Resources

An investigator studies an uncharacterized membrane transport system in human erythrocytes. Intact red blood cells are suspended in an isotonic physiological buffer (300 mOsm⋅L−1300\ \text{mOsm}\cdot\text{L}^{-1}). The initial uptake velocity (v0v_0) of a radiolabeled hexose derivative (SS) is measured across a range of extracellular substrate concentrations [S][S], yielding the following steady-state kinetics:

  • At [S]=0.50 mM[S] = 0.50\ \text{mM}, v0=14.3 μmol⋅(L cells)−1⋅s−1v_0 = 14.3\ \mu\text{mol}\cdot(\text{L cells})^{-1}\cdot\text{s}^{-1}
  • At [S]=2.00 mM[S] = 2.00\ \text{mM}, v0=33.3 μmol⋅(L cells)−1⋅s−1v_0 = 33.3\ \mu\text{mol}\cdot(\text{L cells})^{-1}\cdot\text{s}^{-1}
  • At [S]=8.00 mM[S] = 8.00\ \text{mM}, v0=50.0 μmol⋅(L cells)−1⋅s−1v_0 = 50.0\ \mu\text{mol}\cdot(\text{L cells})^{-1}\cdot\text{s}^{-1}
  • As [S]→∞[S] \rightarrow \infty, v0v_0 asymptotically plateaus at Vmax⁡=58.8 μmol⋅(L cells)−1⋅s−1V_{\max} = 58.8\ \mu\text{mol}\cdot(\text{L cells})^{-1}\cdot\text{s}^{-1}

In addition, intracellular ATP depletion using 2.0 mM2.0\ \text{mM} sodium azide does not alter v0v_0, and transport ceases when extracellular concentration equals intracellular concentration.

Work backwards from these experimental kinetics and snapshot values to: (1) calculate the intrinsic Michaelis constant (KmK_m) of the transporter to three significant figures; and (2) construct an evidence-based explanation ruling out simple passive diffusion and primary active transport, explicitly deducing the exact transport mechanism operating in these cells.

Answer and steps

Final answer

  1. Using the Lineweaver-Burk relation 1v0=KmVmax⁡1[S]+1Vmax⁡\frac{1}{v_0} = \frac{K_m}{V_{\max}}\frac{1}{[S]} + \frac{1}{V_{\max}} or solving v0=Vmax⁡[S]Km+[S]v_0 = \frac{V_{\max}[S]}{K_m + [S]} with [S]=8.00 mM[S] = 8.00\ \text{mM} and v0=50.0 μmol⋅(L cells)−1⋅s−1v_0 = 50.0\ \mu\text{mol}\cdot(\text{L cells})^{-1}\cdot\text{s}^{-1}: 50.0(Km+8.00)=58.8(8.00)⇒50.0Km+400.0=470.4⇒Km=1.41 mM50.0(K_m + 8.00) = 58.8(8.00) \Rightarrow 50.0 K_m + 400.0 = 470.4 \Rightarrow K_m = 1.41\ \text{mM}. 2. Simple diffusion is ruled out by the hyperbolic saturation kinetics (Vmax⁡V_{\max} plateau due to finite carrier proteins). Active transport is ruled out because transport does not require ATP and equilibrium is reached when [S]in=[S]out[S]_{\text{in}} = [S]_{\text{out}}. Therefore, the mechanism is facilitated diffusion via a specific carrier protein (GLUT-type uniporter).

Steps

Part 1: Calculating the Michaelis Constant (KmK_m)

Carrier-mediated membrane transport exhibits saturation kinetics that follow the standard Michaelis-Menten model:

v0=Vmax⁡[S]Km+[S]v_0 = \frac{V_{\max}[S]}{K_m + [S]}

Where:

  • v0v_0 is the initial uptake rate
  • Vmax⁡=58.8 μmol⋅(L cells)−1⋅s−1V_{\max} = 58.8\ \mu\text{mol}\cdot(\text{L cells})^{-1}\cdot\text{s}^{-1} is the maximum transport capacity
  • [S][S] is the substrate concentration
  • KmK_m is the substrate concentration at which the transport rate reaches 12Vmax⁡\frac{1}{2}V_{\max}

Substitute the experimental data point [S]=8.00 mM[S] = 8.00\ \text{mM} and v0=50.0 μmol⋅(L cells)−1⋅s−1v_0 = 50.0\ \mu\text{mol}\cdot(\text{L cells})^{-1}\cdot\text{s}^{-1} into the equation:

50.0=58.8⋅8.00Km+8.0050.0 = \frac{58.8 \cdot 8.00}{K_m + 8.00}

Rearrange and solve for KmK_m:

50.0(Km+8.00)=470.450.0(K_m + 8.00) = 470.4

50.0Km+400.0=470.450.0 K_m + 400.0 = 470.4

50.0Km=70.450.0 K_m = 70.4

Km=70.450.0=1.408 mM≈1.41 mMK_m = \frac{70.4}{50.0} = 1.408\ \text{mM} \approx 1.41\ \text{mM}


Part 2: Evidence-Based Deduction of the Transport Mechanism

To determine the exact transport mechanism, we evaluate the evidence against the defining characteristics of cellular transport pathways:

  1. Ruling Out Simple Passive Diffusion:

    • Observation: The uptake rate v0v_0 does not increase linearly without bound; instead, it plateaus asymptotically at a maximal velocity (Vmax⁡=58.8 μmol⋅(L cells)−1⋅s−1V_{\max} = 58.8\ \mu\text{mol}\cdot(\text{L cells})^{-1}\cdot\text{s}^{-1}).
    • Reasoning: Simple diffusion across the lipid bilayer obeys Fick's law, producing a strictly linear relationship between concentration gradient and rate of entry. A saturable, hyperbolic curve indicates a finite number of specific binding sites (transporter/carrier proteins) that become fully occupied at high [S][S]. Therefore, the mechanism cannot be simple diffusion.
  2. Ruling Out Primary Active Transport:

    • Observation: Metabolic inhibition via ATP depletion (2.0 mM2.0\ \text{mM} sodium azide) causes no reduction in v0v_0. Furthermore, net transport ceases entirely when [S]in=[S]out[S]_{\text{in}} = [S]_{\text{out}}.
    • Reasoning: Primary active transport relies directly on ATP hydrolysis to move solutes uphill against a concentration gradient, accumulating solute such that [S]in>[S]out[S]_{\text{in}} > [S]_{\text{out}}. Because uptake is completely ATP-independent and halts at chemical equilibrium ([S]in=[S]out[S]_{\text{in}} = [S]_{\text{out}}), the movement is purely passive (downhill).
  3. Conclusion:

    • Because the process is carrier-mediated and saturable (rules out simple diffusion) yet downhill and energy-independent (rules out active transport), the mechanism operating in these human erythrocytes is facilitated diffusion via a carrier protein (uniporter, analogous to GLUT1).

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student confuses the definition of K_m as the substrate concentration at half-maximal velocity with half of the maximum velocity itself.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Km=Vmax⁡2  ⟹  Km=58.82=29.4 mMK_m = \frac{V_{\max}}{2} \implies K_m = \frac{58.8}{2} = 29.4\ \text{mM}

    Correct

    v0=Vmax⁡[S]Km+[S]  ⟹  50.0=58.8(8.00)Km+8.00  ⟹  Km=1.41 mMv_0 = \frac{V_{\max}[S]}{K_m + [S]} \implies 50.0 = \frac{58.8(8.00)}{K_m + 8.00} \implies K_m = 1.41\ \text{mM}

    You defined KmK_m directly as Vmax⁡2\frac{V_{\max}}{2}. KmK_m is the substrate concentration [S][S] on the horizontal axis at which the velocity reaches 12Vmax⁡\frac{1}{2}V_{\max}, not half of the maximal velocity itself. You need to substitute an experimental data pair into the Michaelis-Menten equation to solve for KmK_m.

  2. Step 2

    Simple diffusion is ruled out due to saturation at Vmax⁡V_{\max}.

  3. Step 3

    Active transport is ruled out because ATP depletion has no effect and net transport stops at concentration equilibrium.

  4. Step 4

    The mechanism is facilitated diffusion.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that saturation kinetics (Vmax⁡V_{\max}) eliminate simple passive diffusion.

You recognized that ATP independence and reaching equilibrium at equal internal/external concentrations rule out active transport.

You accurately synthesized the evidence to name facilitated diffusion as the transport mechanism.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Axis confusion between substrate concentration ($K_m$) and half-maximal velocity ($\frac{1}{2}V_{\max}$)

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You conflated the dependent variable (yy-axis velocity, 12Vmax⁡=29.4 μmol⋅(L cells)−1⋅s−1\frac{1}{2}V_{\max} = 29.4\ \mu\text{mol}\cdot(\text{L cells})^{-1}\cdot\text{s}^{-1}) with the independent variable (xx-axis substrate concentration, KmK_m). KmK_m is not a velocity; it is the specific substrate concentration required to elicit that half-maximal rate.

REASONING PATH
Your ACEpath teacher’s suggested approach
Distinguish $K_m$ from $\frac{1}{2}V_{\max}$
  • On a Michaelis-Menten plot, 12Vmax⁡\frac{1}{2}V_{\max} has units of rate/velocity, whereas KmK_m has units of concentration ([S][S]).

  • Find 12Vmax⁡\frac{1}{2}V_{\max} on the yy-axis first, then project horizontally to the curve and down to the xx-axis to read [S]=Km[S] = K_m.

Solve for $K_m$ algebraically from kinetic points
  • For any known data pair ([S],v0)([S], v_0) and Vmax⁡V_{\max}, the relationship is v0=Vmax⁡[S]Km+[S]v_0 = \frac{V_{\max}[S]}{K_m + [S]}.

  • Substitute known values (v0=50.0v_0 = 50.0, [S]=8.00[S] = 8.00, Vmax⁡=58.8V_{\max} = 58.8) and rearrange: Km=[S](Vmax⁡−v0)v0K_m = \frac{[S](V_{\max} - v_0)}{v_0}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set up the Michaelis-Menten equation using Vmax⁡=58.8 μmol⋅(L cells)−1⋅s−1V_{\max} = 58.8\ \mu\text{mol}\cdot(\text{L cells})^{-1}\cdot\text{s}^{-1} and the data point [S]=8.00 mM[S] = 8.00\ \text{mM}, v0=50.0 μmol⋅(L cells)−1⋅s−1v_0 = 50.0\ \mu\text{mol}\cdot(\text{L cells})^{-1}\cdot\text{s}^{-1}: 50.0=58.8⋅8.00Km+8.0050.0 = \frac{58.8 \cdot 8.00}{K_m + 8.00}.

  2. Cross-multiply to isolate KmK_m: 50.0(Km+8.00)=470.4  ⟹  50.0Km+400.0=470.450.0(K_m + 8.00) = 470.4 \implies 50.0 K_m + 400.0 = 470.4.

  3. Solve for KmK_m: 50.0Km=70.4  ⟹  Km=70.450.0=1.408 mM≈1.41 mM50.0 K_m = 70.4 \implies K_m = \frac{70.4}{50.0} = 1.408\ \text{mM} \approx 1.41\ \text{mM}.

Final answer

Km=1.41 mMK_m = 1.41\ \text{mM}; the mechanism is facilitated diffusion.

NEXT STEPS
Final Takeaways from Your Teacher
  • Always verify physical units: KmK_m must have concentration units (such as mM\text{mM}), while velocity has rate units.

  • Practice calculating KmK_m algebraically by isolating Km=[S](Vmax⁡−v0)v0K_m = \frac{[S](V_{\max} - v_0)}{v_0} whenever a complete data point and Vmax⁡V_{\max} are provided.

OverviewACEpath Teacher's Diagnosis

02 The student mistakenly concludes the mechanism is secondary active transport because ATP depletion had no effect, overlooking that transport stops at concentration equilibrium rather than moving substrate against a gradient.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    v0=Vmax⁡⋅[S]Km+[S]  ⟹  33.3=58.8⋅2.00Km+2.00v_0 = \frac{V_{\max} \cdot [S]}{K_m + [S]} \implies 33.3 = \frac{58.8 \cdot 2.00}{K_m + 2.00}

  2. Step 2

    33.3⋅Km+66.6=117.6  ⟹  Km=1.53 mM33.3 \cdot K_m + 66.6 = 117.6 \implies K_m = 1.53\text{ mM}

  3. Step 3

    Simple diffusion is ruled out because uptake shows saturation kinetics plateauing at Vmax⁡V_{\max}.

  4. Step 4

    Primary active transport is ruled out because ATP depletion does not affect transport.

  5. Step 5

    Because it uses an electrochemical gradient instead of direct ATP hydrolysis, the mechanism is secondary active transport.

    Correct

    Because transport halts when [S]in=[S]out[S]_{\text{in}} = [S]_{\text{out}}, substrate moves only down its concentration gradient without accumulating uphill. Coupled with saturability and energy independence, the mechanism is facilitated diffusion via a carrier protein (uniporter).

    Secondary active transport couples uphill movement against a chemical gradient ([S]in≠[S]out[S]_{\text{in}} \neq [S]_{\text{out}}) to an ion gradient. Because this transport halts at equilibrium ([S]in=[S]out[S]_{\text{in}} = [S]_{\text{out}}), substrate movement is strictly downhill (passive), meaning the carrier is a facilitated diffusion uniporter.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly selected and rearranged the Michaelis-Menten equation to determine KmK_m.

You recognized that saturation kinetics (Vmax⁡V_{\max}) rule out simple diffusion.

You recognized that insensitivity to ATP depletion rules out primary active transport.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Equilibrium condition overlooked in transport classification

none

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated ATP independence as evidence for secondary active transport without checking whether transport occurs against a gradient or stops at concentration equilibrium.

REASONING PATH
Your ACEpath teacher’s suggested approach
Downhill vs. Uphill Net Transport
  • Active transport (both primary and secondary) drives solute uphill against a concentration gradient to reach [S]in≠[S]out[S]_{\text{in}} \neq [S]_{\text{out}}. Facilitated diffusion is passive and ceases at chemical equilibrium ([S]in=[S]out[S]_{\text{in}} = [S]_{\text{out}}).

  • Always check the equilibrium state: if net transport stops when [S]in=[S]out[S]_{\text{in}} = [S]_{\text{out}}, the process is strictly passive (facilitated diffusion).

Evidence Profile for Secondary Active Transport
  • Secondary active transport is ATP-independent in the short term but strictly requires an ion cotransport partner (e.g., Na+\text{Na}^+ or H+\text{H}^+ gradient) and concentrates solute against its gradient.

  • Do not invoke secondary active transport unless there is evidence of an ion coupling partner and accumulation against a concentration gradient.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Evaluate the final condition from the problem prompt: 'transport ceases when extracellular concentration equals intracellular concentration.'

  2. Deduce that because [S][S] reaches equilibrium without accumulating against a concentration gradient ([S]in=[S]out[S]_{\text{in}} = [S]_{\text{out}}), net flux is purely downhill and thermodynamically passive.

  3. Combine carrier saturability (Step 3) with downhill passive thermodynamics (no ATP requirement and stops at [S]in=[S]out[S]_{\text{in}} = [S]_{\text{out}}) to deduce the transport mechanism.

Final answer

The transport mechanism is facilitated diffusion via a carrier protein (such as a GLUT uniporter).

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the defining diagnostic criteria for membrane transport: saturability distinguishes carrier-mediated from simple diffusion; equilibrium state ([S]in=[S]out[S]_{\text{in}} = [S]_{\text{out}} vs. uphill accumulation) distinguishes passive facilitated diffusion from active transport.

  • Practice classifying uncharacterized transport pathways using multi-factorial experimental data (inhibitors, ion dependence, and equilibrium concentrations).

OverviewACEpath Teacher's Diagnosis

03 The student calculates K_m using an inverted velocity ratio in the Michaelis-Menten rearrangement, resulting in a negative or nonsensical value that they adjust without fixing the formula.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Km=[S]∗(v0Vmax⁡−1)  ⟹  Km=2.00∗(33.358.8−1)  ⟹  Km=2.00∗(0.566−1)=−0.868 mMK_m = [S] * \left(\frac{v_0}{V_{\max}} - 1\right) \implies K_m = 2.00 * \left(\frac{33.3}{58.8} - 1\right) \implies K_m = 2.00 * (0.566 - 1) = -0.868\text{ mM}

    Correct

    v0=Vmax⁡[S]Km+[S]  ⟹  Km=[S](Vmax⁡v0−1)=2.00(58.833.3−1)≈1.53 mMv_0 = \frac{V_{\max}[S]}{K_m + [S]} \implies K_m = [S]\left(\frac{V_{\max}}{v_0} - 1\right) = 2.00\left(\frac{58.8}{33.3} - 1\right) \approx 1.53\text{ mM} (or using [S]=8.00 mM[S] = 8.00\text{ mM}, Km=8.00(58.850.0−1)≈1.41 mMK_m = 8.00\left(\frac{58.8}{50.0} - 1\right) \approx 1.41\text{ mM})

    You inverted the velocity fraction when rearranging the Michaelis-Menten equation. Starting from v0=Vmax⁡[S]Km+[S]v_0 = \frac{V_{\max}[S]}{K_m + [S]}, dividing both sides by v0v_0 and multiplying by (Km+[S])(K_m + [S]) gives Km+[S]=[S]Vmax⁡v0K_m + [S] = [S]\frac{V_{\max}}{v_0}, which rearranges to Km=[S](Vmax⁡v0−1)K_m = [S]\left(\frac{V_{\max}}{v_0} - 1\right). Because v0<Vmax⁡v_0 < V_{\max}, your expression (v0Vmax⁡−1)\left(\frac{v_0}{V_{\max}} - 1\right) produced a negative value, whereas the Michaelis constant must be strictly positive.

  2. Step 2

    Simple diffusion is ruled out because transport plateaus at Vmax⁡V_{\max}.

  3. Step 3

    Primary active transport is ruled out because azide and ATP depletion have no effect and transport ceases at equilibrium.

  4. Step 4

    The transporter operates by facilitated diffusion.

WHAT YOU DID WELL
Compliments from Your Teacher

You accurately identified that a saturable Vmax⁡V_{\max} rules out simple passive diffusion.

You correctly used the ATP-depletion data and equilibrium condition to eliminate primary active transport.

You correctly identified the physiological transport mechanism as facilitated diffusion.

You chose valid paired kinetic values from the experimental data table to isolate KmK_m.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Michaelis-Menten algebraic rearrangement error

You accidentally inverted the ratio of velocities as v0Vmax⁡\frac{v_0}{V_{\max}} instead of Vmax⁡v0\frac{V_{\max}}{v_0} when solving for KmK_m.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Inverting the numerator and denominator during fraction isolation led to subtracting 11 from a proper fraction (<1< 1), yielding a physically nonsensical negative concentration.

REASONING PATH
Your ACEpath teacher’s suggested approach
Physical Reality Check for Constants
  • Equilibrium, binding, and Michaelis constants (KmK_m, KdK_d, KaK_a) represent real physical solute concentrations and must always be positive (Km>0K_m > 0).

  • Whenever an isolated constant evaluates to a negative number, stop and re-derive the symbolic rearrangement before continuing.

Stepwise Algebraic Inversion
  • To solve ax+b=c\frac{a}{x + b} = c, invert both sides first: x+ba=1c  ⟹  x+b=ac  ⟹  x=a(1c)−b\frac{x + b}{a} = \frac{1}{c} \implies x + b = \frac{a}{c} \implies x = a\left(\frac{1}{c}\right) - b.

  • Write out the cross-multiplication or reciprocal step explicitly rather than trying to jump directly to the rearranged single-line formula.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Start with the Michaelis-Menten relation: v0=Vmax⁡[S]Km+[S]v_0 = \frac{V_{\max}[S]}{K_m + [S]}.

  2. Divide both sides by Vmax⁡[S]V_{\max}[S] and invert: Km+[S]Vmax⁡[S]=1v0\frac{K_m + [S]}{V_{\max}[S]} = \frac{1}{v_0}.

  3. Multiply by Vmax⁡V_{\max}: Km+[S][S]=Vmax⁡v0  ⟹  Km[S]+1=Vmax⁡v0\frac{K_m + [S]}{[S]} = \frac{V_{\max}}{v_0} \implies \frac{K_m}{[S]} + 1 = \frac{V_{\max}}{v_0}.

  4. Isolate KmK_m: Km=[S](Vmax⁡v0−1)K_m = [S]\left(\frac{V_{\max}}{v_0} - 1\right).

  5. Substitute [S]=8.00 mM[S] = 8.00\text{ mM}, v0=50.0 μmol⋅(L cells)−1⋅s−1v_0 = 50.0\ \mu\text{mol}\cdot(\text{L cells})^{-1}\cdot\text{s}^{-1}, and Vmax⁡=58.8 μmol⋅(L cells)−1⋅s−1V_{\max} = 58.8\ \mu\text{mol}\cdot(\text{L cells})^{-1}\cdot\text{s}^{-1}:

  6. Km=8.00(58.850.0−1)=8.00(1.176−1)=8.00(0.176)=1.408 mM≈1.41 mMK_m = 8.00\left(\frac{58.8}{50.0} - 1\right) = 8.00(1.176 - 1) = 8.00(0.176) = 1.408\text{ mM} \approx 1.41\text{ mM}.

Final answer
  1. Km=1.41 mMK_m = 1.41\text{ mM} (to three significant figures). 2. The transport mechanism is facilitated diffusion via a specific carrier protein (uniporter).
NEXT STEPS
Final Takeaways from Your Teacher
  • Practice isolating variables from the denominator of rational expressions using cross-multiplication.

  • Always verify that kinetic parameters (KmK_m, Vmax⁡V_{\max}) carry positive values and appropriate concentration units.

Lock it in

Similar question

01

A renal glucose transporter displays a maximal rate Vmax⁡=120 μmol⋅min−1V_{\max} = 120\ \mu\text{mol}\cdot\text{min}^{-1}. At an extracellular glucose concentration of [S]=3.0 mM[S] = 3.0\ \text{mM}, the initial transport rate is v0=60 μmol⋅min−1v_0 = 60\ \mu\text{mol}\cdot\text{min}^{-1}. State the value of KmK_m and explain how you determined it.

Answer

Km=3.0 mMK_m = 3.0\ \text{mM}. Because v0=60 μmol⋅min−1=12Vmax⁡v_0 = 60\ \mu\text{mol}\cdot\text{min}^{-1} = \frac{1}{2}V_{\max}, the substrate concentration at this rate is directly equal to KmK_m by definition.

02

An amino acid uniporter has Vmax⁡=40.0 μmol⋅(mg protein)−1⋅min−1V_{\max} = 40.0\ \mu\text{mol}\cdot(\text{mg protein})^{-1}\cdot\text{min}^{-1}. When [S]=6.00 mM[S] = 6.00\ \text{mM}, the measured uptake rate is v0=30.0 μmol⋅(mg protein)−1⋅min−1v_0 = 30.0\ \mu\text{mol}\cdot(\text{mg protein})^{-1}\cdot\text{min}^{-1}. Calculate KmK_m to three significant figures.

Answer

Km=2.00 mMK_m = 2.00\ \text{mM}. Using v0=Vmax⁡[S]Km+[S]v_0 = \frac{V_{\max}[S]}{K_m + [S]}, rearrange to Km=[S](Vmax⁡−v0)v0=6.00(40.0−30.0)30.0=60.030.0=2.00 mMK_m = \frac{[S](V_{\max} - v_0)}{v_0} = \frac{6.00(40.0 - 30.0)}{30.0} = \frac{60.0}{30.0} = 2.00\ \text{mM}.

03

Two hexose transporters, Transporter A (Km=1.5 mMK_m = 1.5\ \text{mM}, Vmax⁡=50 unitsV_{\max} = 50\ \text{units}) and Transporter B (Km=15.0 mMK_m = 15.0\ \text{mM}, Vmax⁡=50 unitsV_{\max} = 50\ \text{units}), operate in distinct tissues. At normal blood sugar (5.0 mM5.0\ \text{mM}), which transporter functions closer to its maximal capacity, and what is its uptake velocity?

Answer

Transporter A operates closer to capacity. For Transporter A: v0=50⋅5.01.5+5.0=2506.5≈38.5 unitsv_0 = \frac{50 \cdot 5.0}{1.5 + 5.0} = \frac{250}{6.5} \approx 38.5\ \text{units} (77% Vmax⁡77\%\ V_{\max}). For Transporter B: v0=50⋅5.015.0+5.0=12.5 unitsv_0 = \frac{50 \cdot 5.0}{15.0 + 5.0} = 12.5\ \text{units} (25% Vmax⁡25\%\ V_{\max}). Transporter A has higher substrate affinity (lower KmK_m).

Loading workspace…