Resources

A 1.50 L1.50\text{ L} aqueous reaction vessel contains a starch polymer composed of 1,2001{,}200 glucose monomers (n=1,200n = 1{,}200). An amylase enzyme catalyzes the complete hydrolysis of this single polymer chain into individual glucose monomers (1,1991{,}199 molecules of H2O\text{H}_2\text{O} consumed). If the initial pH\text{pH} of the unbuffered solution is 7.007.00 at 25∘C25^\circ\text{C} ([H+]=[OH−]=1.00×10−7 M[\text{H}^+] = [\text{OH}^-] = 1.00 \times 10^{-7}\text{ M}), and 0.050%0.050\% of the consumed water molecules were supplied directly by the dissociation of hydronium and hydroxide ions in the water ionization equilibrium rather than neutral bulk water solvent, calculate the resulting hydronium ion concentration [H3O+][\text{H}_3\text{O}^+] and the final pH\text{pH} of the system.

Answer and steps

Final answer

[H3O+]=1.00×10−7 M[\text{H}_3\text{O}^+] = 1.00 \times 10^{-7}\text{ M}; pH=7.00\text{pH} = 7.00

Steps

01

Analyze the chemical nature of starch hydrolysis

Hydrolysis breaks covalent glycosidic bonds between monomers by adding the components of a water molecule (−H-\ce{H} and −OH-\ce{OH}): (CX6HX10OX5)n+(n−1)HX2O→nCX6HX12OX6\ce{(C6H10O5)}_n + (n - 1)\ce{H2O ->} n\ce{C6H12O6}

For a single polymer chain containing n=1,200n = 1{,}200 glucose units, complete hydrolysis cleaves 1,1991{,}199 glycosidic bonds and consumes exactly 1,1991{,}199 molecules of HX2O\ce{H2O}.

The resulting products are neutral glucose monomers (CX6HX12OX6\ce{C6H12O6}), which do not donate or accept protons in aqueous solution.

02

Compare the quantities at the molecular and molar scales

Calculate the quantity of water consumed in moles: Moles of HX2O consumed=1,199 molecules6.022×1023 molecules/mol≈1.99×10−21 mol\text{Moles of }\ce{H2O}\text{ consumed} = \frac{1{,}199\text{ molecules}}{6.022 \times 10^{23}\text{ molecules/mol}} \approx 1.99 \times 10^{-21}\text{ mol}

Now consider the initial quantity of hydronium ions in the 1.50 L1.50\text{ L} vessel at pH=7.00\text{pH} = 7.00: Moles of HX3OX+=[HX3OX+]×V=(1.00×10−7 mol/L)×1.50 L=1.50×10−7 mol\text{Moles of }\ce{H3O+} = [\ce{H3O+}] \times V = (1.00 \times 10^{-7}\text{ mol/L}) \times 1.50\text{ L} = 1.50 \times 10^{-7}\text{ mol}

The total number of HX3OX+\ce{H3O+} ions initially present is: NHX3OX+=(1.50×10−7 mol)×(6.022×1023 ions/mol)≈9.03×1016 ionsN_{\ce{H3O+}} = (1.50 \times 10^{-7}\text{ mol}) \times (6.022 \times 10^{23}\text{ ions/mol}) \approx 9.03 \times 10^{16}\text{ ions}

Even if ions from the autoionization of water (2 HX2O⇌HX3OX++OHX−\ce{2 H2O <=> H3O+ + OH-}) participate in the reaction mechanism, the entire hydrolysis of a single polymer molecule consumes only 1,1991{,}199 molecules of HX2O\ce{H2O} in total. A change on the order of 10−21 mol10^{-21}\text{ mol} (or fewer than 11 ion for 0.050%0.050\%) is completely negligible compared to the 9.03×10169.03 \times 10^{16} ions (1.50×10−7 mol1.50 \times 10^{-7}\text{ mol}) present in solution.

03

Determine the final concentration and pH\text{pH}

Because the reaction does not produce acidic or basic products, and the magnitude of water consumption from a single molecule is infinitesimally small relative to the bulk solution: [HX3OX+]=1.00×10−7 M[\ce{H3O+}] = 1.00 \times 10^{-7}\text{ M}

Calculate the resulting pH\text{pH}: pH=−log⁡10[HX3OX+]=−log⁡10(1.00×10−7)=7.00\text{pH} = -\log_{10}[\ce{H3O+}] = -\log_{10}(1.00 \times 10^{-7}) = 7.00

Common Pitfall: Do not confuse the hydrolysis of a macroscopic amount (e.g., 1.2 mol1.2\text{ mol}) of polymer with a single polymer molecule. A single chain involves discrete molecular counts (1,1991{,}199 molecules) rather than macroscopic molar amounts, producing an undetectable change in bulk solvent concentrations.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student treats the single polymer chain as 1 mole of polymer chains, calculating an enormous consumption of hydronium ions that artificially shifts the pH.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    H2O consumed=1,199 mol\text{H}_2\text{O consumed} = 1{,}199\text{ mol}

    Correct

    Moles of HX2O consumed=1,199 molecules6.022×1023 molecules/mol≈1.99×10−21 mol\text{Moles of }\ce{H2O}\text{ consumed} = \frac{1{,}199\text{ molecules}}{6.022 \times 10^{23}\text{ molecules/mol}} \approx 1.99 \times 10^{-21}\text{ mol}

    You treated the consumption of 1,1991{,}199 individual water molecules as 1,199 mol1{,}199\text{ mol} of water. A single polymer chain contains discrete molecular bonds, not Avogadro's number of moles.

  2. Step 2

    H+ consumed=0.00050×1,199 mol  ⟹  0.5995 mol\text{H}^+\text{ consumed} = 0.00050 \times 1{,}199\text{ mol} \implies 0.5995\text{ mol}

    Correct

    Moles of HX+ consumed=0.00050×1.99×10−21 mol≈1.0×10−24 mol\text{Moles of }\ce{H+}\text{ consumed} = 0.00050 \times 1.99 \times 10^{-21}\text{ mol} \approx 1.0 \times 10^{-24}\text{ mol}

    You correctly used the fraction 0.050%=0.000500.050\% = 0.00050, but the result was inflated because it was multiplied by 1,199 mol1{,}199\text{ mol} instead of the molecular quantity.

  3. Step 3

    Initial HX+=1.50×10−7 mol\text{Initial }\ce{H+} = 1.50 \times 10^{-7}\text{ mol}

  4. Step 4

    Since HX+\ce{H+} consumed exceeds initial HX+\ce{H+}, all HX+\ce{H+} is depleted and pH\text{pH} becomes basic.

    Correct

    [HX3OX+]=1.00×10−7 M[\ce{H3O+}] = 1.00 \times 10^{-7}\text{ M}; pH=7.00\text{pH} = 7.00

    Because the actual quantity of ions consumed is virtually zero compared to the 1.50×10−7 mol1.50 \times 10^{-7}\text{ mol} present, the hydronium ion concentration remains unaffected.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the initial moles of hydronium ions using concentration and volume.

You correctly converted the percentage 0.050%0.050\% into the decimal factor 0.000500.00050.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Scale Confusion (Molecules vs. Moles)

none

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You conflated a count of individual molecules with an amount in moles. Complete cleavage of one polymer molecule hydrolyzes 1,1991{,}199 individual glycosidic bonds, which corresponds to roughly 1.99×10−21 mol1.99 \times 10^{-21}\text{ mol}, an amount far too small to measurably alter bulk solution concentrations.

REASONING PATH
Your ACEpath teacher’s suggested approach
Molecular vs. Molar Scale
  • When a problem specifies 'a single polymer chain' or discrete molecular counts, convert to moles by dividing by Avogadro's constant (NA=6.022×1023 mol−1N_A = 6.022 \times 10^{23}\text{ mol}^{-1}) before comparing to molar quantities.

  • Always check whether a given quantity represents individual particles or macroscopic moles before carrying out concentration or pH\text{pH} calculations.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert the 1,1991{,}199 consumed water molecules to moles: nHX2O=1,1996.022×1023≈1.99×10−21 moln_{\ce{H2O}} = \frac{1{,}199}{6.022 \times 10^{23}} \approx 1.99 \times 10^{-21}\text{ mol}.

  2. Calculate the maximum hydronium consumed: 0.00050×(1.99×10−21 mol)≈1.0×10−24 mol0.00050 \times (1.99 \times 10^{-21}\text{ mol}) \approx 1.0 \times 10^{-24}\text{ mol}.

  3. Compare this with the initial 1.50×10−7 mol1.50 \times 10^{-7}\text{ mol} of HX3OX+\ce{H3O+} present: the change is negligible.

  4. The equilibrium concentration remains [HX3OX+]=1.00×10−7 M[\ce{H3O+}] = 1.00 \times 10^{-7}\text{ M}, yielding pH=7.00\text{pH} = 7.00.

Final answer

[HX3OX+]=1.00×10−7 M[\ce{H3O+}] = 1.00 \times 10^{-7}\text{ M}; pH=7.00\text{pH} = 7.00

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the distinction between particle counts (individual molecules) and molar amounts (6.022×10236.022 \times 10^{23} particles per mole).

  • Practice identifying whether biological reaction prompts are set at the single-molecule scale or the bulk macroscopic scale.

OverviewACEpath Teacher's Diagnosis

02 The student subtracts the fractional number of molecules (0.60) directly from the molar concentration rather than converting between molecules and moles.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    H+ consumed=0.00050×1,199=0.60\text{H}^+\text{ consumed} = 0.00050 \times 1{,}199 = 0.60

  2. Step 2

    [HX3OX+]=1.00×10−7−0.60[\ce{H3O+}] = 1.00 \times 10^{-7} - 0.60

    Correct

    [HX3OX+]=1.00×10−7 M−0.60 molecules6.022×1023 molecules/mol×1.50 L≈1.00×10−7 M[\ce{H3O+}] = 1.00 \times 10^{-7}\text{ M} - \frac{0.60\text{ molecules}}{6.022 \times 10^{23}\text{ molecules/mol} \times 1.50\text{ L}} \approx 1.00 \times 10^{-7}\text{ M}

    You subtracted a dimensionless count of molecules directly from a molarity (mol/L\text{mol/L}). To change a concentration, you must first divide the particle count by Avogadro's number (NAN_A) to find moles, and then divide by the solution volume (1.50 L1.50\text{ L}).

  3. Step 3

    Concentration cannot be negative, so [HX3OX+]=0 M and pH cannot be defined.\text{Concentration cannot be negative, so } [\ce{H3O+}] = 0\text{ M} \text{ and } \text{pH cannot be defined.}

    Correct

    [HX3OX+]=1.00×10−7 M  ⟹  pH=7.00[\ce{H3O+}] = 1.00 \times 10^{-7}\text{ M} \implies \text{pH} = 7.00

    This conclusion resulted from the dimensional error in the previous step. Because the microscopic change is negligibly small (<10−24 M< 10^{-24}\text{ M}), the concentration remains 1.00×10−7 M1.00 \times 10^{-7}\text{ M} and the pH\text{pH} remains 7.007.00.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recognized that complete hydrolysis of 1,2001{,}200 monomers consumes 1,1991{,}199 water molecules.

You correctly applied the given percentage of 0.050%0.050\% to find that 0.600.60 molecules correspond to water autoionization ions.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Dimensional analysis: mixing molecular count with molarity

You treated a count of 0.600.60 molecules as a concentration of 0.60 mol/L0.60\text{ mol/L}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You conflated single-molecule discrete counts with macroscopic molar quantities, forgetting to convert individual particles into moles via Avogadro's number before comparing them to solution concentration.

REASONING PATH
Your ACEpath teacher’s suggested approach
Particle Count vs. Molar Quantity
  • Molar concentration is molarity=moles of soluteliters of solution=NNA⋅V\text{molarity} = \frac{\text{moles of solute}}{\text{liters of solution}} = \frac{N}{N_A \cdot V}, where NN is the particle count and NA=6.022×1023 mol−1N_A = 6.022 \times 10^{23}\text{ mol}^{-1}.

  • Always convert individual molecules to moles by dividing by NAN_A before adding to or subtracting from a molar concentration.

Single Polymer Scale
  • A reaction involving a single polymer molecule produces changes on the scale of 10−21 mol10^{-21}\text{ mol}, which is completely negligible in macroscopic volumes (>1 L> 1\text{ L}).

  • Check whether the problem specifies a bulk molar quantity or an isolated single macromolecule before expecting bulk pH shifts.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert the particle count to moles: n=0.60 molecules6.022×1023 molecules/mol≈9.96×10−25 moln = \frac{0.60\text{ molecules}}{6.022 \times 10^{23}\text{ molecules/mol}} \approx 9.96 \times 10^{-25}\text{ mol}.

  2. Calculate the change in molarity in 1.50 L1.50\text{ L}: Δ[HX3OX+]=9.96×10−25 mol1.50 L≈6.64×10−25 M\Delta [\ce{H3O+}] = \frac{9.96 \times 10^{-25}\text{ mol}}{1.50\text{ L}} \approx 6.64 \times 10^{-25}\text{ M}.

  3. Compare this change to the initial concentration: [HX3OX+]=1.00×10−7 M−6.64×10−25 M=1.00×10−7 M[\ce{H3O+}] = 1.00 \times 10^{-7}\text{ M} - 6.64 \times 10^{-25}\text{ M} = 1.00 \times 10^{-7}\text{ M} to three significant figures.

  4. Calculate the final pH\text{pH}: pH=−log⁡10(1.00×10−7)=7.00\text{pH} = -\log_{10}(1.00 \times 10^{-7}) = 7.00.

Final answer

[HX3OX+]=1.00×10−7 M;pH=7.00[\ce{H3O+}] = 1.00 \times 10^{-7}\text{ M}; \text{pH} = 7.00

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the distinction between discrete numbers of molecules and molar concentrations ([X][\text{X}] in mol/L\text{mol/L}).

  • Practice converting between particle counts and molarity by explicitly writing out units (N→÷NAmol→÷Vmol/LN \xrightarrow{\div N_A} \text{mol} \xrightarrow{\div V} \text{mol/L}).

  • Evaluate significant figures and scale magnitude when considering single-molecule reactions in bulk aqueous solutions.

Lock it in

Similar question

01

A single linear polypeptide composed of 500500 amino acids is completely hydrolyzed in 2.0 L2.0\text{ L} of water at pH=7.00\text{pH} = 7.00. How many molecules of HX2O\ce{H2O} are consumed, and how many moles of HX2O\ce{H2O} does this represent?

Answer

499499 molecules; approximately 8.29×10−22 mol8.29 \times 10^{-22}\text{ mol}. Complete hydrolysis of nn monomers in a linear chain cleaves (n−1)(n - 1) peptide bonds, consuming (500−1)=499(500 - 1) = 499 molecules. Converting to moles: n=4996.022×1023 mol−1≈8.29×10−22 moln = \frac{499}{6.022 \times 10^{23}\text{ mol}^{-1}} \approx 8.29 \times 10^{-22}\text{ mol}.

02

An enzyme hydrolyzes 2.50×10−6 mol2.50 \times 10^{-6}\text{ mol} of maltose into individual glucose units in a 500 mL500\text{ mL} unbuffered neutral solution. How many moles of water are consumed, and does this hydrolysis reaction itself significantly change the solution's pH\text{pH}?

Answer

2.50×10−6 mol2.50 \times 10^{-6}\text{ mol} of HX2O\ce{H2O}; no significant change in pH\text{pH}. Each maltose disaccharide requires 11 molecule of HX2O\ce{H2O} to yield two glucose monomers, so 2.50×10−6 mol2.50 \times 10^{-6}\text{ mol} of water is consumed. Because glucose and water are neutral species and the reaction does not produce or consume net protons, the pH\text{pH} remains neutral at 7.007.00.

03

Suppose 1.00 mmol1.00\text{ mmol} of glycogen containing an average chain length of 1,0001{,}000 glucose monomers is completely hydrolyzed into free glucose in 1.00 L1.00\text{ L} of water. Calculate the total moles of water consumed during this macroscopic reaction.

Answer

0.999 mol0.999\text{ mol} of HX2O\ce{H2O}. Each glycogen polymer of n=1,000n = 1{,}000 units requires (n−1)=999(n - 1) = 999 water molecules. For 1.00 mmol=1.00×10−3 mol1.00\text{ mmol} = 1.00 \times 10^{-3}\text{ mol} of polymer chains, the water consumed is 999×(1.00×10−3 mol)=0.999 mol999 \times (1.00 \times 10^{-3}\text{ mol}) = 0.999\text{ mol}.

Loading workspace…