Resources

During steady-state photosynthesis, an aquatic plant suspension synthesizes glyceraldehyde-3-phosphate (G3P) via the Calvin cycle. The net synthesis of 1.00 mol1.00\text{ mol} of triose phosphate (G3P) exported to the cytosol requires 9.00 mol9.00\text{ mol} of ATP\text{ATP} and 6.00 mol6.00\text{ mol} of NADPH\text{NADPH} in the stroma. The standard free energy of hydrolysis of ATP\text{ATP} under physiological chloroplast conditions is ΔG′=−50.5 kJ/mol\Delta G' = -50.5\text{ kJ/mol}, and the oxidation of NADPH\text{NADPH} by 1,31,3-bisphosphoglycerate contributes an effective free energy equivalent of ΔG′=−220.0 kJ/mol\Delta G' = -220.0\text{ kJ/mol}. Calculate the total chemical energy input (EinputE_{\text{input}} in kJ\text{kJ}) supplied by high-energy cofactors to drive the synthesis of 1.00 mol1.00\text{ mol} of exported G3P.

Answer and steps

Final answer

Einput=1.77×103 kJE_{\text{input}} = 1.77 \times 10^3\text{ kJ} (or 1774.5 kJ1774.5\text{ kJ} from 9.00 mol×50.5 kJ/mol+6.00 mol×220.0 kJ/mol9.00\text{ mol} \times 50.5\text{ kJ/mol} + 6.00\text{ mol} \times 220.0\text{ kJ/mol}).

Steps

01

Identify the stoichiometric requirements for G3P synthesis

In the stroma of the chloroplast, the Calvin–Benson cycle fixes carbon dioxide (COX2\ce{CO2}) into organic triose phosphates. For the net synthesis and export of 1.00 mol1.00\text{ mol} of glyceraldehyde-3-phosphate (G3P\text{G3P}, a 3-carbon sugar), the cycle requires:

  • nATP=9.00 moln_{\text{ATP}} = 9.00\text{ mol} of ATP\text{ATP} (used in phosphorylation of 3-phosphoglycerate and regeneration of ribulose-1,5-bisphosphate)
  • nNADPH=6.00 moln_{\text{NADPH}} = 6.00\text{ mol} of NADPH\text{NADPH} (used as the reducing agent to reduce 1,3-bisphosphoglycerate to G3P\text{G3P})

02

Determine the energy supplied by each cofactor

Chemical energy input refers to the magnitude of free energy released by exergonic reactions (ATP\text{ATP} hydrolysis and NADPH\text{NADPH} oxidation) coupled to drive the endergonic synthesis of triose phosphate.

  1. Energy supplied by ATP\text{ATP} hydrolysis: ΔGATP′=50.5 kJ/mol\Delta G'_{\text{ATP}} = 50.5\text{ kJ/mol} EATP=nATP⋅∣ΔGATP′∣=9.00 mol⋅50.5 kJ/mol=454.5 kJE_{\text{ATP}} = n_{\text{ATP}} \cdot |\Delta G'_{\text{ATP}}| = 9.00\text{ mol} \cdot 50.5\text{ kJ/mol} = 454.5\text{ kJ}
  2. Energy supplied by NADPH\text{NADPH} oxidation: ΔGNADPH′=220.0 kJ/mol\Delta G'_{\text{NADPH}} = 220.0\text{ kJ/mol} ENADPH=nNADPH⋅∣ΔGNADPH′∣=6.00 mol⋅220.0 kJ/mol=1320.0 kJE_{\text{NADPH}} = n_{\text{NADPH}} \cdot |\Delta G'_{\text{NADPH}}| = 6.00\text{ mol} \cdot 220.0\text{ kJ/mol} = 1320.0\text{ kJ}

03

Calculate the total energy input

Sum the contributions of both cofactors: Einput=EATP+ENADPHE_{\text{input}} = E_{\text{ATP}} + E_{\text{NADPH}} Einput=454.5 kJ+1320.0 kJ=1774.5 kJE_{\text{input}} = 454.5\text{ kJ} + 1320.0\text{ kJ} = 1774.5\text{ kJ}

Expressed to three significant figures, matching the input data: Einput=1.77×103 kJE_{\text{input}} = 1.77 \times 10^3\text{ kJ}

Common Pitfall: When asked for energy "supplied" or "input," report the positive magnitude of energy made available by the cofactors. Although free energy changes for spontaneous driving reactions are thermodynamically negative (ΔG<0\Delta G < 0), the quantity of energy delivered into the system is positive.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student misidentifies the stoichiometry of the Calvin cycle by using the requirements for synthesizing one mole of glucose (18 ATP and 12 NADPH) instead of one mole of net exported triose phosphate G3P.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    E(ATP)=18.00 mol×50.5 kJ/mol=909.0 kJE(\text{ATP}) = 18.00\text{ mol} \times 50.5\text{ kJ/mol} = 909.0\text{ kJ}

    Correct

    E(ATP)=9.00 mol×50.5 kJ/mol=454.5 kJE(\text{ATP}) = 9.00\text{ mol} \times 50.5\text{ kJ/mol} = 454.5\text{ kJ}

    You used 18.00 mol18.00\text{ mol} of ATP\text{ATP} instead of the 9.00 mol9.00\text{ mol} required for the net synthesis of 1.00 mol1.00\text{ mol} of exported G3P\text{G3P}.

  2. Step 2

    E(NADPH)=12.00 mol×220.0 kJ/mol=2640.0 kJE(\text{NADPH}) = 12.00\text{ mol} \times 220.0\text{ kJ/mol} = 2640.0\text{ kJ}

    Correct

    E(NADPH)=6.00 mol×220.0 kJ/mol=1320.0 kJE(\text{NADPH}) = 6.00\text{ mol} \times 220.0\text{ kJ/mol} = 1320.0\text{ kJ}

    You used 12.00 mol12.00\text{ mol} of NADPH\text{NADPH} instead of the 6.00 mol6.00\text{ mol} required for 1.00 mol1.00\text{ mol} of exported G3P\text{G3P}.

  3. Step 3

    Einput=909.0 kJ+2640.0 kJ=3549.0 kJE_{\text{input}} = 909.0\text{ kJ} + 2640.0\text{ kJ} = 3549.0\text{ kJ}

    Correct

    Einput=454.5 kJ+1320.0 kJ=1774.5 kJE_{\text{input}} = 454.5\text{ kJ} + 1320.0\text{ kJ} = 1774.5\text{ kJ}

    You correctly summed the two energy values, but the total is double the expected value because of the cofactor quantities used in the previous steps.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recognized that total chemical energy input is found by multiplying each cofactor's quantity by its energetic magnitude and summing the results.

You carried out all arithmetic products and the final addition accurately.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Stoichiometric mismatch between triose phosphate and hexose

You doubled the moles of ATP and NADPH given in the problem statement.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You recalled or substituted the overall Calvin cycle requirement for producing one mole of hexose (glucose, 6 C6\text{ C}), which requires 18 ATP18\text{ ATP} and 12 NADPH12\text{ NADPH}, rather than the requirement for exporting one mole of triose phosphate (G3P\text{G3P}, 3 C3\text{ C}), which requires 9 ATP9\text{ ATP} and 6 NADPH6\text{ NADPH}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Match target molecule carbon count
  • Net synthesis of 1 G3P1\text{ G3P} (3 C3\text{ C}) requires fixing 3COX23\ce{CO2} with 9 ATP9\text{ ATP} and 6 NADPH6\text{ NADPH}. Synthesis of 1 glucose1\text{ glucose} (6 C6\text{ C}) requires fixing 6COX26\ce{CO2} with 18 ATP18\text{ ATP} and 12 NADPH12\text{ NADPH}.

  • Check whether the question asks for triose phosphate (G3P\text{G3P}) or hexose (glucose) before selecting stoichiometric coefficients.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Use the stoichiometric values specified in the problem: nATP=9.00 moln_{\text{ATP}} = 9.00\text{ mol} and nNADPH=6.00 moln_{\text{NADPH}} = 6.00\text{ mol}.

  2. Calculate ATP energy: E(ATP)=9.00 mol×50.5 kJ/mol=454.5 kJE(\text{ATP}) = 9.00\text{ mol} \times 50.5\text{ kJ/mol} = 454.5\text{ kJ}.

  3. Calculate NADPH energy: E(NADPH)=6.00 mol×220.0 kJ/mol=1320.0 kJE(\text{NADPH}) = 6.00\text{ mol} \times 220.0\text{ kJ/mol} = 1320.0\text{ kJ}.

  4. Sum the energies: Einput=454.5 kJ+1320.0 kJ=1774.5 kJ≈1.77×103 kJE_{\text{input}} = 454.5\text{ kJ} + 1320.0\text{ kJ} = 1774.5\text{ kJ} \approx 1.77 \times 10^3\text{ kJ}.

Final answer

1.77×103 kJ1.77 \times 10^3\text{ kJ} (or 1774.5 kJ1774.5\text{ kJ})

NEXT STEPS
Final Takeaways from Your Teacher
  • Re-read the question carefully to confirm whether the given values represent a 3-carbon sugar (G3P) or a 6-carbon sugar (glucose).

  • Practice identifying the difference between the standard whole-cycle equation for glucose and the net export equation for triose phosphate.

OverviewACEpath Teacher's Diagnosis

02 The student confuses the stoichiometric amounts of ATP and NADPH, multiplying ATP by 6.00 mol and NADPH by 9.00 mol.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    E(ATP)=6.00 mol×50.5 kJ/mol=303.0 kJE(\text{ATP}) = 6.00\text{ mol} \times 50.5\text{ kJ/mol} = 303.0\text{ kJ}

    Correct

    E(ATP)=9.00 mol×50.5 kJ/mol=454.5 kJE(\text{ATP}) = 9.00\text{ mol} \times 50.5\text{ kJ/mol} = 454.5\text{ kJ}

    You multiplied the free energy of ATP\text{ATP} hydrolysis by 6.00 mol6.00\text{ mol} instead of the required 9.00 mol9.00\text{ mol} of ATP\text{ATP}.

  2. Step 2

    E(NADPH)=9.00 mol×220.0 kJ/mol=1980.0 kJE(\text{NADPH}) = 9.00\text{ mol} \times 220.0\text{ kJ/mol} = 1980.0\text{ kJ}

    Correct

    E(NADPH)=6.00 mol×220.0 kJ/mol=1320.0 kJE(\text{NADPH}) = 6.00\text{ mol} \times 220.0\text{ kJ/mol} = 1320.0\text{ kJ}

    You multiplied the free energy of NADPH\text{NADPH} oxidation by 9.00 mol9.00\text{ mol} instead of the required 6.00 mol6.00\text{ mol} of NADPH\text{NADPH}.

  3. Step 3

    Einput=303.0 kJ+1980.0 kJ=2283.0 kJE_{\text{input}} = 303.0\text{ kJ} + 1980.0\text{ kJ} = 2283.0\text{ kJ}

    Correct

    Einput=454.5 kJ+1320.0 kJ=1774.5 kJ≈1.77×103 kJE_{\text{input}} = 454.5\text{ kJ} + 1320.0\text{ kJ} = 1774.5\text{ kJ} \approx 1.77 \times 10^3\text{ kJ}

    You correctly added the two cofactor energy values, but the total is affected by the swapped quantities in the earlier steps.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recognized that total energy input is the sum of the free energy contributions from ATP\text{ATP} and NADPH\text{NADPH}.

You accurately performed the multiplication and addition calculations for the numbers you wrote.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Stoichiometric coefficient swap

You swapped the amounts of ATP\text{ATP} (9.00 mol9.00\text{ mol}) and NADPH\text{NADPH} (6.00 mol6.00\text{ mol}) when substituting them into your formulas.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Conflating cofactor requirements in the Calvin cycle: 3 carbon dioxide fixations require 6 mol6\text{ mol} of ATP\text{ATP} and 6 mol6\text{ mol} of NADPH\text{NADPH} for the reduction of 3-PGA to G3P, plus an extra 3 mol3\text{ mol} of ATP\text{ATP} for RuBP regeneration, totaling 9 mol9\text{ mol} of ATP\text{ATP} and 6 mol6\text{ mol} of NADPH\text{NADPH} (a 3:2 ratio).

REASONING PATH
Your ACEpath teacher’s suggested approach
Verify Cofactor Ratio in the Calvin Cycle
  • Net synthesis of 1 mol1\text{ mol} of triose phosphate requires fixing 3 mol3\text{ mol} of COX2\ce{CO2}, which uses 9 mol9\text{ mol} of ATP\text{ATP} (66 in reduction, 33 in regeneration) and 6 mol6\text{ mol} of NADPH\text{NADPH} (66 in reduction).

  • Always pair 9 mol9\text{ mol} with ATP\text{ATP} and 6 mol6\text{ mol} with NADPH\text{NADPH} before multiplying by their molar free energy values.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. E(ATP)=9.00 mol×50.5 kJ/mol=454.5 kJE(\text{ATP}) = 9.00\text{ mol} \times 50.5\text{ kJ/mol} = 454.5\text{ kJ}

  2. E(NADPH)=6.00 mol×220.0 kJ/mol=1320.0 kJE(\text{NADPH}) = 6.00\text{ mol} \times 220.0\text{ kJ/mol} = 1320.0\text{ kJ}

  3. Einput=454.5 kJ+1320.0 kJ=1774.5 kJE_{\text{input}} = 454.5\text{ kJ} + 1320.0\text{ kJ} = 1774.5\text{ kJ}

Final answer

Einput=1.77×103 kJE_{\text{input}} = 1.77 \times 10^3\text{ kJ}

NEXT STEPS
Final Takeaways from Your Teacher
  • Double-check problem statements by matching each given numerical quantity with its specific chemical species before calculating.

  • Review the two distinct phases of the Calvin cycle that consume ATP\text{ATP} versus the single phase that consumes NADPH\text{NADPH} to reinforce why ATP\text{ATP} is required in higher quantity.

OverviewACEpath Teacher's Diagnosis

03 The student considers only ATP as the high-energy cofactor contributing chemical energy, omitting the energy provided by NADPH.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Einput=E(ATP)=9.00 mol×50.5 kJ/mol  ⟹  454.5 kJE_{\text{input}} = E(\text{ATP}) = 9.00\text{ mol} \times 50.5\text{ kJ/mol} \implies 454.5\text{ kJ}

    Correct

    Einput=E(ATP)+E(NADPH)=(9.00 mol×50.5 kJ/mol)+(6.00 mol×220.0 kJ/mol)=1774.5 kJE_{\text{input}} = E(\text{ATP}) + E(\text{NADPH}) = (9.00\text{ mol} \times 50.5\text{ kJ/mol}) + (6.00\text{ mol} \times 220.0\text{ kJ/mol}) = 1774.5\text{ kJ}

    You calculated only the energy provided by ATP\text{ATP} (454.5 kJ454.5\text{ kJ}). The synthesis of 1.00 mol1.00\text{ mol} of G3P\text{G3P} also requires 6.00 mol6.00\text{ mol} of NADPH\text{NADPH}, which contributes an additional 1320.0 kJ1320.0\text{ kJ} of chemical energy.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the molar quantity and unit free energy for ATP hydrolysis.

You accurately multiplied the moles of ATP by its free energy equivalent to obtain 454.5 kJ454.5\text{ kJ}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omission of NADPH energy contribution

You equated the total chemical energy input solely to the energy from ATP, leaving out the energy supplied by NADPH.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated ATP as the only energetic cofactor in the pathway, overlooking that the reducing power stored in NADPH also delivers free energy coupled to endergonic reductions in the Calvin cycle.

REASONING PATH
Your ACEpath teacher’s suggested approach
Account for All Cofactor Energy Inputs
  • In biosynthetic pathways like the Calvin cycle, both ATP hydrolysis and NADPH oxidation supply free energy to drive endergonic carbon-fixation reactions.

  • Always inventory both high-energy phosphate donors (ATP) and reducing equivalents (NADPH/NADH) before summing the total energy input.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Calculate the energy delivered by NADPH oxidation: E(NADPH)=6.00 mol×220.0 kJ/mol=1320.0 kJE(\text{NADPH}) = 6.00\text{ mol} \times 220.0\text{ kJ/mol} = 1320.0\text{ kJ}.

  2. Add the two cofactor contributions together: Einput=E(ATP)+E(NADPH)=454.5 kJ+1320.0 kJ=1774.5 kJE_{\text{input}} = E(\text{ATP}) + E(\text{NADPH}) = 454.5\text{ kJ} + 1320.0\text{ kJ} = 1774.5\text{ kJ}.

Final answer

Einput=1.77×103 kJE_{\text{input}} = 1.77 \times 10^3\text{ kJ} (or 1774.5 kJ1774.5\text{ kJ})

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the dual roles of ATP (group transfer potential) and NADPH (redox potential) as high-energy cofactors in cellular metabolism.

  • Check all given quantities in stoichiometric metabolic problems to confirm every cofactor is included in your energy balance.

Lock it in

Similar question

01

A cell suspension fixes enough carbon to export 0.500 mol0.500\text{ mol} of glyceraldehyde-3-phosphate (G3P). Using the same thermodynamic values (ΔG′=−50.5 kJ/mol\Delta G' = -50.5\text{ kJ/mol} for ATP and −220.0 kJ/mol-220.0\text{ kJ/mol} for NADPH), calculate the total chemical energy input in kilojoules.

Answer

Einput=887 kJE_{\text{input}} = 887\text{ kJ} (or 887.25 kJ887.25\text{ kJ}). For 0.500 mol0.500\text{ mol} G3P, required cofactors are 4.50 mol ATP4.50\text{ mol ATP} and 3.00 mol NADPH3.00\text{ mol NADPH}. Einput=(4.50 mol×50.5 kJ/mol)+(3.00 mol×220.0 kJ/mol)=227.25 kJ+660.0 kJ=887.25 kJE_{\text{input}} = (4.50\text{ mol} \times 50.5\text{ kJ/mol}) + (3.00\text{ mol} \times 220.0\text{ kJ/mol}) = 227.25\text{ kJ} + 660.0\text{ kJ} = 887.25\text{ kJ}.

02

Calculate the total cofactor energy input (EinputE_{\text{input}}) required to synthesize 1.00 mol1.00\text{ mol} of glucose directly from carbon dioxide in the stroma, using ΔG′=−50.5 kJ/mol\Delta G' = -50.5\text{ kJ/mol} for ATP and −220.0 kJ/mol-220.0\text{ kJ/mol} for NADPH.

Answer

Einput=3.55×103 kJE_{\text{input}} = 3.55 \times 10^3\text{ kJ} (or 3549.0 kJ3549.0\text{ kJ}). Synthesizing 1.00 mol1.00\text{ mol} of glucose (6 C6\text{ C}) requires 18.00 mol ATP18.00\text{ mol ATP} and 12.00 mol NADPH12.00\text{ mol NADPH}. Einput=(18.00 mol×50.5 kJ/mol)+(12.00 mol×220.0 kJ/mol)=909.0 kJ+2640.0 kJ=3549.0 kJE_{\text{input}} = (18.00\text{ mol} \times 50.5\text{ kJ/mol}) + (12.00\text{ mol} \times 220.0\text{ kJ/mol}) = 909.0\text{ kJ} + 2640.0\text{ kJ} = 3549.0\text{ kJ}.

03

Suppose an altered enzyme variant reduces the ATP requirement for RuBP regeneration such that only 8.00 mol8.00\text{ mol} of ATP (instead of 9.00 mol9.00\text{ mol}) are needed per 1.00 mol1.00\text{ mol} of net exported G3P, while NADPH demand remains at 6.00 mol6.00\text{ mol}. What is the new total cofactor energy input (EinputE_{\text{input}}), and what percentage of total input energy is provided by NADPH under these conditions?

Answer

Einput=1724 kJE_{\text{input}} = 1724\text{ kJ}; NADPH provides 76.6%76.6\%. Calculation: E(ATP)=8.00 mol×50.5 kJ/mol=404.0 kJE(\text{ATP}) = 8.00\text{ mol} \times 50.5\text{ kJ/mol} = 404.0\text{ kJ}. E(NADPH)=6.00 mol×220.0 kJ/mol=1320.0 kJE(\text{NADPH}) = 6.00\text{ mol} \times 220.0\text{ kJ/mol} = 1320.0\text{ kJ}. Einput=404.0 kJ+1320.0 kJ=1724.0 kJE_{\text{input}} = 404.0\text{ kJ} + 1320.0\text{ kJ} = 1724.0\text{ kJ}. NADPH percentage: (1320.0/1724.0)×100%≈76.6%(1320.0 / 1724.0) \times 100\% \approx 76.6\%.

Loading workspace…