Resources

An evolutionary biologist uses molecular clock data to date the divergence between two lizard sister species (Anolis cristatellus and Anolis gundlachi). Sequencing of a neutral mitochondrial cytochrome bb gene (1,200 bp1{,}200\text{ bp} in length) reveals 4848 total nucleotide substitutions between the two species. Calibration from fossil outgroups establishes the neutral mutation rate of this locus at 2.0×10−8 substitutions per site per year2.0 \times 10^{-8}\text{ substitutions per site per year}. Rather than estimating the total substitutions, calculate the divergence time TT (in millions of years, Mya\text{Mya}) between these two lineages, given that divergence time satisfies D=2μTD = 2\mu T, where DD is the sequence divergence per site and μ\mu is the mutation rate per site per year.

Answer and steps

Final answer

T=1.00 MyaT = 1.00\text{ Mya} (or 1.00×106 years1.00 \times 10^6\text{ years})

Steps

01

Calculate the sequence divergence per site (DD)

Sequence divergence (DD) represents the proportion of nucleotide positions that differ between the two homologous sequences:

D=Total observed substitutionsTotal sequence length in base pairsD = \frac{\text{Total observed substitutions}}{\text{Total sequence length in base pairs}}

Substitute the given values:

D=481,200=0.04 substitutions per siteD = \frac{48}{1{,}200} = 0.04\text{ substitutions per site}


02

Relate sequence divergence to divergence time using the molecular clock equation

The relationship between sequence divergence (DD), mutation rate (μ\mu), and divergence time (TT) is given by:

D=2μTD = 2\mu T

Why is there a factor of 22?
Since diverging from their most recent common ancestor (MRCA), mutations have accumulated independently along both daughter lineages for a duration of TT. Therefore, the total evolutionary time across both branches is 2T2T.

Rearranging the formula to solve for time (TT):

T=D2μT = \frac{D}{2\mu}


03

Compute the divergence time (TT)

Substitute D=0.04D = 0.04 and μ=2.0×10−8 substitutions per site per year\mu = 2.0 \times 10^{-8}\text{ substitutions per site per year}:

T=0.042⋅(2.0×10−8 yr−1)=0.044.0×10−8 yr−1=1.00×106 yearsT = \frac{0.04}{2 \cdot (2.0 \times 10^{-8}\text{ yr}^{-1})} = \frac{0.04}{4.0 \times 10^{-8}\text{ yr}^{-1}} = 1.00 \times 10^6\text{ years}


04

Express the answer in millions of years (Mya\text{Mya})

Convert years into millions of years (Mya\text{Mya}):

T=1.00×106 years106 years/million years=1.00 MyaT = \frac{1.00 \times 10^6\text{ years}}{10^6\text{ years/million years}} = 1.00\text{ Mya}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets that sequence divergence reflects mutations accumulating along both lineages and omits the factor of 2 in the denominator, using T = D / μ.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    D=481200=0.04D = \frac{48}{1200} = 0.04

  2. Step 2

    T=Dμ=0.042.0×10−8T = \frac{D}{\mu} = \frac{0.04}{2.0 \times 10^{-8}}

    Correct

    T=D2μ=0.042⋅(2.0×10−8)T = \frac{D}{2\mu} = \frac{0.04}{2 \cdot (2.0 \times 10^{-8})}

    You used T=DμT = \frac{D}{\mu} instead of the molecular clock equation provided in the problem, D=2μTD = 2\mu T. Because mutations accumulate independently along both lineages since divergence, the total branch time separating the two species is 2T2T.

  3. Step 3

    T=2,000,000 years=2.0 MyaT = 2{,}000{,}000\text{ years} = 2.0\text{ Mya}

    Correct

    T=1,000,000 years=1.00 MyaT = 1{,}000{,}000\text{ years} = 1.00\text{ Mya}

    Your arithmetic and unit conversion from years to Mya\text{Mya} were executed correctly, but the result inherits the missing factor of 22 from the previous step.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the sequence divergence per site by dividing observed substitutions by sequence length.

You accurately converted elapsed years into millions of years (Mya\text{Mya}).

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omission of two-lineage factor in molecular clock equation

You omitted the factor of 22 in the denominator when rearranging D=2μTD = 2\mu T for TT.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You overlooked that pairwise sequence divergence (DD) reflects mutations accumulating independently along two separate evolutionary branches originating from the most recent common ancestor, requiring the denominator to account for both branches (2μ2\mu).

REASONING PATH
Your ACEpath teacher’s suggested approach
Two-Lineage Accumulation Rule
  • Pairwise divergence between sister taxa is D=2μTD = 2\mu T, because mutations accumulate on both branches for time TT.

  • Always verify whether a given rate μ\mu applies to a single lineage (requiring D=2μTD = 2\mu T) or already represents pairwise divergence rate.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Rearrange D=2μTD = 2\mu T to isolate TT: T=D2μT = \frac{D}{2\mu}

  2. Substitute D=0.04D = 0.04 and μ=2.0×10−8 yr−1\mu = 2.0 \times 10^{-8}\text{ yr}^{-1}: T=0.042⋅(2.0×10−8)=0.044.0×10−8=1.00×106 yearsT = \frac{0.04}{2 \cdot (2.0 \times 10^{-8})} = \frac{0.04}{4.0 \times 10^{-8}} = 1.00 \times 10^6\text{ years}

  3. Convert to millions of years: T=1.00×106 years106 yr/Mya=1.00 MyaT = \frac{1.00 \times 10^6\text{ years}}{10^6\text{ yr/Mya}} = 1.00\text{ Mya}

Final answer

T=1.00 MyaT = 1.00\text{ Mya}

NEXT STEPS
Final Takeaways from Your Teacher
  • When setting up molecular clock problems, draw a simple bifurcating tree with two branches of length TT to remind yourself of the factor of 22.

  • Check whether the problem asks for the divergence time from the common ancestor (TT) or the total branch length between taxa (2T2T).

OverviewACEpath Teacher's Diagnosis

02 The student uses the total number of substitutions instead of calculating divergence per site, substituting D = 48 directly into the molecular clock formula.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    D=48D = 48

    Correct

    D=481,200=0.04D = \frac{48}{1{,}200} = 0.04

    The variable DD in the molecular clock equation represents sequence divergence per site (the proportion of differing nucleotide positions), not the total count of observed substitutions. Because the gene is 1,200 bp1{,}200\text{ bp} long, you need to divide the 4848 substitutions by 1,2001{,}200 to get D=0.04D = 0.04.

  2. Step 2

    T=D2μ=482×2.0×10−8T = \frac{D}{2\mu} = \frac{48}{2 \times 2.0 \times 10^{-8}}

    Correct

    T=D2μ=0.042×(2.0×10−8)T = \frac{D}{2\mu} = \frac{0.04}{2 \times (2.0 \times 10^{-8})}

    Your algebraic rearrangement T=D2μT = \frac{D}{2\mu} is completely correct, but substituting D=48D = 48 carried your earlier error into this step.

  3. Step 3

    T=484.0×10−8=1.2×109 years=1200 MyaT = \frac{48}{4.0 \times 10^{-8}} = 1.2 \times 10^9\text{ years} = 1200\text{ Mya}

    Correct

    T=0.044.0×10−8=1.00×106 years=1.00 MyaT = \frac{0.04}{4.0 \times 10^{-8}} = 1.00 \times 10^6\text{ years} = 1.00\text{ Mya}

    You evaluated the arithmetic and converted years to Mya\text{Mya} accurately for the numbers you had, but the final value was inflated by a factor of 1,2001{,}200 due to the unnormalized divergence value.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified and applied the molecular clock formula D=2μTD = 2\mu T.

You correctly rearranged the equation to solve for divergence time T=D2μT = \frac{D}{2\mu}.

You handled the scientific notation arithmetic and the unit conversion to millions of years accurately.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Unit/Per-Site Normalization Error

You substituted the raw nucleotide difference count directly for DD without normalizing by total sequence length.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing absolute difference counts with per-site divergence rates. Because the mutation rate μ\mu is expressed per site per year, the divergence parameter DD must also be on a per-site basis (D=substitutionstotal sitesD = \frac{\text{substitutions}}{\text{total sites}}) to keep the dimensional units balanced.

REASONING PATH
Your ACEpath teacher’s suggested approach
Check the units of $\mu$ and $D$
  • Whenever a mutation rate μ\mu is given in substitutions per site per year\text{substitutions per site per year}, the divergence DD must be substitutions per site\text{substitutions per site}.

  • Calculate D=observed substitutionsalignment length in bpD = \frac{\text{observed substitutions}}{\text{alignment length in bp}} before substituting into D=2μTD = 2\mu T.

Perform a biological plausibility check
  • Sister species of extant lizards typically diverged within the Cenozoic era (under 66 Mya66\text{ Mya}).

  • If your calculated divergence time is 1,200 Mya1{,}200\text{ Mya} (which predates multicellular animals), pause and check if you forgot to divide by the sequence length.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Normalize the observed substitutions by the sequence length: D=481,200=0.04 substitutions per siteD = \frac{48}{1{,}200} = 0.04\text{ substitutions per site}.

  2. Substitute D=0.04D = 0.04 into the rearranged molecular clock formula: T=0.042×(2.0×10−8) yr−1=0.044.0×10−8 yr−1T = \frac{0.04}{2 \times (2.0 \times 10^{-8})\text{ yr}^{-1}} = \frac{0.04}{4.0 \times 10^{-8}\text{ yr}^{-1}}.

  3. Calculate the divergence time in years: T=1.00×106 yearsT = 1.00 \times 10^6\text{ years}.

  4. Convert years to millions of years: T=1.00×106 yr106 yr/My=1.00 MyaT = \frac{1.00 \times 10^6\text{ yr}}{10^6\text{ yr/My}} = 1.00\text{ Mya}.

Final answer

T=1.00 MyaT = 1.00\text{ Mya} (or 1.00×106 years1.00 \times 10^6\text{ years})

NEXT STEPS
Final Takeaways from Your Teacher
  • Write down the dimensional units for every variable before solving, verifying that 'per site' cancels out between DD and μ\mu.

  • Practice converting raw alignment differences into per-site genetic distance pp (or DD) before setting up molecular clock equations.

OverviewACEpath Teacher's Diagnosis

03 The student multiplies by 2 rather than dividing by 2 when rearranging the divergence equation, writing T = 2D / μ.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    D=481200=0.04D = \frac{48}{1200} = 0.04

  2. Step 2

    T=2Dμ=2×0.04(2.0×10−8)T = \frac{2D}{\mu} = \frac{2 \times 0.04}{(2.0 \times 10^{-8})}

    Correct

    T=D2μ=0.042×(2.0×10−8)T = \frac{D}{2\mu} = \frac{0.04}{2 \times (2.0 \times 10^{-8})}

    To isolate TT from D=2μTD = 2\mu T, you need to divide both sides by 2μ2\mu, which places the factor of 22 in the denominator: T=D2μT = \frac{D}{2\mu}.

  3. Step 3

    T=0.08(2.0×10−8)=4,000,000 years=4.0 MyaT = \frac{0.08}{(2.0 \times 10^{-8})} = 4{,}000{,}000\text{ years} = 4.0\text{ Mya}

    Correct

    T=0.044.0×10−8=1,000,000 years=1.00 MyaT = \frac{0.04}{4.0 \times 10^{-8}} = 1{,}000{,}000\text{ years} = 1.00\text{ Mya}

    Your arithmetic correctly followed your rearranged equation, but the final divergence time is 44 times too large because of the rearrangement error.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the sequence divergence per site (D=0.04D = 0.04).

You performed the arithmetic and scientific-notation calculations accurately according to your written formula.

You converted years into millions of years (Mya\text{Mya}) correctly.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Algebraic rearrangement error

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You moved the factor of 2 to the other side by multiplying rather than dividing, putting 2 in the numerator instead of the denominator.

REASONING PATH
Your ACEpath teacher’s suggested approach
Isolating variables with coefficients
  • When solving y=c⋅xy = c \cdot x for xx, divide both sides by the entire coefficient cc, yielding x=ycx = \frac{y}{c}.

  • Divide both sides of D=2μTD = 2\mu T by (2μ)(2\mu) together to get T=D2μT = \frac{D}{2\mu}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Rearrange D=2μTD = 2\mu T by dividing both sides by 2μ2\mu: T=D2μT = \frac{D}{2\mu}.

  2. Substitute D=0.04D = 0.04 and μ=2.0×10−8\mu = 2.0 \times 10^{-8}: T=0.042×(2.0×10−8)=0.044.0×10−8T = \frac{0.04}{2 \times (2.0 \times 10^{-8})} = \frac{0.04}{4.0 \times 10^{-8}}.

  3. Evaluate the quotient: T=1.00×106 years=1.00 MyaT = 1.00 \times 10^6\text{ years} = 1.00\text{ Mya}.

Final answer

T=1.00 MyaT = 1.00\text{ Mya} (or 1.00×106 years1.00 \times 10^6\text{ years})

NEXT STEPS
Final Takeaways from Your Teacher
  • Double-check that dividing both sides by a product puts all factors of that product in the denominator.

  • Remember the biological meaning: the observed divergence DD represents mutations across two diverging branches (2T2T), so divergence time TT must be smaller than Dμ\frac{D}{\mu}, not larger.

Lock it in

Similar question

01

Two species of rodents exhibit 3030 nucleotide differences across a 1,500 bp1{,}500\text{ bp} neutral pseudogene. The lineage-specific mutation rate is μ=1.25×10−8 substitutions/site/year\mu = 1.25 \times 10^{-8}\text{ substitutions/site/year}. Calculate the divergence time TT in millions of years (Mya\text{Mya}).

Answer

D=301,500=0.02D = \frac{30}{1{,}500} = 0.02. Using T=D2μ=0.022⋅(1.25×10−8)=8.0×105 years=0.80 MyaT = \frac{D}{2\mu} = \frac{0.02}{2 \cdot (1.25 \times 10^{-8})} = 8.0 \times 10^5\text{ years} = 0.80\text{ Mya}.

02

A pair of bird species diverged from a common ancestor 4.0 Mya4.0\text{ Mya}. An alignment of a 2,000 bp2{,}000\text{ bp} neutral nuclear intron shows 4848 substitutions between them. What is the mutation rate μ\mu in substitutions per site per year?

Answer

D=482,000=0.024D = \frac{48}{2{,}000} = 0.024. Rearranging D=2μTD = 2\mu T gives μ=D2T=0.0242⋅(4.0×106 yr)=3.0×10−9 substitutions per site per year\mu = \frac{D}{2T} = \frac{0.024}{2 \cdot (4.0 \times 10^6\text{ yr})} = 3.0 \times 10^{-9}\text{ substitutions per site per year}.

03

Two plant lineages separated 3.0 Mya3.0\text{ Mya} and have accumulated a sequence divergence of D=0.03D = 0.03. Lineage A evolved at rate μA=4.0×10−9 site−1yr−1\mu_A = 4.0 \times 10^{-9}\text{ site}^{-1}\text{yr}^{-1}. Assuming clock-like evolution along both branches but unequal rates, find the mutation rate μB\mu_B along lineage B.

Answer

Total divergence is D=(μA+μB)TD = (\mu_A + \mu_B)T. Thus μA+μB=DT=0.033.0×106=1.0×10−8\mu_A + \mu_B = \frac{D}{T} = \frac{0.03}{3.0 \times 10^6} = 1.0 \times 10^{-8}. Subtracting μA\mu_A: μB=1.0×10−8−4.0×10−9=6.0×10−9 substitutions per site per year\mu_B = 1.0 \times 10^{-8} - 4.0 \times 10^{-9} = 6.0 \times 10^{-9}\text{ substitutions per site per year}.

Loading workspace…