} = 8.33 \times 10^{-10}\text{ mol/L}

    Correct

    [E]t=nV=8.333×10−9 mol1.00×10−2 L=8.33×10−7 M[\text{E}]_t = \frac{n}{V} = \frac{8.333 \times 10^{-9}\text{ mol}}{1.00 \times 10^{-2}\text{ L}} = 8.33 \times 10^{-7}\text{ M}

    You divided the moles by 10.0 mL10.0\text{ mL} directly without converting the volume to liters (10.0 mL=0.0100 L10.0\text{ mL} = 0.0100\text{ L}). Because molarity is defined as moles per liter, your resulting concentration is a factor of 10001000 too small.

  3. Step 3

    kcat=Vmax⁡[E]t  ⟹  kcat=3.33×10−2 mol/(L⋅s)8.33×10−10 mol/L=4.00×107 s−1k_{\text{cat}} = \frac{V_{\max}}{[\text{E}]_t} \implies k_{\text{cat}} = \frac{3.33 \times 10^{-2}\text{ mol}/(\text{L}\cdot\text{s})}{8.33 \times 10^{-10}\text{ mol/L}} = 4.00 \times 10^7\text{ s}^{-1}

    Correct

    kcat=Vmax⁡[E]t=3.33×10−2 mol/(L⋅s)8.333×10−7 mol/L=4.00×104 s−1k_{\text{cat}} = \frac{V_{\max}}{[\text{E}]_t} = \frac{3.33 \times 10^{-2}\text{ mol}/(\text{L}\cdot\text{s})}{8.333 \times 10^{-7}\text{ mol/L}} = 4.00 \times 10^4\text{ s}^{-1}

    You correctly applied the catalytic relationship Vmax⁡=kcat[E]tV_{\max} = k_{\text{cat}}[\text{E}]_t and rearranged for kcatk_{\text{cat}}, but substituting the understated concentration from Step 2 made your turnover number 10001000 times too large.

WHAT YOU DID WELL
Compliments from Your Teacher

You converted enzyme mass from milligrams to grams correctly.

You determined the moles of enzyme accurately using its molar mass.

You correctly identified and applied the relationship Vmax⁡=kcat[E]tV_{\max} = k_{\text{cat}}[\text{E}]_t to solve for turnover number.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Unit Conversion Error in Solution Volume

You substituted the volume directly as 10.010.0 instead of 10.0×10−3 L10.0 \times 10^{-3}\text{ L} (0.0100 L0.0100\text{ L}).

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Treating milliliter values as liter quantities when solving for molarity (extmol/L ext{mol/L}) leads to an enzyme concentration that is off by three orders of magnitude.

REASONING PATH
Your ACEpath teacher’s suggested approach
Molarity Definition
  • Molar concentration [E]t[\text{E}]_t requires volume in liters: [E]t=n (mol)V (L)[\text{E}]_t = \frac{n\text{ (mol)}}{V\text{ (L)}}.

  • Always explicitly write down the unit conversion V=10.0 mL=1.00×10−2 LV = 10.0\text{ mL} = 1.00 \times 10^{-2}\text{ L} before substituting into concentration formulas.

Dimensional Consistency in Enzyme Kinetics
  • For kcat=Vmax⁡[E]tk_{\text{cat}} = \frac{V_{\max}}{[\text{E}]_t} to yield s−1\text{s}^{-1}, the concentration units of [E]t[\text{E}]_t must match the volume base of Vmax⁡V_{\max} (mol/(L⋅s)\text{mol}/(\text{L}\cdot\text{s}) vs. mol/L\text{mol/L}).

  • Cancel units explicitly: mol⋅L−1⋅s−1mol⋅L−1=s−1\frac{\text{mol}\cdot\text{L}^{-1}\cdot\text{s}^{-1}}{\text{mol}\cdot\text{L}^{-1}} = \text{s}^{-1}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert assay volume: V=10.0 mL=1.00×10−2 LV = 10.0\text{ mL} = 1.00 \times 10^{-2}\text{ L}.

  2. Compute molar concentration: [E]t=8.333×10−9 mol1.00×10−2 L=8.33×10−7 M[\text{E}]_t = \frac{8.333 \times 10^{-9}\text{ mol}}{1.00 \times 10^{-2}\text{ L}} = 8.33 \times 10^{-7}\text{ M}.

  3. Compute turnover number: kcat=Vmax⁡[E]t=3.33×10−2 mol/(L⋅s)8.333×10−7 mol/L=4.00×104 s−1k_{\text{cat}} = \frac{V_{\max}}{[\text{E}]_t} = \frac{3.33 \times 10^{-2}\text{ mol}/(\text{L}\cdot\text{s})}{8.333 \times 10^{-7}\text{ mol/L}} = 4.00 \times 10^4\text{ s}^{-1}.

Final answer

(a) [E]t=8.33×10−7 M[\text{E}]_t = 8.33 \times 10^{-7}\text{ M}; (b) kcat=4.00×104 s−1k_{\text{cat}} = 4.00 \times 10^4\text{ s}^{-1}

NEXT STEPS
Final Takeaways from Your Teacher
  • Write units alongside every numerical substitution to catch uncoverted metric prefixes like milliliters or milligrams.

  • Verify that physiological and industrial enzyme turnover numbers typically range between 101 s−110^1\text{ s}^{-1} and 106 s−110^6\text{ s}^{-1}; an extreme value like 107 s−110^7\text{ s}^{-1} should prompt a volume unit check.

OverviewACEpath Teacher's Diagnosis

03 The student misremembers the turnover relationship as a product rather than a quotient, multiplying V_max by [E]_t to solve for k_cat.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    m=0.250 mg=2.50×10−4 g  ⟹  n=2.50×10−4 g30000 g/mol=8.33×10−9 molm = 0.250\text{ mg} = 2.50 \times 10^{-4}\text{ g} \implies n = \frac{2.50 \times 10^{-4}\text{ g}}{30000\text{ g/mol}} = 8.33 \times 10^{-9}\text{ mol}

  2. Step 2

    V=10.0 mL=0.0100 L  ⟹  [E]t=8.33×10−9 mol0.0100 L=8.33×10−7 mol/LV = 10.0\text{ mL} = 0.0100\text{ L} \implies [\text{E}]_t = \frac{8.33 \times 10^{-9}\text{ mol}}{0.0100\text{ L}} = 8.33 \times 10^{-7}\text{ mol/L}

  3. Step 3

    kcat=Vmax⁡×[E]t=(3.33×10−2 mol/(L⋅s))×(8.33×10−7 mol/L)=2.77×10−8 s−1k_{\text{cat}} = V_{\max} \times [\text{E}]_t = (3.33 \times 10^{-2}\text{ mol}/(\text{L}\cdot\text{s})) \times (8.33 \times 10^{-7}\text{ mol/L}) = 2.77 \times 10^{-8}\text{ s}^{-1}

    Correct

    kcat=Vmax⁡[E]t=3.33×10−2 mol/(L⋅s)8.333×10−7 mol/L=4.00×104 s−1k_{\text{cat}} = \frac{V_{\max}}{[\text{E}]_t} = \frac{3.33 \times 10^{-2}\text{ mol}/(\text{L}\cdot\text{s})}{8.333 \times 10^{-7}\text{ mol/L}} = 4.00 \times 10^4\text{ s}^{-1}

    You multiplied Vmax⁡V_{\max} by [E]t[\text{E}]_t instead of dividing. Under saturating substrate conditions, Vmax⁡=kcat[E]tV_{\max} = k_{\text{cat}}[\text{E}]_t, which rearranges to kcat=Vmax⁡[E]tk_{\text{cat}} = \frac{V_{\max}}{[\text{E}]_t}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly converted metric prefixes for mass and volume into SI base units.

You calculated the molar amount and molar concentration of the enzyme accurately.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Algebraic rearrangement error in rate equation

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You recalled the turnover formula as a product (kcat=Vmax⁡⋅[E]tk_{\text{cat}} = V_{\max} \cdot [\text{E}]_t) rather than algebraically isolating kcatk_{\text{cat}} from the defining relationship Vmax⁡=kcat[E]tV_{\max} = k_{\text{cat}}[\text{E}]_t.

REASONING PATH
Your ACEpath teacher’s suggested approach
Relate $V_{\max}$ and $k_{\text{cat}}$
  • Vmax⁡=kcat[E]tV_{\max} = k_{\text{cat}}[\text{E}]_t

  • Write down the primary rate equation first, then isolate kcatk_{\text{cat}} by dividing both sides by [E]t[\text{E}]_t.

Dimensional Analysis Verification
  • mol/(L⋅s)mol/L=s−1\frac{\text{mol}/(\text{L}\cdot\text{s})}{\text{mol}/\text{L}} = \text{s}^{-1}

  • Check your units: multiplying two concentration terms yields mol2/(L2⋅s)\text{mol}^2/(\text{L}^2\cdot\text{s}), whereas dividing cancels molarity to yield frequency (s−1\text{s}^{-1}). balance.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Use the relationship between maximum velocity and enzyme concentration: Vmax⁡=kcat[E]tV_{\max} = k_{\text{cat}}[\text{E}]_t.

  2. Rearrange the formula to isolate kcatk_{\text{cat}}: kcat=Vmax⁡[E]tk_{\text{cat}} = \frac{V_{\max}}{[\text{E}]_t}.

  3. Substitute the known values: kcat=3.33×10−2 mol/(L⋅s)8.333×10−7 mol/L=4.00×104 s−1k_{\text{cat}} = \frac{3.33 \times 10^{-2}\text{ mol}/(\text{L}\cdot\text{s})}{8.333 \times 10^{-7}\text{ mol/L}} = 4.00 \times 10^4\text{ s}^{-1}.

Final answer

(a) [E]t=8.33×10−7 M[\text{E}]_t = 8.33 \times 10^{-7}\text{ M}; (b) kcat=4.00×104 s−1k_{\text{cat}} = 4.00 \times 10^4\text{ s}^{-1}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always write out the fundamental definition Vmax⁡=kcat[E]tV_{\max} = k_{\text{cat}}[\text{E}]_t before rearranging for an unknown.

  • Perform unit dimensional analysis on your algebraic expression to ensure the final units match s−1\text{s}^{-1}.

Lock it in

Similar question

01

An enzyme assay contains 0.120 mg0.120\text{ mg} of catalase (Mr=240,000 g/molM_r = 240{,}000\text{ g/mol}) dissolved in 2.00 mL2.00\text{ mL} of buffer. Calculate the molar concentration of the enzyme [E]t[\text{E}]_t.

Answer

[E]t=2.50×10−7 M[\text{E}]_t = 2.50 \times 10^{-7}\text{ M}. Key steps: m=0.120 mg=1.20×10−4 gm = 0.120\text{ mg} = 1.20 \times 10^{-4}\text{ g}; n=1.20×10−4 g240,000 g/mol=5.00×10−10 moln = \frac{1.20 \times 10^{-4}\text{ g}}{240{,}000\text{ g/mol}} = 5.00 \times 10^{-10}\text{ mol}; V=2.00 mL=2.00×10−3 LV = 2.00\text{ mL} = 2.00 \times 10^{-3}\text{ L}; [E]t=5.00×10−10 mol2.00×10−3 L=2.50×10−7 M[\text{E}]_t = \frac{5.00 \times 10^{-10}\text{ mol}}{2.00 \times 10^{-3}\text{ L}} = 2.50 \times 10^{-7}\text{ M}.

02

A 5.0 mL5.0\text{ mL} reaction mixture has an enzyme concentration of [E]t=2.0×10−8 M[\text{E}]_t = 2.0 \times 10^{-8}\text{ M}. When fully saturated with substrate, the maximal velocity is Vmax⁡=1.6×10−3 mol/(L⋅s)V_{\max} = 1.6 \times 10^{-3}\text{ mol}/(\text{L}\cdot\text{s}). Determine the turnover number kcatk_{\text{cat}} of the enzyme.

Answer

kcat=8.0×104 s−1k_{\text{cat}} = 8.0 \times 10^4\text{ s}^{-1}. Key steps: Under saturating substrate conditions, Vmax⁡=kcat[E]tV_{\max} = k_{\text{cat}}[\text{E}]_t; kcat=Vmax⁡[E]t=1.6×10−3 mol/(L⋅s)2.0×10−8 mol/L=8.0×104 s−1k_{\text{cat}} = \frac{V_{\max}}{[\text{E}]_t} = \frac{1.6 \times 10^{-3}\text{ mol}/(\text{L}\cdot\text{s})}{2.0 \times 10^{-8}\text{ mol/L}} = 8.0 \times 10^4\text{ s}^{-1}.

03

A purified preparation of fumarase (Mr=194,000 g/molM_r = 194{,}000\text{ g/mol}) is assayed. A 25.0 μg25.0\ \mu\text{g} sample of the enzyme in a 50.0 mL50.0\text{ mL} cuvette exhibits a maximum velocity of Vmax⁡=2.06×10−4 mol/(L⋅s)V_{\max} = 2.06 \times 10^{-4}\text{ mol}/(\text{L}\cdot\text{s}). Calculate: (a) [E]t[\text{E}]_t in M\text{M}, and (b) kcatk_{\text{cat}} in s−1\text{s}^{-1}.

Answer

(a) [E]t=2.58×10−9 M[\text{E}]_t = 2.58 \times 10^{-9}\text{ M}; (b) kcat=8.00×104 s−1k_{\text{cat}} = 8.00 \times 10^4\text{ s}^{-1}. Key steps: m=25.0 μg=2.50×10−5 gm = 25.0\ \mu\text{g} = 2.50 \times 10^{-5}\text{ g}; n=2.50×10−5 g194,000 g/mol=1.289×10−10 moln = \frac{2.50 \times 10^{-5}\text{ g}}{194{,}000\text{ g/mol}} = 1.289 \times 10^{-10}\text{ mol}; [E]t=1.289×10−10 mol0.0500 L=2.58×10−9 M[\text{E}]_t = \frac{1.289 \times 10^{-10}\text{ mol}}{0.0500\text{ L}} = 2.58 \times 10^{-9}\text{ M}; kcat=Vmax⁡[E]t=2.06×10−4 mol/(L⋅s)2.58×10−9 mol/L=8.00×104 s−1k_{\text{cat}} = \frac{V_{\max}}{[\text{E}]_t} = \frac{2.06 \times 10^{-4}\text{ mol}/(\text{L}\cdot\text{s})}{2.58 \times 10^{-9}\text{ mol/L}} = 8.00 \times 10^4\text{ s}^{-1}.

Loading workspace…