Resources

A flaccid root cortical cell has an internal solute potential Ψs=−0.920 MPa\Psi_s = -0.920\text{ MPa} and zero turgor pressure (Ψp=0 MPa\Psi_p = 0\text{ MPa}). It is immersed into an open aqueous solution of potassium nitrate (KNO3\text{KNO}_3, i=2.0i = 2.0) at 27∘C27^\circ\text{C} (300.15 K300.15\text{ K}, R=0.00831 L⋅MPa/(mol⋅K)R = 0.00831\text{ L}\cdot\text{MPa}/(\text{mol}\cdot\text{K})). Determine the critical threshold concentration of KNO3\text{KNO}_3 in M\text{M} above which the cell will lose water and undergo plasmolyzing cell shrinkage (hypertonic boundary) rather than water uptake. Round your answer to three significant figures.

Answer and steps

Final answer

Ccrit=0.184 MC_{\text{crit}} = 0.184\text{ M}

Steps

Understanding Total Water Potential

Water moves down a water potential gradient from regions of higher (less negative) water potential (Ψ\Psi) to regions of lower (more negative) water potential.

The total water potential of a plant cell is given by: Ψcell=Ψs+Ψp\Psi_{\text{cell}} = \Psi_s + \Psi_p

where:

  • Ψs\Psi_s is the solute (osmotic) potential.
  • Ψp\Psi_p is the turgor (pressure) potential.

For the given flaccid cell: Ψcell=−0.920 MPa+0 MPa=−0.920 MPa\Psi_{\text{cell}} = -0.920\text{ MPa} + 0\text{ MPa} = -0.920\text{ MPa}


Solute Potential of the External Solution

The external solution is in an open beaker, which means it experiences atmospheric pressure and its pressure potential is zero (Ψp=0 MPa\Psi_p = 0\text{ MPa}). Therefore, the water potential of the solution equals its solute potential: Ψsol=Ψs,sol\Psi_{\text{sol}} = \Psi_{s,\text{sol}}

By the van 't Hoff equation: Ψs,sol=−iCRT\Psi_{s,\text{sol}} = -i C R T

where:

  • i=2.0i = 2.0 (van 't Hoff factor for KNOX3\ce{KNO3}, which dissociates into KX+\ce{K+} and NOX3X−\ce{NO3-}),
  • CC is the molar concentration of the solution (mol/L\text{mol/L} or M\text{M}),
  • R=0.00831 L⋅MPa/(mol⋅K)R = 0.00831\text{ L}\cdot\text{MPa}/(\text{mol}\cdot\text{K}),
  • T=300.15 KT = 300.15\text{ K}.

Finding the Critical Threshold Concentration

At the boundary between water uptake and water loss, the system is in dynamic equilibrium with no net movement of water (Ψcell=Ψsol\Psi_{\text{cell}} = \Psi_{\text{sol}}): −0.920 MPa=−iCcritRT-0.920\text{ MPa} = -i C_{\text{crit}} R T

Canceling the negative signs gives: iCcritRT=0.920 MPai C_{\text{crit}} R T = 0.920\text{ MPa}

Now, substitute the known numerical values into the equation: (2.0)(Ccrit)(0.00831 L⋅MPa/(mol⋅K))(300.15 K)=0.920 MPa(2.0)(C_{\text{crit}})(0.00831\text{ L}\cdot\text{MPa}/(\text{mol}\cdot\text{K}))(300.15\text{ K}) = 0.920\text{ MPa}

Ccrit⋅4.9885 L⋅MPa/mol=0.920 MPaC_{\text{crit}} \cdot 4.9885\text{ L}\cdot\text{MPa}/\text{mol} = 0.920\text{ MPa}

Solve for CcritC_{\text{crit}}: Ccrit=0.9204.9885 M≈0.1844 MC_{\text{crit}} = \frac{0.920}{4.9885}\text{ M} \approx 0.1844\text{ M}

Rounding to three significant figures yields: Ccrit=0.184 MC_{\text{crit}} = 0.184\text{ M}

If the concentration of the KNOX3\ce{KNO3} solution exceeds 0.184 M0.184\text{ M}, Ψsol\Psi_{\text{sol}} becomes more negative than −0.920 MPa-0.920\text{ MPa}, causing water to leave the cell and inducing plasmolysis.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student ignores the van 't Hoff ionization factor i = 2.0 for potassium nitrate, effectively setting i = 1, which doubles the calculated threshold concentration.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Ψcell=−0.920+0=−0.920 MPa\Psi_{\text{cell}} = -0.920 + 0 = -0.920\text{ MPa}

  2. Step 2

    Ψsol=−CRT=−0.920 MPa\Psi_{\text{sol}} = -CRT = -0.920\text{ MPa}

    Correct

    Ψsol=−iCRT=−0.920 MPa\Psi_{\text{sol}} = -iCRT = -0.920\text{ MPa}

    You omitted the van 't Hoff ionization factor i=2.0i = 2.0 for KNOX3\ce{KNO3}. Because potassium nitrate dissociates into KX+\ce{K+} and NOX3X−\ce{NO3-} ions in aqueous solution, the solute potential formula is Ψs=−iCRT\Psi_s = -iCRT rather than −CRT-CRT.

  3. Step 3

    C=0.9200.00831×300.15  ⟹  C=0.9202.494=0.369 MC = \frac{0.920}{0.00831 \times 300.15} \implies C = \frac{0.920}{2.494} = 0.369\text{ M}

    Correct

    Ccrit=0.9202.0×0.00831×300.15≈0.184 MC_{\text{crit}} = \frac{0.920}{2.0 \times 0.00831 \times 300.15} \approx 0.184\text{ M}

    Your algebraic rearrangement and arithmetic followed accurately from your formula in Step 2, but the missing factor of 2.02.0 in the denominator caused your final concentration to be twice the correct value.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that a flaccid cell has zero turgor pressure (Ψp=0 MPa\Psi_p = 0\text{ MPa}).

You correctly equated the cell water potential to the external solution water potential to define the critical equilibrium threshold.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omitted van 't Hoff factor

You treated the electrolyte KNOX3\ce{KNO3} as a non-ionizing solute with i=1i = 1.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Overlooking that ionic salts dissociate into multiple particles in aqueous solution, requiring the van 't Hoff factor ii in the solute potential equation Ψs=−iCRT\Psi_s = -iCRT.

REASONING PATH
Your ACEpath teacher’s suggested approach
Electrolyte Dissociation
  • For any solute that dissociates into ions, include ii in Ψs=−iCRT\Psi_s = -iCRT.

  • Check the chemical formula and given ii value before expanding the solute potential equation.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Include the van 't Hoff factor i=2.0i = 2.0 in the solute potential formula: Ψsol=−iCcritRT=−0.920 MPa\Psi_{\text{sol}} = -i C_{\text{crit}} R T = -0.920\text{ MPa}.

  2. Rearrange to solve for CcritC_{\text{crit}}: Ccrit=0.920iRT=0.9202.0×0.00831×300.15C_{\text{crit}} = \frac{0.920}{i R T} = \frac{0.920}{2.0 \times 0.00831 \times 300.15}.

  3. Evaluate the denominator and compute the value: Ccrit=0.9204.9885≈0.184 MC_{\text{crit}} = \frac{0.920}{4.9885} \approx 0.184\text{ M}.

Final answer

Ccrit=0.184 MC_{\text{crit}} = 0.184\text{ M}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review how ionic versus non-ionic solutes affect colligative properties and solute potential.

  • Practice identifying the van 't Hoff factor (ii) for salts like NaCl\ce{NaCl}, CaClX2\ce{CaCl2}, and KNOX3\ce{KNO3}.

OverviewACEpath Teacher's Diagnosis

02 The student uses Celsius temperature 27 instead of absolute temperature in Kelvin, leading to an artificially high concentration.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Ψcell=−0.920 MPa  ⟹  Ψsol=−iCRT\Psi_{\text{cell}} = -0.920\text{ MPa} \implies \Psi_{\text{sol}} = -iCRT

  2. Step 2

    −0.920=−2.0×C×0.00831×27-0.920 = -2.0 \times C \times 0.00831 \times 27

    Correct

    −0.920=−2.0×C×0.00831×300.15-0.920 = -2.0 \times C \times 0.00831 \times 300.15

    You substituted T=27T = 27 instead of converting or using the absolute temperature in Kelvin (T=300.15 KT = 300.15\text{ K}). Because the gas constant RR has units of L⋅MPa/(mol⋅K)\text{L}\cdot\text{MPa}/(\text{mol}\cdot\text{K}), the temperature must be expressed in Kelvin.

  3. Step 3

    C=0.9200.44874=2.05 MC = \frac{0.920}{0.44874} = 2.05\text{ M}

    Correct

    C=0.9204.9885≈0.184 MC = \frac{0.920}{4.9885} \approx 0.184\text{ M}

    Your algebraic division was carried out correctly according to your numbers, but the final value was inflated due to using 2727 instead of 300.15 K300.15\text{ K}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly determined that the flaccid cell has a total water potential of −0.920 MPa-0.920\text{ MPa} because turgor pressure is zero.

You recognized that the external solution in an open beaker has zero pressure potential, meaning Ψ=Ψs\Psi = \Psi_s.

You accurately recalled the van 't Hoff formula Ψs=−iCRT\Psi_s = -iCRT and identified i=2.0i = 2.0 for potassium nitrate.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Temperature Unit Error

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You plugged in temperature using Celsius (27∘C27^\circ\text{C}) instead of absolute thermodynamic temperature in Kelvin (300.15 K300.15\text{ K}), which mismatched the Kelvin unit in the ideal gas constant RR.

REASONING PATH
Your ACEpath teacher’s suggested approach
Gas Constant Unit Check
  • In thermodynamic equations such as Ψs=−iCRT\Psi_s = -iCRT, temperature must match the unit in RR (Kelvin).

  • Always inspect the unit denominator of RR (here K\text{K}) and convert Celsius to Kelvin using T=T∘C+273.15T = T_{^\circ\text{C}} + 273.15.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Substitute the correct absolute temperature into the van 't Hoff relation: −0.920=−2.0×Ccrit×0.00831×300.15-0.920 = -2.0 \times C_{\text{crit}} \times 0.00831 \times 300.15.

  2. Multiply the constants on the right side: 2.0×0.00831×300.15=4.9884932.0 \times 0.00831 \times 300.15 = 4.988493.

  3. Solve for CcritC_{\text{crit}}: Ccrit=0.9204.988493≈0.1844 MC_{\text{crit}} = \frac{0.920}{4.988493} \approx 0.1844\text{ M}.

Final answer

Ccrit=0.184 MC_{\text{crit}} = 0.184\text{ M}

NEXT STEPS
Final Takeaways from Your Teacher
  • Double-check the unit of temperature whenever applying gas-law-derived formulas like Ψs=−iCRT\Psi_s = -iCRT or PV=nRTPV = nRT.

  • Practice dimensional analysis by writing out units explicitly alongside numbers during substitution.

OverviewACEpath Teacher's Diagnosis

03 The student multiplies the cell water potential by the ionization factor i instead of dividing by it when solving for concentration.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Ψcell=−0.920 MPa  ⟹  Ψsol=−iCRT=−0.920 MPa\Psi_{\text{cell}} = -0.920\text{ MPa} \implies \Psi_{\text{sol}} = -iCRT = -0.920\text{ MPa}

  2. Step 2

    C=0.920×2.00.00831×300.15C = \frac{0.920 \times 2.0}{0.00831 \times 300.15}

    Correct

    C=0.920iRT=0.9202.0×0.00831×300.15C = \frac{0.920}{i R T} = \frac{0.920}{2.0 \times 0.00831 \times 300.15}

    Because ii multiplies CC in the product iCRT=0.920 MPaiCRT = 0.920\text{ MPa}, solving for CC requires dividing both sides by ii, placing i=2.0i = 2.0 in the denominator rather than the numerator.

  3. Step 3

    C=1.842.494=0.738 MC = \frac{1.84}{2.494} = 0.738\text{ M}

    Correct

    C=0.9204.9885≈0.184 MC = \frac{0.920}{4.9885} \approx 0.184\text{ M}

    Your arithmetic was carried out correctly from your setup, but the final value was four times too large due to multiplying by ii instead of dividing by it.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recognized that a flaccid cell has zero turgor pressure, making Ψcell=Ψs\Psi_{\text{cell}} = \Psi_s.

You set up the equilibrium boundary condition accurately by equating Ψsol\Psi_{\text{sol}} to Ψcell\Psi_{\text{cell}}.

You used the correct values for the gas constant RR, temperature TT, and ionization factor ii.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Variable isolation error with ionization factor

You accidentally placed the ionization factor ii into the numerator when rearranging −iCRT=−0.920-iCRT = -0.920.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

In the van 't Hoff relation Ψs=−iCRT\Psi_s = -iCRT, the factors ii, CC, RR, and TT are all multiplied together. When isolating one factor such as concentration CC, every other factor in the product must move to the denominator (C=−Ψs/(iRT)C = -\Psi_s / (iRT)).

REASONING PATH
Your ACEpath teacher’s suggested approach
Isolating a factor from a product
  • If A=i⋅C⋅R⋅TA = i \cdot C \cdot R \cdot T, then C=Ai⋅R⋅TC = \frac{A}{i \cdot R \cdot T}.

  • Write out the symbolic division step C=∣Ψs∣iRTC = \frac{|\Psi_s|}{i R T} before plugging in numerical values.

Biological sense check on dissociation
  • Because KNOX3\ce{KNO3} dissociates into 2 particles (i=2i=2), each mole of solute creates twice the osmotic effect, so you need half the molar concentration of an undissociated solute to reach the same osmotic potential.

  • Check whether your calculated concentration is smaller than it would be for an undissociated solute (i=1i=1); multiplying by ii makes the required concentration artificially larger.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set up the rearranged equation: C=0.920 MPaiRTC = \frac{0.920\text{ MPa}}{i R T}

  2. Substitute the numerical values: C=0.920 MPa2.0×0.00831 L⋅MPa/(mol⋅K)×300.15 KC = \frac{0.920\text{ MPa}}{2.0 \times 0.00831\text{ L}\cdot\text{MPa}/(\text{mol}\cdot\text{K}) \times 300.15\text{ K}}

  3. Evaluate the denominator: 2.0×0.00831×300.15=4.9885 L⋅MPa/mol2.0 \times 0.00831 \times 300.15 = 4.9885\text{ L}\cdot\text{MPa}/\text{mol}

  4. Divide to find CC: C=0.9204.9885≈0.1844 MC = \frac{0.920}{4.9885} \approx 0.1844\text{ M}

Final answer

Ccrit=0.184 MC_{\text{crit}} = 0.184\text{ M}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice isolating variables symbolically before inserting numbers to avoid numerator/denominator placement slips.

  • Use an intuitive reality check: solutes with i>1i > 1 produce more particles per mole, so a lower molar concentration is needed to achieve a given osmotic potential.

Lock it in

Similar question

01

A flaccid plant cell with Ψs=−0.750 MPa\Psi_s = -0.750\text{ MPa} and Ψp=0 MPa\Psi_p = 0\text{ MPa} is placed in an open beaker of sucrose solution (i=1.0i = 1.0) at 20∘C20^\circ\text{C} (293.15 K293.15\text{ K}, R=0.00831 L⋅MPa/(mol⋅K)R = 0.00831\text{ L}\cdot\text{MPa}/(\text{mol}\cdot\text{K})). Calculate the critical molar concentration of sucrose at which net water movement is zero. Round to three significant figures.

Answer

Ccrit=0.308 MC_{\text{crit}} = 0.308\text{ M}. At dynamic equilibrium, Ψcell=Ψsol\Psi_{\text{cell}} = \Psi_{\text{sol}}, so −0.750=−(1.0)C(0.00831)(293.15)-0.750 = -(1.0) C (0.00831)(293.15). Solving gives C=0.7502.436≈0.308 MC = \frac{0.750}{2.436} \approx 0.308\text{ M}.

02

A plant cell with Ψs=−0.800 MPa\Psi_s = -0.800\text{ MPa} and a positive turgor pressure of Ψp=0.300 MPa\Psi_p = 0.300\text{ MPa} is placed into an open aqueous solution of calcium chloride (CaClX2\ce{CaCl2}, i=3.0i = 3.0) at 25∘C25^\circ\text{C} (298.15 K298.15\text{ K}, R=0.00831 L⋅MPa/(mol⋅K)R = 0.00831\text{ L}\cdot\text{MPa}/(\text{mol}\cdot\text{K})). Find the critical concentration of CaClX2\ce{CaCl2} that creates an isotonic boundary where no water enters or leaves. Round to three significant figures.

Answer

Ccrit=0.0673 MC_{\text{crit}} = 0.0673\text{ M}. Total cell potential is Ψcell=−0.800+0.300=−0.500 MPa\Psi_{\text{cell}} = -0.800 + 0.300 = -0.500\text{ MPa}. For the open beaker, Ψsol=−iCRT=−(3.0)C(0.00831)(298.15)=−7.427C\Psi_{\text{sol}} = -iCRT = -(3.0) C (0.00831)(298.15) = -7.427 C. Equating Ψcell=Ψsol\Psi_{\text{cell}} = \Psi_{\text{sol}} gives C=0.5007.427≈0.0673 MC = \frac{0.500}{7.427} \approx 0.0673\text{ M}.

03

An open solution of sodium sulfate (NaX2SOX4\ce{Na2SO4}, i=3.0i = 3.0) has a solute potential of −1.20 MPa-1.20\text{ MPa} at 27∘C27^\circ\text{C} (300.15 K300.15\text{ K}). A partially turgid root cell with an internal solute potential Ψs=−1.50 MPa\Psi_s = -1.50\text{ MPa} is immersed in this solution. What is the minimum turgor pressure (Ψp\Psi_p) the cell must maintain to prevent water from entering the cell from the solution? Round to two decimal places.

Answer

Ψp=0.30 MPa\Psi_p = 0.30\text{ MPa}. To prevent net water uptake into the cell, the cell's water potential must be less than or equal to the solution's potential (Ψcell≥Ψsol\Psi_{\text{cell}} \ge \Psi_{\text{sol}}). At the threshold, Ψcell=Ψs+Ψp=Ψsol=−1.20 MPa\Psi_{\text{cell}} = \Psi_s + \Psi_p = \Psi_{\text{sol}} = -1.20\text{ MPa}. Substituting Ψs=−1.50 MPa\Psi_s = -1.50\text{ MPa} yields −1.50+Ψp=−1.20  ⟹  Ψp=0.30 MPa-1.50 + \Psi_p = -1.20 \implies \Psi_p = 0.30\text{ MPa}.

Loading workspace…