Resources

A fluorescence micrograph of a mitotic human HeLa cell reveals condensed chromosomes aligned along the equatorial plane. Microtubules are labeled with GFP-tubulin (green), and kinetochores are labeled with RFP-CENP-A (red). A researcher measures that exactly 9292 distinct kinetochore foci are arranged in 4646 pairs under tension across the metaphase plate. If each kinetochore pair is subjected to an inward pulling poleward force of F=400 pNF = 400\text{ pN} per kinetochore exerted by a bundle of 2020 kinetochore microtubules, calculate the average tensile force per individual microtubule protofilament bundle, and identify the exact mitotic sub-stage and cell-cycle checkpoint currently monitoring this bilateral attachment.

Answer and steps

Final answer

Average tensile force per kinetochore microtubule: 20.0 pN20.0\text{ pN}; Mitotic sub-stage: Metaphase; Cell-cycle checkpoint: Spindle Assembly Checkpoint (SAC) / M-phase checkpoint.

Steps

01

Calculation of the Tensile Force per Microtubule

A single kinetochore in a sister chromatid pair is bound by a bundle of n=20n = 20 kinetochore microtubules (k-fibers) pulling toward one spindle pole with a total force of F=400 pNF = 400\text{ pN}.

Assuming the load is distributed evenly across all parallel microtubules in the fiber, the average tensile force per individual microtubule (ff) is:

f=Fnf = \frac{F}{n}

Substitute the given values:

f=400 pN20=20.0 pNf = \frac{400\text{ pN}}{20} = 20.0\text{ pN}


02

Identification of the Mitotic Sub-Stage

  • Observation: The fluorescence micrograph demonstrates that all 4646 replicated chromosomes (9292 sister chromatids) are fully condensed and aligned along the equatorial plane (the metaphase plate). Furthermore, the opposing kinetochores exhibit bilateral tension toward opposite spindle poles.
  • Conclusion: This characteristic configuration corresponds to Metaphase.

03

Identification of the Active Cell-Cycle Checkpoint

  • Mechanism: The transition from metaphase to anaphase requires that every single kinetochore achieves amphitelic (bipolar) attachment to spindle microtubules and experiences tension. Unattached or improperly tensioned kinetochores recruit proteins such as Mad2 and BubR1, which generate the Mitotic Checkpoint Complex (MCC) to inhibit the Anaphase-Promoting Complex/Cyclosome (APC/C\ce{APC/C}).
  • Conclusion: The checkpoint monitoring this attachment and tension is the Spindle Assembly Checkpoint (SAC) (also known as the M-phase checkpoint or mitotic checkpoint). Once all kinetochores are properly aligned and under tension, the SAC is satisfied, allowing the activation of separase and the subsequent separation of sister chromatids.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student calculates force per microtubule using the total force across both sister kinetochores instead of the force acting on a single kinetochore.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Ftotal per pair=400 pN×2=800 pN  ⟹  Force per microtubule=800 pN20=40 pNF_{\text{total per pair}} = 400\text{ pN} \times 2 = 800\text{ pN} \implies \text{Force per microtubule} = \frac{800\text{ pN}}{20} = 40\text{ pN}

    Correct

    Force per microtubule=Fkinetochoren=400 pN20=20.0 pN\text{Force per microtubule} = \frac{F_{\text{kinetochore}}}{n} = \frac{400\text{ pN}}{20} = 20.0\text{ pN}

    The problem specifies that the 400 pN400\text{ pN} poleward force acts on a single kinetochore and is exerted directly by its own bundle of 2020 microtubules. Doubling the force to 800 pN800\text{ pN} accounts for both sister chromatids, but dividing that combined force by 2020 instead of 4040 microtubules overestimates the load on each individual microtubule by a factor of 22.

  2. Step 2

    Metaphase\text{Metaphase}

  3. Step 3

    Spindle assembly checkpoint (SAC)\text{Spindle assembly checkpoint (SAC)}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the mitotic sub-stage as metaphase based on chromosome alignment at the equatorial plane.

You correctly named the Spindle Assembly Checkpoint (SAC) as the mechanism sensing kinetochore attachment and tension.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Force allocation mismatch between pair and individual bundle

You pooled the tensile force of both sister kinetochores into an 800 pN800\text{ pN} pair total, but then divided by the microtubule count of a single kinetochore fiber (2020) instead of the whole pair (4040).

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the mechanical boundary of a single kinetochore-to-pole fiber with the bilateral sister chromatid pair led to mixing pair-level force with single-bundle microtubule counts.

REASONING PATH
Your ACEpath teacher’s suggested approach
Match force to its specific structural bundle
  • Each sister chromatid has its own distinct kinetochore bound by its own dedicated k-fiber bundle pulling toward one pole.

  • Calculate force per filament using the net force on that single kinetochore divided by the microtubules in that single bundle: f=Fsinglenbundlef = \frac{F_{\text{single}}}{n_{\text{bundle}}}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the load acting on one individual kinetochore: F=400 pNF = 400\text{ pN}.

  2. Identify the number of microtubules in the bundle attached to that single kinetochore: n=20n = 20.

  3. Divide the single-kinetochore force by its microtubule count: f=400 pN20=20.0 pNf = \frac{400\text{ pN}}{20} = 20.0\text{ pN}.

Final answer

Average tensile force per kinetochore microtubule: 20.0 pN20.0\text{ pN}; Mitotic sub-stage: Metaphase; Cell-cycle checkpoint: Spindle Assembly Checkpoint (SAC).

NEXT STEPS
Final Takeaways from Your Teacher
  • Draw a free-body diagram of one sister kinetochore to isolate its 2020 microtubules and its 400 pN400\text{ pN} poleward force before setting up the division.

  • Practice biophysics word problems where forces are reported either 'per subunit' or 'per paired complex' to confirm your structural boundaries match.

OverviewACEpath Teacher's Diagnosis

02 The student confuses the spindle assembly checkpoint with the G2/M DNA damage checkpoint because mitosis has already initiated.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Force per microtubule=400 pN20=20 pN\text{Force per microtubule} = \frac{400\text{ pN}}{20} = 20\text{ pN}

  2. Step 2

    Metaphase\text{Metaphase}

  3. Step 3

    G2/M checkpoint\text{G2/M checkpoint}

    Correct

    Spindle Assembly Checkpoint (SAC) / M checkpoint\text{Spindle Assembly Checkpoint (SAC) / M checkpoint}

    The G2/MG_2/M checkpoint occurs before entry into mitosis to verify complete DNA replication and repair. The checkpoint operating inside mitosis at the metaphase-to-anaphase transition to monitor kinetochore-microtubule attachment and tension is the Spindle Assembly Checkpoint (SAC).

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the average tensile force per kinetochore microtubule as 20 pN20\text{ pN}.

You accurately identified the mitotic sub-stage as metaphase from the equatorial chromosome alignment.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Cell-Cycle Checkpoint Misidentification

You selected the checkpoint controlling entry into mitosis rather than the internal mitotic checkpoint monitoring chromosome segregation.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused the G2/MG_2/M checkpoint (which controls commitment to enter prophase by checking DNA integrity and replication) with the Spindle Assembly Checkpoint / M checkpoint (which operates specifically at the metaphase plate to ensure proper bipolar spindle attachment before triggering anaphase).

REASONING PATH
Your ACEpath teacher’s suggested approach
Distinguish Entry from Exit/Transition Checkpoints
  • The G2/MG_2/M checkpoint halts cells in G2G_2 prior to nuclear envelope breakdown; the Spindle Assembly Checkpoint (SAC) halts cells during mitosis at the metaphase-to-anaphase transition.

  • Check whether the cell has already condensed chromosomes and formed a mitotic spindle. If chromosomes are aligned at the metaphase plate, the active regulatory checkpoint is the SAC.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Recognize that chromosomes are already in mitosis and positioned at the metaphase plate.

  2. Identify that bilateral kinetochore tension and amphitelic microtubule attachment prevent Mad2/BubR1 from inhibiting APC/C\ce{APC/C}.

  3. Conclude that the surveillance mechanism ensuring all kinetochores are properly attached before sister chromatid separation is the Spindle Assembly Checkpoint (SAC).

Final answer

Average tensile force: 20.0 pN20.0\text{ pN}; Mitotic sub-stage: Metaphase; Active checkpoint: Spindle Assembly Checkpoint (SAC) / M-phase checkpoint

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the molecular events monitored by each major cell-cycle checkpoint (G1/SG_1/S, G2/MG_2/M, and the Spindle Assembly Checkpoint).

  • Create a timeline diagram marking where Cyclin B-Cdk1 activation (G2/MG_2/M) occurs relative to APC/C\ce{APC/C}-mediated securin destruction (SAC).

OverviewACEpath Teacher's Diagnosis

03 The student confuses metaphase with prometaphase, believing that because checkpoint signaling is active, chromosomes have not yet fully achieved metaphase alignment.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Force per microtubule=400 pN/20=20 pN\text{Force per microtubule} = 400\text{ pN} / 20 = 20\text{ pN}

  2. Step 2

    Prometaphase\text{Prometaphase}

    Correct

    Metaphase\text{Metaphase}

    You identified the stage as prometaphase, but the chromosomes are already fully congregated and aligned along the equatorial plane (metaphase plate) under balanced bilateral tension, which defines metaphase.

  3. Step 3

    Spindle assembly checkpoint (SAC)\text{Spindle assembly checkpoint (SAC)}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the average tensile force per kinetochore microtubule.

You correctly named the Spindle Assembly Checkpoint (SAC) as the monitoring pathway.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Stage misidentification

none

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You likely assumed that active checkpoint surveillance implies prometaphase, forgetting that the cell reaches metaphase once all chromosomes achieve full alignment at the equatorial plate while the checkpoint performs its final clearance before anaphase.

REASONING PATH
Your ACEpath teacher’s suggested approach
Prometaphase vs. Metaphase Criterion
  • Prometaphase involves active chromosome movement (congression) and incomplete alignment, whereas Metaphase is reached when all chromosomes are aligned at the spindle equator under tension.

  • Check the positioning of the full chromosome complement: if all kinetochore pairs are aligned across the metaphase plate under tension, identify the stage as metaphase.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Note that exactly 4646 pairs (9292 kinetochores) are stably aligned at the equatorial plate under bipolar tension.

  2. Recognize that complete equatorial alignment defines metaphase, even though the SAC remains active until all kinetochore attachments are cleared.

Final answer

Average tensile force per kinetochore microtubule: 20.0 pN20.0\text{ pN}; Mitotic sub-stage: Metaphase; Cell-cycle checkpoint: Spindle Assembly Checkpoint (SAC)

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the distinction between chromosome congression during prometaphase and static equatorial alignment during metaphase.

  • Practice identifying mitotic stages from fluorescence micrographs showing tubulin and kinetochore markers.

Lock it in

Similar question

01

A yeast kinetochore binds a single microtubule that exerts a poleward tension of 5 pN5\text{ pN}. What is the average force per microtubule on this kinetochore, and what protein complex acts as the primary physical bridge between the centromeric DNA and the microtubule plus-end?

Answer

Force per microtubule: 5 pN5\text{ pN} (since 5 pN1=5 pN\frac{5\text{ pN}}{1} = 5\text{ pN}). The primary physical bridge is the Ndc80 complex (part of the KMN network).

02

In a mammalian cell, a pair of sister kinetochores is held under bilateral tension at metaphase. The total outward stretching force across the pair is measured at 900 pN900\text{ pN} (with equal and opposite 450 pN450\text{ pN} forces pulling toward each pole). If each kinetochore is bound by 2525 microtubules, calculate the tensile load per microtubule and state what happens to the Spindle Assembly Checkpoint when all 4646 pairs achieve this state.

Answer

Tensile load per microtubule: 450 pN25=18 pN\frac{450\text{ pN}}{25} = 18\text{ pN} (or 900 pN50=18 pN\frac{900\text{ pN}}{50} = 18\text{ pN}). When all pairs achieve stable bipolar attachment and tension, the SAC is satisfied (inactivated), allowing APC/C\ce{APC/C} activation, securin/cyclin B destruction, and anaphase onset.

03

During an in vitro optical trap assay, a single synthetic kinetochore cluster bound to 88 parallel microtubules sustains a total pulling force of 120 pN120\text{ pN}. If 22 microtubules suddenly detach while the total pulling force remains at 120 pN120\text{ pN}, by how much does the average tensile force per remaining microtubule increase?

Answer

Initial force per microtubule: f1=120 pN8=15 pNf_1 = \frac{120\text{ pN}}{8} = 15\text{ pN}. New force per microtubule with 66 microtubules: f2=120 pN6=20 pNf_2 = \frac{120\text{ pN}}{6} = 20\text{ pN}. The average force per remaining microtubule increases by Δf=20 pN−15 pN=5 pN\Delta f = 20\text{ pN} - 15\text{ pN} = 5\text{ pN}.

Loading workspace…