Resources

A clinical laboratory receives an intravenous formulation of ampicillin specified at a concentration of 25.0 mg/dL25.0\text{ mg/dL}. To establish whether this preparation exceeds the minimum inhibitory concentration (MIC) of an emerging ampicillin-resistant strain, the concentration must be converted to standard molarity and μg/mL\mu\text{g/mL}. Given the molar mass of ampicillin is M=349.4 g/molM = 349.4\text{ g/mol}: (a) Convert 25.0 mg/dL25.0\text{ mg/dL} into μg/mL\mu\text{g/mL}. (b) Calculate the molarity of the solution in millimoles per liter (mmol/L\text{mmol/L}). (c) If the strain's measured MIC\text{MIC} is 64.0 μg/mL64.0\ \mu\text{g/mL}, calculate the ratio CdrugMIC\frac{C_{\text{drug}}}{\text{MIC}} and determine if the formulation provides an inhibitory concentration.

Answer and steps

Final answer

(a) 250 μg/mL250\ \mu\text{g/mL}; (b) 0.715 mmol/L0.715\text{ mmol/L}; (c) Ratio =3.91= 3.91, which exceeds 1.001.00, confirming an inhibitory concentration.

Steps

01

Convert concentration to μg/mL\mu\text{g/mL}

Use unit factor conversions to relate milligrams (mg\text{mg}) to micrograms (μg\mu\text{g}) and deciliters (dL\text{dL}) to milliliters (mL\text{mL}):

  • 1 mg=1000 μg1\text{ mg} = 1000\ \mu\text{g}
  • 1 dL=100 mL1\text{ dL} = 100\text{ mL}

Set up the dimensional analysis: C=25.0 mg/dL×1000 μg1 mg×1 dL100 mLC = 25.0\text{ mg/dL} \times \frac{1000\ \mu\text{g}}{1\text{ mg}} \times \frac{1\text{ dL}}{100\text{ mL}}

C=25.0×10 μg/mL=250 μg/mLC = 25.0 \times 10\ \mu\text{g/mL} = 250\ \mu\text{g/mL}


02

Calculate the molarity in mmol/L\text{mmol/L}

Express the concentration in grams per liter (g/L\text{g/L}):

  • 250 μg/mL=250 mg/L=0.250 g/L250\ \mu\text{g/mL} = 250\text{ mg/L} = 0.250\text{ g/L}

Using the molar mass M=349.4 g/molM = 349.4\text{ g/mol}, find the molar concentration: Molarity=0.250 g/L349.4 g/mol≈0.0007155 mol/L\text{Molarity} = \frac{0.250\text{ g/L}}{349.4\text{ g/mol}} \approx 0.0007155\text{ mol/L}

Convert moles per liter to millimoles per liter (mmol/L\text{mmol/L}): 0.0007155 mol/L×1000 mmol/mol≈0.715 mmol/L0.0007155\text{ mol/L} \times 1000\text{ mmol/mol} \approx 0.715\text{ mmol/L}


03

Evaluate against the Minimum Inhibitory Concentration (MIC\text{MIC})

The minimum inhibitory concentration represents the lowest concentration of an antimicrobial agent required to inhibit the visible growth of a bacterium. An antibiotic formulation is effective at inhibiting growth if its concentration CdrugC_{\text{drug}} meets or exceeds the MIC\text{MIC}: Ratio=CdrugMIC=250 μg/mL64.0 μg/mL≈3.91\text{Ratio} = \frac{C_{\text{drug}}}{\text{MIC}} = \frac{250\ \mu\text{g/mL}}{64.0\ \mu\text{g/mL}} \approx 3.91

Because the ratio is 3.91>1.003.91 > 1.00 (meaning Cdrug>MICC_{\text{drug}} > \text{MIC}), the intravenous drug concentration is well above the threshold necessary to inhibit bacterial growth.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student misinterprets 1 deciliter as 10 milliliters instead of 100 milliliters, overestimating the concentration tenfold.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    1 dL=10 mL  ⟹  25.0 mg/dL=25.0 mg/10 mL=25000 μg/10 mL  ⟹  25.0 mg/dL=2500 μg/mL1\text{ dL} = 10\text{ mL} \implies 25.0\text{ mg/dL} = 25.0\text{ mg}/10\text{ mL} = 25000\ \mu\text{g}/10\text{ mL} \implies 25.0\text{ mg/dL} = 2500\ \mu\text{g/mL}

    Correct

    1 dL=100 mL  ⟹  25.0 mg/dL×1000 μg1 mg×1 dL100 mL=250 μg/mL1\text{ dL} = 100\text{ mL} \implies 25.0\text{ mg/dL} \times \frac{1000\ \mu\text{g}}{1\text{ mg}} \times \frac{1\text{ dL}}{100\text{ mL}} = 250\ \mu\text{g/mL}

    You correctly converted milligrams to micrograms (25.0 mg=25000 μg25.0\text{ mg} = 25000\ \mu\text{g}), but you equated 1 dL1\text{ dL} to 10 mL10\text{ mL} rather than 100 mL100\text{ mL}. Because a deciliter is one-tenth of a liter (100 mL100\text{ mL}), dividing by 10 mL10\text{ mL} made your resulting concentration ten times too large.

  2. Step 2

    2500 μg/mL=2.50 g/L  ⟹  Molarity=2.50 g/L349.4 g/mol  ⟹  Molarity=7.16 mmol/L2500\ \mu\text{g/mL} = 2.50\text{ g/L} \implies \text{Molarity} = \frac{2.50\text{ g/L}}{349.4\text{ g/mol}} \implies \text{Molarity} = 7.16\text{ mmol/L}

    Correct

    250 μg/mL=0.250 g/L  ⟹  Molarity=0.250 g/L349.4 g/mol≈0.715 mmol/L250\ \mu\text{g/mL} = 0.250\text{ g/L} \implies \text{Molarity} = \frac{0.250\text{ g/L}}{349.4\text{ g/mol}} \approx 0.715\text{ mmol/L}

    Your dimensional analysis and conversion from grams per liter to millimoles per liter were executed accurately using your value from part (a). However, the result was tenfold too high due to the propagated conversion error.

  3. Step 3

    CdrugMIC\frac{C_{\text{drug}}}{\text{MIC}} = 2500 μg/mL64.0 μg/mL\frac{2500\ \mu\text{g/mL}}{64.0\ \mu\text{g/mL}} = 39.1   ⟹  \implies Since \text{Since } 39.1 > 1, the formulation provides an inhibitory concentration.\text{, the formulation provides an inhibitory concentration.}$

    Correct

    CdrugMIC\frac{C_{\text{drug}}}{\text{MIC}} = 250 μg/mL64.0 μg/mL\frac{250\ \mu\text{g/mL}}{64.0\ \mu\text{g/mL}} ≈\approx 3.91   ⟹  \implies Since \text{Since } 3.91 > 1.00, the formulation provides an inhibitory concentration.\text{, the formulation provides an inhibitory concentration.}$

    You correctly identified how to evaluate an inhibitory threshold by setting up the ratio CdrugMIC\frac{C_{\text{drug}}}{\text{MIC}} and comparing it to 11. While your qualitative conclusion is correct, the numeric value reflects the initial deciliter conversion error.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly converted milligrams to micrograms using 1 mg=1000 μg1\text{ mg} = 1000\ \mu\text{g}.

You applied the correct relationship between mass concentration, molar mass, and molarity.

You set up the ratio of drug concentration to MIC and correctly interpreted whether it exceeded the inhibitory threshold.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Metric Prefix Misinterpretation

Equating 1 dL1\text{ dL} to 10 mL10\text{ mL} instead of 100 mL100\text{ mL}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the metric prefix 'deci-' (10−110^{-1}) with a factor of 1010 relative to milliliters (10−310^{-3}) rather than recognizing that 1 L=10 dL=1000 mL1\text{ L} = 10\text{ dL} = 1000\text{ mL}, which makes 1 dL=100 mL1\text{ dL} = 100\text{ mL}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Metric Prefix Step-Down
  • deci=10−1\text{deci} = 10^{-1}, centi=10−2\text{centi} = 10^{-2}, milli=10−3\text{milli} = 10^{-3}

  • When converting between deciliters and milliliters, relate both to the base unit liter: 1 dL=0.1 L=100 mL1\text{ dL} = 0.1\text{ L} = 100\text{ mL}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. C=25.0 mg/dL×1000 μg1 mg×1 dL100 mL=250 μg/mLC = 25.0\text{ mg/dL} \times \frac{1000\ \mu\text{g}}{1\text{ mg}} \times \frac{1\text{ dL}}{100\text{ mL}} = 250\ \mu\text{g/mL}

  2. 250 μg/mL=0.250 g/L250\ \mu\text{g/mL} = 0.250\text{ g/L}

  3. Molarity=0.250 g/L349.4 g/mol≈0.0007155 mol/L=0.715 mmol/L\text{Molarity} = \frac{0.250\text{ g/L}}{349.4\text{ g/mol}} \approx 0.0007155\text{ mol/L} = 0.715\text{ mmol/L}

  4. Ratio=250 μg/mL64.0 μg/mL≈3.91\text{Ratio} = \frac{250\ \mu\text{g/mL}}{64.0\ \mu\text{g/mL}} \approx 3.91

Final answer

(a) 250 μg/mL250\ \mu\text{g/mL}; (b) 0.715 mmol/L0.715\text{ mmol/L}; (c) Ratio=3.91>1.00\text{Ratio} = 3.91 > 1.00, confirming an inhibitory concentration.

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the common metric volume relationships derived from 1 L1\text{ L}: 1 L=10 dL=1000 mL1\text{ L} = 10\text{ dL} = 1000\text{ mL}, so 1 dL=100 mL1\text{ dL} = 100\text{ mL}.

  • Always use chained fraction cancellation (dimensional analysis) rather than informal substitution when converting compound clinical units.

OverviewACEpath Teacher's Diagnosis

02 The student confuses the metric prefix micro with milli and equates 1 mg/dL directly to 1 µg/mL, leading to an underestimated drug concentration that falls below the MIC.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    1 mg/dL=1 μg/mL  ⟹  25.0 mg/dL=25.0 μg/mL1\text{ mg/dL} = 1\ \mu\text{g/mL} \implies 25.0\text{ mg/dL} = 25.0\ \mu\text{g/mL}

    Correct

    25.0 mg/dL×1000 μg1 mg×1 dL100 mL=250 μg/mL25.0\text{ mg/dL} \times \frac{1000\ \mu\text{g}}{1\text{ mg}} \times \frac{1\text{ dL}}{100\text{ mL}} = 250\ \mu\text{g/mL}

    You set 1 mg/dL1\text{ mg/dL} equal to 1 μg/mL1\ \mu\text{g/mL}. Because 1 mg=1000 μg1\text{ mg} = 1000\ \mu\text{g} and 1 dL=100 mL1\text{ dL} = 100\text{ mL}, the true ratio is 1000 μg100 mL=10 μg/mL\frac{1000\ \mu\text{g}}{100\text{ mL}} = 10\ \mu\text{g/mL}, making the concentration 250 μg/mL250\ \mu\text{g/mL}.

  2. Step 2

    25.0 mg/dL=0.250 g/L  ⟹  Molarity=0.250 g/L349.4 g/mol  ⟹  Molarity=0.716 mmol/L25.0\text{ mg/dL} = 0.250\text{ g/L} \implies \text{Molarity} = \frac{0.250\text{ g/L}}{349.4\text{ g/mol}} \implies \text{Molarity} = 0.716\text{ mmol/L}

  3. Step 3

    Cdrug/MIC=25.0 μg/mL64.0 μg/mL=0.391  ⟹  Since 0.391<1, the formulation does not provide an inhibitory concentration.C_{\text{drug}}/\text{MIC} = \frac{25.0\ \mu\text{g/mL}}{64.0\ \mu\text{g/mL}} = 0.391 \implies \text{Since } 0.391 < 1\text{, the formulation does not provide an inhibitory concentration.}

    Correct

    CdrugMIC=250 μg/mL64.0 μg/mL≈3.91  ⟹  3.91>1.00, providing an effective inhibitory concentration.\frac{C_{\text{drug}}}{\text{MIC}} = \frac{250\ \mu\text{g/mL}}{64.0\ \mu\text{g/mL}} \approx 3.91 \implies 3.91 > 1.00\text{, providing an effective inhibitory concentration.}

    Your comparison logic is sound, but your calculation carried over the incorrect concentration of 25.0 μg/mL25.0\ \mu\text{g/mL} from part (a). Using the correct value of 250 μg/mL250\ \mu\text{g/mL} yields a ratio of 3.913.91, which confirms that the formulation exceeds the minimum inhibitory concentration.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly converted 25.0 mg/dL25.0\text{ mg/dL} into 0.250 g/L0.250\text{ g/L} to find the molar concentration.

You correctly applied the molar mass to compute molarity in mmol/L\text{mmol/L}.

You understood that a drug concentration must exceed the MIC\text{MIC} (ratio >1> 1) to inhibit bacterial growth.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Compound Unit Conversion Factor Error

You treated milligrams per deciliter as directly equivalent to micrograms per milliliter without expanding the prefix conversion factors.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Failing to write out explicit dimensional analysis for compound metric units (1 mg=103 μg1\text{ mg} = 10^3\ \mu\text{g} and 1 dL=102 mL1\text{ dL} = 10^2\text{ mL}), leading to a missing factor of 1010.

REASONING PATH
Your ACEpath teacher’s suggested approach
Break Down Compound Units
  • Convert the numerator and denominator independently using cancellation factors: 1 mg1 dL=1000 μg100 mL=10 μg/mL\frac{1\text{ mg}}{1\text{ dL}} = \frac{1000\ \mu\text{g}}{100\text{ mL}} = 10\ \mu\text{g/mL}.

  • Whenever converting units like mg/dL\text{mg/dL} to μg/mL\mu\text{g/mL}, write out both unit fractions explicitly instead of relying on memory.

Check Clinical Consistency
  • Compare values across parts of your work: 0.250 g/L=250 mg/L=250 μg/mL0.250\text{ g/L} = 250\text{ mg/L} = 250\ \mu\text{g/mL}.

  • Notice that 1 mg/L=1 μg/mL1\text{ mg/L} = 1\ \mu\text{g/mL}. Since 25.0 mg/dL=250 mg/L25.0\text{ mg/dL} = 250\text{ mg/L}, the value in μg/mL\mu\text{g/mL} must also be 250250.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert 25.0 mg/dL25.0\text{ mg/dL} using dimensional analysis: 25.0 mg/dL×1000 μg1 mg×1 dL100 mL=250 μg/mL25.0\text{ mg/dL} \times \frac{1000\ \mu\text{g}}{1\text{ mg}} \times \frac{1\text{ dL}}{100\text{ mL}} = 250\ \mu\text{g/mL}.

  2. Calculate the inhibitory ratio: CdrugMIC=250 μg/mL64.0 μg/mL≈3.91\frac{C_{\text{drug}}}{\text{MIC}} = \frac{250\ \mu\text{g/mL}}{64.0\ \mu\text{g/mL}} \approx 3.91.

  3. Conclude efficacy: Because 3.91>1.003.91 > 1.00, the intravenous drug concentration is sufficient to inhibit the bacterial strain.

Final answer

(a) 250 μg/mL250\ \mu\text{g/mL}; (b) 0.715 mmol/L0.715\text{ mmol/L}; (c) Ratio =3.91= 3.91, which exceeds 1.001.00, confirming an inhibitory concentration.

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice converting compound metric clinical units using explicit factor-label cancellation lines.

  • Verify your converted concentration against standard equivalent benchmarks (such as 1 mg/dL=10 mg/L=10 μg/mL1\text{ mg/dL} = 10\text{ mg/L} = 10\ \mu\text{g/mL}) before evaluating pharmacokinetic efficacy.

OverviewACEpath Teacher's Diagnosis

03 The student inverts the ratio definition by computing MIC / C_drug instead of C_drug / MIC.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    1 dL=100 mL  ⟹  25.0 mg/dL=25000 μg100 mL  ⟹  25.0 mg/dL=250 μg/mL1\text{ dL} = 100\text{ mL} \implies 25.0\text{ mg/dL} = \frac{25000\ \mu\text{g}}{100\text{ mL}} \implies 25.0\text{ mg/dL} = 250\ \mu\text{g/mL}

  2. Step 2

    250 μg/mL=0.250 g/L  ⟹  Molarity=0.250 g/L349.4 g/mol  ⟹  Molarity=0.716 mmol/L250\ \mu\text{g/mL} = 0.250\text{ g/L} \implies \text{Molarity} = \frac{0.250\text{ g/L}}{349.4\text{ g/mol}} \implies \text{Molarity} = 0.716\text{ mmol/L}

  3. Step 3

    Ratio=64.0 μg/mL250 μg/mL=0.256  ⟹  Since the ratio is 0.256, which is less than 1, the concentration is not inhibitory.\text{Ratio} = \frac{64.0\ \mu\text{g/mL}}{250\ \mu\text{g/mL}} = 0.256 \implies \text{Since the ratio is } 0.256\text{, which is less than } 1\text{, the concentration is not inhibitory.}

    Correct

    Ratio=CdrugMIC=250 μg/mL64.0 μg/mL≈3.91  ⟹  3.91>1.00, confirming an inhibitory concentration.\text{Ratio} = \frac{C_{\text{drug}}}{\text{MIC}} = \frac{250\ \mu\text{g/mL}}{64.0\ \mu\text{g/mL}} \approx 3.91 \implies 3.91 > 1.00\text{, confirming an inhibitory concentration.}

    You set up the ratio as MICCdrug\frac{\text{MIC}}{C_{\text{drug}}} instead of CdrugMIC\frac{C_{\text{drug}}}{\text{MIC}}. Because the actual drug concentration (250 μg/mL250\ \mu\text{g/mL}) is greater than the minimum inhibitory concentration (64.0 μg/mL64.0\ \mu\text{g/mL}), the correct ratio is approximately 3.913.91, which confirms that the concentration is inhibitory.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly converted mass and volume units across prefixes to reach 250 μg/mL250\ \mu\text{g/mL}.

You converted mass concentration to molarity accurately using the molar mass of ampicillin.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverted Ratio Definition

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You swapped the numerator and denominator when setting up the ratio of drug concentration to minimum inhibitory concentration, leading to an inverted comparison against the threshold value of 1.

REASONING PATH
Your ACEpath teacher’s suggested approach
Ratio Direction Check
  • To determine if a drug level reaches or exceeds an antimicrobial threshold, compare the administered drug concentration CdrugC_{\text{drug}} to the required threshold MIC\text{MIC} using CdrugMIC\frac{C_{\text{drug}}}{\text{MIC}}.

  • Check whether the numerator represents the available drug amount and the denominator represents the target requirement.

Inhibition Threshold Interpretation
  • Inhibition requires Cdrug≥MICC_{\text{drug}} \ge \text{MIC}, which corresponds to CdrugMIC≥1.00\frac{C_{\text{drug}}}{\text{MIC}} \ge 1.00.

  • Before concluding whether a drug works, sanity-check the raw numbers: if 250 μg/mL250\ \mu\text{g/mL} is larger than 64.0 μg/mL64.0\ \mu\text{g/mL}, the drug concentration already exceeds the minimum required.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set up the ratio with drug concentration in the numerator and MIC\text{MIC} in the denominator: Ratio=CdrugMIC=250 μg/mL64.0 μg/mL\text{Ratio} = \frac{C_{\text{drug}}}{\text{MIC}} = \frac{250\ \mu\text{g/mL}}{64.0\ \mu\text{g/mL}}.

  2. Evaluate the quotient: 25064.0≈3.91\frac{250}{64.0} \approx 3.91.

  3. Compare the ratio to 1.001.00: since 3.91>1.003.91 > 1.00, Cdrug>MICC_{\text{drug}} > \text{MIC}, so the formulation provides an inhibitory concentration.

Final answer

(a) 250 μg/mL250\ \mu\text{g/mL}; (b) 0.715 mmol/L0.715\text{ mmol/L} (or 0.716 mmol/L0.716\text{ mmol/L}); (c) Ratio=3.91\text{Ratio} = 3.91, which exceeds 1.001.00, confirming an inhibitory concentration.

NEXT STEPS
Final Takeaways from Your Teacher
  • Always write out the algebraic formula CdrugMIC\frac{C_{\text{drug}}}{\text{MIC}} before plugging in values to avoid inverting fractions.

  • Perform an intuitive sanity check by directly comparing the two values: if available concentration exceeds the minimum inhibitory concentration, the drug inhibits bacterial growth.

Lock it in

Similar question

01

A clinical formulation of gentamicin has a concentration of 12.0 mg/dL12.0\text{ mg/dL}. Convert this concentration into μg/mL\mu\text{g/mL}.

Answer

120 μg/mL120\ \mu\text{g/mL}. Multiply by 1000 μg1 mg\frac{1000\ \mu\text{g}}{1\text{ mg}} and divide by 100 mL1 dL\frac{100\text{ mL}}{1\text{ dL}}: 12.0×10=120 μg/mL12.0 \times 10 = 120\ \mu\text{g/mL}.

02

A cefotaxime solution is prepared at 40.0 mg/dL40.0\text{ mg/dL}. Given its molar mass is 455.5 g/mol455.5\text{ g/mol}, calculate its molarity in mmol/L\text{mmol/L}.

Answer

0.878 mmol/L0.878\text{ mmol/L}. First, 40.0 mg/dL=400 mg/L=0.400 g/L40.0\text{ mg/dL} = 400\text{ mg/L} = 0.400\text{ g/L}. Then, Molarity=0.400 g/L455.5 g/mol≈0.000878 mol/L=0.878 mmol/L\text{Molarity} = \frac{0.400\text{ g/L}}{455.5\text{ g/mol}} \approx 0.000878\text{ mol/L} = 0.878\text{ mmol/L}.

03

A vancomycin intravenous solution is supplied at 18.0 mg/dL18.0\text{ mg/dL}. A resistant Enterococcus isolate has an MIC\text{MIC} of 32.0 μg/mL32.0\ \mu\text{g/mL}. Determine whether the solution provides an inhibitory concentration by calculating CdrugMIC\frac{C_{\text{drug}}}{\text{MIC}}.

Answer

Ratio=5.63\text{Ratio} = 5.63; the formulation is inhibitory. Convert concentration: 18.0 mg/dL×10=180 μg/mL18.0\text{ mg/dL} \times 10 = 180\ \mu\text{g/mL}. Compute ratio: 180 μg/mL32.0 μg/mL=5.625≈5.63\frac{180\ \mu\text{g/mL}}{32.0\ \mu\text{g/mL}} = 5.625 \approx 5.63. Since 5.63>1.005.63 > 1.00, Cdrug>MICC_{\text{drug}} > \text{MIC}.

Loading workspace…