Resources

Consider the behavior of an enzyme-catalyzed reaction obeying Michaelis-Menten kinetics, v0=Vmax⁡[S]Km+[S]v_0 = \frac{V_{\max}[S]}{K_m + [S]}, in two extreme asymptotic regimes: (a) the pseudo-first-order regime where substrate is highly dilute ([S]≪Km[S] \ll K_m), and (b) the zero-order saturation regime where substrate is in vast excess ([S]≫Km[S] \gg K_m). For an enzyme with Vmax⁡=50.0 μmol/(L⋅s)V_{\max} = 50.0\text{ }\mu\text{mol}/(\text{L}\cdot\text{s}) and Km=2.00 mMK_m = 2.00\text{ mM}, calculate the initial rate v0v_0 (in μmol/(L⋅s)\mu\text{mol}/(\text{L}\cdot\text{s})) when [S]=0.00200 mM[S] = 0.00200\text{ mM} using the linear first-order approximation v0≈(Vmax⁡Km)[S]v_0 \approx \left(\frac{V_{\max}}{K_m}\right)[S], and calculate the initial rate v0v_0 when [S]=200 mM[S] = 200\text{ mM} using the exact Michaelis-Menten equation.

Answer and steps

Final answer

(a) v0=0.0500 μmol/(L⋅s)v_0 = 0.0500\text{ }\mu\text{mol}/(\text{L}\cdot\text{s}); (b) v0=49.5 μmol/(L⋅s)v_0 = 49.5\text{ }\mu\text{mol}/(\text{L}\cdot\text{s})

Steps

01

Calculate v0v_0 in the Pseudo-First-Order Regime (Part a)

Understanding Michaelis-Menten Kinetic Regimes

The Michaelis-Menten equation describes the initial rate of an enzyme-catalyzed reaction: v0=Vmax⁡[S]Km+[S]v_0 = \frac{V_{\max}[S]}{K_m + [S]} where:

  • Vmax⁡V_{\max} is the maximum velocity when all enzyme active sites are saturated.
  • KmK_m (Michaelis constant) is the substrate concentration at which the reaction velocity is half of Vmax⁡V_{\max}.
  • [S][S] is the substrate concentration.

When the substrate concentration is extremely dilute ([S]≪Km[S] \ll K_m), most enzyme molecules have empty active sites. In the denominator, Km+[S]≈KmK_m + [S] \approx K_m, reducing the rate equation to a linear first-order approximation:

v0≈(Vmax⁡Km)[S]v_0 \approx \left(\frac{V_{\max}}{K_m}\right)[S]

  • Identify the values:

    • Vmax⁡=50.0 μmol/(L⋅s)V_{\max} = 50.0\text{ }\mu\text{mol}/(\text{L}\cdot\text{s})
    • Km=2.00 mMK_m = 2.00\text{ mM}
    • [S]=0.00200 mM[S] = 0.00200\text{ mM}
  • Compute v0v_0:

v0≈(50.0 μmol/(L⋅s)2.00 mM)×0.00200 mMv_0 \approx \left(\frac{50.0\text{ }\mu\text{mol}/(\text{L}\cdot\text{s})}{2.00\text{ mM}}\right) \times 0.00200\text{ mM}

v0≈25.0 μmol/(L⋅s⋅mM)×0.00200 mM=0.0500 μmol/(L⋅s)v_0 \approx 25.0\text{ }\mu\text{mol}/(\text{L}\cdot\text{s}\cdot\text{mM}) \times 0.00200\text{ mM} = 0.0500\text{ }\mu\text{mol}/(\text{L}\cdot\text{s})


02

Calculate v0v_0 in the Saturated Regime (Part b)

When substrate is present in vast excess ([S]≫Km[S] \gg K_m), enzyme active sites become almost completely saturated. As [S][S] increases, v0v_0 asymptotically approaches Vmax⁡V_{\max}.

  • Identify the values:

    • [S]=200 mM[S] = 200\text{ mM}
    • Km=2.00 mMK_m = 2.00\text{ mM}
    • Vmax⁡=50.0 μmol/(L⋅s)V_{\max} = 50.0\text{ }\mu\text{mol}/(\text{L}\cdot\text{s})
  • Substitute into the exact Michaelis-Menten equation:

v0=Vmax⁡[S]Km+[S]=50.0 μmol/(L⋅s)×200 mM2.00 mM+200 mMv_0 = \frac{V_{\max}[S]}{K_m + [S]} = \frac{50.0\text{ }\mu\text{mol}/(\text{L}\cdot\text{s}) \times 200\text{ mM}}{2.00\text{ mM} + 200\text{ mM}}

v0=10000202 mM μmol/(L⋅s)⋅mM≈49.505 μmol/(L⋅s)v_0 = \frac{10000}{202\text{ mM}}\text{ }\mu\text{mol}/(\text{L}\cdot\text{s})\cdot\text{mM} \approx 49.505\text{ }\mu\text{mol}/(\text{L}\cdot\text{s})

Rounding to three significant figures gives:

v0=49.5 μmol/(L⋅s)v_0 = 49.5\text{ }\mu\text{mol}/(\text{L}\cdot\text{s})


Key Takeaway and Pitfall Check

  • Units consistency: Always ensure that [S][S] and KmK_m are expressed in identical concentration units (mM\text{mM} in this problem) before adding them in the denominator.
  • Kinetic behavior: At very low [S][S], doubling [S][S] roughly doubles the velocity (first order). At very high [S][S], doubling [S][S] produces negligible change because the rate is constrained by the catalytic turnover rate Vmax⁡V_{\max} (zero order).

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student inverts the ratio of V_max and K_m as K_m / V_max when calculating the apparent first-order rate constant.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    v0≈KmVmax⁡×[S]  ⟹  v0=(2.0050.0)×0.00200=0.0000800 μmol/(L⋅s)v_0 \approx \frac{K_m}{V_{\max}} \times [S] \implies v_0 = \left(\frac{2.00}{50.0}\right) \times 0.00200 = 0.0000800\text{ }\mu\text{mol}/(\text{L}\cdot\text{s})

    Correct

    v0≈(Vmax⁡Km)[S]=(50.0 μmol/(L⋅s)2.00 mM)×0.00200 mM=0.0500 μmol/(L⋅s)v_0 \approx \left(\frac{V_{\max}}{K_m}\right)[S] = \left(\frac{50.0\text{ }\mu\text{mol}/(\text{L}\cdot\text{s})}{2.00\text{ mM}}\right) \times 0.00200\text{ mM} = 0.0500\text{ }\mu\text{mol}/(\text{L}\cdot\text{s})

    You inverted the apparent first-order rate constant. When [S]≪Km[S] \ll K_m, the denominator Km+[S]≈KmK_m + [S] \approx K_m, so the equation simplifies to v0≈Vmax⁡[S]Km=(Vmax⁡Km)[S]v_0 \approx \frac{V_{\max}[S]}{K_m} = \left(\frac{V_{\max}}{K_m}\right)[S], which places Vmax⁡V_{\max} in the numerator.

  2. Step 2

    v0=Vmax⁡×[S]Km+[S]=50.0×2002.00+200=10000202≈49.5 μmol/(L⋅s)v_0 = \frac{V_{\max} \times [S]}{K_m + [S]} = \frac{50.0 \times 200}{2.00 + 200} = \frac{10000}{202} \approx 49.5\text{ }\mu\text{mol}/(\text{L}\cdot\text{s})

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified and applied the exact Michaelis-Menten rate equation for part (b).

You preserved matching concentration units (mM\text{mM}) between [S][S] and KmK_m when computing the sum in the denominator.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverted rate constant ratio

You accidentally inverted the ratio Vmax⁡Km\frac{V_{\max}}{K_m} as KmVmax⁡\frac{K_m}{V_{\max}} when writing the first-order approximation formula.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You recalled the ratio from memory rather than algebraically canceling [S][S] from the denominator of Vmax⁡[S]Km+[S]\frac{V_{\max}[S]}{K_m + [S]}, leading to an upside-down rate constant that gives units of rate inverted relative to concentration.

REASONING PATH
Your ACEpath teacher’s suggested approach
Algebraic Derivation of the Low-[S] Regime
  • For [S]≪Km[S] \ll K_m, the sum Km+[S]K_m + [S] is approximately KmK_m, yielding v0≈Vmax⁡[S]Kmv_0 \approx \frac{V_{\max}[S]}{K_m}.

  • Always drop [S][S] from the denominator (Km+[S]→Km)(K_m + [S] \to K_m) rather than trying to memorize whether KmK_m or Vmax⁡V_{\max} is on top.

Dimensional Analysis Check
  • Reaction rate v0v_0 must have units of concentration/time\text{concentration}/\text{time}, so the coefficient multiplying [S][S] must have units of time−1\text{time}^{-1}.

  • Check that Vmax⁡Km\frac{V_{\max}}{K_m} has units μmol/(L⋅s)mM\frac{\mu\text{mol}/(\text{L}\cdot\text{s})}{\text{mM}}, which cancels the mM\text{mM} of [S][S] to leave μmol/(L⋅s)\mu\text{mol}/(\text{L}\cdot\text{s}).

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the linear low-substrate rate equation: v0≈(Vmax⁡Km)[S]v_0 \approx \left(\frac{V_{\max}}{K_m}\right)[S].

  2. Substitute the given parameters: v0≈(50.0 μmol/(L⋅s)2.00 mM)×0.00200 mMv_0 \approx \left(\frac{50.0\text{ }\mu\text{mol}/(\text{L}\cdot\text{s})}{2.00\text{ mM}}\right) \times 0.00200\text{ mM}.

  3. Evaluate the arithmetic: v0≈25.0 s−1×0.00200 μmol/L=0.0500 μmol/(L⋅s)v_0 \approx 25.0\text{ s}^{-1} \times 0.00200\text{ }\mu\text{mol}/\text{L} = 0.0500\text{ }\mu\text{mol}/(\text{L}\cdot\text{s}).

Final answer

(a) v0=0.0500 μmol/(L⋅s)v_0 = 0.0500\text{ }\mu\text{mol}/(\text{L}\cdot\text{s}); (b) v0=49.5 μmol/(L⋅s)v_0 = 49.5\text{ }\mu\text{mol}/(\text{L}\cdot\text{s})

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice deriving the asymptotic limits of the Michaelis-Menten equation directly by setting Km+[S]≈KmK_m + [S] \approx K_m when [S]≪Km[S] \ll K_m and Km+[S]≈[S]K_m + [S] \approx [S] when [S]≫Km[S] \gg K_m.

  • Perform a quick unit check on calculated slopes: verify that velocity divided by concentration yields reciprocal time.

OverviewACEpath Teacher's Diagnosis

02 The student ignores the explicit prompt instruction to use the exact equation at high substrate concentration and instead assumes v₀ equals V_max.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    v0≈Vmax⁡Km×[S]  ⟹  v0=(50.02.00)×0.00200=25.0×0.00200  ⟹  v0=0.0500 μmol/(L⋅s)v_0 \approx \frac{V_{\max}}{K_m} \times [S] \implies v_0 = \left(\frac{50.0}{2.00}\right) \times 0.00200 = 25.0 \times 0.00200 \implies v_0 = 0.0500\text{ }\mu\text{mol}/(\text{L}\cdot\text{s})

  2. Step 2

    Since [S]≫Km, the reaction is at zero order saturation  ⟹  v0=Vmax⁡=50.0 μmol/(L⋅s)\text{Since }[S] \gg K_m\text{, the reaction is at zero order saturation} \implies v_0 = V_{\max} = 50.0\text{ }\mu\text{mol}/(\text{L}\cdot\text{s})

    Correct

    v0=Vmax⁡[S]Km+[S]=50.0×2002.00+200=10000202≈49.5 μmol/(L⋅s)v_0 = \frac{V_{\max}[S]}{K_m + [S]} = \frac{50.0 \times 200}{2.00 + 200} = \frac{10000}{202} \approx 49.5\text{ }\mu\text{mol}/(\text{L}\cdot\text{s})

    You assumed that v0v_0 reaches exactly Vmax⁡V_{\max} at high substrate concentration. However, Vmax⁡V_{\max} is a theoretical limit approached asymptotically as [S]→∞[S] \to \infty, and the prompt explicitly asked you to use the exact equation with [S]=200 mM[S] = 200\text{ mM}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the linear approximation formula for the low-substrate regime.

You substituted the correct numerical values and units to find v0=0.0500 μmol/(L⋅s)v_0 = 0.0500\text{ }\mu\text{mol}/(\text{L}\cdot\text{s}) for part (a).

You recognized that high substrate concentration corresponds to the zero-order kinetic regime.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Asymptotic assumption vs. exact evaluation

You equated the initial velocity directly to Vmax⁡V_{\max} instead of calculating the exact rate from the Michaelis-Menten equation.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Treating the saturation asymptote Vmax⁡V_{\max} as a value reached at finite [S][S] rather than recognizing that v0v_0 is strictly less than Vmax⁡V_{\max} for any finite substrate concentration.

REASONING PATH
Your ACEpath teacher’s suggested approach
Exact Rate at High Substrate
  • For any finite [S][S], v0=Vmax⁡[S]Km+[S]<Vmax⁡v_0 = \frac{V_{\max}[S]}{K_m + [S]} < V_{\max}. The reaction rate only equals Vmax⁡V_{\max} in the theoretical limit as [S]→∞[S] \to \infty.

  • Always substitute the finite [S][S] into v0=Vmax⁡[S]Km+[S]v_0 = \frac{V_{\max}[S]}{K_m + [S]} when asked for the exact rate rather than rounding immediately to Vmax⁡V_{\max}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Substitute Vmax⁡=50.0 μmol/(L⋅s)V_{\max} = 50.0\text{ }\mu\text{mol}/(\text{L}\cdot\text{s}), Km=2.00 mMK_m = 2.00\text{ mM}, and [S]=200 mM[S] = 200\text{ mM} into v0=Vmax⁡[S]Km+[S]v_0 = \frac{V_{\max}[S]}{K_m + [S]}:

  2. v0=50.0×2002.00+200=10000202 μmol/(L⋅s)v_0 = \frac{50.0 \times 200}{2.00 + 200} = \frac{10000}{202}\text{ }\mu\text{mol}/(\text{L}\cdot\text{s})

  3. Divide to find the decimal value: v0≈49.505 μmol/(L⋅s)v_0 \approx 49.505\text{ }\mu\text{mol}/(\text{L}\cdot\text{s}).

Final answer

(a) v0=0.0500 μmol/(L⋅s)v_0 = 0.0500\text{ }\mu\text{mol}/(\text{L}\cdot\text{s}); (b) v0=49.5 μmol/(L⋅s)v_0 = 49.5\text{ }\mu\text{mol}/(\text{L}\cdot\text{s})

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the hyperbolic curve of Michaelis-Menten kinetics to visualize how v0v_0 approaches Vmax⁡V_{\max} asymptotically.

  • Practice computing fractional saturation v0Vmax⁡=[S]Km+[S]\frac{v_0}{V_{\max}} = \frac{[S]}{K_m + [S]} to see what percentage of Vmax⁡V_{\max} is achieved at multiples like 10 Km10\,K_m and 100 Km100\,K_m.

OverviewACEpath Teacher's Diagnosis

03 The student omits K_m from the denominator when evaluating the exact rate law, incorrectly simplifying the expression to V_max × [S] / [S]².

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    v0≈Vmax⁡Km×[S]  ⟹  v0=(50.02.00)×0.00200  ⟹  v0=0.0500 μmol/(L⋅s)v_0 \approx \frac{V_{\max}}{K_m} \times [S] \implies v_0 = \left(\frac{50.0}{2.00}\right) \times 0.00200 \implies v_0 = 0.0500\text{ }\mu\text{mol}/(\text{L}\cdot\text{s})

  2. Step 2

    v0=Vmax⁡×[S]Km×[S]  ⟹  v0=50.0×2002.00×200=10000400v_0 = \frac{V_{\max} \times [S]}{K_m \times [S]} \implies v_0 = \frac{50.0 \times 200}{2.00 \times 200} = \frac{10000}{400}

    Correct

    v0=Vmax⁡[S]Km+[S]=50.0×2002.00+200=10000202v_0 = \frac{V_{\max}[S]}{K_m + [S]} = \frac{50.0 \times 200}{2.00 + 200} = \frac{10000}{202}

    In the Michaelis-Menten rate law, the denominator represents the sum of the Michaelis constant and the substrate concentration (Km+[S]K_m + [S]), not their product.

  3. Step 3

    v0=25.0 μmol/(L⋅s)v_0 = 25.0\text{ }\mu\text{mol}/(\text{L}\cdot\text{s})

    Correct

    v0≈49.5 μmol/(L⋅s)v_0 \approx 49.5\text{ }\mu\text{mol}/(\text{L}\cdot\text{s})

    Because of the multiplication error in the denominator in step 2, your final value simplified to Vmax⁡Km=25.0\frac{V_{\max}}{K_m} = 25.0 instead of approaching Vmax⁡=50.0 μmol/(L⋅s)V_{\max} = 50.0\text{ }\mu\text{mol}/(\text{L}\cdot\text{s}).

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the linear first-order approximation for the dilute substrate regime in part (a).

You maintained consistent units and tracked significant figures accurately in part (a).

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Formula transcription error

You wrote a multiplication symbol (imes imes) instead of an addition sign (++) between KmK_m and [S][S] in the denominator of the Michaelis-Menten equation.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the multiplicative numerator Vmax⁡[S]V_{\max}[S] with the additive denominator Km+[S]K_m + [S], which incorrectly converted a saturating zero-order regime into a constant velocity independent of saturation.

REASONING PATH
Your ACEpath teacher’s suggested approach
Check the Denominator Operation
  • The denominator of the Michaelis-Menten equation is always an addition: Km+[S]K_m + [S].

  • Before substituting numerical values, write out the formula carefully and verify that the denominator has a plus sign.

Saturating Regime Sanity Check
  • When [S]≫Km[S] \gg K_m, active sites are nearly saturated, so v0v_0 must be just below Vmax⁡V_{\max}.

  • Compare your calculated rate at high substrate concentration with Vmax⁡V_{\max}; if v0v_0 is far below Vmax⁡V_{\max}, check your denominator for an incorrect algebraic operation.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the exact rate equation with addition in the denominator: v0=Vmax⁡[S]Km+[S]v_0 = \frac{V_{\max}[S]}{K_m + [S]}.

  2. Substitute the given parameters: v0=50.0 μmol/(L⋅s)×200 mM2.00 mM+200 mM=10000202 mM μmol/(L⋅s)⋅mMv_0 = \frac{50.0\text{ }\mu\text{mol}/(\text{L}\cdot\text{s}) \times 200\text{ mM}}{2.00\text{ mM} + 200\text{ mM}} = \frac{10000}{202\text{ mM}}\text{ }\mu\text{mol}/(\text{L}\cdot\text{s})\cdot\text{mM}.

  3. Divide to find the initial velocity: v0≈49.505 μmol/(L⋅s)v_0 \approx 49.505\text{ }\mu\text{mol}/(\text{L}\cdot\text{s}).

Final answer

(a) v0=0.0500 μmol/(L⋅s)v_0 = 0.0500\text{ }\mu\text{mol}/(\text{L}\cdot\text{s}); (b) v0=49.5 μmol/(L⋅s)v_0 = 49.5\text{ }\mu\text{mol}/(\text{L}\cdot\text{s})

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the hyperbolic curve of Michaelis-Menten kinetics to see how v0v_0 asymptotically approaches Vmax⁡V_{\max} as [S]→∞[S] \to \infty.

  • Practice solving rate calculations at intermediate concentrations (such as [S]=Km[S] = K_m and [S]=2Km[S] = 2K_m) to build confidence with denominator addition.

Lock it in

Similar question

01

An enzyme with Vmax⁡=80.0 μmol/(L⋅s)V_{\max} = 80.0\text{ }\mu\text{mol}/(\text{L}\cdot\text{s}) and Km=4.00 mMK_m = 4.00\text{ mM} acts on a substrate at concentration [S]=0.00500 mM[S] = 0.00500\text{ mM}. Using the pseudo-first-order approximation, calculate the initial reaction rate v0v_0.

Answer

v0=0.100 μmol/(L⋅s)v_0 = 0.100\text{ }\mu\text{mol}/(\text{L}\cdot\text{s}). Key steps: v0≈(Vmax⁡Km)[S]=(80.04.00)×0.00500=20.0×0.00500=0.100 μmol/(L⋅s)v_0 \approx \left(\frac{V_{\max}}{K_m}\right)[S] = \left(\frac{80.0}{4.00}\right) \times 0.00500 = 20.0 \times 0.00500 = 0.100\text{ }\mu\text{mol}/(\text{L}\cdot\text{s}).

02

For an enzyme with Vmax⁡=30.0 μmol/(L⋅s)V_{\max} = 30.0\text{ }\mu\text{mol}/(\text{L}\cdot\text{s}) and Km=1.50 mMK_m = 1.50\text{ mM}, calculate the percentage error introduced by using the linear approximation v0≈(Vmax⁡Km)[S]v_0 \approx \left(\frac{V_{\max}}{K_m}\right)[S] instead of the exact Michaelis-Menten equation when [S]=0.0300 mM[S] = 0.0300\text{ mM}.

Answer

Percentage error ≈+2.0%\approx +2.0\%. Key steps: Exact rate is vexact=30.0×0.03001.50+0.0300=0.9001.530≈0.5882 μmol/(L⋅s)v_{\text{exact}} = \frac{30.0 \times 0.0300}{1.50 + 0.0300} = \frac{0.900}{1.530} \approx 0.5882\text{ }\mu\text{mol}/(\text{L}\cdot\text{s}). Linear estimate is vapprox=30.01.50×0.0300=0.6000 μmol/(L⋅s)v_{\text{approx}} = \frac{30.0}{1.50} \times 0.0300 = 0.6000\text{ }\mu\text{mol}/(\text{L}\cdot\text{s}). Error is 0.6000−0.58820.5882×100%≈2.0%\frac{0.6000 - 0.5882}{0.5882} \times 100\% \approx 2.0\%.

03

Under physiological conditions, an enzyme has Km=0.500 mMK_m = 0.500\text{ mM}. At what maximum substrate concentration [S][S] can the linear approximation v0≈(Vmax⁡Km)[S]v_0 \approx \left(\frac{V_{\max}}{K_m}\right)[S] be used if the calculated rate must overestimate the true rate by no more than 1.00%1.00\%?

Answer

[S]≤0.00505 mM[S] \le 0.00505\text{ mM} (or ≈5.05 μM\approx 5.05\text{ }\mu\text{M}). Key steps: The ratio of approximate to exact rate is vapproxvexact=Km+[S]Km=1+[S]Km\frac{v_{\text{approx}}}{v_{\text{exact}}} = \frac{K_m + [S]}{K_m} = 1 + \frac{[S]}{K_m}. For an overestimate ≤1.00%\le 1.00\%, require [S]Km≤0.0100\frac{[S]}{K_m} \le 0.0100, so [S]≤0.0100×0.500 mM=0.00500 mM[S] \le 0.0100 \times 0.500\text{ mM} = 0.00500\text{ mM} (exact threshold [S]Km+[S]≤0.01  ⟹  [S]=0.010.99Km≈0.00505 mM\frac{[S]}{K_m + [S]} \le 0.01 \implies [S] = \frac{0.01}{0.99} K_m \approx 0.00505\text{ mM}).

Loading workspace…