Resources

In a biological chemistry laboratory, a student standardizes a benchtop digital pH meter calibrated with standard buffers and titrates a 25.00 mL25.00\text{ mL} aliquot of an unbuffered aqueous solution of acetic acid (CH3COOH\text{CH}_3\text{COOH}) using standardized 0.1000 M NaOH0.1000\text{ M}\text{ NaOH} delivered via a precision 50.00 mL50.00\text{ mL} buret. The equivalence point is detected potentiometrically after adding exactly 18.40 mL18.40\text{ mL} of the titrant. The acid dissociation constant of acetic acid is Ka=1.75×10−5K_a = 1.75 \times 10^{-5} (pKa=4.757pK_a = 4.757) at 25.0∘C25.0^\circ\text{C}. (a) Calculate the initial molar concentration of the unbuffered acetic acid sample. (b) Calculate the pH of the titration mixture at the exact midpoint (half-equivalence point) where 9.20 mL9.20\text{ mL} of NaOH\text{NaOH} has been added. (c) At the molecular level, explain how water's high dielectric constant and dual hydrogen-bonding capability stabilize the acetate conjugate base (CH3COO−\text{CH}_3\text{COO}^-) via resonance charge dispersion in the hydration sphere.

Answer and steps

Final answer

(a) Moles of NaOH=0.01840 L×0.1000 M=1.840×10−3 mol\text{NaOH} = 0.01840\text{ L} \times 0.1000\text{ M} = 1.840 \times 10^{-3}\text{ mol}. Since stoichiometric ratio is 1:11:1, [extCH3COOH]0=1.840×10−3 mol0.02500 L=0.07360 M[ ext{CH}_3\text{COOH}]_0 = \frac{1.840 \times 10^{-3}\text{ mol}}{0.02500\text{ L}} = 0.07360\text{ M}. (b) At the half-equivalence point, [CH3COOH]=[CH3COO−][\text{CH}_3\text{COOH}] = [\text{CH}_3\text{COO}^-], so by the Henderson-Hasselbalch equation, pH=pKa+log⁡10(1)=pKa=4.76\text{pH} = pK_a + \log_{10}(1) = pK_a = 4.76. (c) Water molecules solvate the carboxylate head of CH3COO−\text{CH}_3\text{COO}^- by forming directed hydrogen bonds from water's δ+\delta^+ hydrogen atoms to the two partially negative oxygen atoms over which the negative charge is delocalized, stabilizing the conjugate base and shifting the dissociation equilibrium forward.

Steps

01

Write the Balanced Neutralization Reaction

Part (a): Initial Molar Concentration of Acetic Acid

The titration of acetic acid (CHX3COOH\ce{CH3COOH}) with sodium hydroxide (NaOH\ce{NaOH}) follows a 1:11:1 stoichiometric relationship:

CHX3COOH(aq)+OHX−(aq)→CHX3COOX−(aq)+HX2O(l)\ce{CH3COOH(aq) + OH^-(aq) -> CH3COO^-(aq) + H2O(l)}

02

Calculate Moles of Base at the Equivalence Point

At the equivalence point, the moles of added hydroxide ions equal the initial moles of acetic acid present in the aliquot:

Moles of NaOH=MNaOH⋅VNaOH=(0.1000 M)⋅(0.01840 L)=1.840×10−3 mol\text{Moles of }\ce{NaOH} = M_{\ce{NaOH}} \cdot V_{\ce{NaOH}} = (0.1000\text{ M}) \cdot (0.01840\text{ L}) = 1.840 \times 10^{-3}\text{ mol}

03

Determine the Initial Concentration of CHX3COOH\ce{CH3COOH}

Divide the moles of acetic acid by the original volume of the aliquot (25.00 mL=0.02500 L25.00\text{ mL} = 0.02500\text{ L}):

[CHX3COOH]0=1.840×10−3 mol0.02500 L=0.07360 M[\ce{CH3COOH}]_0 = \frac{1.840 \times 10^{-3}\text{ mol}}{0.02500\text{ L}} = 0.07360\text{ M}


Part (b): pH at the Midpoint (Half-Equivalence Point)

01

Relate Species Concentrations at the Midpoint

At exactly half the equivalence volume (V=9.20 mLV = 9.20\text{ mL}), exactly half of the initial CHX3COOH\ce{CH3COOH} has been converted into the conjugate base CHX3COOX−\ce{CH3COO-}:

[CHX3COOH]=[CHX3COOX−][\ce{CH3COOH}] = [\ce{CH3COO-}]

02

Apply the Henderson-Hasselbalch Equation

The Henderson-Hasselbalch equation describes the pH of a buffer solution:

pH=pKa+log⁡10([CHX3COOX−][CHX3COOH])\text{pH} = \text{p}K_a + \log_{10}\left(\frac{[\ce{CH3COO-}]}{[\ce{CH3COOH}]}\right)

Because [CHX3COOX−]=[CHX3COOH][\ce{CH3COO-}] = [\ce{CH3COOH}], the ratio is 11:

log⁡10(1)=0  ⟹  pH=pKa=4.757≈4.76\log_{10}(1) = 0 \implies \text{pH} = \text{p}K_a = 4.757 \approx 4.76

Pitfall to avoid: Do not confuse the half-equivalence point (pH=pKa\text{pH} = \text{p}K_a) with the equivalence point, where only the conjugate base remains and the pH is basic (pH>7\text{pH} > 7) due to hydrolysis.


Part (c): Molecular Mechanism of Hydration and Resonance Stabilization

  1. Resonance Delocalization: In the acetate ion (CHX3COOX−\ce{CH3COO-}), the single negative charge is not localized on one oxygen atom. Instead, it is distributed evenly across both oxygen atoms through resonance, giving each oxygen a partial negative charge of −12-\frac{1}{2}.
  2. Directed Hydrogen Bonding: Water (HX2O\ce{H2O}) is a polar molecule with partial positive charges (δ+\delta^+) on its hydrogen atoms. Multiple water molecules orient themselves within the inner hydration sphere so that their δ+\delta^+ hydrogen atoms form directed hydrogen bonds with the two partially negative oxygens of the carboxylate group (−COOX−-\ce{COO-}).
  3. Dielectric Screening: Bulk water has a high relative permittivity (dielectric constant ϵr≈78.4\epsilon_r \approx 78.4 at 25.0∘C25.0^\circ\text{C}). According to Coulomb's law (F∝1ϵrF \propto \frac{1}{\epsilon_r}), this high dielectric medium significantly attenuates electrostatic attraction between NaX+\ce{Na+} and CHX3COOX−\ce{CH3COO-}, preventing ion pairing.
  4. Thermodynamic Favorability: The favorable enthalpy of hydration combined with resonance stabilization lowers the free energy of CHX3COOX−\ce{CH3COO-}, driving the acid dissociation equilibrium (CHX3COOH+HX2O⇌CHX3COOX−+HX3OX+\ce{CH3COOH + H2O <=> CH3COO- + H3O+}) forward in aqueous solution compared to nonpolar solvents.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student uses the total volume of the mixture instead of the initial sample volume when calculating the initial concentration of acetic acid.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    n(NaOH)=(0.1000 M)(0.01840 L)=0.001840 mol  ⟹  n(CH3COOH)=0.001840 moln(\text{NaOH}) = (0.1000\text{ M})(0.01840\text{ L}) = 0.001840\text{ mol} \implies n(\text{CH}_3\text{COOH}) = 0.001840\text{ mol}

  2. Step 2

    Vtotal=25.00 mL+18.40 mL=43.40 mL=0.04340 L  ⟹  [CH3COOH]=0.001840 mol/0.04340 L=0.04240 MV_{\text{total}} = 25.00\text{ mL} + 18.40\text{ mL} = 43.40\text{ mL} = 0.04340\text{ L} \implies [\text{CH}_3\text{COOH}] = 0.001840\text{ mol} / 0.04340\text{ L} = 0.04240\text{ M}

    Correct

    [CH3COOH]0=1.840×10−3 mol0.02500 L=0.07360 M[\text{CH}_3\text{COOH}]_0 = \frac{1.840 \times 10^{-3}\text{ mol}}{0.02500\text{ L}} = 0.07360\text{ M}

    You divided by the total volume of the mixture (43.40 mL43.40\text{ mL}) instead of the original aliquot volume (25.00 mL25.00\text{ mL}). The question asks for the initial concentration of the unbuffered sample before titrant was added.

  3. Step 3

    At midpoint, [CH3COO−]=[CH3COOH]  ⟹  pH=pKa+log⁡(1)=pKa=4.757\text{At midpoint, }[\text{CH}_3\text{COO}^-] = [\text{CH}_3\text{COOH}] \implies \text{pH} = \text{p}K_a + \log(1) = \text{p}K_a = 4.757

  4. Step 4

    Resonance delocalizes the negative charge over both carboxylate oxygens. Water donates hydrogen bonds from its partially positive hydrogens to each oxygen atom. The high dielectric constant screens charges and reduces electrostatic interactions, stabilizing acetate in solution.

WHAT YOU DID WELL
Compliments from Your Teacher

You calculated the exact moles of titrant added at the equivalence point.

You applied the Henderson-Hasselbalch relationship correctly to find the midpoint pH.

You clearly articulated all three key molecular features that stabilize the acetate conjugate base in water.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Incorrect volume used for initial analyte concentration

You summed the analyte and titrant volumes (25.00 mL+18.40 mL25.00\text{ mL} + 18.40\text{ mL}) and used this total volume as the denominator.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the initial sample volume of an analyte with the total combined solution volume at the titration equivalence point when computing the original concentration.

REASONING PATH
Your ACEpath teacher’s suggested approach
Define the Target Quantity
  • Initial concentration [HA]0[\text{HA}]_0 represents the molarity in the beaker before any titrant is dispensed: [HA]0=nanalyteVsample[\text{HA}]_0 = \frac{n_{\text{analyte}}}{V_{\text{sample}}}.

  • Always identify whether the question asks for the concentration in the original aliquot or the concentration of a species at the equivalence point.

Choose the Correct Volume Denominator
  • Titrant volume added is used strictly to determine the moles of analyte (n=Mtitrant×Vtitrantn = M_{\text{titrant}} \times V_{\text{titrant}}), never to dilute the original unmixed sample.

  • Underline the original sample volume (Vsample=25.00 mLV_{\text{sample}} = 25.00\text{ mL}) at the start of the problem and use only that volume when computing [HA]0[\text{HA}]_0.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the original volume of the acetic acid aliquot: V0=25.00 mL=0.02500 LV_0 = 25.00\text{ mL} = 0.02500\text{ L}.

  2. Divide the moles of acetic acid present (1.840×10−3 mol1.840 \times 10^{-3}\text{ mol}) by the original aliquot volume: [CH3COOH]0=1.840×10−3 mol0.02500 L=0.07360 M[\text{CH}_3\text{COOH}]_0 = \frac{1.840 \times 10^{-3}\text{ mol}}{0.02500\text{ L}} = 0.07360\text{ M}.

Final answer

[CH3COOH]0=0.07360 M[\text{CH}_3\text{COOH}]_0 = 0.07360\text{ M}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review titration volume terminology: distinguish VsampleV_{\text{sample}}, VtitrantV_{\text{titrant}}, and Vtotal=Vsample+VtitrantV_{\text{total}} = V_{\text{sample}} + V_{\text{titrant}}.

  • Practice titration stoichiometry problems by explicitly labeling volumes with subscripts (such as Vacid, initialV_{\text{acid, initial}}) before plugging them into formulas.

OverviewACEpath Teacher's Diagnosis

02 The student attempts to calculate the midpoint pH using the unreacted weak acid Ka equilibrium instead of recognizing the buffer condition pH = pKa.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    n(NaOH)=(0.1000 M)(0.01840 L)=0.001840 mol  ⟹  [CH3COOH]=0.001840 mol0.02500 L=0.07360 Mn(\text{NaOH}) = (0.1000\text{ M})(0.01840\text{ L}) = 0.001840\text{ mol} \implies [\text{CH}_3\text{COOH}] = \frac{0.001840\text{ mol}}{0.02500\text{ L}} = 0.07360\text{ M}

  2. Step 2

    n(CH3COOH remaining)=0.001840 mol−(0.1000 M)(0.00920 L)=0.000920 mol  ⟹  Vtotal=25.00 mL+9.20 mL=0.03420 L  ⟹  [CH3COOH]=0.000920 mol0.03420 L=0.02690 Mn(\text{CH}_3\text{COOH remaining}) = 0.001840\text{ mol} - (0.1000\text{ M})(0.00920\text{ L}) = 0.000920\text{ mol} \implies V_{\text{total}} = 25.00\text{ mL} + 9.20\text{ mL} = 0.03420\text{ L} \implies [\text{CH}_3\text{COOH}] = \frac{0.000920\text{ mol}}{0.03420\text{ L}} = 0.02690\text{ M}

  3. Step 3

    [H+]=Ka×[CH3COOH]=1.75×10−5×0.02690=6.86×10−4 M  ⟹  pH=−log⁡(6.86×10−4)=3.16[\text{H}^+] = \sqrt{K_a \times [\text{CH}_3\text{COOH}]} = \sqrt{1.75 \times 10^{-5} \times 0.02690} = 6.86 \times 10^{-4}\text{ M} \implies \text{pH} = -\log(6.86 \times 10^{-4}) = 3.16

    Correct

    pH=pKa+log⁡10([CH3COO−][CH3COOH])=4.757+log⁡10(1)=4.76\text{pH} = \text{p}K_a + \log_{10}\left(\frac{[\text{CH}_3\text{COO}^-]}{[\text{CH}_3\text{COOH}]}\right) = 4.757 + \log_{10}(1) = 4.76

    You applied the weak acid dissociation formula [H+]=KaC[\text{H}^+] = \sqrt{K_a C}, which is only valid for an unneutralized weak acid in pure water. Adding OH−\text{OH}^- converts half of the acetic acid into its conjugate base CH3COO−\text{CH}_3\text{COO}^-. Because [CH3COOH]=[CH3COO−][\text{CH}_3\text{COOH}] = [\text{CH}_3\text{COO}^-], this is an equimolar buffer solution, so pH=pKa=4.76\text{pH} = \text{p}K_a = 4.76.

  4. Step 4

    Resonance delocalizes the negative charge over both carboxylate oxygens. Water donates hydrogen bonds from its partially positive hydrogens to each oxygen atom. The high dielectric constant screens charges and reduces electrostatic interactions, stabilizing acetate in solution.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the initial molarity of acetic acid using the 1:11:1 stoichiometric titration equivalence.

You accurately determined the remaining moles of weak acid after adding 9.20 mL9.20\text{ mL} of titrant.

You clearly explained the molecular interactions of water polarity, resonance delocalization, and dielectric screening in stabilizing the acetate ion.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Buffer vs Weak Acid Dissociation Confusion

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the partially neutralized titration mixture as an isolated weak acid solution dissociating in water instead of recognizing that neutralizing half of the acid generates an equal amount of conjugate base, establishing a buffer where the Henderson-Hasselbalch equation applies and pH=pKa\text{pH} = \text{p}K_a.

REASONING PATH
Your ACEpath teacher’s suggested approach
Identify Titration State
  • Adding strong base to a weak acid produces its conjugate base via the quantitative neutralization HA+OHX−→AX−+HX2O\ce{HA + OH- -> A- + H2O}. When 0<Vtitrant<Vequiv0 < V_{\text{titrant}} < V_{\text{equiv}}, both HA\ce{HA} and AX−\ce{A-} coexist as a buffer.

  • Check whether conjugate base has been generated by reaction with titrant before choosing an equilibrium formula.

Half-Equivalence Condition
  • At exactly half the equivalence volume (V=12VequivV = \frac{1}{2}V_{\text{equiv}}), exactly half of the initial weak acid has reacted, so [HA]=[AX−][\ce{HA}] = [\ce{A-}].

  • Use the Henderson-Hasselbalch equation pH=pKa+log⁡([AX−][HA])=pKa+log⁡(1)=pKa\text{pH} = \text{p}K_a + \log\left(\frac{[\ce{A-}]}{[\ce{HA}]}\right) = \text{p}K_a + \log(1) = \text{p}K_a directly.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Recognize that neutralizing 0.000920 mol0.000920\text{ mol} of CHX3COOH\ce{CH3COOH} produces 0.000920 mol0.000920\text{ mol} of CHX3COOX−\ce{CH3COO-}.

  2. Notice that in the total volume of 0.03420 L0.03420\text{ L}, [CHX3COOX−]=[CHX3COOH]=0.02690 M[\ce{CH3COO-}] = [\ce{CH3COOH}] = 0.02690\text{ M}.

  3. Substitute these equal concentrations into the Henderson-Hasselbalch equation: pH=pKa+log⁡10(0.02690 M0.02690 M)=4.757+0=4.76\text{pH} = \text{p}K_a + \log_{10}\left(\frac{0.02690\text{ M}}{0.02690\text{ M}}\right) = 4.757 + 0 = 4.76.

Final answer

pH=4.76\text{pH} = 4.76

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the distinction between an unreacted weak acid solution (where [H+]≈KaC[\text{H}^+] \approx \sqrt{K_a C}) and a buffer mixture (where both HA\ce{HA} and AX−\ce{A-} are present).

  • Practice identifying the key titration benchmarks: initial point (pure weak acid), midpoint (buffer, pH=pKa\text{pH} = \text{p}K_a), and equivalence point (weak base hydrolysis).

OverviewACEpath Teacher's Diagnosis

03 The student misidentifies water as acting as a hydrogen-bond acceptor toward acetate rather than a donor to the negatively charged carboxylate oxygens.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    n(NaOH)=(0.1000 M)(0.01840 L)=0.001840 mol  ⟹  [CH3COOH]=0.001840 mol0.02500 L=0.07360 Mn(\text{NaOH}) = (0.1000\text{ M})(0.01840\text{ L}) = 0.001840\text{ mol} \implies [\text{CH}_3\text{COOH}] = \frac{0.001840\text{ mol}}{0.02500\text{ L}} = 0.07360\text{ M}

  2. Step 2

    At half-equivalence point, [CH3COO−]=[CH3COOH]  ⟹  pH=pKa=4.757\text{At half-equivalence point, } [\text{CH}_3\text{COO}^-] = [\text{CH}_3\text{COOH}] \implies \text{pH} = \text{p}K_a = 4.757

  3. Step 3

    Resonance delocalizes the negative charge across both oxygen atoms.\text{Resonance delocalizes the negative charge across both oxygen atoms.}

  4. Step 4

    Oxygen atoms of water act as hydrogen bond acceptors to the acetate ion.\text{Oxygen atoms of water act as hydrogen bond acceptors to the acetate ion.}

    Correct

    Water molecules act as hydrogen bond donors through their δ+ hydrogen atoms to the carboxylate oxygen acceptors.\text{Water molecules act as hydrogen bond donors through their } \delta^+ \text{ hydrogen atoms to the carboxylate oxygen acceptors.}

    The acetate anion (CH3COO−\text{CH}_3\text{COO}^-) carries delocalized negative charge on its oxygen atoms and has no acidic hydrogens to donate. Therefore, the carboxylate oxygens act as hydrogen-bond acceptors, while water molecules act as hydrogen-bond donors via their partially positive (δ+\delta^+) hydrogen atoms.

  5. Step 5

    Water’s high dielectric constant weakens electrostatic attraction between ions, lowering the free energy.\text{Water's high dielectric constant weakens electrostatic attraction between ions, lowering the free energy.}

WHAT YOU DID WELL
Compliments from Your Teacher

You calculated the initial concentration of the acetic acid sample with full precision.

You applied the Henderson-Hasselbalch relationship correctly at the titration midpoint.

You correctly identified resonance charge delocalization in the acetate ion.

You accurately described how water's high dielectric constant screens electrostatic interactions.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Hydrogen-Bond Donor vs. Acceptor Inversion

You accidentally swapped the hydrogen-bond donor and acceptor roles between the solvent water molecules and the acetate solute.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the hydrogen bond donor (the electronegative atom bearing the covalent bond to the bridging hydrogen, O−H\text{O}-\text{H}) with the hydrogen bond acceptor (the electronegative atom bearing the lone pair that attracts the δ+\delta^+ hydrogen). Because the acetate anion has lost its proton, its oxygen atoms can only accept hydrogen bonds, requiring water to donate.

REASONING PATH
Your ACEpath teacher’s suggested approach
Identify Available Protons
  • A species must possess a polar X−H\text{X}-\text{H} bond (where X=O, N, F\text{X} = \text{O, N, F}) to serve as a hydrogen-bond donor.

  • Check whether the solute has remaining polar hydrogens. Acetate (CH3COO−\text{CH}_3\text{COO}^-) has only nonpolar C−H\text{C}-\text{H} bonds and negatively charged oxygens, meaning it can only function as an acceptor.

Orient Water Dipoles
  • Negative charges attract the δ+\delta^+ end of water dipoles (the hydrogens); positive charges attract the δ−\delta^- end (the oxygen lone pairs).

  • Draw water's H\text{H} atoms pointing directly toward carboxylate oxygens, establishing water as the donor.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Recognize that the deprotonated carboxylate group carries delocalized lone pairs and a net negative charge, making both oxygen atoms Lewis bases and hydrogen-bond acceptors.

  2. Recognize that neutral water molecules possess polar O−H\text{O}-\text{H} bonds with partially positive hydrogen atoms (δ+\delta^+).

  3. State that water molecules act as hydrogen-bond donors, directing their δ+\delta^+ hydrogen atoms toward the partially negative carboxylate oxygens in the inner hydration sphere.

Final answer

Water molecules act as hydrogen-bond donors, using their partially positive hydrogen atoms (δ+\delta^+) to form directed hydrogen bonds with the resonance-delocalized, partially negative oxygen atoms of the acetate anion, which act as hydrogen-bond acceptors.

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice identifying hydrogen-bond donors and acceptors by explicitly highlighting the covalent X−H\text{X}-\text{H} bond donor and the lone-pair acceptor.

  • Sketch the hydration shell around common biological ions (e.g., carboxylates, amines, and phosphates) to reinforce dipole orientation.

Lock it in

Similar question

01

A 20.00 mL20.00\text{ mL} sample of an unknown monoprotic weak acid is titrated to the equivalence point with 14.50 mL14.50\text{ mL} of 0.1200 M KOH0.1200\text{ M }\text{KOH}. Calculate the initial molar concentration of the weak acid.

Answer

nacid=(0.01450 L)(0.1200 M)=1.740×10−3 moln_{\text{acid}} = (0.01450\text{ L})(0.1200\text{ M}) = 1.740 \times 10^{-3}\text{ mol}. Divide by the initial aliquot volume: [HA]0=1.740×10−3 mol0.02000 L=0.08700 M[\text{HA}]_0 = \frac{1.740 \times 10^{-3}\text{ mol}}{0.02000\text{ L}} = 0.08700\text{ M}.

02

A student titrates a 30.00 mL30.00\text{ mL} sample of formic acid (HCOOH\text{HCOOH}) with 0.1500 M NaOH0.1500\text{ M }\text{NaOH}. The equivalence point requires 22.40 mL22.40\text{ mL} of titrant. (a) Determine [HCOOH]0[\text{HCOOH}]_0. (b) What is the concentration of the formate ion (HCOO−\text{HCOO}^-) in the solution at the exact equivalence point (neglecting hydrolysis)?

Answer

(a) n=(0.02240 L)(0.1500 M)=3.360×10−3 moln = (0.02240\text{ L})(0.1500\text{ M}) = 3.360 \times 10^{-3}\text{ mol}. Initial concentration: [HCOOH]0=3.360×10−3 mol0.03000 L=0.1120 M[\text{HCOOH}]_0 = \frac{3.360 \times 10^{-3}\text{ mol}}{0.03000\text{ L}} = 0.1120\text{ M}. (b) At equivalence, Vtotal=30.00 mL+22.40 mL=52.40 mL=0.05240 LV_{\text{total}} = 30.00\text{ mL} + 22.40\text{ mL} = 52.40\text{ mL} = 0.05240\text{ L}. [HCOO−]eq=3.360×10−3 mol0.05240 L=0.06412 M[\text{HCOO}^-]_{\text{eq}} = \frac{3.360 \times 10^{-3}\text{ mol}}{0.05240\text{ L}} = 0.06412\text{ M}.

03

A 25.00 mL25.00\text{ mL} aliquot of 0.0800 M0.0800\text{ M} propanoic acid (pKa=4.87pK_a = 4.87) is titrated with 0.1000 M NaOH0.1000\text{ M }\text{NaOH}. (a) Calculate the volume of titrant needed to reach the equivalence point. (b) Find the pH after adding half of this equivalence volume. (c) Explain why the conjugate propanoate base is more soluble in water than in hexane based on solvent polarity and dielectric properties.

Answer

(a) nacid=(0.02500 L)(0.0800 M)=2.00×10−3 moln_{\text{acid}} = (0.02500\text{ L})(0.0800\text{ M}) = 2.00 \times 10^{-3}\text{ mol}. Vtitrant=2.00×10−3 mol0.1000 M=0.02000 L=20.00 mLV_{\text{titrant}} = \frac{2.00 \times 10^{-3}\text{ mol}}{0.1000\text{ M}} = 0.02000\text{ L} = 20.00\text{ mL}. (b) At half-equivalence (10.00 mL10.00\text{ mL}), [HA]=[A−][\text{HA}] = [\text{A}^-], so pH=pKa=4.87\text{pH} = pK_a = 4.87. (c) Water is highly polar and forms strong directed hydrogen bonds to the carboxylate group, while its high dielectric constant (≈78\approx 78) screens electrostatic attractions; hexane is nonpolar (low dielectric constant ≈1.9\approx 1.9) and cannot form hydrogen bonds, leaving ionic charges unshielded and poorly solvated.

Loading workspace…