Resources

In a viral attachment experiment, the binding of viral spikes (ligands) to host cell surface receptors is modeled by a Langmuir adsorption isotherm where the fraction of occupied surface receptors θ\theta is given by θ=[V]Kd+[V]\theta = \frac{[V]}{K_d + [V]}, with dissociation constant Kd=4.0×10−10 MK_d = 4.0 \times 10^{-10}\text{ M}. If the free virion concentration [V][V] approaches an extreme dilute limit of 2.5×10−12 M2.5 \times 10^{-12}\text{ M}, calculate the percentage of host receptors occupied (θ×100%\theta \times 100\%). Then, evaluate the theoretical limiting value of θ\theta as the virion concentration [V]→∞[V] \to \infty.

Answer and steps

Final answer

θ=0.621%\theta = 0.621\% at [V]=2.5×10−12 M[V] = 2.5 \times 10^{-12}\text{ M}; lim⁡[V]→∞θ=1.00\lim_{[V] \to \infty} \theta = 1.00 (100%100\%)

Steps

01

Understand the Binding Model

Viral infection begins when viral surface proteins (such as glycoprotein spikes) recognize and bind specific receptor molecules on the host cell membrane. This reversible attachment can be quantitatively described by a saturation binding equation (identical in form to the Langmuir adsorption isotherm or the Michaelis–Menten equation):

θ=[V]Kd+[V]\theta = \frac{[V]}{K_d + [V]}

where:

  • θ\theta represents the fractional saturation of host cell surface receptors.
  • [V][V] is the concentration of free virions.
  • KdK_d is the equilibrium dissociation constant (4.0×10−10 M4.0 \times 10^{-10}\text{ M}), representing the virion concentration at which half of the available receptors are bound (θ=0.5\theta = 0.5).

02

Calculate Receptor Occupancy at Low Virion Concentration

Given [V]=2.5×10−12 M[V] = 2.5 \times 10^{-12}\text{ M} and Kd=4.0×10−10 M=400×10−12 MK_d = 4.0 \times 10^{-10}\text{ M} = 400 \times 10^{-12}\text{ M}, substitute these values directly into the expression for θ\theta:

θ=2.5×10−12 M4.0×10−10 M+2.5×10−12 M\theta = \frac{2.5 \times 10^{-12}\text{ M}}{4.0 \times 10^{-10}\text{ M} + 2.5 \times 10^{-12}\text{ M}}

Expressing the denominator with a common exponent:

θ=2.5×10−12402.5×10−12=2.5402.5≈0.006211\theta = \frac{2.5 \times 10^{-12}}{402.5 \times 10^{-12}} = \frac{2.5}{402.5} \approx 0.006211

To express this as a percentage:

Percentage occupied=θ×100%≈0.006211×100%≈0.621%\text{Percentage occupied} = \theta \times 100\% \approx 0.006211 \times 100\% \approx 0.621\%

Common Pitfall: When [V]≪Kd[V] \ll K_d, learners sometimes approximate θ≈[V]Kd=2.5×10−124.0×10−10=0.00625\theta \approx \frac{[V]}{K_d} = \frac{2.5 \times 10^{-12}}{4.0 \times 10^{-10}} = 0.00625 (0.625%0.625\%). While this linear approximation is close, retaining the exact denominator [V]Kd+[V]\frac{[V]}{K_d + [V]} yields the exact value of 0.621%0.621\%.


03

Evaluate the Limiting Value as [V]→∞[V] \to \infty

Divide the numerator and denominator by [V][V] to determine the behavior of θ\theta as free virion concentration becomes extremely high:

θ=1Kd[V]+1\theta = \frac{1}{\frac{K_d}{[V]} + 1}

Taking the limit as [V]→∞[V] \to \infty:

lim⁡[V]→∞θ=10+1=1.00 (or 100%)\lim_{[V] \to \infty} \theta = \frac{1}{0 + 1} = 1.00\text{ (or } 100\%\text{)}

Biologically, this reflects receptor saturation: host cells possess a finite number of surface receptor sites. As the virion concentration increases indefinitely, all available host receptors become occupied by viral spikes, reaching a maximum theoretical fractional occupancy of 1.001.00 (100%100\%).

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets to multiply the fractional receptor occupancy θ by 100% when reporting the final percentage.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    θ=[V]Kd+[V]\theta = \frac{[V]}{K_d + [V]}

  2. Step 2

    θ=2.5×10−124.0×10−10+2.5×10−12=2.5×10−124.025×10−10≈0.0062\theta = \frac{2.5 \times 10^{-12}}{4.0 \times 10^{-10} + 2.5 \times 10^{-12}} = \frac{2.5 \times 10^{-12}}{4.025 \times 10^{-10}} \approx 0.0062

  3. Step 3

    Percentage occupied=0.0062%\text{Percentage occupied} = 0.0062\%

    Correct

    Percentage occupied=θ×100%=0.00621×100%≈0.621%\text{Percentage occupied} = \theta \times 100\% = 0.00621 \times 100\% \approx 0.621\%

    To convert a fractional value θ\theta into a percentage, you must multiply by 100%100\%. Here, 0.0062×100%=0.62%0.0062 \times 100\% = 0.62\% rather than 0.0062%0.0062\%.

  4. Step 4

    As [V]→∞, Kd becomes negligible compared to [V]  ⟹  θ→[V][V]=1\text{As }[V] \to \infty,\, K_d \text{ becomes negligible compared to }[V] \implies \theta \to \frac{[V]}{[V]} = 1

WHAT YOU DID WELL
Compliments from Your Teacher

You selected and set up the correct Langmuir isotherm model.

You accurately added values with different scientific exponents in the denominator.

You evaluated the theoretical saturation limit as virion concentration approaches infinity.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Decimal to percentage conversion omission

You found the correct decimal fraction θ≈0.0062\theta \approx 0.0062, but directly attached a percent symbol rather than multiplying by 100%100\%.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing a dimensionless decimal proportion with a percent value by treating the percent sign as a unit label rather than an operation equivalent to multiplying by 1100\frac{1}{100}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Fraction to Percentage Conversion
  • A fraction or proportion pp equals p×100%p \times 100\%. The symbol %\% means ×10−2\times 10^{-2}.

  • Multiply the calculated decimal ratio by 100100 before writing the percent symbol.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Take the fractional occupancy θ≈0.006211\theta \approx 0.006211.

  2. Multiply by 100%100\%: 0.006211×100%=0.621%0.006211 \times 100\% = 0.621\%.

Final answer

θ=0.621%\theta = 0.621\% (or 0.62%0.62\%) at [V]=2.5×10−12 M[V] = 2.5 \times 10^{-12}\text{ M}; lim⁡[V]→∞θ=1.00\lim_{[V] \to \infty} \theta = 1.00 (100%100\%)

NEXT STEPS
Final Takeaways from Your Teacher
  • Always shift the decimal point two places to the right when appending a percent sign to a decimal value.

  • Check that your percentage and decimal fraction represent identical magnitudes: 0.62%=0.00620.62\% = 0.0062.

OverviewACEpath Teacher's Diagnosis

02 The student confuses the dissociation constant formula with a simple ratio [V]/Kd and forgets the denominator term + [V].

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    θ=[V]Kd  ⟹  θ=2.5×10−124.0×10−10=0.00625\theta = \frac{[V]}{K_d} \implies \theta = \frac{2.5 \times 10^{-12}}{4.0 \times 10^{-10}} = 0.00625

    Correct

    θ=[V]Kd+[V]=2.5×10−12 M4.0×10−10 M+2.5×10−12 M≈0.006211\theta = \frac{[V]}{K_d + [V]} = \frac{2.5 \times 10^{-12}\text{ M}}{4.0 \times 10^{-10}\text{ M} + 2.5 \times 10^{-12}\text{ M}} \approx 0.006211

    You used the linear ratio θ=[V]Kd\theta = \frac{[V]}{K_d} instead of the full Langmuir isotherm equation θ=[V]Kd+[V]\theta = \frac{[V]}{K_d + [V]}. While [V]≪Kd[V] \ll K_d makes this a common approximation, calculating exact fractional occupancy requires keeping [V][V] in the denominator.

  2. Step 2

    Percentage occupied=0.00625×100%=0.625%\text{Percentage occupied} = 0.00625 \times 100\% = 0.625\%

    Correct

    Percentage occupied=0.006211×100%≈0.621%\text{Percentage occupied} = 0.006211 \times 100\% \approx 0.621\%

    You correctly converted your decimal fraction to a percentage by multiplying by 100%100\%, but the numerical value was affected by omitting +[V]+ [V] in the previous step.

  3. Step 3

    b)  As \text{ As } [V] →\to ∞\infty,\ θ\theta = [V]Kd\frac{[V]}{K_d} →\to ∞\infty

    Correct

    lim⁡[V]→∞θ=lim⁡[V]→∞[V]Kd+[V]=lim⁡[V]→∞1Kd[V]+1=1.00 (or 100%)\lim_{[V] \to \infty} \theta = \lim_{[V] \to \infty} \frac{[V]}{K_d + [V]} = \lim_{[V] \to \infty} \frac{1}{\frac{K_d}{[V]} + 1} = 1.00\text{ (or } 100\%\text{)}

    Because you used θ=[V]Kd\theta = \frac{[V]}{K_d}, your limit approached infinity. Since θ\theta represents the fraction of occupied receptors, it cannot exceed 1.001.00 (100%100\%). Using the complete expression shows that all receptors become saturated as [V]→∞[V] \to \infty.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly substituted the scientific notation values for virion concentration and the dissociation constant.

You converted your decimal value into a percentage using the proper factor of 100%100\%.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Formula omission error

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated fractional receptor binding as a simple linear ratio [V]Kd\frac{[V]}{K_d} rather than a saturable Langmuir isotherm [V]Kd+[V]\frac{[V]}{K_d + [V]}, overlooking that receptor occupancy is bounded between 0 and 1.

REASONING PATH
Your ACEpath teacher’s suggested approach
Recall the Langmuir Isotherm Definition
  • Reversible receptor binding follows θ=[L]Kd+[L]\theta = \frac{[L]}{K_d + [L]}, where [L][L] is free ligand concentration.

  • Always write down the full denominator (Kd+[L])(K_d + [L]) before substituting numerical values.

Sanity Check Fractional Quantities
  • Fractional occupancy θ\theta is bounded by 0≤θ≤10 \le \theta \le 1 (0%0\% to 100%100\%).

  • If evaluating a limit as concentration grows indefinitely yields a value greater than 1 or ∞\infty, recheck your formula for missing saturation terms.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the complete Langmuir isotherm equation: θ=[V]Kd+[V]\theta = \frac{[V]}{K_d + [V]}.

  2. Substitute [V]=2.5×10−12 M[V] = 2.5 \times 10^{-12}\text{ M} and Kd=4.0×10−10 M=400×10−12 MK_d = 4.0 \times 10^{-10}\text{ M} = 400 \times 10^{-12}\text{ M} into the expression: θ=2.5×10−12400×10−12+2.5×10−12=2.5402.5≈0.006211\theta = \frac{2.5 \times 10^{-12}}{400 \times 10^{-12} + 2.5 \times 10^{-12}} = \frac{2.5}{402.5} \approx 0.006211.

  3. Multiply by 100%100\% to find the occupancy percentage: 0.006211×100%≈0.621%0.006211 \times 100\% \approx 0.621\%.

  4. Evaluate the limit as [V]→∞[V] \to \infty: lim⁡[V]→∞[V]Kd+[V]=lim⁡[V]→∞1Kd[V]+1=10+1=1.00\lim_{[V] \to \infty} \frac{[V]}{K_d + [V]} = \lim_{[V] \to \infty} \frac{1}{\frac{K_d}{[V]} + 1} = \frac{1}{0 + 1} = 1.00 (100%100\%).

Final answer

θ=0.621%\theta = 0.621\% at [V]=2.5×10−12 M[V] = 2.5 \times 10^{-12}\text{ M}; lim⁡[V]→∞θ=1.00\lim_{[V] \to \infty} \theta = 1.00 (100%100\%)

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the biological meaning of saturation: host cells have a finite number of receptors, so occupancy cannot grow without bound.

  • Practice calculating fractional occupancy at various ligand concentrations relative to KdK_d (e.g., [L]=0.1Kd[L] = 0.1 K_d, [L]=Kd[L] = K_d, and [L]=10Kd[L] = 10 K_d).

OverviewACEpath Teacher's Diagnosis

03 The student misinterprets the limit as [V] → ∞ to mean receptors are 100% occupied and writes 100 for the limiting value of θ rather than 1.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    θ=[V]Kd+[V]  ⟹  θ=2.5×10−124.025×10−10≈0.00621  ⟹  Percentage occupied=0.00621×100%=0.621%\theta = \frac{[V]}{Kd + [V]} \implies \theta = \frac{2.5 \times 10^{-12}}{4.025 \times 10^{-10}} \approx 0.00621 \implies \text{Percentage occupied} = 0.00621 \times 100\% = 0.621\%

  2. Step 2

    As \text{As } [V] →\to \infty$$\text{, all receptors become fully saturated}   ⟹  \implies Limiting value of \text{Limiting value of } θ\theta = 100$$

    Correct

    $\lim_{[V] →\to ∞\infty} \theta = \\lim_{[V] \to \infty} \frac{[V]}{K_d + [V]}=1.00 = 1.00\text{ (or }100% 100\%\text{)}$_

    You correctly recognized that the receptors reach complete saturation, but you recorded 100100 as the value of θ\theta. Because θ\theta is defined as a fraction (0≤θ≤10 \le \theta \le 1), the dimensionless limiting value is 11 (or 1.001.00), whereas 100100 represents the percentage (100%100\%).

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly set up the Langmuir adsorption isotherm formula.

You aligned the scientific notation exponents accurately to sum the terms in the denominator.

You correctly converted the low-concentration fractional occupancy to a percentage.

You correctly identified that receptors reach full saturation as virion concentration approaches infinity.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Fraction vs. Percentage Confusion in Limiting Value

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You conflated the dimensionless fractional saturation θ\theta with its percentage representation, writing the raw integer 100100 rather than 11 (or including the percent symbol as 100%100\%).

REASONING PATH
Your ACEpath teacher’s suggested approach
Distinguish Fraction from Percentage
  • The fractional occupancy θ=[V]Kd+[V]\theta = \frac{[V]}{K_d + [V]} strictly ranges over the interval [0,1][0, 1]. To express saturation as a percentage, multiply by 100%100\% to get 100%100\%.

  • Always check whether a variable represents a fraction (maximum 11) or a percentage (maximum 100%100\%) before writing the final numerical value.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Divide the numerator and denominator by [V][V]: θ=1Kd[V]+1\theta = \frac{1}{\frac{K_d}{[V]} + 1}.

  2. Take the limit as [V]→∞[V] \to \infty: lim⁡[V]→∞Kd[V]=0\lim_{[V] \to \infty} \frac{K_d}{[V]} = 0, giving lim⁡[V]→∞θ=10+1=1.00\lim_{[V] \to \infty} \theta = \frac{1}{0 + 1} = 1.00.

Final answer

lim⁡[V]→∞θ=1.00\lim_{[V] \to \infty} \theta = 1.00 (or 100%100\%)

NEXT STEPS
Final Takeaways from Your Teacher
  • Verify variable bounds whenever dealing with fractions or probabilities: ensure 0≤θ≤10 \le \theta \le 1.

  • Keep the explicit %\% sign attached if you intend to state an answer as a percentage.

Lock it in

Similar question

01

A viral capsid protein binds to a cellular entry receptor with Kd=2.0×10−9 MK_d = 2.0 \times 10^{-9}\text{ M}. If the free virion concentration is [V]=1.0×10−11 M[V] = 1.0 \times 10^{-11}\text{ M}, calculate the percentage of receptors occupied (%\% occupied).

Answer

θ=1.0×10−112.0×10−9+1.0×10−11=1.0×10−112.01×10−9≈0.004975\theta = \frac{1.0 \times 10^{-11}}{2.0 \times 10^{-9} + 1.0 \times 10^{-11}} = \frac{1.0 \times 10^{-11}}{2.01 \times 10^{-9}} \approx 0.004975. Multiply by 100%100\% to get 0.498%0.498\%.

02

In a competitive neutralization assay, antibody binding reduces the free viral concentration such that θ\theta drops from 0.400.40 to 0.00800.0080. Express both occupancies as percentages and determine the fold decrease in receptor occupancy.

Answer

0.40=40%0.40 = 40\% and 0.0080=0.80%0.0080 = 0.80\%. The fold decrease is 40%0.80%=50\frac{40\%}{0.80\%} = 50-fold.

03

A cell surface displays Ntotal=50,000N_{\text{total}} = 50{,}000 ACE2 receptors. When exposed to pseudovirus particles with Kd=8.0×10−10 MK_d = 8.0 \times 10^{-10}\text{ M} and [V]=4.0×10−12 M[V] = 4.0 \times 10^{-12}\text{ M}, find: (a) the fractional occupancy θ\theta, (b) the percentage of occupied receptors, and (c) the absolute number of bound receptors per cell.

Answer

(a) θ=4.0×10−128.04×10−10≈0.004975\theta = \frac{4.0 \times 10^{-12}}{8.04 \times 10^{-10}} \approx 0.004975. (b) Percentage occupied =0.004975×100%≈0.498%= 0.004975 \times 100\% \approx 0.498\%. (c) Number bound =50,000×0.004975≈249= 50{,}000 \times 0.004975 \approx 249 receptors per cell.

Loading workspace…