Resources

An individual experiences profound heat exhaustion where their mean skin temperature approaches the core body temperature (Tskin=Tcore=38.5∘CT_{\text{skin}} = T_{\text{core}} = 38.5^\circ\text{C}) while operating in ambient air at Tambient=45.0∘CT_{\text{ambient}} = 45.0^\circ\text{C}. Because Tambient>TskinT_{\text{ambient}} > T_{\text{skin}}, convective and radiative heat transfers are strictly inward heat gains rather than heat losses. Under extreme ambient conditions where relative humidity approaches 100%100\% (PH2O, air→PH2O, skin=51.0 mmHgP_{\text{H}_2\text{O, air}} \to P_{\text{H}_2\text{O, skin}} = 51.0\text{ mmHg}), the water vapor pressure gradient across the skin boundary approaches zero, reducing evaporative cooling capacity to zero. If the individual produces a basal resting metabolic rate of 95.0 W95.0\text{ W} and absorbs an additional convective/radiative heat load of 55.0 W55.0\text{ W}, calculate the asymptotic rate of core body temperature rise in degrees Celsius per hour (∘C/h^\circ\text{C/h}) assuming zero heat dissipation, a total body mass of 70.0 kg70.0\text{ kg}, and an average specific heat capacity of human soft tissue of c=3470 J/(kg⋅∘C)c = 3470\text{ J/(kg}\cdot^\circ\text{C)}.

Answer and steps

Final answer

2.22∘C/h2.22^\circ\text{C/h}

Steps

01

Identify the Net Heat Gain Rate (Q˙net\dot{Q}_{\text{net}})

Thermoregulation depends on the balance between heat produced, heat gained from the environment, and heat dissipated:

Q˙net=Q˙metabolism+Q˙environment−Q˙dissipated\dot{Q}_{\text{net}} = \dot{Q}_{\text{metabolism}} + \dot{Q}_{\text{environment}} - \dot{Q}_{\text{dissipated}}

From the given conditions:

  • Metabolic heat production (Q˙metabolism\dot{Q}_{\text{metabolism}}): 95.0 W95.0\text{ W}
  • Environmental heat gain (Q˙environment\dot{Q}_{\text{environment}}): Because ambient temperature (45.0∘C45.0^\circ\text{C}) exceeds skin temperature (38.5∘C38.5^\circ\text{C}), convection and radiation add heat to the body at a rate of 55.0 W55.0\text{ W}.
  • Heat dissipation (Q˙dissipated\dot{Q}_{\text{dissipated}}): At 100%100\% relative humidity, the skin-to-air water vapor pressure gradient is zero, so evaporative cooling is completely suppressed (0 W0\text{ W}).

Thus, the total net heat energy entering the body per second is:

Q˙net=95.0 W+55.0 W=150.0 W=150.0 J/s\dot{Q}_{\text{net}} = 95.0\text{ W} + 55.0\text{ W} = 150.0\text{ W} = 150.0\text{ J/s}


02

Relate Heat Absorption to Core Temperature Rise

The thermal energy required to change the temperature of a mass mm with specific heat capacity cc by an amount ΔT\Delta T is given by:

Q=m⋅c⋅ΔTQ = m \cdot c \cdot \Delta T

Differentiating with respect to time gives the rate of temperature increase:

dTdt=Q˙netm⋅c\frac{dT}{dt} = \frac{\dot{Q}_{\text{net}}}{m \cdot c}

Substitute the provided physiological parameters:

  • Body mass: m=70.0 kgm = 70.0\text{ kg}
  • Specific heat capacity of tissue: c=3470 J/(kg⋅∘C)c = 3470\text{ J/(kg}\cdot^\circ\text{C)}

dTdt=150.0 J/s70.0 kg⋅3470 J/(kg⋅∘C)=150.0242900 ∘C/s≈6.1754×10−4 ∘C/s\frac{dT}{dt} = \frac{150.0\text{ J/s}}{70.0\text{ kg} \cdot 3470\text{ J/(kg}\cdot^\circ\text{C)}} = \frac{150.0}{242900}\ ^\circ\text{C/s} \approx 6.1754 \times 10^{-4}\ ^\circ\text{C/s}


03

Convert Rate to Degrees Celsius per Hour (∘C/h^\circ\text{C/h})

Since there are 3600 seconds3600\text{ seconds} in 1 hour1\text{ hour}:

dTdt=(6.1754×10−4 ∘C/s)⋅3600 s/h=540000242900 ∘C/s≈2.22∘C/h\frac{dT}{dt} = \left(6.1754 \times 10^{-4}\ ^\circ\text{C/s}\right) \cdot 3600\text{ s/h} = \frac{540000}{242900}\ ^\circ\text{C/s} \approx 2.22^\circ\text{C/h}

(Common Pitfall: Forgetting that a watt is a joule per second (J/s\text{J/s}). Directly dividing by heat capacity without converting seconds to hours would give the rate per second instead of per hour.)

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets to convert time from seconds to hours, yielding the rate of temperature rise per second instead of per hour.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Total heat gain rate=95.0 W+55.0 W=150.0 W=150.0 J/s\text{Total heat gain rate} = 95.0\text{ W} + 55.0\text{ W} = 150.0\text{ W} = 150.0\text{ J/s}

  2. Step 2

    Heat capacity C=70.0 kg×3470 J/(kg⋅∘C)=242900 J/∘C\text{Heat capacity } C = 70.0\text{ kg} \times 3470\text{ J/(kg}\cdot^\circ\text{C)} = 242900\text{ J/}^\circ\text{C}

  3. Step 3

    Rate of temperature rise=150.0/242900≈0.000618 ∘C/h\text{Rate of temperature rise} = 150.0 / 242900 \approx 0.000618\ ^\circ\text{C/h}

    Correct

    dTdt=150.0 J/s242900 J/∘C×3600 s/h≈2.22∘C/h\frac{dT}{dt} = \frac{150.0\text{ J/s}}{242900\text{ J/}^\circ\text{C}} \times 3600\text{ s/h} \approx 2.22^\circ\text{C/h}

    Because power in watts is defined in joules per second (J/s\text{J/s}), dividing Q˙net\dot{Q}_{\text{net}} by CC gives the rate of temperature increase in ∘C/s^\circ\text{C/s} (approximately 6.18×10−4 ∘C/s6.18 \times 10^{-4}\ ^\circ\text{C/s}). To express the final answer in ∘C/h^\circ\text{C/h}, you must multiply by 3600 s/h3600\text{ s/h}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the net rate of heat gain by combining metabolic and environmental heat inputs.

You correctly determined the total heat capacity of the human body using mass and specific heat capacity.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Missing Time Unit Conversion (Seconds to Hours)

You computed the rate of temperature rise per second, but labeled and submitted it as the rate per hour without multiplying by 36003600.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

A watt is defined as one joule per second (1 W=1 J/s1\text{ W} = 1\text{ J/s}). When heat rates are evaluated in watts, the resulting time derivative of temperature naturally emerges in ∘C/s^\circ\text{C/s}. Converting from seconds to hours requires multiplying by 3600 s/h3600\text{ s/h}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Track Base Units of Power
  • 1 W=1 J/s1\text{ W} = 1\text{ J/s}

  • Whenever an equation involves watts, explicitly write J/s\text{J/s} to ensure any final time unit (such as hours or minutes) is converted properly.

Dimensional Analysis for Rate Conversion
  • Rate in ∘C/h=(Rate in ∘C/s)×3600 s/h\text{Rate in } ^\circ\text{C/h} = \left(\text{Rate in } ^\circ\text{C/s}\right) \times 3600\text{ s/h}

  • Multiply the rate per second by 36003600 to obtain the rate per hour.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Calculate the rate of temperature rise per second: dTdt=150.0 J/s242900 J/∘C≈6.1754×10−4 ∘C/s\frac{dT}{dt} = \frac{150.0\text{ J/s}}{242900\text{ J/}^\circ\text{C}} \approx 6.1754 \times 10^{-4}\ ^\circ\text{C/s}

  2. Multiply by 3600 s/h3600\text{ s/h} to convert to degrees Celsius per hour: dTdt=6.1754×10−4×3600=540000242900≈2.22∘C/h\frac{dT}{dt} = 6.1754 \times 10^{-4} \times 3600 = \frac{540000}{242900} \approx 2.22^\circ\text{C/h}

Final answer

2.22∘C/h2.22^\circ\text{C/h}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always write down the full dimensional units at each step, especially replacing W\text{W} with J/s\text{J/s}.

  • Double-check that the time unit requested in the question (hours) matches the time unit in your final calculated value before boxing the answer.

OverviewACEpath Teacher's Diagnosis

02 The student treats the convective/radiative heat load as heat lost rather than gained, subtracting 55.0 W from 95.0 W.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Net heat gain rate=95.0 W−55.0 W=40.0 W=40.0 J/s\text{Net heat gain rate} = 95.0\text{ W} - 55.0\text{ W} = 40.0\text{ W} = 40.0\text{ J/s}

    Correct

    Q˙net=95.0 W+55.0 W=150.0 W=150.0 J/s\dot{Q}_{\text{net}} = 95.0\text{ W} + 55.0\text{ W} = 150.0\text{ W} = 150.0\text{ J/s}

    Because the ambient temperature (45.0∘C45.0^\circ\text{C}) exceeds skin temperature (38.5∘C38.5^\circ\text{C}), convection and radiation transfer heat into the body rather than out. This environmental load must be added to internal metabolic heat generation, not subtracted.

  2. Step 2

    Heat gained in 1 hour=40.0 J/s×3600 s=144000 J\text{Heat gained in 1 hour} = 40.0\text{ J/s} \times 3600\text{ s} = 144000\text{ J}

    Correct

    Heat gained in 1 hour=150.0 J/s×3600 s=540000 J\text{Heat gained in 1 hour} = 150.0\text{ J/s} \times 3600\text{ s} = 540000\text{ J}

    You converted from seconds to hours correctly using 3600 s/h3600\text{ s/h}, but the numerical value carries over the incorrect net heat gain rate from step 1.

  3. Step 3

    Heat capacity C=70.0 kg×3470 J/(kg⋅∘C)=242900 J/∘C\text{Heat capacity } C = 70.0\text{ kg} \times 3470\text{ J/(kg}\cdot^\circ\text{C)} = 242900\text{ J/}^\circ\text{C}

  4. Step 4

    Rate of temperature rise=144000242900≈0.593∘C/h\text{Rate of temperature rise} = \frac{144000}{242900} \approx 0.593^\circ\text{C/h}

    Correct

    dTdt=540000 J/h242900 J/∘C≈2.22∘C/h\frac{dT}{dt} = \frac{540000\text{ J/h}}{242900\text{ J/}^\circ\text{C}} \approx 2.22^\circ\text{C/h}

    Your division of hourly heat energy by heat capacity is methodologically sound, but the final rate reflects the error originating in step 1.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the formula for total heat capacity (C=m⋅cC = m \cdot c).

You correctly recognized that 1 W=1 J/s1\text{ W} = 1\text{ J/s} and converted seconds to hours by multiplying by 36003600.

You related energy input and heat capacity to find the rate of temperature rise.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Sign error in thermodynamic heat balance

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the environmental heat load as a mechanism of heat dissipation rather than heat gain, overlooking the direction of thermal transfer when ambient temperature exceeds body surface temperature.

REASONING PATH
Your ACEpath teacher’s suggested approach
Direction of dry heat exchange
  • When Tambient>TskinT_{\text{ambient}} > T_{\text{skin}}, convective and radiative fluxes transfer heat into the body (heat gain). When Tambient<TskinT_{\text{ambient}} < T_{\text{skin}}, they transfer heat out of the body (heat loss).

  • Check the temperature gradient between skin and air before deciding whether convective and radiative loads should be added or subtracted in the heat balance equation.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Sum internal metabolic rate and inward environmental heat gain: Q˙net=95.0 W+55.0 W=150.0 W=150.0 J/s\dot{Q}_{\text{net}} = 95.0\text{ W} + 55.0\text{ W} = 150.0\text{ W} = 150.0\text{ J/s}.

  2. Convert to total thermal energy gained per hour: Q1h=150.0 J/s×3600 s=540000 JQ_{\text{1h}} = 150.0\text{ J/s} \times 3600\text{ s} = 540000\text{ J}.

  3. Divide by the body heat capacity: dTdt=540000 J242900 J/∘C≈2.22∘C/h\frac{dT}{dt} = \frac{540000\text{ J}}{242900\text{ J/}^\circ\text{C}} \approx 2.22^\circ\text{C/h}.

Final answer

2.22∘C/h2.22^\circ\text{C/h}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the signs in the general bioenergetic heat balance equation: Q˙stored=Q˙metabolic±Q˙radiation±Q˙convection±Q˙conduction−Q˙evaporation\dot{Q}_{\text{stored}} = \dot{Q}_{\text{metabolic}} \pm \dot{Q}_{\text{radiation}} \pm \dot{Q}_{\text{convection}} \pm \dot{Q}_{\text{conduction}} - \dot{Q}_{\text{evaporation}}.

  • Verify each heat exchange avenue independently as an influx (++) or efflux (−-) relative to the body boundary before summing.

OverviewACEpath Teacher's Diagnosis

03 The student omits the external heat load entirely, calculating the temperature rise from metabolic rate alone.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Net heat gain rate=95.0 W=95.0 J/s\text{Net heat gain rate} = 95.0\text{ W} = 95.0\text{ J/s}

    Correct

    Q˙net=Q˙metabolism+Q˙environment=95.0 W+55.0 W=150.0 W\dot{Q}_{\text{net}} = \dot{Q}_{\text{metabolism}} + \dot{Q}_{\text{environment}} = 95.0\text{ W} + 55.0\text{ W} = 150.0\text{ W}

    When ambient temperature exceeds skin temperature, the body gains heat from the surroundings. You need to add the external heat load (55.0 W55.0\text{ W}) to the metabolic heat production (95.0 W95.0\text{ W}) to get the total net rate of heat influx.

  2. Step 2

    Heat gained in 1 hour=95.0 J/s×3600 s=342000 J\text{Heat gained in 1 hour} = 95.0\text{ J/s} \times 3600\text{ s} = 342000\text{ J}

    Correct

    Qhour=150.0 J/s×3600 s=540000 JQ_{\text{hour}} = 150.0\text{ J/s} \times 3600\text{ s} = 540000\text{ J}

    Your conversion from seconds to an hour using 3600 s3600\text{ s} is mathematically correct, but it carries forward the incomplete heat gain rate from Step 1.

  3. Step 3

    Heat capacity C=70.0 kg×3470 J/(kg⋅∘C)=242900 J/∘C\text{Heat capacity } C = 70.0\text{ kg} \times 3470\text{ J/(kg}\cdot^\circ\text{C)} = 242900\text{ J/}^\circ\text{C}

  4. Step 4

    Rate of temperature rise=342000/242900≈1.41 ∘C/h\text{Rate of temperature rise} = 342000 / 242900 \approx 1.41\ ^\circ\text{C/h}

    Correct

    dTdt=540000 J242900 J/∘C≈2.22∘C/h\frac{dT}{dt} = \frac{540000\text{ J}}{242900\text{ J/}^\circ\text{C}} \approx 2.22^\circ\text{C/h}

    Your division of thermal energy by heat capacity was carried out properly, but the numerical result is lower than expected due to the missing heat load in Step 1.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recognized that 1 W=1 J/s1\text{ W} = 1\text{ J/s} and converted between seconds and hours using 3600 s3600\text{ s}.

You accurately computed the total body heat capacity using C=m⋅cC = m \cdot c.

You correctly related heat energy and heat capacity to find the rate of temperature rise.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omission of external heat load

You used only the basal metabolic rate (95.0 W95.0\text{ W}) as the net heat influx, overlooking the 55.0 W55.0\text{ W} absorbed from the hotter ambient environment.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Incomplete thermal energy balance. When Tambient>TskinT_{\text{ambient}} > T_{\text{skin}}, environmental radiative and convective fluxes represent an external heat source rather than a cooling sink, so they must be summed with metabolic heat production.

REASONING PATH
Your ACEpath teacher’s suggested approach
Establish the Complete Heat Balance
  • Q˙net=Q˙metabolic+Q˙environment, in−Q˙dissipated\dot{Q}_{\text{net}} = \dot{Q}_{\text{metabolic}} + \dot{Q}_{\text{environment, in}} - \dot{Q}_{\text{dissipated}}

  • Always check whether ambient temperature is above or below skin temperature to determine whether environmental exchange adds to or subtracts from the body's internal heat production.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Sum both the internal metabolic heat production and the external environmental heat load: Q˙net=95.0 W+55.0 W=150.0 W=150.0 J/s\dot{Q}_{\text{net}} = 95.0\text{ W} + 55.0\text{ W} = 150.0\text{ W} = 150.0\text{ J/s}.

  2. Multiply by the number of seconds in an hour to determine the hourly heat energy absorbed: Q1 hour=150.0 J/s×3600 s=540000 JQ_{\text{1 hour}} = 150.0\text{ J/s} \times 3600\text{ s} = 540000\text{ J}.

  3. Divide by the whole-body heat capacity (242900 J/∘C242900\text{ J/}^\circ\text{C}): dTdt=540000 J242900 J/∘C≈2.22∘C/h\frac{dT}{dt} = \frac{540000\text{ J}}{242900\text{ J/}^\circ\text{C}} \approx 2.22^\circ\text{C/h}.

Final answer

2.22∘C/h2.22^\circ\text{C/h}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review thermal balance equations in physiology, noting how environmental conditions dictate the sign of convective and radiative heat transfer.

  • Practice checking all heat inputs and outputs mentioned in the problem prompt before calculating net rates.

Lock it in

Similar question

01

A 60.0 kg60.0\text{ kg} athlete with a tissue specific heat capacity of 3500 J/(kg⋅∘C)3500\text{ J/(kg}\cdot^\circ\text{C)} accumulates uncompensated metabolic heat at a net rate of 210.0 W210.0\text{ W}. Calculate the rate of core body temperature increase in ∘C/h^\circ\text{C/h}.

Answer

Total heat capacity C=60.0 kg×3500 J/(kg⋅∘C)=210000 J/∘CC = 60.0\text{ kg} \times 3500\text{ J/(kg}\cdot^\circ\text{C)} = 210000\text{ J/}^\circ\text{C}. Rate per second: dTdt=210.0 J/s210000 J/∘C=0.0010 ∘C/s\frac{dT}{dt} = \frac{210.0\text{ J/s}}{210000\text{ J/}^\circ\text{C}} = 0.0010\ ^\circ\text{C/s}. Multiplying by 3600 s/h3600\text{ s/h} gives 3.60∘C/h3.60^\circ\text{C/h}.

02

An unacclimatized worker (m=80.0 kgm = 80.0\text{ kg}, c=3470 J/(kg⋅∘C)c = 3470\text{ J/(kg}\cdot^\circ\text{C)}) produces 180 W180\text{ W} of metabolic heat and absorbs 60 W60\text{ W} from a hot environment. If their sweating mechanism dissipates 100 W100\text{ W} of heat, find the net rate of temperature rise in ∘C/h^\circ\text{C/h}.

Answer

Net heat gain rate Q˙net=180 W+60 W−100 W=140 W=140 J/s\dot{Q}_{\text{net}} = 180\text{ W} + 60\text{ W} - 100\text{ W} = 140\text{ W} = 140\text{ J/s}. Total heat capacity C=80.0×3470=277600 J/∘CC = 80.0 \times 3470 = 277600\text{ J/}^\circ\text{C}. Rate of rise: dTdt=(140 J/s277600 J/∘C)×3600 s/h≈1.82∘C/h\frac{dT}{dt} = \left(\frac{140\text{ J/s}}{277600\text{ J/}^\circ\text{C}}\right) \times 3600\text{ s/h} \approx 1.82^\circ\text{C/h}.

03

During intense exertion in a saturated thermal chamber, a 75.0 kg75.0\text{ kg} subject (c=3470 J/(kg⋅∘C)c = 3470\text{ J/(kg}\cdot^\circ\text{C)}) absorbs net thermal energy causing their core temperature to climb from 37.0∘C37.0^\circ\text{C} to a critical threshold of 40.0∘C40.0^\circ\text{C} in exactly 45.0 minutes45.0\text{ minutes}. Calculate the constant net rate of heat gain Q˙net\dot{Q}_{\text{net}} in watts.

Answer

Total heat capacity C=75.0 kg×3470 J/(kg⋅∘C)=260250 J/∘CC = 75.0\text{ kg} \times 3470\text{ J/(kg}\cdot^\circ\text{C)} = 260250\text{ J/}^\circ\text{C}. Total heat required: Q=C⋅ΔT=260250×(40.0−37.0)=780750 JQ = C \cdot \Delta T = 260250 \times (40.0 - 37.0) = 780750\text{ J}. Total elapsed time in seconds: t=45.0 min×60 s/min=2700 st = 45.0\text{ min} \times 60\text{ s/min} = 2700\text{ s}. Net power: Q˙net=780750 J2700 s=289.17 W\dot{Q}_{\text{net}} = \frac{780750\text{ J}}{2700\text{ s}} = 289.17\text{ W} (or ≈289 W\approx 289\text{ W}).

Loading workspace…