Resources

A laboratory technician synthesizes a eukaryotic functional peptide with the carboxyl-terminal sequence ...-Val-Tyr-Lys-Ser-Stop\text{...-Val-Tyr-Lys-Ser-Stop}. Analysis confirms that the mature mRNA sequence encoding this terminal four-amino-acid segment (excluding the stop codon) contains 1212 nucleotides with the specific base composition 33.3% A33.3\%\text{ A}, 25.0% U25.0\%\text{ U}, 25.0% G25.0\%\text{ G}, and 16.7% C16.7\%\text{ C}. Given the standard codons Val∈{GUU,GUC,GUA,GUG}\text{Val} \in \{\text{GUU}, \text{GUC}, \text{GUA}, \text{GUG}\}, Tyr∈{UAU,UAC}\text{Tyr} \in \{\text{UAU}, \text{UAC}\}, Lys∈{AAA,AAG}\text{Lys} \in \{\text{AAA}, \text{AAG}\}, and Ser∈{UCU,UCC,UCA,UCG,AGU,AGC}\text{Ser} \in \{\text{UCU}, \text{UCC}, \text{UCA}, \text{UCG}, \text{AGU}, \text{AGC}\}, reverse-engineer the precise 3′3'-to-5′5' sequence of the template (non-coding) DNA strand that gave rise to this 1212-nucleotide mRNA segment.

Answer and steps

Final answer

Template DNA strand:3′-CAC ATA TTT TCG-5’\text{Template DNA strand}: 3'\text{-CAC ATA TTT TCG-5'} (corresponding to mRNA:5′-GUG UAU AAA AGC-3’\text{mRNA}: 5'\text{-GUG UAU AAA AGC-3'}).

Steps

01

Identify Codon Possibilities for the Peptide Sequence

The carboxyl-terminal peptide sequence (excluding the stop codon) is: Val−Tyr−Lys−Ser\text{Val} - \text{Tyr} - \text{Lys} - \text{Ser}

The standard mRNA codons for each amino acid are:

  • Valine (Val\text{Val}): 5′-GUU-3′5'\text{-GUU-}3', 5′-GUC-3′5'\text{-GUC-}3', 5′-GUA-3′5'\text{-GUA-}3', or 5′-GUG-3′5'\text{-GUG-}3' (fixed prefix: 5′-GU-5'\text{-GU-})
  • Tyrosine (Tyr\text{Tyr}): 5′-UAU-3′5'\text{-UAU-}3' or 5′-UAC-3′5'\text{-UAC-}3' (fixed prefix: 5′-UA-5'\text{-UA-})
  • Lysine (Lys\text{Lys}): 5′-AAA-3′5'\text{-AAA-}3' or 5′-AAG-3′5'\text{-AAG-}3' (fixed prefix: 5′-AA-5'\text{-AA-})
  • Serine (Ser\text{Ser}): 5′-UCU-3′5'\text{-UCU-}3', 5′-UCC-3′5'\text{-UCC-}3', 5′-UCA-3′5'\text{-UCA-}3', 5′-UCG-3′5'\text{-UCG-}3', 5′-AGU-3′5'\text{-AGU-}3', or 5′-AGC-3′5'\text{-AGC-}3'

02

Determine the Exact mRNA Codons Using Base Constraints

A 1212-nucleotide sequence with 25.0% G25.0\%\text{ G} and 25.0% U25.0\%\text{ U} contains exactly: Number of G bases=12×0.25=3\text{Number of G bases} = 12 \times 0.25 = 3 Number of U bases=12×0.25=3\text{Number of U bases} = 12 \times 0.25 = 3

We evaluate codon combinations that satisfy these target counts:

  1. Uracil (U\text{U}) allocation:

    • Val\text{Val} contributes at least 1 U1\text{ U} at position 2 (5′-GUN‾-3′5'\text{-GU}\underline{\phantom{\text{N}}}\text{-}3').
    • Tyr\text{Tyr} contributes at least 1 U1\text{ U} at position 1 (5′-N‾AN‾-3′5'\text{-}\underline{\phantom{\text{N}}}\text{A}\underline{\phantom{\text{N}}}\text{-}3'). If Tyr\text{Tyr} is UAU\text{UAU}, it contributes 2 U2\text{ U} bases.
    • Together, GUG\text{GUG} (with 1 U1\text{ U}) and UAU\text{UAU} (with 2 U2\text{ U}) account for all 3 U3\text{ U} bases (1+2=31 + 2 = 3). Consequently, no other codons can contain U\text{U}.
  2. Guanine (G\text{G}) and Serine (Ser\text{Ser}) allocation:

    • Val=GUG\text{Val} = \text{GUG} supplies 2 G2\text{ G} bases.
    • To achieve exactly 3 G3\text{ G} bases overall, the remaining codons must supply exactly 1 G1\text{ G}.
    • Since Lys\text{Lys} can be AAA\text{AAA} (supplying 0 G0\text{ G}) and Ser\text{Ser} can be selected from the AG(U/C)\text{AG(U/C)} family without adding extra uracils, choosing Ser=AGC\text{Ser} = \text{AGC} provides the required third G\text{G} and introduces C\text{C}.
    • Therefore, setting Lys=AAA\text{Lys} = \text{AAA} completes the sequence.

Putting these four codons together in the 5′→3′5' \to 3' direction: mRNA:5′-GUG-UAU-AAA-AGC-3′\text{mRNA}: 5'\text{-GUG-UAU-AAA-AGC-}3'


03

Transcribe to the Template (Non-Coding) DNA Strand

The template (antisense/non-coding) DNA strand is complementary and antiparallel to the mature mRNA:

  • The mRNA runs 5′→3′5' \to 3', so the template strand runs 3′→5′3' \to 5'.
  • Standard base-pairing rules between RNA and template DNA: A (in mRNA)⟷T (in DNA)\text{A (in mRNA)} \longleftrightarrow \text{T (in DNA)} U (in mRNA)⟷A (in DNA)\text{U (in mRNA)} \longleftrightarrow \text{A (in DNA)} G (in mRNA)⟷C (in DNA)\text{G (in mRNA)} \longleftrightarrow \text{C (in DNA)} C (in mRNA)⟷G (in DNA)\text{C (in mRNA)} \longleftrightarrow \text{G (in DNA)}

Complementing each codon from 5′5' to 3′3' yields:

  • mRNA 5′-GUG-3′⟶DNA 3′-CAC-5′5'\text{-GUG-}3' \longrightarrow \text{DNA } 3'\text{-CAC-}5'
  • mRNA 5′-UAU-3′⟶DNA 3′-ATA-5′5'\text{-UAU-}3' \longrightarrow \text{DNA } 3'\text{-ATA-}5'
  • mRNA 5′-AAA-3′⟶DNA 3′-TTT-5′5'\text{-AAA-}3' \longrightarrow \text{DNA } 3'\text{-TTT-}5'
  • mRNA 5′-AGC-3′⟶DNA 3′-TCG-5′5'\text{-AGC-}3' \longrightarrow \text{DNA } 3'\text{-TCG-}5'

Joining these triplets yields the template strand: Template DNA strand:3′-CAC ATA TTT TCG-5′\text{Template DNA strand}: 3'\text{-CAC ATA TTT TCG-}5'


Common Pitfall

  • Directionality and Strand Identity: Do not confuse the template (non-coding) strand with the coding (sense) strand. The coding strand has the same sequence as the mRNA (with T\text{T} in place of U\text{U}) oriented 5′→3′5' \to 3', whereas the template strand is complementary and antiparallel, running 3′→5′3' \to 5'.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student determines the coding (sense) strand or transcribes without reversing orientation, writing the template sequence 5' to 3' instead of 3' to 5'.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Base counts: 12×33.3%=4 A,  3 U,  12×25.0%=3 G,  12×16.7%=2 C\text{Base counts: } 12 \times 33.3\% = 4\text{ A},\; 3\text{ U},\; 12 \times 25.0\% = 3\text{ G},\; 12 \times 16.7\% = 2\text{ C}

  2. Step 2

    mRNA codons: Val=GUG,  Tyr=UAC,  Lys=AAA,  Ser=UCG  ⟹  5′-GUG-UAC-AAA-UCG-3′\text{mRNA codons: } \text{Val} = \text{GUG},\; \text{Tyr} = \text{UAC},\; \text{Lys} = \text{AAA},\; \text{Ser} = \text{UCG} \implies 5'\text{-GUG-UAC-AAA-UCG-}3'

  3. Step 3

    Complementary DNA sequence: 5′-CAC-ATG-TTT-AGC-3′\text{Complementary DNA sequence: } 5'\text{-CAC-ATG-TTT-AGC-}3'

    Correct

    3′-CAC-ATG-TTT-AGC-5′3'\text{-CAC-ATG-TTT-AGC-}5'

    While you correctly paired each RNA base with its complementary DNA base (G↔C\text{G}\leftrightarrow\text{C}, U→A\text{U}\to\text{A}, A→T\text{A}\to\text{T}, C→G\text{C}\to\text{G}), DNA and RNA strands are antiparallel. The template strand that aligns with 5′→3′5'\to 3' mRNA must run 3′→5′3'\to 5'.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the base counts from the percentage composition.

You accurately selected codons matching the target amino acids and base counts.

You correctly applied base-pairing rules between RNA bases and DNA deoxyribonucleotides.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Strand Directionality Reversal Error

You assigned 5′5' to the left end and 3′3' to the right end of the complementary strand instead of recognizing antiparallel polarity.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Conflating strand orientation by writing complementary strands in parallel (5′→3′5'\to 3') rather than antiparallel (3′→5′3'\to 5') relative to the mRNA transcript.

REASONING PATH
Your ACEpath teacher’s suggested approach
Antiparallel Strand Polarity
  • Nucleic acid duplexes are always antiparallel; a 5′→3′5'\to 3' RNA strand is complementary to a 3′→5′3'\to 5' template DNA strand.

  • Whenever you transcribe or reverse-transcribe, immediately write 3′3' opposite the RNA's 5′5' end and 5′5' opposite the RNA's 3′3' end before writing bases.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write down the mRNA sequence with its polarity: 5′-GUG-UAC-AAA-UCG-3′5'\text{-GUG-UAC-AAA-UCG-}3'.

  2. Align the complementary DNA template strand antiparallel to the mRNA: 3′3' opposite the 5′5' end, and 5′5' opposite the 3′3' end.

  3. Apply complementary base pairing: G↔C\text{G}\leftrightarrow\text{C}, U→A\text{U}\to\text{A}, A→T\text{A}\to\text{T}, C→G\text{C}\to\text{G}.

Final answer

3′-CAC-ATG-TTT-AGC-5′3'\text{-CAC-ATG-TTT-AGC-}5'

NEXT STEPS
Final Takeaways from Your Teacher
  • Always write out the strand direction labels (3′3' and 5′5') before filling in the complementary bases.

  • Double-check whether a question requests the template strand (3′→5′3'\to 5') or the coding strand (5′→3′5'\to 3').

OverviewACEpath Teacher's Diagnosis

02 The student misidentifies the template strand as identical to the mRNA sequence with uracil replaced by thymine, confusing the template strand with the coding strand.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Total nucleotides: 4 A,3 U,3 G,2 C\text{Total nucleotides: } 4\text{ A}, 3\text{ U}, 3\text{ G}, 2\text{ C}

  2. Step 2

    mRNA Sequence: 5′-GUG-UAC-AAA-UCG-3′\text{mRNA Sequence: } 5'\text{-GUG-UAC-AAA-UCG-}3'

  3. Step 3

    Substitute T for U to find the template Strand: 3′-GTG-TAC-AAA-TCG-5′\text{Substitute T for U to find the template Strand: } 3'\text{-GTG-TAC-AAA-TCG-}5'

    Correct

    Template strand: 3′-CAC-ATG-TTT-AGC-5′\text{Template strand: } 3'\text{-CAC-ATG-TTT-AGC-}5'

    You replaced U\text{U} with T\text{T}, which confuses the template (non-coding) strand with the coding (sense) strand. The template strand is antiparallel and complementary to mRNA, meaning A↔T\text{A} \leftrightarrow \text{T}, U↔A\text{U} \leftrightarrow \text{A}, G↔C\text{G} \leftrightarrow \text{C}, and C↔G\text{C} \leftrightarrow \text{G}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the exact count of each nucleotide from the given percentages.

You successfully identified a combination of codons that strictly satisfies the peptide sequence and base composition.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Template vs. Coding Strand Confusion

No, this is a conceptual misunderstanding regarding template strand transcription versus coding strand equivalence.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the template (non-coding) strand as identical in sequence to the mRNA (with T\text{T} in place of U\text{U}). In molecular biology, the mRNA sequence directly mirrors the coding (sense) strand (5′→3′5' \to 3' with U\text{U} replacing T\text{T}), while the template (non-coding/antisense) strand serves as the complementary, antiparallel physical pattern during RNA polymerase transcription (3′→5′3' \to 5').

REASONING PATH
Your ACEpath teacher’s suggested approach
Strand Identification
  • The mRNA transcript is complementary and antiparallel to the template strand (3′→5′3' \to 5'), and identical in sequence to the coding strand (5′→3′5' \to 3') except with U\text{U} in place of T\text{T}.

  • Always apply Watson-Crick base-pairing (A↔T,U↔A,C↔G,G↔C\text{A}\leftrightarrow\text{T}, \text{U}\leftrightarrow\text{A}, \text{C}\leftrightarrow\text{G}, \text{G}\leftrightarrow\text{C}) to find the template strand from mRNA.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set up the complementary, antiparallel strand running 3′3' to 5′5'.

  2. Base-pair each RNA nucleotide with its DNA template partner: G→C\text{G} \to \text{C}, U→A\text{U} \to \text{A}, A→T\text{A} \to \text{T}, C→G\text{C} \to \text{G}.

  3. Apply this triplet by triplet: 5′-GUG-3′→3′-CAC-5′5'\text{-GUG-}3' \to 3'\text{-CAC-}5', 5′-UAC-3′→3′-ATG-5′5'\text{-UAC-}3' \to 3'\text{-ATG-}5', 5′-AAA-3′→3′-TTT-5′5'\text{-AAA-}3' \to 3'\text{-TTT-}5', and 5′-UCG-3′→3′-AGC-5′5'\text{-UCG-}3' \to 3'\text{-AGC-}5'.

Final answer

Template DNA strand:3′-CAC ATG TTT AGC-5′\text{Template DNA strand}: 3'\text{-CAC ATG TTT AGC-}5'

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the distinct roles of the coding (sense) strand and template (antisense) strand during transcription.

  • Practice transcribing short mRNA fragments into both template and coding DNA strands, paying close attention to 5′5' and 3′3' polarity.

Lock it in

Similar question

01

A short mRNA fragment has the sequence 5′-AUG-GCA-UUC-3′5'\text{-AUG-GCA-UUC-}3'. Write the sequence of the template DNA strand in the 3′→5′3' \to 5' direction.

Answer

3′-TAC-CGT-AAG-5′3'\text{-TAC-CGT-AAG-}5'. Pair each base antiparallel: A↔T\text{A}\leftrightarrow\text{T}, U→A\text{U}\to\text{A}, G↔C\text{G}\leftrightarrow\text{C}, C↔G\text{C}\leftrightarrow\text{G}.

02

A peptide segment is Met-Trp\text{Met-Trp}. Standard codons are Met:5′-AUG-3′\text{Met}: 5'\text{-AUG-}3' and Trp:5′-UGG-3′\text{Trp}: 5'\text{-UGG-}3'. Write both the template strand (3′→5′3' \to 5') and the coding strand (5′→3′5' \to 3') for this segment.

Answer

Template strand: 3′-TAC-ACC-5′3'\text{-TAC-ACC-}5'. Coding strand: 5′-ATG-TGG-3′5'\text{-ATG-TGG-}3'. The template strand is antiparallel and complementary to mRNA; the coding strand is identical to mRNA with T\text{T} replacing U\text{U}.

03

A template DNA strand has the sequence 3′-TGA-CCT-GAA-5′3'\text{-TGA-CCT-GAA-}5'. Identify the resulting mRNA sequence (5′→3′5' \to 3') and the coding DNA strand sequence (5′→3′5' \to 3').

Answer

mRNA: 5′-ACU-GGA-CUU-3′5'\text{-ACU-GGA-CUU-}3'. Coding strand: 5′-ACT-GGA-CTT-3′5'\text{-ACT-GGA-CTT-}3'. Transcribe template 3′→5′3' \to 5' into mRNA 5′→3′5' \to 3' using RNA bases, then match coding DNA directly to mRNA substituting T\text{T} for U\text{U}.

Loading workspace…