Resources

A marine invertebrate researcher standardizes the excretion rate of nitrogenous metabolic end-products across three adult specimens belonging to three distinct phyla. The daily excretion volumes and concentrations are measured as follows:

  • Specimen 1 (Planarian, phylum Platyhelminthes, wet mass m1=0.20 gm_1 = 0.20\text{ g}): excretes 150 μL150\ \mu\text{L} of hypoosmotic fluid daily at an ammonia concentration of 1.2×10−4 M1.2\times 10^{-4}\text{ M}.
  • Specimen 2 (Earthworm, phylum Annelida, wet mass m2=4.0 gm_2 = 4.0\text{ g}): excretes 2.5 mL2.5\text{ mL} of fluid daily via metanephridia containing urea at 18 mg/L18\text{ mg/L} (Murea=60.06 g/molM_{\text{urea}} = 60.06\text{ g/mol}).
  • Specimen 3 (Grasshopper, phylum Arthropoda, dry waste mass m3=1.5 gm_3 = 1.5\text{ g}): excretes 12 mg12\text{ mg} of dry solid uric acid paste daily via Malpighian tubules containing 70%70\% pure uric acid by mass (Muric acid=168.11 g/molM_{\text{uric acid}} = 168.11\text{ g/mol}). Convert and calculate the absolute nitrogen output in micromoles of atomic nitrogen (μmol N\mu\text{mol N}) excreted per day for each specimen. (Note: Ammonia =NH3= \text{NH}_3, Urea =CO(NH2)2= \text{CO}(\text{NH}_2)_2, Uric acid =C5H4N4O3= \text{C}_5\text{H}_4\text{N}_4\text{O}_3).

Answer and steps

Final answer

Specimen 1: 1.8×10−2 μmol N/day1.8\times 10^{-2}\ \mu\text{mol N/day}; Specimen 2: 1.5 μmol N/day1.5\ \mu\text{mol N/day}; Specimen 3: 2.0×102 μmol N/day2.0\times 10^2\ \mu\text{mol N/day} (200 μmol N/day\mu\text{mol N/day}).

Steps

To find the daily excretion of atomic nitrogen (μmol N/day\mu\text{mol N/day}) for each specimen, calculate the molar amount of the excreted nitrogenous molecule per day and multiply it by the number of nitrogen atoms per molecule:

Nitrogen output=ncompound×(atoms of N per molecule)\text{Nitrogen output} = n_{\text{compound}} \times (\text{atoms of N per molecule})

1. Specimen 1: Planarian (Ammonia, NHX3\ce{NH3})

  • Nitrogen stoichiometry: Each ammonia molecule (NHX3\ce{NH3}) contains 11 atom of nitrogen.
  • Convert volume to liters: V1=150 μL=150×10−6 L=1.50×10−4 LV_1 = 150\ \mu\text{L} = 150 \times 10^{-6}\text{ L} = 1.50 \times 10^{-4}\text{ L}
  • Calculate moles of ammonia: nNHX3=C⋅V=(1.2×10−4 mol/L)⋅(1.50×10−4 L)=1.8×10−8 moln_{\ce{NH3}} = C \cdot V = (1.2 \times 10^{-4}\text{ mol/L}) \cdot (1.50 \times 10^{-4}\text{ L}) = 1.8 \times 10^{-8}\text{ mol}
  • Convert to micromoles of atomic nitrogen: nN=1.8×10−8 mol×1 mol Nmol NH3×106 μmolmol=1.8×10−2 μmol N/dayn_{\ce{N}} = 1.8 \times 10^{-8}\text{ mol} \times 1\ \frac{\text{mol N}}{\text{mol NH}_3} \times 10^6\ \frac{\mu\text{mol}}{\text{mol}} = 1.8 \times 10^{-2}\ \mu\text{mol N/day}

2. Specimen 2: Earthworm (Urea, CO(NHX2)X2\ce{CO(NH2)2})

  • Nitrogen stoichiometry: Urea contains 22 atoms of nitrogen per molecule.
  • Convert volume and concentration: V2=2.5 mL=2.5×10−3 LV_2 = 2.5\text{ mL} = 2.5 \times 10^{-3}\text{ L} Mass excreted=(18 mg/L)⋅(2.5×10−3 L)=0.045 mg=4.5×10−5 g\text{Mass excreted} = (18\text{ mg/L}) \cdot (2.5 \times 10^{-3}\text{ L}) = 0.045\text{ mg} = 4.5 \times 10^{-5}\text{ g}
  • Calculate moles of urea: nurea=4.5×10−5 g60.06 g/mol≈7.493×10−7 moln_{\text{urea}} = \frac{4.5 \times 10^{-5}\text{ g}}{60.06\text{ g/mol}} \approx 7.493 \times 10^{-7}\text{ mol}
  • Convert to micromoles of atomic nitrogen: nN=7.493×10−7 mol urea×2 mol Nmol urea×106 μmolmol≈1.5 μmol N/dayn_{\ce{N}} = 7.493 \times 10^{-7}\text{ mol urea} \times 2\ \frac{\text{mol N}}{\text{mol urea}} \times 10^6\ \frac{\mu\text{mol}}{\text{mol}} \approx 1.5\ \mu\text{mol N/day}

3. Specimen 3: Grasshopper (Uric Acid, CX5HX4NX4OX3\ce{C5H4N4O3})

  • Nitrogen stoichiometry: Uric acid contains 44 atoms of nitrogen per molecule.
  • Calculate mass of pure uric acid: muric acid=12 mg×0.70=8.4 mg=8.4×10−3 gm_{\text{uric acid}} = 12\text{ mg} \times 0.70 = 8.4\text{ mg} = 8.4 \times 10^{-3}\text{ g}
  • Calculate moles of uric acid: nuric acid=8.4×10−3 g168.11 g/mol≈4.997×10−5 moln_{\text{uric acid}} = \frac{8.4 \times 10^{-3}\text{ g}}{168.11\text{ g/mol}} \approx 4.997 \times 10^{-5}\text{ mol}
  • Convert to micromoles of atomic nitrogen: nN=4.997×10−5 mol uric acid×4 mol Nmol uric acid×106 μmolmol≈2.0×102 μmol N/day(200 μmol N/day)n_{\ce{N}} = 4.997 \times 10^{-5}\text{ mol uric acid} \times 4\ \frac{\text{mol N}}{\text{mol uric acid}} \times 10^6\ \frac{\mu\text{mol}}{\text{mol}} \approx 2.0 \times 10^2\ \mu\text{mol N/day}\quad (200\ \mu\text{mol N/day})

Common Pitfall: Forgetting to account for the molecular formula stoichiometry (multiplying urea by 22 and uric acid by 44) will result in calculating the moles of compound rather than the moles of elemental nitrogen excreted.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets to multiply the moles of urea by 2 to account for the stoichiometric ratio of two nitrogen atoms per molecule of urea.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    V=150 μL=1.5×10−4 LV = 150\ \mu\text{L} = 1.5 \times 10^{-4}\text{ L} ⟹\Longrightarrow n(NH3)=1.5×10−4 L×1.2×10−4 mol/L=1.8×10−8 mol=0.018 μmoln(\text{NH}_3) = 1.5 \times 10^{-4}\text{ L} \times 1.2 \times 10^{-4}\text{ mol/L} = 1.8 \times 10^{-8}\text{ mol} = 0.018\ \mu\text{mol} ⟹\Longrightarrow Each NH3\text{NH}_3 has 1 N1\text{ N}, so nitrogen output =0.018 μmol N= 0.018\ \mu\text{mol N}

  2. Step 2

    m(urea)=2.5×10−3 L×18 mg/L=0.045 mg=4.5×10−5 gm(\text{urea}) = 2.5 \times 10^{-3}\text{ L} \times 18\text{ mg/L} = 0.045\text{ mg} = 4.5 \times 10^{-5}\text{ g} ⟹\Longrightarrow n(urea)=4.5×10−5 g/60.06 g/mol=7.49×10−7 mol=0.749 μmoln(\text{urea}) = 4.5 \times 10^{-5}\text{ g} / 60.06\text{ g/mol} = 7.49 \times 10^{-7}\text{ mol} = 0.749\ \mu\text{mol} ⟹\Longrightarrow Nitrogen output=0.749 μmol N\text{Nitrogen output} = 0.749\ \mu\text{mol N}

    Correct

    nN=0.7493 μmol urea×2 μmol Nμmol urea≈1.5 μmol N/dayn_{\ce{N}} = 0.7493\ \mu\text{mol urea} \times 2\ \frac{\mu\text{mol N}}{\mu\text{mol urea}} \approx 1.5\ \mu\text{mol N/day}

    You found the total micromoles of urea molecules correctly (0.749 μmol0.749\ \mu\text{mol}), but urea's chemical formula is CO(NHX2)X2\ce{CO(NH2)2}, which contains 22 atoms of nitrogen per molecule. You need to multiply the moles of urea by 22 to get the output in atomic nitrogen.

  3. Step 3

    m(uric acid)=12 mg×0.70=8.4 mg=8.4×10−3 gm(\text{uric acid}) = 12\text{ mg} \times 0.70 = 8.4\text{ mg} = 8.4 \times 10^{-3}\text{ g} ⟹\Longrightarrow n(uric acid)=8.4×10−3 g/168.11 g/mol=4.997×10−5 mol=49.97 μmoln(\text{uric acid}) = 8.4 \times 10^{-3}\text{ g} / 168.11\text{ g/mol} = 4.997 \times 10^{-5}\text{ mol} = 49.97\ \mu\text{mol} ⟹\Longrightarrow Each uric acid has 4 N4\text{ N}, so nitrogen output =4×49.97 μmol=199.9 μmol N= 4 \times 49.97\ \mu\text{mol} = 199.9\ \mu\text{mol N}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly converted all liquid volumes to liters and metric masses to grams.

You accurately calculated the molecular molar amounts for all three nitrogenous excretory compounds.

You successfully applied the 4:1 stoichiometric multiplier for nitrogen atoms in uric acid.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Molecular Formula Stoichiometry Omission

You treated the molar amount of urea directly as the molar amount of atomic nitrogen, missing the factor of 2.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Overlooking internal subscript stoichiometry in condensed structural formulas like CO(NHX2)X2\ce{CO(NH2)2}, where the parentheses and subscript 2 double the nitrogen atom count.

REASONING PATH
Your ACEpath teacher’s suggested approach
Atomic Nitrogen Multiplier
  • Moles of atomic N=Moles of compound×(number of N atoms in formula)\text{Moles of atomic N} = \text{Moles of compound} \times (\text{number of N atoms in formula})

  • Always inspect the chemical formula for nitrogen subscripts before writing the final atomic nitrogen quantity.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Multiply the micromoles of urea by the stoichiometric factor of 2 nitrogen atoms per molecule: nN=0.7493 μmol×2 μmol Nμmol urean_{\ce{N}} = 0.7493\ \mu\text{mol} \times 2\ \frac{\mu\text{mol N}}{\mu\text{mol urea}}

  2. Calculate the resulting value: nN≈1.50 μmol N/dayn_{\ce{N}} \approx 1.50\ \mu\text{mol N/day}

Final answer

Specimen 1: 1.8×10−2 μmol N/day1.8 \times 10^{-2}\ \mu\text{mol N/day}; Specimen 2: 1.5 μmol N/day1.5\ \mu\text{mol N/day}; Specimen 3: 2.0×102 μmol N/day2.0 \times 10^2\ \mu\text{mol N/day}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always write down the expanded formula of urea as CHX4NX2O\ce{CH4N2O} to make the two nitrogen atoms obvious.

  • Practice checking whether a question asks for moles of compound or moles of a specific constituent element.

OverviewACEpath Teacher's Diagnosis

02 The student ignores the 70% mass purity of the uric acid paste, calculating the amount of uric acid using the entire 12 mg dry mass.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    V=150 μL=1.5×10−4 L  ⟹  n(NHX3)=1.5×10−4 L×1.2×10−4 mol/L=0.018 μmol  ⟹  Nitrogen output=0.018 μmol NV = 150\ \mu\text{L} = 1.5 \times 10^{-4}\text{ L} \implies n(\ce{NH3}) = 1.5 \times 10^{-4}\text{ L} \times 1.2 \times 10^{-4}\text{ mol/L} = 0.018\ \mu\text{mol} \implies \text{Nitrogen output} = 0.018\ \mu\text{mol N}

  2. Step 2

    m(urea)=0.0025 L×18 mg/L=0.045 mg  ⟹  n(urea)=0.045 mg60.06 g/mol=0.749 μmol  ⟹  Nitrogen output=2×0.749 μmol=1.50 μmol Nm(\text{urea}) = 0.0025\text{ L} \times 18\text{ mg/L} = 0.045\text{ mg} \implies n(\text{urea}) = \frac{0.045\text{ mg}}{60.06\text{ g/mol}} = 0.749\ \mu\text{mol} \implies \text{Nitrogen output} = 2 \times 0.749\ \mu\text{mol} = 1.50\ \mu\text{mol N}

  3. Step 3

    m(uric acid)=12 mg=1.2×10−2 gm(\text{uric acid}) = 12\text{ mg} = 1.2 \times 10^{-2}\text{ g}

    Correct

    m(uric acid)=12 mg×0.70=8.4 mg=8.4×10−3 gm(\text{uric acid}) = 12\text{ mg} \times 0.70 = 8.4\text{ mg} = 8.4 \times 10^{-3}\text{ g}

    The 12 mg12\text{ mg} represents the total dry paste, which is only 70%70\% uric acid by mass. You need to multiply by 0.700.70 to obtain the actual mass of uric acid (8.4 mg8.4\text{ mg}).

  4. Step 4

    n(uric acid)=1.2×10−2 g168.11 g/mol=7.138×10−5 mol=71.38 μmol  ⟹  Nitrogen output=4×71.38 μmol=285.5 μmol Nn(\text{uric acid}) = \frac{1.2 \times 10^{-2}\text{ g}}{168.11\text{ g/mol}} = 7.138 \times 10^{-5}\text{ mol} = 71.38\ \mu\text{mol} \implies \text{Nitrogen output} = 4 \times 71.38\ \mu\text{mol} = 285.5\ \mu\text{mol N}

    Correct

    n(uric acid)=8.4×10−3 g168.11 g/mol≈4.997×10−5 mol  ⟹  Nitrogen output=4×49.97 μmol≈2.0×102 μmol Nn(\text{uric acid}) = \frac{8.4 \times 10^{-3}\text{ g}}{168.11\text{ g/mol}} \approx 4.997 \times 10^{-5}\text{ mol} \implies \text{Nitrogen output} = 4 \times 49.97\ \mu\text{mol} \approx 2.0 \times 10^2\ \mu\text{mol N}

    Your conversion method and your multiplication by 44 for the nitrogen atoms were algebraically sound, but the numerical result is off because of the uncorrected mass from the previous step.

WHAT YOU DID WELL
Compliments from Your Teacher

You accurately converted units between milliliters, microliters, milligrams, and grams.

You correctly applied molecular stoichiometry by multiplying by 2 for urea and 4 for uric acid.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omission of mass purity percentage

You treated the total excreted dry paste mass as pure uric acid instead of multiplying by its 70% purity fraction.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Overlooking sample purity specifications in word problems when transitioning from crude biological waste to pure chemical solute.

REASONING PATH
Your ACEpath teacher’s suggested approach
Check Waste Sample Purity
  • msolute=mcrude sample×(% purity/100)m_{\text{solute}} = m_{\text{crude sample}} \times (\%\text{ purity} / 100)

  • Always verify whether an excreted sample is described as a mixture or percentage before using its total mass in molar calculations.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Multiply the total paste mass by the purity fraction: m(uric acid)=12 mg×0.70=8.4 mg=8.4×10−3 gm(\text{uric acid}) = 12\text{ mg} \times 0.70 = 8.4\text{ mg} = 8.4 \times 10^{-3}\text{ g}.

  2. Calculate moles of pure uric acid: n=8.4×10−3 g168.11 g/mol≈4.997×10−5 mol=49.97 μmoln = \frac{8.4 \times 10^{-3}\text{ g}}{168.11\text{ g/mol}} \approx 4.997 \times 10^{-5}\text{ mol} = 49.97\ \mu\text{mol}.

  3. Multiply by 4 nitrogen atoms per molecule: Nitrogen output=4×49.97 μmol≈200 μmol N\text{Nitrogen output} = 4 \times 49.97\ \mu\text{mol} \approx 200\ \mu\text{mol N}.

Final answer

Specimen 1: 1.8×10−2 μmol N/day1.8 \times 10^{-2}\ \mu\text{mol N/day}; Specimen 2: 1.5 μmol N/day1.5\ \mu\text{mol N/day}; Specimen 3: 2.0×102 μmol N/day2.0 \times 10^2\ \mu\text{mol N/day}

NEXT STEPS
Final Takeaways from Your Teacher
  • Re-read problem prompts specifically looking for purity or mass percentage descriptors such as 'dry paste containing X%X\% pure compound'.

  • Practice two-step unit setups where you first extract pure analyte mass before applying molar mass conversions.

OverviewACEpath Teacher's Diagnosis

03 The student divides by the wet body mass to compute a mass-specific rate instead of reporting the requested absolute daily excretion rate.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    n(NH3)=1.5×10−4 L×1.2×10−4 M=0.018 μmoln(\text{NH}_3) = 1.5 \times 10^{-4}\text{ L} \times 1.2 \times 10^{-4}\text{ M} = 0.018\ \mu\text{mol}

  2. Step 2

    Nitrogen output=0.018 μmol/0.20 g=0.09 μmol N\text{Nitrogen output} = 0.018\ \mu\text{mol} / 0.20\text{ g} = 0.09\ \mu\text{mol N}

    Correct

    nN=0.018 μmol×1 μmol Nμmol NH3=1.8×10−2 μmol N/dayn_{\ce{N}} = 0.018\ \mu\text{mol} \times 1\ \frac{\mu\text{mol N}}{\mu\text{mol NH}_3} = 1.8 \times 10^{-2}\ \mu\text{mol N/day}

    The question asked for the absolute daily nitrogen output, not the mass-specific rate. Dividing by the wet mass of 0.20 g0.20\text{ g} yields μmol N/g\mu\text{mol N/g}, rather than the total μmol N/day\mu\text{mol N/day}.

  3. Step 3

    n(urea)=0.0025 L×0.018 g/L60.06 g/mol=0.749 μmoln(\text{urea}) = \frac{0.0025\text{ L} \times 0.018\text{ g/L}}{60.06\text{ g/mol}} = 0.749\ \mu\text{mol}

  4. Step 4

    Nitrogen output=2×0.749 μmol4.0 g=0.375 μmol N\text{Nitrogen output} = \frac{2 \times 0.749\ \mu\text{mol}}{4.0\text{ g}} = 0.375\ \mu\text{mol N}

    Correct

    nN=0.7493 μmol×2 μmol Nμmol urea≈1.5 μmol N/dayn_{\ce{N}} = 0.7493\ \mu\text{mol} \times 2\ \frac{\mu\text{mol N}}{\mu\text{mol urea}} \approx 1.5\ \mu\text{mol N/day}

    You correctly identified that urea carries 22 nitrogen atoms per molecule, but you divided by the earthworm's body mass (4.0 g4.0\text{ g}) instead of reporting the total daily output.

  5. Step 5

    n(uric acid)=12 mg×0.70168.11 g/mol=49.97 μmoln(\text{uric acid}) = \frac{12\text{ mg} \times 0.70}{168.11\text{ g/mol}} = 49.97\ \mu\text{mol}

  6. Step 6

    Nitrogen output=4×49.97 μmol1.5 g=133.3 μmol N\text{Nitrogen output} = \frac{4 \times 49.97\ \mu\text{mol}}{1.5\text{ g}} = 133.3\ \mu\text{mol N}

    Correct

    nN=4.997×10−5 mol×4 μmol Nμmol uric acid×106 μmol\mol≈2.0×102 μmol N/dayn_{\ce{N}} = 4.997 \times 10^{-5}\text{ mol} \times 4\ \frac{\mu\text{mol N}}{\mu\text{mol uric acid}} \times 10^6\ \frac{\mu\text{mol}}{\mol} \approx 2.0 \times 10^2\ \mu\text{mol N/day}

    You correctly multiplied by 44 for the 44 nitrogen atoms in uric acid, but dividing by 1.5 g1.5\text{ g} computes a mass-normalized rate rather than the requested absolute daily output.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the daily molar quantities of ammonia, urea, and uric acid excreted by each specimen.

You correctly applied the stoichiometric ratio of nitrogen atoms per molecule (11 for NHX3\ce{NH3}, 22 for urea, and 44 for uric acid).

You handled concentration, molar mass, and unit prefixes accurately across all three specimens.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Mass-specific vs. absolute rate confusion

Dividing the total calculated nitrogen by each organism's mass even though the problem asked for the absolute daily excretion.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You conflated absolute excretion rate (μmol N/day\mu\text{mol N/day}) with mass-specific excretion rate (μmol N⋅g−1⋅day−1\mu\text{mol N}\cdot\text{g}^{-1}\cdot\text{day}^{-1}). Body masses were provided as distractor contextual data, but because no mass-standardized rate was requested, dividing by mass was unnecessary.

REASONING PATH
Your ACEpath teacher’s suggested approach
Target Units Verification
  • Always match your calculation directly to the specified units: μmol N/day\mu\text{mol N/day} requires absolute molar quantity, whereas μmol N⋅g−1⋅day−1\mu\text{mol N}\cdot\text{g}^{-1}\cdot\text{day}^{-1} requires dividing by mass.

  • Check whether the prompt requests 'absolute output' or 'mass-specific / per-gram output' before using body mass values.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Specimen 1: Multiply moles of NHX3\ce{NH3} by 1 N/molecule1\text{ N/molecule}: nN=0.018 μmol×1=1.8×10−2 μmol N/dayn_{\ce{N}} = 0.018\ \mu\text{mol} \times 1 = 1.8 \times 10^{-2}\ \mu\text{mol N/day}.

  2. Specimen 2: Multiply moles of urea by 2 N/molecule2\text{ N/molecule}: nN=0.7493 μmol×2≈1.5 μmol N/dayn_{\ce{N}} = 0.7493\ \mu\text{mol} \times 2 \approx 1.5\ \mu\text{mol N/day}.

  3. Specimen 3: Multiply moles of uric acid by 4 N/molecule4\text{ N/molecule}: nN=49.97 μmol×4≈2.0×102 μmol N/dayn_{\ce{N}} = 49.97\ \mu\text{mol} \times 4 \approx 2.0 \times 10^2\ \mu\text{mol N/day} (200 μmol N/day200\ \mu\text{mol N/day}).

Final answer

Specimen 1: 1.8×10−2 μmol N/day1.8 \times 10^{-2}\ \mu\text{mol N/day}; Specimen 2: 1.5 μmol N/day1.5\ \mu\text{mol N/day}; Specimen 3: 2.0×102 μmol N/day2.0 \times 10^2\ \mu\text{mol N/day} (200 μmol N/day200\ \mu\text{mol N/day})

NEXT STEPS
Final Takeaways from Your Teacher
  • Pay close attention to whether physiological rate questions ask for absolute total rate versus mass-specific rate.

  • Keep body mass in reserve unless the target unit contains per-gram (g−1\text{g}^{-1}) units.

Lock it in

Similar question

01

A freshwater teleost fish excretes 500 mL500\text{ mL} of water daily containing ammonium ions (NHX4X+\ce{NH4+}, molar mass 18.04 g/mol18.04\text{ g/mol}) at a concentration of 0.36 mg/L0.36\text{ mg/L}. Calculate the daily excretion of atomic nitrogen in μmol N/day\mu\text{mol N/day}.

Answer

10 μmol N/day10\ \mu\text{mol N/day}. Key steps: Total mass of NHX4X+=0.500 L×0.36 mg/L=0.18 mg=1.8×10−4 g\ce{NH4+} = 0.500\text{ L} \times 0.36\text{ mg/L} = 0.18\text{ mg} = 1.8 \times 10^{-4}\text{ g}. Moles of NHX4X+=(1.8×10−4 g)/(18.04 g/mol)≈1.0×10−5 mol=10 μmol\ce{NH4+} = (1.8 \times 10^{-4}\text{ g}) / (18.04\text{ g/mol}) \approx 1.0 \times 10^{-5}\text{ mol} = 10\ \mu\text{mol}. Since each NHX4X+\ce{NH4+} contains 1 N1\text{ N}, output is 10 μmol N/day10\ \mu\text{mol N/day}.

02

An adult frog excretes a daily urine volume of 12 mL12\text{ mL} containing 1.5 g/L1.5\text{ g/L} of urea (CO(NHX2)X2\ce{CO(NH2)2}, M=60.06 g/molM = 60.06\text{ g/mol}). Calculate the daily atomic nitrogen excretion in millimoles of nitrogen (mmol N/day\text{mmol N/day}).

Answer

0.60 mmol N/day0.60\text{ mmol N/day}. Key steps: Mass of urea =0.012 L×1.5 g/L=0.018 g= 0.012\text{ L} \times 1.5\text{ g/L} = 0.018\text{ g}. Moles of urea =0.018 g/60.06 g/mol≈3.0×10−4 mol=0.30 mmol= 0.018\text{ g} / 60.06\text{ g/mol} \approx 3.0 \times 10^{-4}\text{ mol} = 0.30\text{ mmol}. Atomic nitrogen output =0.30 mmol urea×2=0.60 mmol N/day= 0.30\text{ mmol urea} \times 2 = 0.60\text{ mmol N/day}.

03

A desert reptile excretes 0.45 g0.45\text{ g} of cloacal pellets daily containing 80%80\% uric acid by mass (CX5HX4NX4OX3\ce{C5H4N4O3}, M=168.11 g/molM = 168.11\text{ g/mol}) and 5%5\% guanine by mass (CX5HX5NX5O\ce{C5H5N5O}, M=151.13 g/molM = 151.13\text{ g/mol}). Determine the total combined daily atomic nitrogen output in mmol N/day\text{mmol N/day}.

Answer

9.3 mmol N/day9.3\text{ mmol N/day}. Key steps: Mass of uric acid =0.45 g×0.80=0.36 g= 0.45\text{ g} \times 0.80 = 0.36\text{ g}; moles =0.36/168.11≈2.141×10−3 mol= 0.36 / 168.11 \approx 2.141 \times 10^{-3}\text{ mol}; nitrogen from uric acid =2.141×4=8.56 mmol N= 2.141 \times 4 = 8.56\text{ mmol N}. Mass of guanine =0.45 g×0.05=0.0225 g= 0.45\text{ g} \times 0.05 = 0.0225\text{ g}; moles =0.0225/151.13≈1.489×10−4 mol= 0.0225 / 151.13 \approx 1.489 \times 10^{-4}\text{ mol}; nitrogen from guanine =0.1489×5=0.74 mmol N= 0.1489 \times 5 = 0.74\text{ mmol N}. Total nitrogen =8.56+0.74=9.30 mmol N/day= 8.56 + 0.74 = 9.30\text{ mmol N/day}.

Loading workspace…