Resources

A plant cell with a solute potential (Ψs\Psi_s) of −0.75 MPa-0.75\text{ MPa} and a pressure potential (Ψp\Psi_p) of +0.20 MPa+0.20\text{ MPa} is placed in an open beaker containing a 0.15 M0.15\text{ M} sucrose solution at 20∘C20^\circ\text{C}. Calculate the solute potential of the surrounding sucrose solution, the initial total water potential (Ψ\Psi) of both the cell and the solution, and determine the net direction of water flow (into the cell, out of the cell, or dynamic equilibrium). Use the formula Ψs=−iCRT\Psi_s = -iCRT, where i=1.0i = 1.0 for sucrose, R=0.00831 L⋅MPa/(mol⋅K)R = 0.00831\text{ L}\cdot\text{MPa}/(\text{mol}\cdot\text{K}), and TT is in Kelvin. Round potentials to three significant figures.

Answer and steps

Final answer

Solution Ψs=−0.365 MPa\Psi_s = -0.365\text{ MPa}; Initial Cell Ψ=−0.550 MPa\Psi = -0.550\text{ MPa}; Initial Solution Ψ=−0.365 MPa\Psi = -0.365\text{ MPa}; Net water flow is into the cell (from higher Ψ\Psi of −0.365 MPa-0.365\text{ MPa} to lower Ψ\Psi of −0.550 MPa-0.550\text{ MPa}).

Steps

01

Calculate the Solute Potential of the Surrounding Solution

The solute potential (Ψs\Psi_s) of a solution is determined by the van 't Hoff formula: Ψs=−iCRT\Psi_s = -iCRT

Convert the temperature from Celsius to Kelvin: T=20∘C+273.15=293.15 KT = 20^\circ\text{C} + 273.15 = 293.15\text{ K}

Substitute the given values into the formula:

  • Ionization constant for sucrose, i=1.0i = 1.0 (sucrose does not dissociate in water)
  • Molar concentration, C=0.15 mol/LC = 0.15\text{ mol/L}
  • Pressure constant, R=0.00831 L⋅MPa/(mol⋅K)R = 0.00831\text{ L}\cdot\text{MPa}/(\text{mol}\cdot\text{K})
  • Temperature, T=293.15 KT = 293.15\text{ K}

Ψs=−(1.0)(0.15)(0.00831)(293.15)≈−0.365 MPa\Psi_s = -(1.0)(0.15)(0.00831)(293.15) \approx -0.365\text{ MPa}


02

Determine the Initial Water Potential of the Surrounding Solution

The total water potential (Ψ\Psi) is the sum of the solute potential (Ψs\Psi_s) and the pressure potential (Ψp\Psi_p): Ψ=Ψs+Ψp\Psi = \Psi_s + \Psi_p

Because the sucrose solution is held in an open beaker at atmospheric pressure, its physical pressure potential is zero (Ψp=0 MPa\Psi_p = 0\text{ MPa}): Ψsolution=−0.365 MPa+0 MPa=−0.365 MPa\Psi_\text{solution} = -0.365\text{ MPa} + 0\text{ MPa} = -0.365\text{ MPa}


03

Calculate the Initial Water Potential of the Plant Cell

For the plant cell, both the solute potential and the turgor pressure (pressure potential) are provided:

  • Ψs=−0.75 MPa\Psi_s = -0.75\text{ MPa}
  • Ψp=+0.20 MPa\Psi_p = +0.20\text{ MPa}

Using the total water potential equation: Ψcell=Ψs+Ψp=−0.75 MPa+0.20 MPa=−0.550 MPa\Psi_\text{cell} = \Psi_s + \Psi_p = -0.75\text{ MPa} + 0.20\text{ MPa} = -0.550\text{ MPa}


04

Determine the Net Direction of Water Movement

Water moves spontaneously down its water potential gradient, flowing from a region of higher (less negative) water potential to a region of lower (more negative) water potential:

  • Surrounding solution: Ψ=−0.365 MPa\Psi = -0.365\text{ MPa}
  • Plant cell: Ψ=−0.550 MPa\Psi = -0.550\text{ MPa}

Because −0.365 MPa>−0.550 MPa-0.365\text{ MPa} > -0.550\text{ MPa}, the water potential of the sucrose solution is higher than that of the plant cell.

Net water flow: Water will move by osmosis into the cell.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student uses the Celsius temperature directly instead of converting to Kelvin, resulting in an incorrect solute potential for the solution and an incorrect water potential.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Ψs=−iCRT  ⟹  Ψs=−(1.0)(0.15)(0.00831)(20)  ⟹  Ψs=−0.0249 MPa\Psi_s = -iCRT \implies \Psi_s = -(1.0)(0.15)(0.00831)(20) \implies \Psi_s = -0.0249\text{ MPa}

    Correct

    Ψs=−iCRT=−(1.0)(0.15)(0.00831)(20+273.15)≈−0.365 MPa\Psi_s = -iCRT = -(1.0)(0.15)(0.00831)(20 + 273.15) \approx -0.365\text{ MPa}

    You used the Celsius temperature T=20∘CT = 20^\circ\text{C} directly. Because the gas constant RR is expressed per Kelvin (L⋅MPa/(mol⋅K)\text{L}\cdot\text{MPa}/(\text{mol}\cdot\text{K})), the temperature must be converted to absolute temperature: T=20+273.15=293.15 KT = 20 + 273.15 = 293.15\text{ K}.

  2. Step 2

    Ψcell=−0.75+0.20=−0.550 MPa\Psi_\text{cell} = -0.75 + 0.20 = -0.550\text{ MPa}

  3. Step 3

    Ψsolution=−0.0249+0=−0.0249 MPa\Psi_\text{solution} = -0.0249 + 0 = -0.0249\text{ MPa}

    Correct

    Ψsolution=Ψs+Ψp=−0.365 MPa+0 MPa=−0.365 MPa\Psi_\text{solution} = \Psi_s + \Psi_p = -0.365\text{ MPa} + 0\text{ MPa} = -0.365\text{ MPa}

    You correctly recognized that an open beaker has Ψp=0 MPa\Psi_p = 0\text{ MPa}, but this step inherited your earlier temperature calculation error for Ψs\Psi_s.

  4. Step 4

    Ψsolution(−0.0249 MPa)>Ψcell(−0.550 MPa)  ⟹  Net water flow is into the cell.\Psi_\text{solution} (-0.0249\text{ MPa}) > \Psi_\text{cell} (-0.550\text{ MPa}) \implies \text{Net water flow is into the cell.}

    Correct

    Ψsolution(−0.365 MPa)>Ψcell(−0.550 MPa)  ⟹  Net water flow is into the cell.\Psi_\text{solution} (-0.365\text{ MPa}) > \Psi_\text{cell} (-0.550\text{ MPa}) \implies \text{Net water flow is into the cell.}

    Your conceptual rule was spot on: water flows from higher (less negative) to lower (more negative) water potential. While your comparison relied on the incorrect value from Step 1, the conclusion happened to be qualitatively correct.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly selected the van 't Hoff formula Ψs=−iCRT\Psi_s = -iCRT.

You correctly identified that the open beaker has a pressure potential of Ψp=0 MPa\Psi_p = 0\text{ MPa}.

You correctly calculated the plant cell's total water potential as −0.550 MPa-0.550\text{ MPa}.

You correctly applied the rule that water moves spontaneously from higher Ψ\Psi to lower Ψ\Psi.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Temperature Unit Conversion Error

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You substituted temperature into the van 't Hoff equation in degrees Celsius (20∘C20^\circ\text{C}) instead of converting to absolute temperature in Kelvin (293.15 K293.15\text{ K}), overlooking that the gas constant RR is defined in units of Kelvin.

REASONING PATH
Your ACEpath teacher’s suggested approach
Check the units of the gas constant $R$
  • Whenever a formula includes the gas constant R=0.00831 L⋅MPa/(mol⋅K)R = 0.00831\text{ L}\cdot\text{MPa}/(\text{mol}\cdot\text{K}), temperature TT must be in Kelvin.

  • Always convert Celsius to Kelvin before substituting: T(K)=T(∘C)+273.15T(\text{K}) = T(^\circ\text{C}) + 273.15.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert the given temperature to Kelvin: T=20∘C+273.15=293.15 KT = 20^\circ\text{C} + 273.15 = 293.15\text{ K}.

  2. Recalculate the solute potential of the sucrose solution: Ψs=−(1.0)(0.15 mol/L)(0.00831 L⋅MPa/(mol⋅K))(293.15 K)≈−0.365 MPa\Psi_s = -(1.0)(0.15\text{ mol/L})(0.00831\text{ L}\cdot\text{MPa}/(\text{mol}\cdot\text{K}))(293.15\text{ K}) \approx -0.365\text{ MPa}.

  3. Determine the initial water potential of the solution in the open beaker: Ψsolution=−0.365 MPa+0 MPa=−0.365 MPa\Psi_\text{solution} = -0.365\text{ MPa} + 0\text{ MPa} = -0.365\text{ MPa}.

  4. Compare the water potentials: Ψsolution(−0.365 MPa)>Ψcell(−0.550 MPa)\Psi_\text{solution} (-0.365\text{ MPa}) > \Psi_\text{cell} (-0.550\text{ MPa}). Water moves down its potential gradient, flowing into the cell.

Final answer

Solution Ψs=−0.365 MPa\Psi_s = -0.365\text{ MPa}; Initial Cell Ψ=−0.550 MPa\Psi = -0.550\text{ MPa}; Initial Solution Ψ=−0.365 MPa\Psi = -0.365\text{ MPa}; Net water flow is into the cell.

NEXT STEPS
Final Takeaways from Your Teacher
  • Double-check that all thermodynamic temperatures are converted to Kelvin (T=∘C+273.15T = ^\circ\text{C} + 273.15) before multiplying.

  • Practice calculating solute potentials with different solutes and temperatures to build automatic unit-checking habits.

OverviewACEpath Teacher's Diagnosis

02 The student believes water flows from a more negative to a less negative water potential, reversing the net direction of water movement.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    T=20+273=293 K  ⟹  Ψs=−(1.0)(0.15)(0.00831)(293)=−0.365 MPaT = 20 + 273 = 293\text{ K} \implies \Psi_s = -(1.0)(0.15)(0.00831)(293) = -0.365\text{ MPa}

  2. Step 2

    Ψcell=−0.75+0.20=−0.550 MPa  ⟹  Ψsolution=−0.365+0=−0.365 MPa\Psi_\text{cell} = -0.75 + 0.20 = -0.550\text{ MPa} \implies \Psi_\text{solution} = -0.365 + 0 = -0.365\text{ MPa}

  3. Step 3

    Water moves from lower potential to higher potential, so net flow is out of the cell.

    Correct

    Water moves from higher water potential (−0.365 MPa-0.365\text{ MPa}) to lower water potential (−0.550 MPa-0.550\text{ MPa}), so net flow is into the cell.

    Water moves spontaneously from a region of higher (less negative) water potential to lower (more negative) water potential. Because −0.365 MPa>−0.550 MPa-0.365\text{ MPa} > -0.550\text{ MPa}, the net water movement is into the cell.

WHAT YOU DID WELL
Compliments from Your Teacher

You converted temperature to Kelvin and accurately evaluated the van 't Hoff formula.

You recognized that an open beaker has a pressure potential of zero.

You correctly summed solute and pressure potentials to find total water potential for both systems.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Direction of Osmotic Flow Misconception

You reversed the direction of the water potential gradient in your written rule.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated water potential movement as going from 'lower to higher' (perhaps confusing it with solute concentration gradients, where water moves toward higher solute concentration) rather than recognizing that free water moves down its own potential gradient from higher (less negative) to lower (more negative) Ψ\Psi.

REASONING PATH
Your ACEpath teacher’s suggested approach
Rule of Water Movement
  • Net water flow is always from higher (less negative) Ψ\Psi to lower (more negative) Ψ\Psi.

  • Always compare the two numerical values algebraically: −0.365>−0.550-0.365 > -0.550, so the solution has the higher water potential.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Compare the total water potentials: Ψsolution=−0.365 MPa\Psi_\text{solution} = -0.365\text{ MPa} and Ψcell=−0.550 MPa\Psi_\text{cell} = -0.550\text{ MPa}.

  2. Identify which is higher: since −0.365>−0.550-0.365 > -0.550, Ψsolution>Ψcell\Psi_\text{solution} > \Psi_\text{cell}.

  3. Apply the directional rule: water moves down its potential gradient from higher Ψ\Psi to lower Ψ\Psi.

Final answer

Net water flow is into the cell.

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice comparing negative numbers on a vertical water-potential ladder to immediately see which potential is higher.

  • Remember the physical analogy: pure water has Ψ=0 MPa\Psi = 0\text{ MPa} (maximum free energy); solutes pull water potential down below zero, so water flows toward the most negative value.

OverviewACEpath Teacher's Diagnosis

03 The student omits the negative sign in the solute potential formula, treating solute potentials as positive values.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    T=20+273=293 K  ⟹  Ψs=(1.0)(0.15)(0.00831)(293)=0.365 MPaT = 20 + 273 = 293\text{ K} \implies \Psi_s = (1.0)(0.15)(0.00831)(293) = 0.365\text{ MPa}

    Correct

    T=20+273=293 K  ⟹  Ψs=−(1.0)(0.15)(0.00831)(293)≈−0.365 MPaT = 20 + 273 = 293\text{ K} \implies \Psi_s = -(1.0)(0.15)(0.00831)(293) \approx -0.365\text{ MPa}

    You correctly converted the temperature to Kelvin and substituted the numerical values into the formula, but you omitted the negative sign in Ψs=−iCRT\Psi_s = -iCRT. Adding solutes always lowers the free energy of water, so solute potential must be zero or negative.

  2. Step 2

    Ψcell=−0.75+0.20=−0.550 MPa\Psi_\text{cell} = -0.75 + 0.20 = -0.550\text{ MPa}

  3. Step 3

    Ψsolution=0.365+0=0.365 MPa\Psi_\text{solution} = 0.365 + 0 = 0.365\text{ MPa}

    Correct

    Ψsolution=−0.365+0=−0.365 MPa\Psi_\text{solution} = -0.365 + 0 = -0.365\text{ MPa}

    You correctly recognized that the pressure potential of an open beaker is 0 MPa0\text{ MPa}, but this step inherited the missing negative sign from Step 1.

  4. Step 4

    Ψsolution(0.365 MPa)>Ψcell(−0.550 MPa)  ⟹  Net water flow is into the cell.\Psi_\text{solution} (0.365\text{ MPa}) > \Psi_\text{cell} (-0.550\text{ MPa}) \implies \text{Net water flow is into the cell.}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly converted the Celsius temperature to Kelvin.

You correctly set the pressure potential of the open beaker to 0 MPa0\text{ MPa}.

You correctly calculated the cell's initial water potential using Ψ=Ψs+Ψp\Psi = \Psi_s + \Psi_p.

You applied the correct principle that water flows down its water potential gradient from higher to lower Ψ\Psi.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omitted Negative Sign in Solute Potential

You omitted the negative sign in the solute potential formula Ψs=−iCRT\Psi_s = -iCRT.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Solute potential represents the reduction in water's chemical potential caused by dissolved solute particles. Pure water at atmospheric pressure has Ψs=0 MPa\Psi_s = 0\text{ MPa}, so any addition of solute makes Ψs\Psi_s strictly negative. Forgetting the leading negative sign in Ψs=−iCRT\Psi_s = -iCRT yields an unphysical positive solute potential.

REASONING PATH
Your ACEpath teacher’s suggested approach
Sign Convention for Solute Potential
  • Pure water at atmospheric pressure has Ψs=0 MPa\Psi_s = 0\text{ MPa}. Adding solute always reduces water potential, meaning Ψs≤0\Psi_s \le 0.

  • Always verify that your computed Ψs\Psi_s is negative by including the leading minus sign in Ψs=−iCRT\Psi_s = -iCRT.

Direction of Osmosis
  • Water moves spontaneously from a region of higher (less negative) water potential to a region of lower (more negative) water potential.

  • Compare the values of Ψ\Psi as signed numbers on a number line (e.g., −0.365 MPa>−0.550 MPa-0.365\text{ MPa} > -0.550\text{ MPa}).

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Ψs=−iCRT=−(1.0)(0.15 M)(0.00831 L⋅MPa/(mol⋅K))(293 K)=−0.365 MPa\Psi_s = -iCRT = -(1.0)(0.15\text{ M})(0.00831\text{ L}\cdot\text{MPa}/(\text{mol}\cdot\text{K}))(293\text{ K}) = -0.365\text{ MPa}

  2. Ψsolution=Ψs+Ψp=−0.365 MPa+0 MPa=−0.365 MPa\Psi_\text{solution} = \Psi_s + \Psi_p = -0.365\text{ MPa} + 0\text{ MPa} = -0.365\text{ MPa}

  3. Ψsolution(−0.365 MPa)>Ψcell(−0.550 MPa)\Psi_\text{solution} (-0.365\text{ MPa}) > \Psi_\text{cell} (-0.550\text{ MPa}), so net water flow is into the cell.

Final answer

Solution Ψs=−0.365 MPa\Psi_s = -0.365\text{ MPa}; Initial Cell Ψ=−0.550 MPa\Psi = -0.550\text{ MPa}; Initial Solution Ψ=−0.365 MPa\Psi = -0.365\text{ MPa}; Net water flow is into the cell.

NEXT STEPS
Final Takeaways from Your Teacher
  • Memorize that solute potential (Ψs\Psi_s) can never be positive; it is always negative or zero.

  • Check your work whenever you calculate Ψs\Psi_s to ensure the negative sign from the formula is preserved in both the substitution and final value.

Lock it in

Similar question

01

Calculate the solute potential (Ψs\Psi_s) of a 0.20 M0.20\text{ M} glucose solution at 25∘C25^\circ\text{C} in an open beaker. Use i=1.0i = 1.0 and R=0.00831 L⋅MPa/(mol⋅K)R = 0.00831\text{ L}\cdot\text{MPa}/(\text{mol}\cdot\text{K}). Round to three significant figures.

Answer

Ψs=−0.496 MPa\Psi_s = -0.496\text{ MPa}. Convert temperature to Kelvin: T=25+273.15=298.15 KT = 25 + 273.15 = 298.15\text{ K}. Then Ψs=−(1.0)(0.20)(0.00831)(298.15)≈−0.496 MPa\Psi_s = -(1.0)(0.20)(0.00831)(298.15) \approx -0.496\text{ MPa}.

02

A plant cell with Ψs=−0.90 MPa\Psi_s = -0.90\text{ MPa} and Ψp=+0.30 MPa\Psi_p = +0.30\text{ MPa} is placed in an open container containing 0.10 M NaCl0.10\text{ M} \ \ce{NaCl} at 27∘C27^\circ\text{C}. For NaCl\ce{NaCl}, i=2.0i = 2.0, and R=0.00831 L⋅MPa/(mol⋅K)R = 0.00831\text{ L}\cdot\text{MPa}/(\text{mol}\cdot\text{K}). Determine the total water potential of both the cell and the solution, and state the direction of net water movement.

Answer

Cell Ψ=−0.60 MPa\Psi = -0.60\text{ MPa}; Solution Ψ=−0.499 MPa\Psi = -0.499\text{ MPa}; Net water flow is into the cell. Cell Ψ=−0.90+0.30=−0.60 MPa\Psi = -0.90 + 0.30 = -0.60\text{ MPa}. For solution: T=27+273.15=300.15 KT = 27 + 273.15 = 300.15\text{ K}, so Ψs=−(2.0)(0.10)(0.00831)(300.15)≈−0.499 MPa\Psi_s = -(2.0)(0.10)(0.00831)(300.15) \approx -0.499\text{ MPa}. Because Ψp=0\Psi_p = 0, Ψsolution=−0.499 MPa\Psi_\text{solution} = -0.499\text{ MPa}. Since −0.499 MPa>−0.60 MPa-0.499\text{ MPa} > -0.60\text{ MPa}, water flows into the cell.

03

A flaccid plant cell with Ψ=−0.650 MPa\Psi = -0.650\text{ MPa} is placed in an open beaker of sucrose solution (i=1.0i = 1.0) at 22∘C22^\circ\text{C}. What molar concentration (CC) of sucrose will place the cell in dynamic equilibrium with no net water movement? Round to three significant figures.

Answer

C=0.265 MC = 0.265\text{ M}. For dynamic equilibrium, Ψsolution=Ψcell=−0.650 MPa\Psi_\text{solution} = \Psi_\text{cell} = -0.650\text{ MPa}. Since Ψp=0\Psi_p = 0, Ψs=−0.650 MPa\Psi_s = -0.650\text{ MPa}. Temperature T=22+273.15=295.15 KT = 22 + 273.15 = 295.15\text{ K}. Using Ψs=−iCRT\Psi_s = -iCRT: −0.650=−(1.0)(C)(0.00831)(295.15)  ⟹  C=0.650(0.00831)(295.15)≈0.265 M-0.650 = -(1.0)(C)(0.00831)(295.15) \implies C = \frac{0.650}{(0.00831)(295.15)} \approx 0.265\text{ M}.

Loading workspace…