Resources

In an aquatic mesocosm, phytoplankton (primary producers) generate an annual net primary production of 1.20×104 kJ/(m2⋅yr)1.20 \times 10^4\text{ kJ}/(\text{m}^2\cdot\text{yr}). Zooplankton (primary consumers) assimilate 1.80×103 kJ/(m2⋅yr)1.80 \times 10^3\text{ kJ}/(\text{m}^2\cdot\text{yr}) of this energy, and small planktivorous fish (secondary consumers) incorporate 2.16×102 kJ/(m2⋅yr)2.16 \times 10^2\text{ kJ}/(\text{m}^2\cdot\text{yr}) into their biomass. Calculate the specific ecological trophic transfer efficiency (TLTE\text{TLTE}) from the primary consumer level to the secondary consumer level, expressed as a percentage.

Answer and steps

Final answer

12.0%12.0\%

Steps

Understanding Trophic Level Transfer Efficiency (TLTE\text{TLTE})

Trophic level transfer efficiency (TLTE\text{TLTE}), also known as ecological efficiency, measures the percentage of energy transferred from one trophic level to the next consecutive trophic level in an ecosystem:

TLTE=Energy at trophic level nEnergy at trophic level (n−1)×100%\text{TLTE} = \frac{\text{Energy at trophic level } n}{\text{Energy at trophic level } (n - 1)} \times 100\%

Here, we are calculating the transfer efficiency specifically from the primary consumers (trophic level n−1n-1) to the secondary consumers (trophic level nn).


Step-by-Step Calculation

  1. Identify the relevant values:

    • Energy incorporated by secondary consumers (small planktivorous fish, trophic level nn): Pn=2.16×102 kJ/(m2⋅yr)P_n = 2.16 \times 10^2\text{ kJ}/(\text{m}^2\cdot\text{yr})
    • Energy assimilated by primary consumers (zooplankton, trophic level n−1n-1): Pn−1=1.80×103 kJ/(m2⋅yr)P_{n-1} = 1.80 \times 10^3\text{ kJ}/(\text{m}^2\cdot\text{yr})
  2. Substitute the values into the transfer efficiency formula: TLTE=2.16×102 kJ/(m2⋅yr)1.80×103 kJ/(m2⋅yr)×100%\text{TLTE} = \frac{2.16 \times 10^2\text{ kJ}/(\text{m}^2\cdot\text{yr})}{1.80 \times 10^3\text{ kJ}/(\text{m}^2\cdot\text{yr})} \times 100\%
  3. Simplify the ratio: 2.16×1021.80×103=2161800=0.120\frac{2.16 \times 10^2}{1.80 \times 10^3} = \frac{216}{1800} = 0.120
  4. Convert to a percentage: TLTE=0.120×100%=12.0%\text{TLTE} = 0.120 \times 100\% = 12.0\%

Common Pitfall to Avoid

  • Using primary production instead of primary consumer energy: Net primary production (1.20×104 kJ/(m2⋅yr)1.20 \times 10^4\text{ kJ}/(\text{m}^2\cdot\text{yr})) represents energy at the producer level. Because the question asks specifically for the efficiency from the primary consumer level to the secondary consumer level, the producer energy is not used in the denominator.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student divides the secondary consumer energy by the primary producer net primary production instead of the preceding primary consumer trophic level, yielding 1.8%.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    $TLTE\text{TLTE} = Energy of secondary consumersEnergy of primary producers\frac{\text{Energy of secondary consumers}}{\text{Energy of primary producers}} ×\times 100%   ⟹  \implies TLTE\text{TLTE} = 2.16×1021.20×104\frac{2.16 \times 10^2}{1.20 \times 10^4} ×\times 100%$$

    Correct

    $TLTE\text{TLTE} = Energy of secondary consumersEnergy of primary consumers\frac{\text{Energy of secondary consumers}}{\text{Energy of primary consumers}} ×\times 100% = 2.16×1021.80×103\frac{2.16 \times 10^2}{1.80 \times 10^3} ×\times 100%$$

    Trophic level transfer efficiency (TLTE\text{TLTE}) measures the percentage of energy transferred between two consecutive trophic levels (n−1→nn-1 \to n). Because you are finding the efficiency from primary consumers to secondary consumers, the denominator must be the primary consumer energy (1.80×103 kJ/(m2⋅yr)1.80 \times 10^3\text{ kJ}/(\text{m}^2\cdot\text{yr})), not the producer net primary production.

  2. Step 2

    $TLTE\text{TLTE} = 0.018 ×\times 100% = 1.8%$$

    Correct

    $TLTE\text{TLTE} = 0.120 ×\times 100% = 12.0%$$

    Your arithmetic and conversion to a percentage were calculated correctly based on your fraction, but the final value is incorrect due to the misidentified denominator in Step 1.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the secondary consumer energy value (2.16×102 kJ/(m2⋅yr)2.16 \times 10^2\text{ kJ}/(\text{m}^2\cdot\text{yr})) as the numerator.

You carried out the division and percentage conversion accurately based on your chosen values.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Wrong trophic level in denominator

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You used the base of the entire ecological pyramid (primary producers) as the denominator rather than the immediately preceding trophic level specified in the question (primary consumers).

REASONING PATH
Your ACEpath teacher’s suggested approach
Identify Adjacent Trophic Levels
  • TLTE=Production at level nProduction at level (n−1)×100%\text{TLTE} = \frac{\text{Production at level } n}{\text{Production at level } (n-1)} \times 100\%

  • Always place the energy of the immediately preceding trophic level in the denominator, rather than total primary production, unless calculating efficiency from producers to primary consumers.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. $TLTE\text{TLTE} = Energy of secondary consumersEnergy of primary consumers\frac{\text{Energy of secondary consumers}}{\text{Energy of primary consumers}} ×\times 100%$$

  2. TLTE\text{TLTE} = 2.16×102 kJ/(m2⋅yr)1.80×103 kJ/(m2⋅yr)\frac{2.16 \times 10^2\text{ kJ}/(\text{m}^2\cdot\text{yr})}{1.80 \times 10^3\text{ kJ}/(\text{m}^2\cdot\text{yr})} ×\times 100%

  3. TLTE=0.120×100%=12.0%\text{TLTE} = 0.120 \times 100\% = 12.0\%

Final answer

12.0%12.0\%

NEXT STEPS
Final Takeaways from Your Teacher
  • Double-check whether an efficiency question asks for transfer between two consecutive trophic levels (TLTE\text{TLTE}) or overall ecological efficiency relative to primary production.

  • Underline the donor trophic level (n−1n-1) and recipient trophic level (nn) in the problem text before writing down the fraction.

OverviewACEpath Teacher's Diagnosis

02 The student calculates the trophic transfer efficiency from primary producers to primary consumers rather than from primary consumers to secondary consumers, resulting in 15%.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    TLTE=(Primary consumersPrimary producers)×100%\text{TLTE} = \left(\frac{\text{Primary consumers}}{\text{Primary producers}}\right) \times 100\%

    Correct

    TLTE=(Secondary consumersPrimary consumers)×100%\text{TLTE} = \left(\frac{\text{Secondary consumers}}{\text{Primary consumers}}\right) \times 100\%

    You selected the wrong pair of trophic levels. The prompt asks for the transfer efficiency from primary consumers to secondary consumers, which requires placing secondary consumer biomass production in the numerator and primary consumer assimilation in the denominator.

  2. Step 2

    TLTE=(1.80×1031.20×104)×100%  ⟹  TLTE=0.15×100%=15%\text{TLTE} = \left(\frac{1.80 \times 10^3}{1.20 \times 10^4}\right) \times 100\% \implies \text{TLTE} = 0.15 \times 100\% = 15\%

    Correct

    TLTE=(2.16×1021.80×103)×100%=0.120×100%=12.0%\text{TLTE} = \left(\frac{2.16 \times 10^2}{1.80 \times 10^3}\right) \times 100\% = 0.120 \times 100\% = 12.0\%

    Your arithmetic and percentage conversion were completely accurate for the values you chose, but the final answer is incorrect due to the trophic levels selected in Step 1.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recalled the general formula structure for trophic level transfer efficiency as a ratio multiplied by 100%100\%.

You performed the scientific notation division and percentage conversion with perfect arithmetic accuracy.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Wrong Trophic Levels Selected

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Defaulting to calculating efficiency between the first two trophic levels (producers to herbivores) instead of verifying the exact source level (n−1n-1) and destination level (nn) specified in the prompt.

REASONING PATH
Your ACEpath teacher’s suggested approach
Identify Specific Trophic Levels
  • TLTE=Production at level nProduction/energy at level (n−1)×100%\text{TLTE} = \frac{\text{Production at level } n}{\text{Production/energy at level } (n-1)} \times 100\%

  • Circle the two specific trophic levels named in the question prompt before writing your fraction.

Match Values to Formula
  • The receiving trophic level is always in the numerator, and the supporting lower trophic level is in the denominator.

  • Check that secondary consumer energy (2.16×102 kJ/(m2⋅yr)2.16 \times 10^2\text{ kJ}/(\text{m}^2\cdot\text{yr})) is in the numerator and primary consumer energy (1.80×103 kJ/(m2⋅yr)1.80 \times 10^3\text{ kJ}/(\text{m}^2\cdot\text{yr})) is in the denominator.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. TLTE=(Secondary consumersPrimary consumers)×100%\text{TLTE} = \left(\frac{\text{Secondary consumers}}{\text{Primary consumers}}\right) \times 100\%

  2. TLTE=(2.16×102 kJ/(m2⋅yr)1.80×103 kJ/(m2⋅yr))×100%\text{TLTE} = \left(\frac{2.16 \times 10^2\text{ kJ}/(\text{m}^2\cdot\text{yr})}{1.80 \times 10^3\text{ kJ}/(\text{m}^2\cdot\text{yr})}\right) \times 100\%

  3. TLTE=0.120×100%=12.0%\text{TLTE} = 0.120 \times 100\% = 12.0\%

Final answer

12.0%12.0\%

NEXT STEPS
Final Takeaways from Your Teacher
  • Always underline the starting and ending trophic levels named in the problem statement before writing down numbers.

  • Practice multi-level ecosystem problems to become comfortable calculating transfer efficiencies across higher links in food chains.

OverviewACEpath Teacher's Diagnosis

03 The student inverts the trophic efficiency ratio by dividing the energy of the lower trophic level by the energy of the higher trophic level, obtaining approximately 833.3%.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    TLTE=(Primary consumersSecondary consumers)×100%\text{TLTE} = \left(\frac{\text{Primary consumers}}{\text{Secondary consumers}}\right) \times 100\%

    Correct

    TLTE=(Energy at trophic level nEnergy at trophic level (n−1))×100%=(Secondary consumersPrimary consumers)×100%\text{TLTE} = \left(\frac{\text{Energy at trophic level } n}{\text{Energy at trophic level } (n-1)}\right) \times 100\% = \left(\frac{\text{Secondary consumers}}{\text{Primary consumers}}\right) \times 100\%

    You inverted the efficiency formula. Ecological trophic transfer efficiency represents the proportion of energy from a lower trophic level that is transferred to and incorporated into the next higher trophic level, so the recipient (higher) level must be in the numerator and the source (lower) level must be in the denominator.

  2. Step 2

    TLTE=(1.80×1032.16×102)×100%\text{TLTE} = \left(\frac{1.80 \times 10^3}{2.16 \times 10^2}\right) \times 100\%

    Correct

    TLTE=(2.16×1021.80×103)×100%\text{TLTE} = \left(\frac{2.16 \times 10^2}{1.80 \times 10^3}\right) \times 100\%

    Because the formula was set up upside down, you substituted the primary consumer energy into the numerator and the secondary consumer energy into the denominator.

  3. Step 3

    TLTE=833.3%\text{TLTE} = 833.3\%

    Correct

    TLTE=12.0%\text{TLTE} = 12.0\%

    Your arithmetic correctly evaluated the inverted fraction 1800216×100%≈833.3%\frac{1800}{216} \times 100\% \approx 833.3\%, but propagating the initial formula error produced an erroneous final percentage.

WHAT YOU DID WELL
Compliments from Your Teacher

You selected the correct energy values for primary consumers (1.80×103 kJ/(m2⋅yr)1.80 \times 10^3\text{ kJ}/(\text{m}^2\cdot\text{yr})) and secondary consumers (2.16×102 kJ/(m2⋅yr)2.16 \times 10^2\text{ kJ}/(\text{m}^2\cdot\text{yr})).

You correctly excluded the primary producer energy since the question focused strictly on the transfer from primary to secondary consumers.

You carried out the division and percentage conversion accurately according to your written fraction.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverted efficiency ratio

You accidentally swapped the numerator and denominator when defining trophic level transfer efficiency.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated efficiency as a ratio without enforcing the concept of input versus output: efficiency is always (output energy incorporated into higher level) / (input energy available from lower level). In any ecosystem, the second law of thermodynamics dictates that ecological transfer efficiency must be well below 100%100\%, usually around 5–20%5\text{--}20\%. An answer over 100%100\% is a clear signal that the ratio was inverted.

REASONING PATH
Your ACEpath teacher’s suggested approach
Efficiency is Output over Input
  • TLTE=Energy at higher level nEnergy at lower level (n−1)×100%\text{TLTE} = \frac{\text{Energy at higher level } n}{\text{Energy at lower level } (n-1)} \times 100\%

  • Always check: Does the energy of the consumer receiving the energy go on top, and does the food source go on the bottom?

Thermodynamic Reality Check
  • Energy is lost as metabolic heat and waste at each step, so higher trophic levels always contain less transferred energy than the level feeding them.

  • If your calculated TLTE\text{TLTE} exceeds 100%100\% (or even 30%30\% in typical ecological systems), immediately check whether you inverted your fraction.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the correct ratio for trophic transfer efficiency: TLTE=Secondary consumersPrimary consumers×100%\text{TLTE} = \frac{\text{Secondary consumers}}{\text{Primary consumers}} \times 100\%.

  2. Substitute the given values: TLTE=2.16×1021.80×103×100%\text{TLTE} = \frac{2.16 \times 10^2}{1.80 \times 10^3} \times 100\%.

  3. Simplify the fraction: 2161800=0.120\frac{216}{1800} = 0.120.

  4. Multiply by 100%100\% to get the final percentage.

Final answer

12.0%12.0\%

NEXT STEPS
Final Takeaways from Your Teacher
  • Memorize the general definition of any efficiency: Efficiency=Useful OutputTotal Input×100%\text{Efficiency} = \frac{\text{Useful Output}}{\text{Total Input}} \times 100\%.

  • Perform a sanity check on every ecological efficiency problem to verify that the value lies in the realistic range of 5% to 20%5\%\text{ to }20\%.

  • Complete the targeted flashcards and practice problems below to master trophic efficiency calculations.

Lock it in

Similar question

01

In a grassland ecosystem, net primary production is 8.00×104 kJ/(m2⋅yr)8.00 \times 10^4\text{ kJ}/(\text{m}^2\cdot\text{yr}). Herbivores (primary consumers) assimilate 9.60×103 kJ/(m2⋅yr)9.60 \times 10^3\text{ kJ}/(\text{m}^2\cdot\text{yr}). Calculate the trophic transfer efficiency from primary producers to primary consumers as a percentage.

Answer

TLTE=9.60×1038.00×104×100%=0.120×100%=12.0%\text{TLTE} = \frac{9.60 \times 10^3}{8.00 \times 10^4} \times 100\% = 0.120 \times 100\% = 12.0\%.

02

In a forest community, primary consumers assimilate 4.50×103 kJ/(m2⋅yr)4.50 \times 10^3\text{ kJ}/(\text{m}^2\cdot\text{yr}). Secondary consumers incorporate 4.05×102 kJ/(m2⋅yr)4.05 \times 10^2\text{ kJ}/(\text{m}^2\cdot\text{yr}), and tertiary consumers incorporate 3.24×101 kJ/(m2⋅yr)3.24 \times 10^1\text{ kJ}/(\text{m}^2\cdot\text{yr}). Calculate the trophic transfer efficiency from secondary consumers to tertiary consumers.

Answer

TLTE=PtertiaryPsecondary×100%=3.24×1014.05×102×100%=0.080×100%=8.0%\text{TLTE} = \frac{P_{\text{tertiary}}}{P_{\text{secondary}}} \times 100\% = \frac{3.24 \times 10^1}{4.05 \times 10^2} \times 100\% = 0.080 \times 100\% = 8.0\%.

03

An ecological food chain consists of phytoplankton (1.50×104 kJ1.50 \times 10^4\text{ kJ}), zooplankton (1.80×103 kJ1.80 \times 10^3\text{ kJ}), and juvenile fish (1.98×102 kJ1.98 \times 10^2\text{ kJ}). A researcher calculates two values: (a) the TLTE\text{TLTE} between primary and secondary consumers, and (b) the overall transfer efficiency from primary producers directly to secondary consumers. Calculate both percentages.

Answer

(a) TLTE=1.98×1021.80×103×100%=11.0%\text{TLTE} = \frac{1.98 \times 10^2}{1.80 \times 10^3} \times 100\% = 11.0\%. (b) Overall efficiency =1.98×1021.50×104×100%=1.32%= \frac{1.98 \times 10^2}{1.50 \times 10^4} \times 100\% = 1.32\%.

Loading workspace…