Resources

In wheat kernel color, two polygenic loci (AA and BB) control kernel pigmentation additively, with each dominant allele (AA or BB) adding 0.15 mg0.15\text{ mg} of pigment per gram of dry tissue above a baseline white kernel phenotype (aabbaabb) containing 0.05 mg/g0.05\text{ mg/g}. A research lab standardizes grain samples in non-standard units of parts per million (ppm\text{ppm}, where 1 ppm=1 μg/g1\text{ ppm} = 1\,\mu\mathrm{g/g}). Convert the baseline and per-allele increments to ppm\text{ppm}, and determine the kernel pigment concentration in ppm\text{ppm} for the median class in an F2F_2 generation derived from crossing true-breeding red (AABBAABB) and true-breeding white (aabbaabb) parent strains.

Answer and steps

Final answer

Baseline (aabbaabb) = 50 ppm50\text{ ppm}; increment per dominant allele = 150 ppm150\text{ ppm}; median F2F_2 phenotypic class (22 dominant alleles) = 350 ppm350\text{ ppm}.

Steps

01

Convert units to parts per million (ppm\text{ppm})

The conversion factor between milligrams per gram (mg/g\text{mg/g}) and parts per million (ppm\text{ppm}, where 1 ppm=1 \mug/g1\text{ ppm} = 1\text{ \mu g/g}) is based on the metric relationship 1 mg=1000 \mug1\text{ mg} = 1000\text{ \mu g}:

1 mg/g=1000 \mug/g=1000 ppm1\text{ mg/g} = 1000\text{ \mu g/g} = 1000\text{ ppm}

Applying this conversion:

  • Baseline concentration (aabbaabb): 0.05 mg/g×1000 ppm/(mg/g)=50 ppm0.05\text{ mg/g} \times 1000\text{ ppm/(mg/g)} = 50\text{ ppm}
  • Increment per dominant allele (AA or BB): 0.15 mg/g×1000 ppm/(mg/g)=150 ppm0.15\text{ mg/g} \times 1000\text{ ppm/(mg/g)} = 150\text{ ppm}

02

Determine the F2F_2 genotypic distribution and median class

A cross between true-breeding parents: P: AABB×aabb  ⟹  F1: AaBbP:\ AABB \times aabb \implies F_1:\ AaBb

Self-fertilizing the dihybrid F1F_1 individuals (AaBb×AaBbAaBb \times AaBb) produces an F2F_2 generation with 16 equally likely gametic combinations. Under an additive polygenic model, the phenotype depends strictly on the total number of contributing (dominant) alleles:

  • 00 dominant alleles: 1/161/16 (aabbaabb)
  • 11 dominant allele: 4/164/16 (Aabb,aaBbAabb, aaBb)
  • 22 dominant alleles: 6/166/16 (AaBb,AAbb,aaBBAaBb, AAbb, aaBB)
  • 33 dominant alleles: 4/164/16 (AABb,AaBBAABb, AaBB)
  • 44 dominant alleles: 1/161/16 (AABBAABB)

The phenotypic ratio across the 16 combinations is: 1:4:6:4:11 : 4 : 6 : 4 : 1

Because the distribution is symmetric, the cumulative frequencies are:

  • ≤0\le 0 alleles: 1/161/16
  • ≤1\le 1 allele: 5/165/16
  • ≤2\le 2 alleles: 11/1611/16 (spans the 50th percentile)
  • ≤3\le 3 alleles: 15/1615/16
  • ≤4\le 4 alleles: 16/1616/16

Thus, the median F2F_2 phenotypic class has 22 dominant alleles.


03

Calculate the pigment concentration for the median class

Using the additive model: Total pigment=Baseline+(Number of dominant alleles×Increment per allele)\text{Total pigment} = \text{Baseline} + (\text{Number of dominant alleles} \times \text{Increment per allele})

Substitute the values for the median class (22 dominant alleles): Total pigment=50 ppm+(2×150 ppm)=50 ppm+300 ppm=350 ppm\text{Total pigment} = 50\text{ ppm} + (2 \times 150\text{ ppm}) = 50\text{ ppm} + 300\text{ ppm} = 350\text{ ppm}

Common Pitfall: Forgetting the baseline level (50 ppm50\text{ ppm}) and calculating only the contribution of the two dominant alleles (300 ppm300\text{ ppm}). Additive traits build upon the non-zero basal phenotypic value of the null genotype (aabbaabb).

Typical errors

OverviewACEpath Teacher's Diagnosis

01 A student incorrectly assumes 1 mg equals 100 μg instead of 1000 μg during unit conversion, resulting in 10-fold underestimated baseline and allele increment values.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Baseline=0.05 mg/g×100 \mug/mg=5 ppm  ⟹  Increment=0.15 mg/g×100 \mug/mg=15 ppm\text{Baseline} = 0.05\text{ mg/g} \times 100\text{ \mu g/mg} = 5\text{ ppm} \implies \text{Increment} = 0.15\text{ mg/g} \times 100\text{ \mu g/mg} = 15\text{ ppm}

    Correct

    Baseline=0.05 mg/g×1000 \mug/mg=50 ppm  ⟹  Increment=0.15 mg/g×1000 \mug/mg=150 ppm\text{Baseline} = 0.05\text{ mg/g} \times 1000\text{ \mu g/mg} = 50\text{ ppm} \implies \text{Increment} = 0.15\text{ mg/g} \times 1000\text{ \mu g/mg} = 150\text{ ppm}

    You used the conversion factor 1 mg=100 \mug1\text{ mg} = 100\text{ \mu g}. Because the SI prefix milli- is 10−310^{-3} and micro- is 10−610^{-6}, there are 1000 \mug1000\text{ \mu g} in 1 mg1\text{ mg}.

  2. Step 2

    F2 allele distribution: 0,1,2,3,4 alleles with ratio 1:4:6:4:1  ⟹  Median class has 2 dominant allelesF_2\text{ allele distribution: } 0, 1, 2, 3, 4\text{ alleles with ratio } 1:4:6:4:1 \implies \text{Median class has } 2\text{ dominant alleles}

  3. Step 3

    Concentration=5 ppm+2×15 ppm=35 ppm\text{Concentration} = 5\text{ ppm} + 2 \times 15\text{ ppm} = 35\text{ ppm}

    Correct

    Concentration=50 ppm+2×150 ppm=350 ppm\text{Concentration} = 50\text{ ppm} + 2 \times 150\text{ ppm} = 350\text{ ppm}

    Your additive calculation setup was completely sound, but the final value was off by a factor of 10 due to the unit conversion error in Step 1.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly set up the F2F_2 additive polygenic phenotypic ratio as 1:4:6:4:11:4:6:4:1.

You identified that the median phenotypic class corresponds to 22 dominant contributing alleles.

You accurately structured the additive formula by combining the baseline concentration with the allele contributions.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Metric prefix unit conversion error

You converted milligrams to micrograms using a factor of 100100 instead of 10001000.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused the hecto- or centi- base-10 exponent (10210^2) with the SI difference between milli- (10−310^{-3}) and micro- (10−610^{-6}), which is 103=100010^3 = 1000.

REASONING PATH
Your ACEpath teacher’s suggested approach
Metric prefix scale check
  • 1 mg=10−3 g1\text{ mg} = 10^{-3}\text{ g} and 1 \mug=10−6 g1\text{ \mu g} = 10^{-6}\text{ g}, so 1 mg=1000 \mug1\text{ mg} = 1000\text{ \mu g}.

  • Always verify that moving from milli- to micro- shifts the decimal point by 3 places to the right (multiply by 1000).

Additive model baseline validation
  • Phenotype=Base value+(k×Allele increment)\text{Phenotype} = \text{Base value} + (k \times \text{Allele increment}).

  • Ensure both the baseline and the increment share identical units before evaluating the final concentration.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert baseline to ppm: 0.05 mg/g×1000 \mug/mg=50 \mug/g=50 ppm0.05\text{ mg/g} \times 1000\text{ \mu g/mg} = 50\text{ \mu g/g} = 50\text{ ppm}.

  2. Convert allele increment to ppm: 0.15 mg/g×1000 \mug/mg=150 \mug/g=150 ppm0.15\text{ mg/g} \times 1000\text{ \mu g/mg} = 150\text{ \mu g/g} = 150\text{ ppm}.

  3. Calculate median class pigment concentration: Baseline+2×(increment)=50 ppm+2×150 ppm=350 ppm\text{Baseline} + 2 \times (\text{increment}) = 50\text{ ppm} + 2 \times 150\text{ ppm} = 350\text{ ppm}.

Final answer

Baseline = 50 ppm50\text{ ppm}; increment = 150 ppm150\text{ ppm}; median class = 350 ppm350\text{ ppm}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review SI prefix exponent relationships between grams, milligrams, micrograms, and nanograms.

  • Practice converting concentrations from mg/g\text{mg/g} and g/kg\text{g/kg} directly into ppm\text{ppm} and ppb\text{ppb}.

OverviewACEpath Teacher's Diagnosis

02 A student forgets to add the non-zero baseline pigment concentration when computing the total kernel pigment level for the median class.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Baseline=0.05×1000=50 ppm  ⟹  Increment=0.15×1000=150 ppm\text{Baseline} = 0.05 \times 1000 = 50\text{ ppm} \implies \text{Increment} = 0.15 \times 1000 = 150\text{ ppm}

  2. Step 2

    F2 genotypes have 0 to 4 dominant alleles with frequencies 1:4:6:4:1  ⟹  Median class corresponds to 2 dominant allelesF_2\text{ genotypes have } 0 \text{ to } 4 \text{ dominant alleles with frequencies } 1:4:6:4:1 \implies \text{Median class corresponds to } 2 \text{ dominant alleles}

  3. Step 3

    Concentration=2×150 ppm=300 ppm\text{Concentration} = 2 \times 150\text{ ppm} = 300\text{ ppm}

    Correct

    Concentration=50 ppm+(2×150 ppm)=350 ppm\text{Concentration} = 50\text{ ppm} + (2 \times 150\text{ ppm}) = 350\text{ ppm}

    You calculated only the contribution added by the two dominant alleles (300 ppm300\text{ ppm}) and omitted the non-zero basal pigment concentration of 50 ppm50\text{ ppm} from the null genotype (aabbaabb).

WHAT YOU DID WELL
Compliments from Your Teacher

You accurately converted units using 1 mg/g=1000 ppm1\text{ mg/g} = 1000\text{ ppm}.

You correctly established the F2F_2 phenotypic ratio and determined the median class with 22 dominant alleles.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omitted Baseline in Additive Model

You computed the total phenotype as only the sum of contributing alleles, overlooking the initial baseline value.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

In additive polygenic models, the baseline phenotype is the measurement of the completely recessive genotype (aabbaabb). Total phenotype equals baseline plus the product of contributing alleles and per-allele increment, rather than just the allele contributions alone.

REASONING PATH
Your ACEpath teacher’s suggested approach
Additive Polygenic Formula
  • Phenotype=Base value (aabb)+(Number of contributing alleles×Effect per allele)\text{Phenotype} = \text{Base value } (aabb) + (\text{Number of contributing alleles} \times \text{Effect per allele})

  • Always write out the explicit baseline term first before adding the allelic contributions.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Substitute the baseline concentration (50 ppm50\text{ ppm}) and the two-allele contribution (2×150 ppm=300 ppm2 \times 150\text{ ppm} = 300\text{ ppm}).

  2. Add the baseline to the additive contribution: 50 ppm+300 ppm=350 ppm50\text{ ppm} + 300\text{ ppm} = 350\text{ ppm}.

Final answer

Baseline = 50 ppm50\text{ ppm}; Increment per allele = 150 ppm150\text{ ppm}; Median F2F_2 class = 350 ppm350\text{ ppm}

NEXT STEPS
Final Takeaways from Your Teacher
  • In polygenic inheritance problems, always underline or note whether the baseline recessive genotype has a non-zero value.

  • Verify final phenotypic values by checking that a genotype with zero contributing alleles evaluates to the baseline rather than zero.

OverviewACEpath Teacher's Diagnosis

03 A student misidentifies the median class in the phenotypic range as 1 dominant allele by confusing the number of gene loci (2) with the maximum number of alleles (4).

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Baseline=0.05 mg/g=50 \mug/g=50 ppm  ⟹  Increment=0.15 mg/g=150 \mug/g=150 ppm\text{Baseline} = 0.05\text{ mg/g} = 50\text{ \mu g/g} = 50\text{ ppm} \implies \text{Increment} = 0.15\text{ mg/g} = 150\text{ \mu g/g} = 150\text{ ppm}

  2. Step 2

    Two loci give a range of 0 to 2 dominant alleles  ⟹  Median class has 1 dominant allele\text{Two loci give a range of } 0 \text{ to } 2 \text{ dominant alleles} \implies \text{Median class has } 1 \text{ dominant allele}

    Correct

    For 2 diploid loci (A,B), the number of dominant alleles ranges from 0 (aabb) to 4 (AABB).The median F2 class has 2 dominant alleles.\text{For } 2 \text{ diploid loci (}A, B\text{), the number of dominant alleles ranges from } 0 \text{ (}aabb\text{) to } 4 \text{ (}AABB\text{)}. \text{The median } F_2 \text{ class has } 2 \text{ dominant alleles.}

    In a diploid organism, each gene locus carries two alleles. For two loci (AA and BB), an individual carries 2×2=42 \times 2 = 4 total alleles, making the phenotypic range 00 to 44 contributing alleles with a symmetric median at 22 dominant alleles.

  3. Step 3

    Concentration=50 ppm+1×150 ppm=200 ppm\text{Concentration} = 50\text{ ppm} + 1 \times 150\text{ ppm} = 200\text{ ppm}

    Correct

    Concentration=50 ppm+2×150 ppm=350 ppm\text{Concentration} = 50\text{ ppm} + 2 \times 150\text{ ppm} = 350\text{ ppm}

    You applied the additive formula correctly with your identified allele count, but substituting 11 dominant allele instead of 22 carried the previous mistake into your final concentration.

WHAT YOU DID WELL
Compliments from Your Teacher

You carried out the metric unit conversions from mg/g\text{mg/g} to ppm\text{ppm} without error.

You correctly remembered to add the baseline phenotypic value to the product of allele count and increment.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Loci vs. Alleles Confusion in Polygenic Traits

You equated the number of polygenic loci (22) directly with the maximum number of alleles, forgetting that diploid organisms carry two alleles per locus.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Failing to account for ploidy when tallying polygenic traits. In diploid genetics, nn segregating loci contribute up to 2n2n total alleles. For n=2n = 2 loci, the maximum number of dominant contributing alleles is 2×2=42 \times 2 = 4, yielding classes with 0,1,2,3,0, 1, 2, 3, or 44 dominant alleles and a central median of 22.

REASONING PATH
Your ACEpath teacher’s suggested approach
Calculate Maximum Allele Capacity
  • For nn independently assorting polygenic loci in a diploid organism, the total number of alleles is 2n2n, ranging from 00 to 2n2n contributing alleles.

  • Multiply the number of loci by 22 to find the maximum possible number of contributing alleles before determining phenotypic classes.

Find the Median Class of a Symmetric $F_2$ Polygenic Cross
  • An F1F_1 dihybrid cross (AaBb×AaBbAaBb \times AaBb) produces a binomial phenotypic distribution symmetric around nn contributing alleles out of 2n2n.

  • Verify that the median class corresponds to the peak of the 1:4:6:4:11:4:6:4:1 ratio, which is 22 contributing alleles.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Recognize that 22 loci (AA and BB) in a diploid individual yield 2×2=42 \times 2 = 4 alleles total, spanning 00 dominant alleles (aabbaabb) to 44 dominant alleles (AABBAABB).

  2. Identify the median F2F_2 class from the symmetric 1:4:6:4:11:4:6:4:1 distribution, which corresponds to 22 dominant alleles.

  3. Substitute 22 dominant alleles into the additive concentration formula: Total pigment=50 ppm+(2×150 ppm)=350 ppm\text{Total pigment} = 50\text{ ppm} + (2 \times 150\text{ ppm}) = 350\text{ ppm}.

Final answer

Baseline (aabbaabb) = 50 ppm50\text{ ppm}; increment per dominant allele = 150 ppm150\text{ ppm}; median F2F_2 phenotypic class (22 dominant alleles) = 350 ppm350\text{ ppm}.

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the distinction between gene loci (nn) and total allele count (2n2n) in diploid polygenic inheritance.

  • Practice drawing Pascal's triangle or binomial expansion coefficients to visualize the distribution of contributing alleles in F2F_2 polygenic crosses.

Lock it in

Similar question

01

A tomato fruit weight trait is polygenic and additive across two loci (AA and BB). The base genotype aabbaabb yields fruit weighing 40 g40\text{ g}. Each contributing dominant allele (AA or BB) adds 0.025 kg0.025\text{ kg}. What is the fruit weight in grams for the modal phenotypic class in an F2F_2 generation produced by crossing AABBAABB with aabbaabb?

Answer

The modal class in a two-gene dihybrid F2F_2 has 22 contributing alleles (frequency 6/166/16). Convert each allele increment: 0.025 kg=25 g0.025\text{ kg} = 25\text{ g}. Total weight =40 g+(2×25 g)=90 g= 40\text{ g} + (2 \times 25\text{ g}) = 90\text{ g}.

02

In a polygenic floral scent pathway, three independent additive loci (A,B,CA, B, C) control volatile production. The baseline triple recessive (aabbccaabbcc) emits 0.004 mg/g0.004\text{ mg/g} of linalool. Each dominant contributing allele adds 2.5 μg/g2.5\ \mu\text{g/g}. If an F1F_1 trihybrid (AaBbCcAaBbCc) is testcrossed to aabbccaabbcc, what is the linalool concentration in ppm\text{ppm} of an offspring with exactly 22 dominant alleles?

Answer

Convert baseline to ppm: 0.004 mg/g×1000=4 ppm0.004\text{ mg/g} \times 1000 = 4\text{ ppm}. The allele increment is 2.5 μg/g=2.5 ppm2.5\ \mu\text{g/g} = 2.5\text{ ppm}. For an offspring with 22 dominant alleles: Total=4 ppm+(2×2.5 ppm)=9 ppm\text{Total} = 4\text{ ppm} + (2 \times 2.5\text{ ppm}) = 9\text{ ppm}.

03

In a diploid cereal species, grain protein percentage follows an additive model governed by two loci (P1P_1 and P2P_2). Genotype p1p1p2p2p_1p_1p_2p_2 produces 80 mg80\text{ mg} protein per gram of flour (8%8\%). True-breeding high strain (P1P1P2P2P_1P_1P_2P_2) produces 160 mg/g160\text{ mg/g}. If an F2F_2 population of 320320 plants is grown from selfing F1F_1 hybrids, how many plants are expected to have a protein concentration of exactly 120 mg/g120\text{ mg/g}, and what is that concentration in parts per thousand (ppt\text{ppt}, where 1 ppt=1 mg/g1\text{ ppt} = 1\text{ mg/g})?

Answer

Total increase across 4 alleles is 160−80=80 mg/g160 - 80 = 80\text{ mg/g}, so each allele adds 20 mg/g20\text{ mg/g}. A level of 120 mg/g120\text{ mg/g} requires 80+2(20)80 + 2(20), exactly 22 dominant alleles. The proportion with 22 alleles is 6/16=3/86/16 = 3/8. Number of plants =320×(3/8)=120= 320 \times (3/8) = 120 plants. In ppt, 120 mg/g=120 ppt120\text{ mg/g} = 120\text{ ppt}.

Loading workspace…