Resources

An undergraduate student measures xylem sap under tension using a Scholander pressure chamber. The balancing air pressure required to force water back to the cut stem surface is recorded as +1.45 MPa+1.45\text{ MPa}, meaning the hydrostatic xylem pressure potential is negative: Ψp=−1.45 MPa\Psi_p = -1.45\text{ MPa}. The solute potential of the xylem sap is measured as Ψs=−0.08 MPa\Psi_s = -0.08\text{ MPa}. Meanwhile, an adjacent cortex cell has Ψs=−0.95 MPa\Psi_s = -0.95\text{ MPa} and Ψp=+0.30 MPa\Psi_p = +0.30\text{ MPa}. Avoiding the common sign-convention error where tension is treated as positive pressure, calculate the total water potential of the xylem vessel (Ψxylem\Psi_{\text{xylem}}), the total water potential of the cortex cell (Ψcortex\Psi_{\text{cortex}}), and state the true thermodynamic direction of spontaneous water movement between them.

Answer and steps

Final answer

Ψxylem=−1.53 MPa\Psi_{\text{xylem}} = -1.53\text{ MPa}; Ψcortex=−0.65 MPa\Psi_{\text{cortex}} = -0.65\text{ MPa}; Water moves from the cortex cell into the xylem vessel (from higher Ψ\Psi of −0.65 MPa-0.65\text{ MPa} to lower Ψ\Psi of −1.53 MPa-1.53\text{ MPa}).

Steps

01

Water Potential Formula

Total water potential (Ψ\Psi) represents the free energy of water per unit volume and is calculated as the sum of solute potential (Ψs\Psi_s) and pressure potential (Ψp\Psi_p):

Ψ=Ψs+Ψp\Psi = \Psi_s + \Psi_p

02

Calculate Ψxylem\Psi_{\text{xylem}}

In transpiring xylem vessels, water is pulled under physical tension (negative hydrostatic pressure).

  • Solute potential: Ψs=−0.08 MPa\Psi_s = -0.08\text{ MPa}
  • Pressure potential: Ψp=−1.45 MPa\Psi_p = -1.45\text{ MPa}

Ψxylem=−0.08 MPa+(−1.45 MPa)=−1.53 MPa\Psi_{\text{xylem}} = -0.08\text{ MPa} + (-1.45\text{ MPa}) = -1.53\text{ MPa}

Common Pitfall: A Scholander pressure bomb applies a positive external balancing pressure (here, +1.45 MPa+1.45\text{ MPa}) to counteract negative internal tension. Forgetting to convert this balancing reading back to a negative value (Ψp=−1.45 MPa\Psi_p = -1.45\text{ MPa}) leads to an incorrect positive hydrostatic pressure for xylem sap.

03

Calculate Ψcortex\Psi_{\text{cortex}}

Living plant cells maintain positive turgor pressure (Ψp>0\Psi_p > 0) exerted by the protoplast against the rigid cell wall:

  • Solute potential: Ψs=−0.95 MPa\Psi_s = -0.95\text{ MPa}
  • Pressure potential (turgor): Ψp=+0.30 MPa\Psi_p = +0.30\text{ MPa}

Ψcortex=−0.95 MPa+(+0.30 MPa)=−0.65 MPa\Psi_{\text{cortex}} = -0.95\text{ MPa} + (+0.30\text{ MPa}) = -0.65\text{ MPa}

04

Determine Direction of Spontaneous Water Movement

Thermodynamically, water flows spontaneously from a region of higher (less negative) water potential to a region of lower (more negative) water potential:

Ψcortex=−0.65 MPa>Ψxylem=−1.53 MPa\Psi_{\text{cortex}} = -0.65\text{ MPa} > \Psi_{\text{xylem}} = -1.53\text{ MPa}

Therefore, water spontaneously moves from the cortex cell into the xylem vessel.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student treats xylem tension as positive hydrostatic pressure potential (+1.45 MPa) instead of negative pressure potential.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Ψxylem=−0.08 MPa+1.45 MPa  ⟹  Ψxylem=1.37 MPa\Psi_{\text{xylem}} = -0.08\text{ MPa} + 1.45\text{ MPa} \implies \Psi_{\text{xylem}} = 1.37\text{ MPa}

    Correct

    Ψxylem=Ψs+Ψp=−0.08 MPa+(−1.45 MPa)=−1.53 MPa\Psi_{\text{xylem}} = \Psi_s + \Psi_p = -0.08\text{ MPa} + (-1.45\text{ MPa}) = -1.53\text{ MPa}

    You substituted the balancing pressure as a positive pressure potential (+1.45 MPa+1.45\text{ MPa}). Because the sap in transpiring xylem is under physical tension (suction/negative hydrostatic pressure), the pressure potential must be negative: Ψp=−1.45 MPa\Psi_p = -1.45\text{ MPa}.

  2. Step 2

    Ψcortex=−0.95 MPa+0.30 MPa  ⟹  Ψcortex=−0.65 MPa\Psi_{\text{cortex}} = -0.95\text{ MPa} + 0.30\text{ MPa} \implies \Psi_{\text{cortex}} = -0.65\text{ MPa}

  3. Step 3

    Water moves spontaneously from cortex cell to xylem vessel

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recalled the formula for total water potential as the sum of solute and pressure potentials.

You correctly calculated the cortex water potential using negative solute potential and positive turgor pressure.

You correctly identified the physiological direction of water movement from the cortex into the xylem.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Sign convention error with negative hydrostatic pressure (tension)

You used the positive value of the chamber balancing pressure (+1.45 MPa+1.45\text{ MPa}) directly as Ψp\Psi_p instead of converting it to negative tension (−1.45 MPa-1.45\text{ MPa}).

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the external positive pressure applied by a Scholander pressure chamber to balance the sap with the internal negative hydrostatic pressure (tension) naturally present inside the xylem vessel.

REASONING PATH
Your ACEpath teacher’s suggested approach
Xylem Pressure Potential Sign
  • Water under tension in transpiring xylem vessels always has a negative pressure potential (Psip<0\\Psi_p < 0).

  • Whenever a problem specifies tension or a Scholander balancing pressure PbalanceP_{\text{balance}}, assign Ψp=−Pbalance\Psi_p = -P_{\text{balance}}.

Direction of Spontaneous Water Flow
  • Water moves spontaneously from regions of higher (less negative) water potential to lower (more negative) water potential.

  • Compare the total values: spontaneous movement flows from the greater algebraic value of Ψ\Psi toward the smaller algebraic value.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Assign Ψp=−1.45 MPa\Psi_p = -1.45\text{ MPa} for the xylem vessel because xylem sap is under tension.

  2. Compute Ψxylem=Ψs+Ψp=−0.08 MPa+(−1.45 MPa)=−1.53 MPa\Psi_{\text{xylem}} = \Psi_s + \Psi_p = -0.08\text{ MPa} + (-1.45\text{ MPa}) = -1.53\text{ MPa}.

  3. Compare Ψcortex=−0.65 MPa\Psi_{\text{cortex}} = -0.65\text{ MPa} with Ψxylem=−1.53 MPa\Psi_{\text{xylem}} = -1.53\text{ MPa}. Since −0.65>−1.53-0.65 > -1.53, water flows spontaneously down the water potential gradient from the cortex into the xylem vessel.

Final answer

Ψxylem=−1.53 MPa\Psi_{\text{xylem}} = -1.53\text{ MPa}, Ψcortex=−0.65 MPa\Psi_{\text{cortex}} = -0.65\text{ MPa}; spontaneous water movement is from the cortex cell into the xylem vessel.

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice distinguishing positive turgor pressure in living protoplasts (Ψp>0\Psi_p > 0) from negative tension in dead conducting xylem elements (Ψp<0\Psi_p < 0).

  • Check that your calculated Ψ\Psi values are consistent with the direction of spontaneous flow before finalizing your response.

OverviewACEpath Teacher's Diagnosis

02 The student misremembers the direction of osmosis, assuming water flows spontaneously from lower (more negative) to higher water potential.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Ψxylem=−0.08 MPa+(−1.45 MPa)  ⟹  Ψxylem=−1.53 MPa\Psi_{\text{xylem}} = -0.08\text{ MPa} + (-1.45\text{ MPa}) \implies \Psi_{\text{xylem}} = -1.53\text{ MPa}

  2. Step 2

    Ψcortex=−0.95 MPa+0.30 MPa=−0.65 MPa\Psi_{\text{cortex}} = -0.95\text{ MPa} + 0.30\text{ MPa} = -0.65\text{ MPa}

  3. Step 3

    Water moves spontaneously from xylem vessel to cortex cell

    Correct

    Water moves spontaneously from the cortex cell into the xylem vessel

    Water flows spontaneously down a water potential gradient from higher (less negative) to lower (more negative) water potential. Because −0.65 MPa>−1.53 MPa-0.65\text{ MPa} > -1.53\text{ MPa}, water flows from the cortex into the xylem vessel.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the equation Ψ=Ψs+Ψp\Psi = \Psi_s + \Psi_p for both compartments.

You properly handled the sign convention for hydrostatic tension in the xylem.

You accurately calculated both numerical values: Ψxylem=−1.53 MPa\Psi_{\text{xylem}} = -1.53\text{ MPa} and Ψcortex=−0.65 MPa\Psi_{\text{cortex}} = -0.65\text{ MPa}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Direction of Water Potential Gradient Reversed

none

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated water as moving toward the less negative water potential instead of remembering that water spontaneously moves from higher (less negative) Ψ\Psi toward lower (more negative) Ψ\Psi.

REASONING PATH
Your ACEpath teacher’s suggested approach
Thermodynamic Flow Rule
  • Water spontaneously flows from a region of higher (less negative) Ψ\Psi to a region of lower (more negative) Ψ\Psi.

  • Compare the two values on a number line: −0.65 MPa-0.65\text{ MPa} is greater than −1.53 MPa-1.53\text{ MPa}, so the arrow of flow points from the cortex to the xylem.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Compare the calculated potentials: Ψcortex=−0.65 MPa\Psi_{\text{cortex}} = -0.65\text{ MPa} and Ψxylem=−1.53 MPa\Psi_{\text{xylem}} = -1.53\text{ MPa}.

  2. Notice that −0.65>−1.53-0.65 > -1.53, meaning Ψcortex>Ψxylem\Psi_{\text{cortex}} > \Psi_{\text{xylem}}.

  3. Apply the rule of spontaneous flow: water moves from higher Ψ\Psi to lower Ψ\Psi.

Final answer

Ψxylem=−1.53 MPa\Psi_{\text{xylem}} = -1.53\text{ MPa}; Ψcortex=−0.65 MPa\Psi_{\text{cortex}} = -0.65\text{ MPa}; Water moves spontaneously from the cortex cell into the xylem vessel.

NEXT STEPS
Final Takeaways from Your Teacher
  • Draw a vertical number line for water potential whenever comparing compartments to easily see which value is higher.

  • Practice water movement questions involving negative decimals to build confidence in identifying the gradient direction.

OverviewACEpath Teacher's Diagnosis

03 The student subtracts pressure potential from solute potential (Ψ = Ψ_s - Ψ_p) instead of adding them.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Ψxylem=−0.08 MPa−(−1.45 MPa)  ⟹  Ψxylem=1.37 MPa\Psi_{\text{xylem}} = -0.08\text{ MPa} - (-1.45\text{ MPa}) \implies \Psi_{\text{xylem}} = 1.37\text{ MPa}

    Correct

    Ψxylem=Ψs+Ψp=−0.08 MPa+(−1.45 MPa)=−1.53 MPa\Psi_{\text{xylem}} = \Psi_s + \Psi_p = -0.08\text{ MPa} + (-1.45\text{ MPa}) = -1.53\text{ MPa}

    You subtracted the pressure potential rather than adding it. Total water potential is the algebraic sum of solute potential and pressure potential, Ψ=Ψs+Ψp\Psi = \Psi_s + \Psi_p.

  2. Step 2

    Ψcortex=−0.95 MPa−0.30 MPa  ⟹  Ψcortex=−1.25 MPa\Psi_{\text{cortex}} = -0.95\text{ MPa} - 0.30\text{ MPa} \implies \Psi_{\text{cortex}} = -1.25\text{ MPa}

    Correct

    Ψcortex=Ψs+Ψp=−0.95 MPa+(+0.30 MPa)=−0.65 MPa\Psi_{\text{cortex}} = \Psi_s + \Psi_p = -0.95\text{ MPa} + (+0.30\text{ MPa}) = -0.65\text{ MPa}

    You subtracted positive turgor pressure rather than adding it to the solute potential.

  3. Step 3

    Water moves spontaneously from xylem vessel to cortex cell

    Correct

    Water moves spontaneously from cortex cell to xylem vessel (from Ψ=−0.65 MPa\Psi = -0.65\text{ MPa} to Ψ=−1.53 MPa\Psi = -1.53\text{ MPa})

    Your flow direction correctly followed your calculated values (from higher to lower potential), but because the calculated water potentials were incorrect, the resulting direction is reversed.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recognized that tension corresponds to a negative pressure potential (Ψp=−1.45 MPa\Psi_p = -1.45\text{ MPa}).

You correctly applied the thermodynamic rule that water flows spontaneously from higher to lower water potential.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Formula error: subtracted pressure potential instead of adding

No, this is a conceptual formula error where Ψ=Ψs−Ψp\Psi = \Psi_s - \Psi_p was applied consistently across both calculations.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated pressure potential as a value to be subtracted from solute potential rather than remembering that total water potential is an additive thermodynamic sum of free energy components: Ψ=Ψs+Ψp\Psi = \Psi_s + \Psi_p.

REASONING PATH
Your ACEpath teacher’s suggested approach
Water Potential Equation
  • Total water potential is always the sum of all components: Ψ=Ψs+Ψp+Ψg+…\Psi = \Psi_s + \Psi_p + \Psi_g + \dots

  • Write down Ψ=Ψs+Ψp\Psi = \Psi_s + \Psi_p with an addition sign before substituting numerical values with their respective positive or negative signs.

Sign Sense-Check
  • Tension pulls water and decreases free energy (making Ψ\Psi more negative), while turgor pushes water and increases free energy (making Ψ\Psi less negative).

  • Check that adding negative tension drives total Ψ\Psi down, and adding positive turgor drives total Ψ\Psi up.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Compute xylem water potential: Ψxylem=−0.08 MPa+(−1.45 MPa)=−1.53 MPa\Psi_{\text{xylem}} = -0.08\text{ MPa} + (-1.45\text{ MPa}) = -1.53\text{ MPa}.

  2. Compute cortex water potential: Ψcortex=−0.95 MPa+0.30 MPa=−0.65 MPa\Psi_{\text{cortex}} = -0.95\text{ MPa} + 0.30\text{ MPa} = -0.65\text{ MPa}.

  3. Compare potentials: Since Ψcortex=−0.65 MPa>Ψxylem=−1.53 MPa\Psi_{\text{cortex}} = -0.65\text{ MPa} > \Psi_{\text{xylem}} = -1.53\text{ MPa}, water moves down the potential gradient.

Final answer

Ψxylem=−1.53 MPa\Psi_{\text{xylem}} = -1.53\text{ MPa}; Ψcortex=−0.65 MPa\Psi_{\text{cortex}} = -0.65\text{ MPa}; Water moves spontaneously from the cortex cell into the xylem vessel.

NEXT STEPS
Final Takeaways from Your Teacher
  • Memorize the core definition of water potential as an additive sum: Ψ=Ψs+Ψp\Psi = \Psi_s + \Psi_p.

  • Practice sign handling by substituting values inside parentheses with their signs intact, e.g., Ψs+(Ψp)\Psi_s + (\Psi_p).

Lock it in

Similar question

01

A leaf xylem vessel has a solute potential of Ψs=−0.05 MPa\Psi_s = -0.05\text{ MPa} and is under a tension of 0.80 MPa0.80\text{ MPa}. Calculate its total water potential Ψleaf\Psi_{\text{leaf}}.

Answer

Ψleaf=−0.85 MPa\Psi_{\text{leaf}} = -0.85\text{ MPa}. Because tension represents negative pressure, Ψp=−0.80 MPa\Psi_p = -0.80\text{ MPa}. Total water potential is Ψ=Ψs+Ψp=−0.05 MPa+(−0.80 MPa)=−0.85 MPa\Psi = \Psi_s + \Psi_p = -0.05\text{ MPa} + (-0.80\text{ MPa}) = -0.85\text{ MPa}.

02

A root hair cell has Ψs=−0.70 MPa\Psi_s = -0.70\text{ MPa} and Ψp=+0.25 MPa\Psi_p = +0.25\text{ MPa}. The surrounding moist soil has Ψs=−0.05 MPa\Psi_s = -0.05\text{ MPa} and Ψp=−0.10 MPa\Psi_p = -0.10\text{ MPa}. Calculate the total water potential for both, and determine whether water enters the root hair cell.

Answer

Ψsoil=−0.15 MPa\Psi_{\text{soil}} = -0.15\text{ MPa}, Ψcell=−0.45 MPa\Psi_{\text{cell}} = -0.45\text{ MPa}; water enters the root hair cell. Calculation: Ψsoil=−0.05+(−0.10)=−0.15 MPa\Psi_{\text{soil}} = -0.05 + (-0.10) = -0.15\text{ MPa}; Ψcell=−0.70+0.25=−0.45 MPa\Psi_{\text{cell}} = -0.70 + 0.25 = -0.45\text{ MPa}. Because Ψsoil(−0.15 MPa)>Ψcell(−0.45 MPa)\Psi_{\text{soil}} (-0.15\text{ MPa}) > \Psi_{\text{cell}} (-0.45\text{ MPa}), water moves spontaneously into the root hair.

03

A Scholander pressure bomb measures a balancing pressure of +2.00 MPa+2.00\text{ MPa} on a twig whose xylem sap has Ψs=−0.12 MPa\Psi_s = -0.12\text{ MPa}. An adjacent mesophyll cell has Ψs=−1.80 MPa\Psi_s = -1.80\text{ MPa}. What minimum turgor pressure Ψp\Psi_p must the mesophyll cell maintain to prevent water from being withdrawn into the xylem?

Answer

Minimum Ψp>−0.32 MPa\Psi_p > -0.32\text{ MPa} (practically Ψp≥0 MPa\Psi_p \ge 0\text{ MPa} since living cells maintain Ψp≥0\Psi_p \ge 0, but strictly Ψmesophyll≤Ψxylem\Psi_{\text{mesophyll}} \le \Psi_{\text{xylem}} for water withdrawal). Specifically, Ψxylem=−0.12+(−2.00)=−2.12 MPa\Psi_{\text{xylem}} = -0.12 + (-2.00) = -2.12\text{ MPa}. To prevent withdrawal, Ψmesophyll≥−2.12 MPa  ⟹  −1.80+Ψp≥−2.12  ⟹  Ψp≥−0.32 MPa\Psi_{\text{mesophyll}} \ge -2.12\text{ MPa} \implies -1.80 + \Psi_p \ge -2.12 \implies \Psi_p \ge -0.32\text{ MPa}. Since turgor pressure cannot be negative in living cells, any positive turgor pressure (even Ψp=0 MPa\Psi_p = 0\text{ MPa}) ensures Ψmesophyll≥−1.80 MPa>−2.12 MPa\Psi_{\text{mesophyll}} \ge -1.80\text{ MPa} > -2.12\text{ MPa}, completely preventing withdrawal.

Loading workspace…