Resources

An undergraduate physiology student investigates human cardiac dynamics at rest. A healthy adult volunteer has a resting heart rate of 72 beats/min72\text{ beats/min}, an end-diastolic volume (EDV) of 125 mL125\text{ mL}, and an end-systolic volume (ESV) of 55 mL55\text{ mL}. Calculate (a) the stroke volume (SVSV) in mL\text{mL}, (b) the cardiac output (COCO) in L/min\text{L/min}, and (c) the ejection fraction (EFEF) expressed as a percentage rounded to the nearest tenth.

Answer and steps

Final answer

(a) SV=70 mLSV = 70\text{ mL}; (b) CO=5.04 L/minCO = 5.04\text{ L/min}; (c) EF=56.0%EF = 56.0\%

Steps

01

Calculate Stroke Volume (SVSV)

Stroke volume (SVSV) is the volume of blood pumped out of a ventricle with each heartbeat. It is the difference between the volume of blood in the ventricle at the end of filling or relaxation (end-diastolic volume, EDVEDV) and the volume remaining after contraction (end-systolic volume, ESVESV):

SV=EDV−ESVSV = EDV - ESV

Substitute the given values: SV=125 mL−55 mL=70 mLSV = 125\text{ mL} - 55\text{ mL} = 70\text{ mL}


02

Calculate Cardiac Output (COCO)

Cardiac output (COCO) is the total volume of blood pumped by a ventricle per minute. It equals the product of the heart rate (HRHR) and the stroke volume (SVSV):

CO=HR⋅SVCO = HR \cdot SV

Substitute the known values: CO=72 beats/min⋅70 mL/beat=5040 mL/minCO = 72\text{ beats/min} \cdot 70\text{ mL/beat} = 5040\text{ mL/min}

Convert milliliters per minute (mL/min\text{mL/min}) to liters per minute (L/min\text{L/min}) using the conversion factor 1 L=1000 mL1\text{ L} = 1000\text{ mL}: CO=5040 mL/min1000 mL/L=5.04 L/minCO = \frac{5040\text{ mL/min}}{1000\text{ mL/L}} = 5.04\text{ L/min}

Common pitfall: Forgetting to convert units from mL/min\text{mL/min} to L/min\text{L/min}. Always check the requested units.


03

Calculate Ejection Fraction (EFEF)

Ejection fraction (EFEF) is the percentage of blood ejected from the ventricle relative to the total volume present at the end of diastole:

EF=(SVEDV)⋅100%EF = \left(\frac{SV}{EDV}\right) \cdot 100\%

Substitute the values: EF=(70 mL125 mL)⋅100%=0.56⋅100%=56.0%EF = \left(\frac{70\text{ mL}}{125\text{ mL}}\right) \cdot 100\% = 0.56 \cdot 100\% = 56.0\%

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student calculates ejection fraction relative to end-systolic volume rather than end-diastolic volume, yielding an inflated ejection fraction of 127.3%.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    SV=EDV−ESV  ⟹  SV=125 mL−55 mL=70 mLSV = EDV - ESV \implies SV = 125\text{ mL} - 55\text{ mL} = 70\text{ mL}

  2. Step 2

    CO=HR×SV  ⟹  CO=72×70=5040 mL/min=5.04 L/minCO = HR \times SV \implies CO = 72 \times 70 = 5040\text{ mL/min} = 5.04\text{ L/min}

  3. Step 3

    EF=(SV/ESV)×100%  ⟹  EF=(70/55)×100%=127.3%EF = (SV / ESV) \times 100\% \implies EF = (70 / 55) \times 100\% = 127.3\%

    Correct

    EF=(SVEDV)×100%=(70 mL125 mL)×100%=56.0%EF = \left(\frac{SV}{EDV}\right) \times 100\% = \left(\frac{70\text{ mL}}{125\text{ mL}}\right) \times 100\% = 56.0\%

    You divided by the end-systolic volume (ESVESV) instead of the total filled end-diastolic volume (EDVEDV). Because a ventricle cannot eject more than 100%100\% of the blood it contains prior to contraction, the denominator must be EDVEDV.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly subtracted ESVESV from EDVEDV to obtain the stroke volume.

You calculated the cardiac output accurately and converted the result from mL/min\text{mL/min} to L/min\text{L/min}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Formula Variable Substitution Error

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused end-systolic volume with end-diastolic volume as the baseline capacity in the ejection fraction formula, producing an impossible ejection percentage greater than 100%.

REASONING PATH
Your ACEpath teacher’s suggested approach
Baseline Reference for Ejection Fraction
  • Ejection fraction measures what fraction of the total filled volume was pumped out: EF=SVEDV×100%EF = \frac{SV}{EDV} \times 100\%.

  • Always set the denominator as the maximum ventricular volume before contraction (EDVEDV), ensuring EF≤100%EF \le 100\%.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Recall that ejection fraction is the proportion of total blood in the filled ventricle that gets pumped out: EF=(SVEDV)×100%EF = \left(\frac{SV}{EDV}\right) \times 100\%.

  2. Substitute SV=70 mLSV = 70\text{ mL} and EDV=125 mLEDV = 125\text{ mL}: EF=(70125)×100%EF = \left(\frac{70}{125}\right) \times 100\%.

  3. Evaluate the fraction: 0.56×100%=56.0%0.56 \times 100\% = 56.0\%.

Final answer

(a) SV=70 mLSV = 70\text{ mL}; (b) CO=5.04 L/minCO = 5.04\text{ L/min}; (c) EF=56.0%EF = 56.0\%

NEXT STEPS
Final Takeaways from Your Teacher
  • Always perform a reality check on percentages: the heart cannot eject more blood than the maximum volume it held before pumping (EDVEDV), so EFEF must be under 100%100\%.

  • Practice identifying EDVEDV as total capacity ('starting volume') and ESVESV as residual volume ('leftover volume').

OverviewACEpath Teacher's Diagnosis

02 The student adds rather than subtracts end-systolic volume to find stroke volume, which leads to downstream overestimates in cardiac output and ejection fraction.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    SV=EDV+ESV  ⟹  SV=125 mL+55 mL=180 mLSV = EDV + ESV \implies SV = 125\text{ mL} + 55\text{ mL} = 180\text{ mL}

    Correct

    SV=EDV−ESV=125 mL−55 mL=70 mLSV = EDV - ESV = 125\text{ mL} - 55\text{ mL} = 70\text{ mL}

    Stroke volume is the volume of blood pumped out of the ventricle during a single contraction, which equals the starting volume at the end of filling (EDVEDV) minus the residual volume remaining after contraction (ESVESV). Adding the volumes instead gives an impossible stroke volume greater than the total capacity of the ventricle.

  2. Step 2

    CO=HR×SV  ⟹  CO=72×180=12960 mL/min=12.96 L/minCO = HR \times SV \implies CO = 72 \times 180 = 12960\text{ mL/min} = 12.96\text{ L/min}

    Correct

    CO=HR⋅SV=72 beats/min⋅70 mL/beat=5040 mL/min=5.04 L/minCO = HR \cdot SV = 72\text{ beats/min} \cdot 70\text{ mL/beat} = 5040\text{ mL/min} = 5.04\text{ L/min}

    Your formula CO=HR×SVCO = HR \times SV and your unit conversion from mL/min\text{mL/min} to L/min\text{L/min} were completely correct, but the numerical result was inflated because it used your incorrect stroke volume from part (a).

  3. Step 3

    EF=(SVEDV)×100%  ⟹  EF=(180125)×100%=144.0%EF = \left(\frac{SV}{EDV}\right) \times 100\% \implies EF = \left(\frac{180}{125}\right) \times 100\% = 144.0\%

    Correct

    EF=(SVEDV)⋅100%=(70 mL125 mL)⋅100%=56.0%EF = \left(\frac{SV}{EDV}\right) \cdot 100\% = \left(\frac{70\text{ mL}}{125\text{ mL}}\right) \cdot 100\% = 56.0\%

    You correctly set up the ejection fraction ratio SVEDV×100%\frac{SV}{EDV} \times 100\%, but substituting SV=180 mLSV = 180\text{ mL} led to an ejection fraction of 144.0%144.0\%. Because a ventricle cannot eject more blood than it contains at the end of diastole, an ejection fraction above 100%100\% serves as a key warning sign that SVSV was miscalculated.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recalled and applied the cardiac output formula CO=HR×SVCO = HR \times SV.

You accurately converted milliliters per minute to liters per minute by dividing by 10001000.

You correctly set up the ejection fraction formula as the ratio of stroke volume to end-diastolic volume.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Sign inversion in volume difference

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Conflating ventricular filling and emptying volumes by treating stroke volume as the sum of EDVEDV and ESVESV rather than their difference (SV=EDV−ESVSV = EDV - ESV).

REASONING PATH
Your ACEpath teacher’s suggested approach
Definition of Stroke Volume
  • SV=EDV−ESVSV = EDV - ESV represents the net volume ejected per beat, not total chamber turnover.

  • Always subtract the post-contraction residue (ESVESV) from the pre-contraction full volume (EDVEDV).

Ejection Fraction Sanity Check
  • Ejection fraction must always fall between 0%0\% and 100%100\% (typically 50%–70%50\%\text{--}70\% at rest).

  • If EF>100%EF > 100\%, immediately re-examine stroke volume to ensure SV<EDVSV < EDV.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. SV=EDV−ESV=125 mL−55 mL=70 mLSV = EDV - ESV = 125\text{ mL} - 55\text{ mL} = 70\text{ mL}

  2. CO=HR⋅SV=72 beats/min⋅70 mL/beat=5040 mL/min=5.04 L/minCO = HR \cdot SV = 72\text{ beats/min} \cdot 70\text{ mL/beat} = 5040\text{ mL/min} = 5.04\text{ L/min}

  3. EF=(SVEDV)⋅100%=(70 mL125 mL)⋅100%=56.0%EF = \left(\frac{SV}{EDV}\right) \cdot 100\% = \left(\frac{70\text{ mL}}{125\text{ mL}}\right) \cdot 100\% = 56.0\%

Final answer

(a) SV=70 mLSV = 70\text{ mL}; (b) CO=5.04 L/minCO = 5.04\text{ L/min}; (c) EF=56.0%EF = 56.0\%

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the physiological cardiac cycle to visualize EDVEDV as the full ventricle and ESVESV as the leftover volume after contraction.

  • Always verify that calculated stroke volume is strictly smaller than end-diastolic volume before finding cardiac output and ejection fraction.

OverviewACEpath Teacher's Diagnosis

03 The student forgets to convert cardiac output from milliliters per minute to liters per minute, leaving the answer as 5040 L/min.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    SV=EDV−ESV  ⟹  SV=125−55=70 mLSV = EDV - ESV \implies SV = 125 - 55 = 70\text{ mL}

  2. Step 2

    CO=HR×SV  ⟹  CO=72×70=5040 L/minCO = HR \times SV \implies CO = 72 \times 70 = 5040\text{ L/min}

    Correct

    CO=HR⋅SV=72 beats/min⋅70 mL/beat=5040 mL/min=5.04 L/minCO = HR \cdot SV = 72\text{ beats/min} \cdot 70\text{ mL/beat} = 5040\text{ mL/min} = 5.04\text{ L/min}

    Multiplying heart rate in beats/min\text{beats/min} by stroke volume in mL\text{mL} yields 5040 mL/min5040\text{ mL/min}. You assigned the unit L/min\text{L/min} without dividing by 1000 mL/L1000\text{ mL/L}.

  3. Step 3

    EF=(SVEDV)×100%  ⟹  EF=(70125)×100%=56.0%EF = \left(\frac{SV}{EDV}\right) \times 100\% \implies EF = \left(\frac{70}{125}\right) \times 100\% = 56.0\%

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the stroke volume formula SV=EDV−ESVSV = EDV - ESV to find 70 mL70\text{ mL}.

You accurately identified the relationship between cardiac output, heart rate, and stroke volume.

You correctly calculated the ejection fraction as a percentage rounded to the nearest tenth.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Unit conversion omission

You calculated 72×70=504072 \times 70 = 5040, which gives cardiac output in mL/min\text{mL/min}, but directly labeled the result as L/min\text{L/min}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You skipped the dimensional analysis step that converts volume from milliliters to liters (1 L=1000 mL1\text{ L} = 1000\text{ mL}).

REASONING PATH
Your ACEpath teacher’s suggested approach
Carry explicit units through multiplication
  • (beats/min)⋅(mL/beat)=mL/min(\text{beats/min}) \cdot (\text{mL/beat}) = \text{mL/min}

  • Always write out units during calculation so the derived unit is clear before stating the final answer.

Physiological sanity check
  • Normal adult resting cardiac output is approximately 4 to 6 L/min4\text{ to }6\text{ L/min}.

  • Check whether your final numerical value matches physiological reality; 5040 L/min5040\text{ L/min} would equal over 80 liters80\text{ liters} per second.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. CO=5040 mL/min⋅1 L1000 mLCO = 5040\text{ mL/min} \cdot \frac{1\text{ L}}{1000\text{ mL}}

  2. CO=5.04 L/minCO = 5.04\text{ L/min}

Final answer

(a) SV=70 mLSV = 70\text{ mL}; (b) CO=5.04 L/minCO = 5.04\text{ L/min}; (c) EF=56.0%EF = 56.0\%

NEXT STEPS
Final Takeaways from Your Teacher
  • Include unit symbols inside each intermediate calculation step rather than appending them only to the final number.

  • Perform a physiological sanity check on cardiac output values (5040 L/min5040\text{ L/min} is over 10001000 times higher than total blood volume).

  • Practice converting between metric prefixes (milli- to base units) across hemodynamic equations.

Lock it in

Similar question

01

A resting patient has an end-diastolic volume (EDVEDV) of 140 mL140\text{ mL} and an end-systolic volume (ESVESV) of 63 mL63\text{ mL}. Calculate the ejection fraction (EFEF) as a percentage.

Answer

55.0%55.0\%. First find SV=EDV−ESV=140 mL−63 mL=77 mLSV = EDV - ESV = 140\text{ mL} - 63\text{ mL} = 77\text{ mL}. Then EF=(SVEDV)×100%=(77140)×100%=55.0%EF = \left(\frac{SV}{EDV}\right) \times 100\% = \left(\frac{77}{140}\right) \times 100\% = 55.0\%.

02

An athlete during exercise has a heart rate of 150 beats/min150\text{ beats/min}, an end-diastolic volume of 160 mL160\text{ mL}, and an ejection fraction of 65%65\%. Calculate (a) the stroke volume (SVSV) in mL\text{mL} and (b) the cardiac output (COCO) in L/min\text{L/min}.

Answer

(a) SV=104 mLSV = 104\text{ mL}; (b) CO=15.6 L/minCO = 15.6\text{ L/min}. Since EF=SVEDVEF = \frac{SV}{EDV}, SV=0.65×160 mL=104 mLSV = 0.65 \times 160\text{ mL} = 104\text{ mL}. Cardiac output is CO=150 beats/min×104 mL/beat=15600 mL/min=15.6 L/minCO = 150\text{ beats/min} \times 104\text{ mL/beat} = 15600\text{ mL/min} = 15.6\text{ L/min}.

03

A patient with systolic heart failure has an end-systolic volume (ESVESV) of 110 mL110\text{ mL} and an ejection fraction (EFEF) of 31.25%31.25\%. Find the patient's end-diastolic volume (EDVEDV) in mL\text{mL}.

Answer

EDV=160 mLEDV = 160\text{ mL}. Since SV=EDV−ESVSV = EDV - ESV and EF=SVEDV=1−ESVEDVEF = \frac{SV}{EDV} = 1 - \frac{ESV}{EDV}, we have 0.3125=1−110EDV0.3125 = 1 - \frac{110}{EDV}. Thus 110EDV=0.6875\frac{110}{EDV} = 0.6875, giving EDV=1100.6875=160 mLEDV = \frac{110}{0.6875} = 160\text{ mL}.

Loading workspace…