Resources

A limnologist surveys phytoplankton biomass across two stratifications of an alpine lake. In Stratum 1, three diatom taxa exhibit dry biomass values of m1=450 mg/m3m_1 = 450\text{ mg/m}^3, m2=1.25 g/m3m_2 = 1.25\text{ g/m}^3, and m3=8.00×105 μg/m3m_3 = 8.00 \times 10^5\,\mu\text{g/m}^3. In order to evaluate biomass-weighted Shannon diversity (HB′=−∑i=1Spiln⁡(pi)H'_B = -\sum_{i=1}^{S} p_i \ln(p_i)), convert all biomass metrics to standard SI units of g/m3\text{g/m}^3, calculate the relative biomass proportions pip_i of each taxon, and compute HB′H'_B. Express the converted biomass values and final HB′H'_B rounded to three significant figures.

Answer and steps

Final answer

m1=0.450 g/m3m_1 = 0.450\text{ g/m}^3, m2=1.25 g/m3m_2 = 1.25\text{ g/m}^3, m3=0.800 g/m3m_3 = 0.800\text{ g/m}^3; HB′=1.02H'_B = 1.02

Steps

01

Convert all biomass values to consistent units (g/m3\text{g/m}^3)

Before determining relative proportions, convert every biomass measurement into grams per cubic meter (g/m3\text{g/m}^3):

  • For Taxon 1 (m1m_1): Since 1 mg=10−3 g1\text{ mg} = 10^{-3}\text{ g}, m1=450 mg/m3×1 g1000 mg=0.450 g/m3m_1 = 450\text{ mg/m}^3 \times \frac{1\text{ g}}{1000\text{ mg}} = 0.450\text{ g/m}^3
  • For Taxon 2 (m2m_2): m2=1.25 g/m3m_2 = 1.25\text{ g/m}^3
  • For Taxon 3 (m3m_3): Since 1 μg=10−6 g1\,\mu\text{g} = 10^{-6}\text{ g}, m3=8.00×105 μg/m3×1 g106 μg=0.800 g/m3m_3 = 8.00 \times 10^5\,\mu\text{g/m}^3 \times \frac{1\text{ g}}{10^6\,\mu\text{g}} = 0.800\text{ g/m}^3

02

Calculate the total biomass and relative proportions (pip_i)

Sum the individual biomasses to obtain the total dry biomass (MtotalM_{\text{total}}): Mtotal=m1+m2+m3=0.450 g/m3+1.25 g/m3+0.800 g/m3=2.50 g/m3M_{\text{total}} = m_1 + m_2 + m_3 = 0.450\text{ g/m}^3 + 1.25\text{ g/m}^3 + 0.800\text{ g/m}^3 = 2.50\text{ g/m}^3

Next, calculate the proportion of total biomass pi=miMtotalp_i = \frac{m_i}{M_{\text{total}}} for each taxon:

  • p1=0.4502.50=0.180p_1 = \frac{0.450}{2.50} = 0.180
  • p2=1.252.50=0.500p_2 = \frac{1.25}{2.50} = 0.500
  • p3=0.8002.50=0.320p_3 = \frac{0.800}{2.50} = 0.320

(Check: 0.180+0.500+0.320=1.0000.180 + 0.500 + 0.320 = 1.000)


03

Compute the biomass-weighted Shannon diversity index (HB′H'_B)

The Shannon diversity index formula is: HB′=−∑i=1Spiln⁡(pi)H'_B = -\sum_{i=1}^{S} p_i \ln(p_i)

Calculate the individual term piln⁡(pi)p_i \ln(p_i) for each taxon using the natural logarithm:

  • For Taxon 1: p1ln⁡(p1)=0.180⋅ln⁡(0.180)≈0.180⋅(−1.7148)≈−0.3087p_1 \ln(p_1) = 0.180 \cdot \ln(0.180) \approx 0.180 \cdot (-1.7148) \approx -0.3087
  • For Taxon 2: p2ln⁡(p2)=0.500⋅ln⁡(0.500)≈0.500⋅(−0.6931)≈−0.3466p_2 \ln(p_2) = 0.500 \cdot \ln(0.500) \approx 0.500 \cdot (-0.6931) \approx -0.3466
  • For Taxon 3: p3ln⁡(p3)=0.320⋅ln⁡(0.320)≈0.320⋅(−1.1394)≈−0.3646p_3 \ln(p_3) = 0.320 \cdot \ln(0.320) \approx 0.320 \cdot (-1.1394) \approx -0.3646

Sum these values: ∑i=13piln⁡(pi)=−0.3087−0.3466−0.3646=−1.0199\sum_{i=1}^{3} p_i \ln(p_i) = -0.3087 - 0.3466 - 0.3646 = -1.0199

Apply the negative sign: HB′=−(−1.0199)=1.0199≈1.02H'_B = -(-1.0199) = 1.0199 \approx 1.02

Common Pitfall: Ensure the natural logarithm (ln⁡\ln, base ee) is used rather than the common logarithm (log⁡10\log_{10}), as the standard biological Shannon index is typically formulated in base ee.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 A student misapplies the metric prefix for micrograms by dividing by 10³ instead of 10⁶, skewing the total biomass and relative proportions.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    m1=450 mg/m3=0.450 g/m3  ⟹  m2=1.25 g/m3  ⟹  m3=8.00×105 μg/m3=800 g/m3m_1 = 450\text{ mg/m}^3 = 0.450\text{ g/m}^3 \implies m_2 = 1.25\text{ g/m}^3 \implies m_3 = 8.00 \times 10^5\,\mu\text{g/m}^3 = 800\text{ g/m}^3

    Correct

    m1=0.450 g/m3m_1 = 0.450\text{ g/m}^3, m2=1.25 g/m3m_2 = 1.25\text{ g/m}^3, m3=8.00×105 μg/m3×1 g106 μg=0.800 g/m3m_3 = 8.00 \times 10^5\,\mu\text{g/m}^3 \times \frac{1\text{ g}}{10^6\,\mu\text{g}} = 0.800\text{ g/m}^3

    You converted m1m_1 accurately, but for m3m_3 you divided by 10310^3 instead of 10610^6. Since 1 g=106 μg1\text{ g} = 10^6\,\mu\text{g}, 8.00×105 μg/m38.00 \times 10^5\,\mu\text{g/m}^3 equals 0.800 g/m30.800\text{ g/m}^3, not 800 g/m3800\text{ g/m}^3.

  2. Step 2

    M=0.450+1.25+800=801.7 g/m3  ⟹  p1=0.450801.7=0.000561,p2=1.25801.7=0.00156,p3=800801.7=0.998M = 0.450 + 1.25 + 800 = 801.7\text{ g/m}^3 \implies p_1 = \frac{0.450}{801.7} = 0.000561, p_2 = \frac{1.25}{801.7} = 0.00156, p_3 = \frac{800}{801.7} = 0.998

    Correct

    Mtotal=0.450+1.25+0.800=2.50 g/m3  ⟹  p1=0.180,p2=0.500,p3=0.320M_{\text{total}} = 0.450 + 1.25 + 0.800 = 2.50\text{ g/m}^3 \implies p_1 = 0.180, p_2 = 0.500, p_3 = 0.320

    Your method for calculating total biomass and relative proportions was correct, but the values were distorted by the conversion error in m3m_3.

  3. Step 3

    HB′=−[0.000561ln⁡(0.000561)+0.00156ln⁡(0.00156)+0.998ln⁡(0.998)]  ⟹  HB′=0.0162H'_B = -[0.000561\ln(0.000561) + 0.00156\ln(0.00156) + 0.998\ln(0.998)] \implies H'_B = 0.0162

    Correct

    HB′=−[0.180ln⁡(0.180)+0.500ln⁡(0.500)+0.320ln⁡(0.320)]≈1.02H'_B = -[0.180\ln(0.180) + 0.500\ln(0.500) + 0.320\ln(0.320)] \approx 1.02

    You correctly applied the Shannon diversity formula using the natural logarithm, but the final numerical value was affected by your earlier proportions.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly converted milligrams to grams by dividing by 10310^3.

You correctly summed the individual biomass values to find the total biomass and computed each relative proportion pi=miMp_i = \frac{m_i}{M}.

You correctly structured and evaluated the Shannon index formula H′=−∑piln⁡(pi)H' = -\sum p_i \ln(p_i) using natural logarithms.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Metric prefix conversion error

You divided micrograms by 10310^3 instead of 10610^6 when converting to grams.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused the micro- prefix (10−610^{-6}) with the milli- prefix (10−310^{-3}), treating 1 g1\text{ g} as 103 μg10^3\,\mu\text{g} rather than 106 μg10^6\,\mu\text{g}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Metric prefixes reference
  • Milli (m\text{m}) represents 10−310^{-3}, while micro (μ\mu) represents 10−610^{-6}. Therefore, 1 g=103 mg=106 μg1\text{ g} = 10^3\text{ mg} = 10^6\,\mu\text{g}.

  • When converting from μg\mu\text{g} to g\text{g}, multiply by 10−610^{-6} (or divide by 10610^6).

Ecological plausibility check
  • A Shannon index of HB′≈0.016H'_B \approx 0.016 indicates complete dominance by one species (proportion near 1.01.0).

  • Always check whether the resulting relative proportions match the magnitude scale of the raw data before completing the index calculation.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert m3m_3 correctly: m3=8.00×105 μg/m3×1 g106 μg=0.800 g/m3m_3 = 8.00 \times 10^5\,\mu\text{g/m}^3 \times \frac{1\text{ g}}{10^6\,\mu\text{g}} = 0.800\text{ g/m}^3.

  2. Find the true total biomass: Mtotal=0.450+1.25+0.800=2.50 g/m3M_{\text{total}} = 0.450 + 1.25 + 0.800 = 2.50\text{ g/m}^3.

  3. Compute corrected proportions: p1=0.4502.50=0.180p_1 = \frac{0.450}{2.50} = 0.180, p2=1.252.50=0.500p_2 = \frac{1.25}{2.50} = 0.500, p3=0.8002.50=0.320p_3 = \frac{0.800}{2.50} = 0.320.

  4. Calculate HB′=−[0.180ln⁡(0.180)+0.500ln⁡(0.500)+0.320ln⁡(0.320)]=−(−0.3087−0.3466−0.3646)=1.02H'_B = -[0.180\ln(0.180) + 0.500\ln(0.500) + 0.320\ln(0.320)] = -(-0.3087 - 0.3466 - 0.3646) = 1.02.

Final answer

m1=0.450 g/m3m_1 = 0.450\text{ g/m}^3, m2=1.25 g/m3m_2 = 1.25\text{ g/m}^3, m3=0.800 g/m3m_3 = 0.800\text{ g/m}^3; HB′=1.02H'_B = 1.02

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice converting between scientific prefixes (kilo-, milli-, micro-, and nano-) using dimensional analysis.

  • Verify that unit conversions bring values into comparable orders of magnitude when sampling within the same community layer.

OverviewACEpath Teacher's Diagnosis

02 A student calculates the Shannon diversity using base-10 logarithm instead of natural logarithm, resulting in an understated diversity value.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    m1=450 mg/m3=0.450 g/m3m_1 = 450\text{ mg/m}^3 = 0.450\text{ g/m}^3, m2=1.25 g/m3m_2 = 1.25\text{ g/m}^3, m3=8.00×105 μg/m3=0.800 g/m3m_3 = 8.00 \times 10^5\,\mu\text{g/m}^3 = 0.800\text{ g/m}^3

  2. Step 2

    M=0.450+1.25+0.800=2.50 g/m3  ⟹  p1=0.4502.50=0.180,  p2=1.252.50=0.500,  p3=0.8002.50=0.320M = 0.450 + 1.25 + 0.800 = 2.50\text{ g/m}^3 \implies p_1 = \frac{0.450}{2.50} = 0.180,\; p_2 = \frac{1.25}{2.50} = 0.500,\; p_3 = \frac{0.800}{2.50} = 0.320

  3. Step 3

    HB′=−[0.180log⁡10(0.180)+0.500log⁡10(0.500)+0.320log⁡10(0.320)]  ⟹  HB′=−[0.180(−0.7447)+0.500(−0.3010)+0.320(−0.4949)]H'_B = -[0.180\log_{10}(0.180) + 0.500\log_{10}(0.500) + 0.320\log_{10}(0.320)] \implies H'_B = -[0.180(-0.7447) + 0.500(-0.3010) + 0.320(-0.4949)]

    Correct

    HB′=−[0.180ln⁡(0.180)+0.500ln⁡(0.500)+0.320ln⁡(0.320)]=−[0.180(−1.7148)+0.500(−0.6931)+0.320(−1.1394)]H'_B = -[0.180\ln(0.180) + 0.500\ln(0.500) + 0.320\ln(0.320)] = -[0.180(-1.7148) + 0.500(-0.6931) + 0.320(-1.1394)]

    You substituted the relative proportions into a base-1010 logarithm (log⁡10\log_{10}) formula instead of the natural logarithm (ln⁡\ln, base ee) specified by the standard Shannon diversity index formula HB′=−∑piln⁡(pi)H'_B = -\sum p_i \ln(p_i).

  4. Step 4

    HB′=0.443H'_B = 0.443

    Correct

    HB′≈1.02H'_B \approx 1.02

    Because base-1010 logarithms were used in Step 3, your final diversity index is understated by a factor of ln⁡(10)≈2.303\ln(10) \approx 2.303.

WHAT YOU DID WELL
Compliments from Your Teacher

You handled the metric prefix conversions across milligrams and micrograms seamlessly.

You calculated the total strata biomass and the individual taxon proportions pip_i flawlessly.

You correctly applied the summation structure and negative sign of the Shannon formulation.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Logarithmic Base Confusion

You used the base-10 logarithm function (log⁡10\log_{10}) instead of the natural logarithm (ln⁡\ln).

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

In ecological diversity metrics, the standard Shannon index (H′H') is traditionally defined using the natural logarithm (base ee). Entering or computing values with log⁡10\log_{10} scales down the true value by a constant factor of ln⁡(10)≈2.303\ln(10) \approx 2.303, leading to an inaccurate diversity measure.

REASONING PATH
Your ACEpath teacher’s suggested approach
Logarithm Base in Ecological Indices
  • Unless a problem explicitly specifies log⁡2\log_2 (bits) or log⁡10\log_{10} (decits), the standard Shannon-Wiener index H′H' strictly utilizes natural logarithms ln⁡(x)\ln(x) (nats).

  • Check your calculator key and formula transcription to ensure you are pressing ln⁡\ln (base ee) and not log⁡\log (base 1010).

Base Conversion Sanity Check
  • If an index is accidentally computed in base 10, it can be converted to base ee using the change-of-base relationship: Hln⁡′=Hlog⁡10′×ln⁡(10)H'_{\ln} = H'_{\log_{10}} \times \ln(10).

  • Notice that 0.443×2.3026≈1.0200.443 \times 2.3026 \approx 1.020, which immediately recovers the correct value.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Calculate each natural log term: p1ln⁡(p1)=0.180×ln⁡(0.180)≈0.180×(−1.7148)=−0.3087p_1 \ln(p_1) = 0.180 \times \ln(0.180) \approx 0.180 \times (-1.7148) = -0.3087

  2. p2ln⁡(p2)=0.500×ln⁡(0.500)≈0.500×(−0.6931)=−0.3466p_2 \ln(p_2) = 0.500 \times \ln(0.500) \approx 0.500 \times (-0.6931) = -0.3466

  3. p3ln⁡(p3)=0.320×ln⁡(0.320)≈0.320×(−1.1394)=−0.3646p_3 \ln(p_3) = 0.320 \times \ln(0.320) \approx 0.320 \times (-1.1394) = -0.3646

  4. Sum the terms and negate: HB′=−(−0.3087−0.3466−0.3646)=−(−1.0199)=1.0199H'_B = -(-0.3087 - 0.3466 - 0.3646) = -(-1.0199) = 1.0199

Final answer

m1=0.450 g/m3m_1 = 0.450\text{ g/m}^3, m2=1.25 g/m3m_2 = 1.25\text{ g/m}^3, m3=0.800 g/m3m_3 = 0.800\text{ g/m}^3; HB′=1.02H'_B = 1.02

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice computing Shannon indices by explicitly verifying whether the prompt calls for natural log ln⁡\ln or another base.

  • Memorize the conversion relationship He′=2.303⋅H10′H'_e = 2.303 \cdot H'_{10} to quickly rescue base-10 calculations on timed assessments.

  • Complete the three targeted practice exercises below to solidify biomass weighting and diversity calculations.

OverviewACEpath Teacher's Diagnosis

03 A student computes Shannon diversity directly using raw numerical biomass values rather than relative proportions p_i, violating the definition of proportion.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    m1=450 mg/m3=0.450 g/m3  ⟹  m2=1.25 g/m3  ⟹  m3=8.00×105 μg/m3=0.800 g/m3m_1 = 450\text{ mg/m}^3 = 0.450\text{ g/m}^3 \implies m_2 = 1.25\text{ g/m}^3 \implies m_3 = 8.00 \times 10^5\,\mu\text{g/m}^3 = 0.800\text{ g/m}^3

  2. Step 2

    HB′=−[0.450ln⁡(0.450)+1.25ln⁡(1.25)+0.800ln⁡(0.800)]  ⟹  HB′=−[0.450(−0.7985)+1.25(0.2231)+0.800(−0.2231)]  ⟹  HB′=0.259H'_B = -[0.450\ln(0.450) + 1.25\ln(1.25) + 0.800\ln(0.800)] \implies H'_B = -[0.450(-0.7985) + 1.25(0.2231) + 0.800(-0.2231)] \implies H'_B = 0.259

    Correct

    Mtotal=0.450+1.25+0.800=2.50 g/m3  ⟹  p1=0.4502.50=0.180, p2=1.252.50=0.500, p3=0.8002.50=0.320  ⟹  HB′=−∑piln⁡(pi)=1.02M_{\text{total}} = 0.450 + 1.25 + 0.800 = 2.50\text{ g/m}^3 \implies p_1 = \frac{0.450}{2.50} = 0.180,\, p_2 = \frac{1.25}{2.50} = 0.500,\, p_3 = \frac{0.800}{2.50} = 0.320 \implies H'_B = -\sum p_i \ln(p_i) = 1.02

    In the Shannon-Wiener index formula, pip_i represents the relative proportion of biomass for taxon ii (pi=miMtotalp_i = \frac{m_i}{M_{\text{total}}}), such that ∑pi=1\sum p_i = 1 and 0<pi<10 < p_i < 1. Because you substituted the raw biomass values mim_i directly, one of your values (1.251.25) exceeded 11, yielding an invalid positive logarithm ln⁡(1.25)>0\ln(1.25) > 0 and distorting the index.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly converted the milligrams and micrograms into standard grams per cubic meter.

You correctly recalled the functional algebraic form of the Shannon diversity summation formula.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Raw Abundance Used Instead of Relative Proportion

You treated raw mass values as if they were already fractional proportions pip_i.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You overlooked the normalization step required to compute relative abundance/biomass proportions (pi=mi/Mtotalp_i = m_i / M_{\text{total}}) before entering values into diversity indices that require ∑pi=1\sum p_i = 1.

REASONING PATH
Your ACEpath teacher’s suggested approach
Range Check for $p_i$
  • Every relative proportion pip_i must satisfy 0≤pi≤10 \le p_i \le 1.

  • If any input inside ln⁡(pi)\ln(p_i) is greater than 11, stop and divide each value by the sum total.

Sum Check
  • The sum of all relative proportions must equal 11 (∑i=1Spi=1.00\sum_{i=1}^S p_i = 1.00).

  • Always sum individual biomasses (Mtotal=∑miM_{\text{total}} = \sum m_i) and divide each mim_i by MtotalM_{\text{total}} before evaluating logarithmic diversity indices.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Calculate total biomass: Mtotal=0.450+1.25+0.800=2.50 g/m3M_{\text{total}} = 0.450 + 1.25 + 0.800 = 2.50\text{ g/m}^3.

  2. Compute relative proportions: p1=0.4502.50=0.180p_1 = \frac{0.450}{2.50} = 0.180, p2=1.252.50=0.500p_2 = \frac{1.25}{2.50} = 0.500, p3=0.8002.50=0.320p_3 = \frac{0.800}{2.50} = 0.320.

  3. Calculate each term piln⁡(pi)p_i \ln(p_i): 0.180ln⁡(0.180)≈−0.30870.180\ln(0.180) \approx -0.3087, 0.500ln⁡(0.500)≈−0.34660.500\ln(0.500) \approx -0.3466, 0.320ln⁡(0.320)≈−0.36460.320\ln(0.320) \approx -0.3646.

  4. Sum the terms and negate: HB′=−(−0.3087−0.3466−0.3646)=−(−1.0199)≈1.02H'_B = -(-0.3087 - 0.3466 - 0.3646) = -(-1.0199) \approx 1.02.

Final answer

m1=0.450 g/m3m_1 = 0.450\text{ g/m}^3, m2=1.25 g/m3m_2 = 1.25\text{ g/m}^3, m3=0.800 g/m3m_3 = 0.800\text{ g/m}^3; HB′=1.02H'_B = 1.02

NEXT STEPS
Final Takeaways from Your Teacher
  • Before applying Shannon's index, always sum your values to verify whether they represent absolute counts/biomasses or relative proportions.

  • Perform a sanity check on your logarithmic terms: because 0<pi≤10 < p_i \le 1, every ln⁡(pi)\ln(p_i) term must be negative or zero.

Lock it in

Similar question

01

A wetland water sample contains two ciliate species with biomasses of m1=250 mg/m3m_1 = 250\text{ mg/m}^3 and m2=7.50×105 μg/m3m_2 = 7.50 \times 10^5\,\mu\text{g/m}^3. Convert both to g/m3\text{g/m}^3 and determine their relative biomass proportions (p1,p2p_1, p_2).

Answer

m1=0.250 g/m3m_1 = 0.250\text{ g/m}^3, m2=0.750 g/m3m_2 = 0.750\text{ g/m}^3. Total biomass M=1.00 g/m3M = 1.00\text{ g/m}^3. Relative proportions: p1=0.2501.00=0.250p_1 = \frac{0.250}{1.00} = 0.250, p2=0.7501.00=0.750p_2 = \frac{0.750}{1.00} = 0.750.

02

An estuarine sample has three phytoplankton taxa with concentrations m1=1.20 g/m3m_1 = 1.20\text{ g/m}^3, m2=800 mg/m3m_2 = 800\text{ mg/m}^3, and m3=2.00×106 μg/m3m_3 = 2.00 \times 10^6\,\mu\text{g/m}^3. Convert all values to g/m3\text{g/m}^3 and compute the biomass-weighted Shannon diversity index HB′H'_B to three significant figures.

Answer

Converted biomasses: m1=1.20 g/m3m_1 = 1.20\text{ g/m}^3, m2=0.800 g/m3m_2 = 0.800\text{ g/m}^3, m3=2.00 g/m3m_3 = 2.00\text{ g/m}^3. Total M=4.00 g/m3M = 4.00\text{ g/m}^3. Proportions: p1=0.300p_1 = 0.300, p2=0.200p_2 = 0.200, p3=0.500p_3 = 0.500. Calculation: HB′=−[0.300ln⁡(0.300)+0.200ln⁡(0.200)+0.500ln⁡(0.500)]≈−[−0.3612−0.3219−0.3466]=1.03H'_B = -[0.300\ln(0.300) + 0.200\ln(0.200) + 0.500\ln(0.500)] \approx -[-0.3612 - 0.3219 - 0.3466] = 1.03.

03

A microbial ecologist measures three bacterial populations: m1=5.00×104 μg/Lm_1 = 5.00 \times 10^4\,\mu\text{g/L}, m2=1.50×102 mg/Lm_2 = 1.50 \times 10^2\text{ mg/L}, and m3=0.100 g/Lm_3 = 0.100\text{ g/L}. Convert all to g/L\text{g/L}, find the proportions, and calculate the maximum possible Shannon diversity (Hmax⁡′=ln⁡SH'_{\max} = \ln S) alongside the evenness J′=HB′Hmax⁡′J' = \frac{H'_B}{H'_{\max}}. Round to three significant figures.

Answer

Converted values: m1=0.0500 g/Lm_1 = 0.0500\text{ g/L}, m2=0.150 g/Lm_2 = 0.150\text{ g/L}, m3=0.100 g/Lm_3 = 0.100\text{ g/L}. Total M=0.300 g/LM = 0.300\text{ g/L}. Proportions: p1=16≈0.167p_1 = \frac{1}{6} \approx 0.167, p2=12=0.500p_2 = \frac{1}{2} = 0.500, p3=13≈0.333p_3 = \frac{1}{3} \approx 0.333. Shannon index: HB′=−[16ln⁡(16)+12ln⁡(12)+13ln⁡(13)]≈1.01H'_B = -[\frac{1}{6}\ln(\frac{1}{6}) + \frac{1}{2}\ln(\frac{1}{2}) + \frac{1}{3}\ln(\frac{1}{3})] \approx 1.01. Maximum diversity: Hmax⁡′=ln⁡(3)≈1.10H'_{\max} = \ln(3) \approx 1.10. Evenness: J′=1.01141.0986≈0.921J' = \frac{1.0114}{1.0986} \approx 0.921.

Loading workspace…