Resources

In a mammalian physiology laboratory, researchers investigate the coordination between the autonomic nervous system and the urinary system during hemorrhagic hypovolemia. A lab subject experiences a controlled blood withdrawal that lowers renal arterial perfusion pressure. The animal's baseline renal blood flow (RBF) is 1200 mL/min1200\text{ mL/min} with a hematocrit of 45.0%45.0\%. To conserve core blood volume, sympathetic renal nerves stimulate juxtaglomerular granular cells to release renin, initiating the renin-angiotensin-aldosterone system (RAAS) and eliciting renal vasoconstriction that reduces renal plasma flow (RPF) by 30.0%30.0\%. (a) Calculate the baseline RPF in mL/min\text{mL/min}. (b) Calculate the post-vasoconstriction RPF in mL/min\text{mL/min}. (c) If the post-vasoconstriction glomerular filtration rate (GFR) stabilizes at 92.4 mL/min92.4\text{ mL/min} via angiotensin II-mediated efferent arteriolar constriction, calculate the resulting filtration fraction (FF=GFRRPFFF = \frac{GFR}{RPF}) expressed as a percentage.

Answer and steps

Final answer

(a) Baseline RPF=660 mL/min\text{RPF} = 660\text{ mL/min}; (b) Post-vasoconstriction RPF=462 mL/min\text{RPF} = 462\text{ mL/min}; (c) Filtration fraction FF=20.0%FF = 20.0\%

Steps

01

Calculate Baseline Renal Plasma Flow (RPF)

Renal blood flow (RBF\text{RBF}) represents the total volume of whole blood delivered to the kidneys per unit time. Hematocrit (Hct\text{Hct}) is the fraction of total blood volume occupied by red blood cells; the remaining fraction corresponds to blood plasma:

Plasma fraction=1−Hct\text{Plasma fraction} = 1 - \text{Hct}

Multiply the baseline RBF\text{RBF} by the plasma fraction to obtain the baseline renal plasma flow:

RPFbaseline=RBF⋅(1−Hct)\text{RPF}_{\text{baseline}} = \text{RBF} \cdot (1 - \text{Hct})

RPFbaseline=1200 mL/min⋅(1−0.450)=1200 mL/min⋅0.550=660 mL/min\text{RPF}_{\text{baseline}} = 1200\text{ mL/min} \cdot (1 - 0.450) = 1200\text{ mL/min} \cdot 0.550 = 660\text{ mL/min}


02

Calculate Post-Vasoconstriction RPF

During hemorrhagic hypovolemia, sympathetic activation and circulating angiotensin II induce renal vasoconstriction, reducing renal plasma flow by 30.0%30.0\%. The remaining flow fraction is:

1−0.300=0.700 (or 70.0%)1 - 0.300 = 0.700\text{ (or } 70.0\%)

Multiply the baseline RPF\text{RPF} by the remaining fraction:

RPFpost=RPFbaseline⋅(1−0.300)\text{RPF}_{\text{post}} = \text{RPF}_{\text{baseline}} \cdot (1 - 0.300)

RPFpost=660 mL/min⋅0.700=462 mL/min\text{RPF}_{\text{post}} = 660\text{ mL/min} \cdot 0.700 = 462\text{ mL/min}


03

Calculate the Filtration Fraction (FF\text{FF})

The filtration fraction is the proportion of plasma entering the glomeruli that is filtered into Bowman's capsule:

FF=GFRRPF\text{FF} = \frac{\text{GFR}}{\text{RPF}}

Common Pitfall: When evaluating renal function during an altered state, calculate FF\text{FF} using the post-vasoconstriction RPF\text{RPF} rather than the baseline RPF\text{RPF}, because both the glomerular filtration rate (GFR\text{GFR}) and RPF\text{RPF} must reflect the same physiological condition.

Substitute the given stabilized GFR\text{GFR} (92.4 mL/min92.4\text{ mL/min}) and the calculated RPFpost\text{RPF}_{\text{post}} (462 mL/min462\text{ mL/min}):

FF=92.4 mL/min462 mL/min=0.200=20.0%\text{FF} = \frac{92.4\text{ mL/min}}{462\text{ mL/min}} = 0.200 = 20.0\%

Physiologically, preferential constriction of the efferent arteriole by angiotensin II maintains glomerular capillary hydrostatic pressure, allowing the kidney to preserve adequate filtration fraction and waste excretion despite a substantial drop in overall renal plasma flow.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student multiplies RBF directly by the hematocrit fraction rather than the plasma fraction (1 - Hct) to find RPF.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    RPF=RBF×Hct  ⟹  RPF=1200×0.45=540 mL/min\text{RPF} = \text{RBF} \times \text{Hct} \implies \text{RPF} = 1200 \times 0.45 = 540\text{ mL/min}

    Correct

    RPFbaseline=RBF×(1−Hct)=1200×(1−0.450)=660 mL/min\text{RPF}_{\text{baseline}} = \text{RBF} \times (1 - \text{Hct}) = 1200 \times (1 - 0.450) = 660\text{ mL/min}

    Hematocrit represents the fraction of whole blood volume occupied by red blood cells, whereas plasma accounts for the remaining volume. You need to multiply by (1−Hct)=0.550(1 - \text{Hct}) = 0.550 to calculate renal plasma flow.

  2. Step 2

    Post-vasoconstriction RPF\text{Post-vasoconstriction RPF} = 540 ×\times (1 - 0.30)   ⟹  \implies Post-vasoconstriction RPF\text{Post-vasoconstriction RPF} = 540 ×\times 0.70 = 378 mL/min\text{ mL/min}

    Correct

    RPFpost=660×(1−0.300)=462 mL/min\text{RPF}_{\text{post}} = 660 \times (1 - 0.300) = 462\text{ mL/min}

    Your method of multiplying by (1−0.30)(1 - 0.30) to apply the 30.0%30.0\% reduction was correct, but the calculation carried forward the inaccurate baseline value from Step 1.

  3. Step 3

    FF=(GFRRPF)×100%  ⟹  FF=(92.4378)×100%=24.4%\text{FF} = \left(\frac{\text{GFR}}{\text{RPF}}\right) \times 100\% \implies \text{FF} = \left(\frac{92.4}{378}\right) \times 100\% = 24.4\%

    Correct

    FF=92.4462×100%=20.0%\text{FF} = \frac{92.4}{462} \times 100\% = 20.0\%

    You correctly applied the filtration fraction formula FF=GFRRPF\text{FF} = \frac{\text{GFR}}{\text{RPF}}, but the numerical result was affected by the earlier error in post-vasoconstriction RPF.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recognized that a 30.0%30.0\% decrease leaves 70.0%70.0\% of the baseline flow.

You correctly identified and applied the filtration fraction formula FF=GFRRPF\text{FF} = \frac{\text{GFR}}{\text{RPF}} using the post-vasoconstriction state.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Conflating Hematocrit with Plasma Fraction

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated hematocrit as the fraction of plasma rather than the fraction of packed red blood cells, omitting the complementary (1−Hct)(1 - \text{Hct}) factor.

REASONING PATH
Your ACEpath teacher’s suggested approach
Hematocrit vs. Plasma Volume
  • Whole Blood=Erythrocyte Volume (Hct)+Plasma Volume  ⟹  Plasma Fraction=1−Hct\text{Whole Blood} = \text{Erythrocyte Volume (Hct)} + \text{Plasma Volume} \implies \text{Plasma Fraction} = 1 - \text{Hct}

  • When converting whole-blood flow (RBF) to plasma flow (RPF), always multiply by (1−Hct)(1 - \text{Hct}).

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. RPFbaseline=1200 mL/min×(1−0.450)=660 mL/min\text{RPF}_{\text{baseline}} = 1200\text{ mL/min} \times (1 - 0.450) = 660\text{ mL/min}

  2. RPFpost=660 mL/min×(1−0.300)=462 mL/min\text{RPF}_{\text{post}} = 660\text{ mL/min} \times (1 - 0.300) = 462\text{ mL/min}

  3. FF=92.4 mL/min462 mL/min=0.200=20.0%\text{FF} = \frac{92.4\text{ mL/min}}{462\text{ mL/min}} = 0.200 = 20.0\%

Final answer

(a) 660 mL/min660\text{ mL/min}; (b) 462 mL/min462\text{ mL/min}; (c) 20.0%20.0\%

NEXT STEPS
Final Takeaways from Your Teacher
  • Remember that hematocrit measures cellular content, so plasma is always 1−Hct1 - \text{Hct}.

  • Double-check blood-to-plasma conversions before propagating flow values into downstream equations like filtration fraction.

OverviewACEpath Teacher's Diagnosis

02 The student calculates the reduction in RPF as the post-vasoconstriction value rather than subtracting it from baseline RPF.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    RPF=1200×(1−0.450)  ⟹  RPF=1200×0.550=660 mL/min\text{RPF} = 1200 \times (1 - 0.450) \implies \text{RPF} = 1200 \times 0.550 = 660\text{ mL/min}

  2. Step 2

    Post-vasoconstriction RPF=660×0.300=198 mL/min\text{Post-vasoconstriction RPF} = 660 \times 0.300 = 198\text{ mL/min}

    Correct

    RPFpost=660 mL/min×(1−0.300)=462 mL/min\text{RPF}_{\text{post}} = 660\text{ mL/min} \times (1 - 0.300) = 462\text{ mL/min}

    You calculated the decrease in plasma flow (198 mL/min198\text{ mL/min}) rather than the remaining flow after vasoconstriction. A 30.0%30.0\% reduction means 100%−30.0%=70.0%100\% - 30.0\% = 70.0\% of the baseline flow remains: 660×0.700=462 mL/min660 \times 0.700 = 462\text{ mL/min}.

  3. Step 3

    FF=(92.4198)×100%=46.7%\text{FF} = \left(\frac{92.4}{198}\right) \times 100\% = 46.7\%

    Correct

    FF=92.4 mL/min462 mL/min×100%=20.0%\text{FF} = \frac{92.4\text{ mL/min}}{462\text{ mL/min}} \times 100\% = 20.0\%

    You applied the correct filtration fraction formula (FF=GFRRPF\text{FF} = \frac{\text{GFR}}{\text{RPF}}) to your previous number, but because 198 mL/min198\text{ mL/min} was incorrect, the resulting percentage was also affected.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the relationship RPF=RBF×(1−Hct)\text{RPF} = \text{RBF} \times (1 - \text{Hct}) to find baseline plasma flow.

You correctly identified and applied the formula FF=GFRRPF\text{FF} = \frac{\text{GFR}}{\text{RPF}} to relate glomerular filtration rate to renal plasma flow.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Confused reduction amount with remaining value

You multiplied baseline RPF directly by 0.3000.300 instead of subtracting that fraction from 11.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

When a physiological variable decreases 'by' a percentage, the new value is (1−fraction)×baseline(1 - \text{fraction}) \times \text{baseline}, whereas multiplying directly by the percentage gives only the absolute change or loss.

REASONING PATH
Your ACEpath teacher’s suggested approach
'Decreased by' vs. 'Decreased to'
  • A decrease of x%x\% leaves (1−x/100)(1 - x/100) of the original quantity.

  • Check whether the problem asks for the change (Δ\Delta) or the resulting new steady-state value.

Physiological Sanity Check for FF
  • Typical mammalian filtration fraction is around 15%–25%15\%\text{--}25\%.

  • If your calculated FF\text{FF} exceeds 40%40\%, check whether your denominator (post-constriction RPF) was underestimated.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Subtract the reduction percentage from 100%100\%: 1−0.300=0.7001 - 0.300 = 0.700.

  2. Calculate post-vasoconstriction RPF\text{RPF}: 660 mL/min×0.700=462 mL/min660\text{ mL/min} \times 0.700 = 462\text{ mL/min}.

  3. Recalculate filtration fraction: FF=92.4 mL/min462 mL/min=0.200=20.0%\text{FF} = \frac{92.4\text{ mL/min}}{462\text{ mL/min}} = 0.200 = 20.0\%.

Final answer

(a) Baseline RPF=660 mL/min\text{RPF} = 660\text{ mL/min}; (b) Post-vasoconstriction RPF=462 mL/min\text{RPF} = 462\text{ mL/min}; (c) FF=20.0%\text{FF} = 20.0\%

NEXT STEPS
Final Takeaways from Your Teacher
  • Always write down (1−percentage decrease)(1 - \text{percentage decrease}) explicitly before multiplying.

  • Perform a physiological plausibility check on kidney filtration fraction (normally ∼20%\sim 20\%) to catch denominator errors early.

OverviewACEpath Teacher's Diagnosis

03 The student calculates filtration fraction using baseline RPF instead of post-vasoconstriction RPF.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    RPF=1200×(1−0.450)=660 mL/min\text{RPF} = 1200 \times (1 - 0.450) = 660\text{ mL/min}

  2. Step 2

    Post-vasoconstriction RPF=660×(1−0.300)=462 mL/min\text{Post-vasoconstriction RPF} = 660 \times (1 - 0.300) = 462\text{ mL/min}

  3. Step 3

    FF=(GFRBaseline RPF)×100%  ⟹  FF=(92.4660)×100%=14.0%\text{FF} = \left(\frac{\text{GFR}}{\text{Baseline RPF}}\right) \times 100\% \implies \text{FF} = \left(\frac{92.4}{660}\right) \times 100\% = 14.0\%

    Correct

    FF=(GFRRPFpost)×100%=(92.4462)×100%=20.0%\text{FF} = \left(\frac{\text{GFR}}{\text{RPF}_{\text{post}}}\right) \times 100\% = \left(\frac{92.4}{462}\right) \times 100\% = 20.0\%

    Filtration fraction must compare GFR and RPF measured under the exact same physiological state. Because the GFR of 92.4 mL/min92.4\text{ mL/min} was measured after vasoconstriction, you must divide it by the post-vasoconstriction RPF (462 mL/min462\text{ mL/min}), not the baseline RPF.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used hematocrit to find the plasma fraction and calculated baseline RPF.

You correctly calculated the post-vasoconstriction RPF after a 30.0%30.0\% reduction.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Mismatched physiological states in ratio calculation

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You defined the filtration fraction formula using baseline RPF rather than matching the RPF to the specific physiological state (post-vasoconstriction) in which the GFR was measured.

REASONING PATH
Your ACEpath teacher’s suggested approach
State matching in physiological ratios
  • Every term in a ratio (such as FF=GFRRPF\text{FF} = \frac{\text{GFR}}{\text{RPF}}) must reflect the identical experimental or physiological condition.

  • Before computing FF\text{FF}, check whether the given GFR represents baseline, post-intervention, or drug-altered conditions, and pair it with the RPF from that exact condition.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify that the measured GFR=92.4 mL/min\text{GFR} = 92.4\text{ mL/min} represents the post-vasoconstriction state.

  2. Substitute the concurrent post-vasoconstriction RPF=462 mL/min\text{RPF} = 462\text{ mL/min} into the filtration fraction equation: FF=92.4 mL/min462 mL/min\text{FF} = \frac{92.4\text{ mL/min}}{462\text{ mL/min}}.

  3. Convert the ratio to a percentage: 0.200×100%=20.0%0.200 \times 100\% = 20.0\%.

Final answer

FF=20.0%\text{FF} = 20.0\%

NEXT STEPS
Final Takeaways from Your Teacher
  • Review how angiotensin II constricts the efferent arteriole to elevate filtration fraction during hypovolemia.

  • Practice pairing hemodynamic variables from matching physiological timepoints.

Lock it in

Similar question

01

A canine patient has a renal blood flow (RBF) of 500 mL/min500\text{ mL/min} and a hematocrit of 40.0%40.0\%. Calculate the baseline renal plasma flow (RPF) in mL/min\text{mL/min}.

Answer

RPF=RBF×(1−Hct)=500 mL/min×(1−0.400)=500×0.600=300 mL/min\text{RPF} = \text{RBF} \times (1 - \text{Hct}) = 500\text{ mL/min} \times (1 - 0.400) = 500 \times 0.600 = 300\text{ mL/min}.

02

An athlete experiences dehydration that raises hematocrit to 50.0%50.0\%. If their renal blood flow is measured at 1100 mL/min1100\text{ mL/min} and sympathetic tone reduces renal plasma flow by 20.0%20.0\%, calculate the post-reduction RPF in mL/min\text{mL/min}.

Answer

Baseline RPF=1100×(1−0.500)=550 mL/min\text{RPF} = 1100 \times (1 - 0.500) = 550\text{ mL/min}. Post-reduction RPF=550×(1−0.200)=550×0.800=440 mL/min\text{RPF} = 550 \times (1 - 0.200) = 550 \times 0.800 = 440\text{ mL/min}.

03

A patient has an RBF of 1000 mL/min1000\text{ mL/min} with a hematocrit of 42.0%42.0\%. Norepinephrine infusion reduces RPF by 25.0%25.0\%. If the glomerular filtration rate stabilizes at 87.0 mL/min87.0\text{ mL/min}, determine the resulting filtration fraction (FF) as a percentage.

Answer
  1. Baseline RPF=1000×(1−0.420)=580 mL/min\text{RPF} = 1000 \times (1 - 0.420) = 580\text{ mL/min}.\n2. Post-constriction RPF=580×(1−0.250)=435 mL/min\text{RPF} = 580 \times (1 - 0.250) = 435\text{ mL/min}.\n3. FF=GFRRPF=87.0435=0.200=20.0%\text{FF} = \frac{\text{GFR}}{\text{RPF}} = \frac{87.0}{435} = 0.200 = 20.0\%.
Loading workspace…