Resources

A clinical endocrinologist evaluates serum hormone panels for a patient undergoing reproductive assessment. The laboratory reports the patient's serum total testosterone concentration as 520 ng/dL520\text{ ng/dL} and total progesterone concentration as 15.7 ng/mL15.7\text{ ng/mL}. Given the molecular weights of testosterone (C19H28O2\text{C}_{19}\text{H}_{28}\text{O}_2, MW=288.42 g/mol\text{MW} = 288.42\text{ g/mol}) and progesterone (C21H30O2\text{C}_{21}\text{H}_{30}\text{O}_2, MW=314.46 g/mol\text{MW} = 314.46\text{ g/mol}), convert: (a) the testosterone concentration into nanomoles per liter (nmol/L\text{nmol/L}), and (b) the progesterone concentration into nanomoles per liter (nmol/L\text{nmol/L}). Provide both results to three significant figures.

Answer and steps

Final answer

(a) [Testosterone]=18.0 nmol/L[\text{Testosterone}] = 18.0\text{ nmol/L}; (b) [Progesterone]=49.9 nmol/L[\text{Progesterone}] = 49.9\text{ nmol/L}.

Steps

To convert mass concentrations (ng/dL\text{ng/dL} or ng/mL\text{ng/mL}) into molar concentrations (nmol/L\text{nmol/L}), two unit conversions are required:

  1. Convert the volume in the denominator to liters (L\text{L}).
  2. Convert the mass in nanograms (ng\text{ng}) to molar amount in nanomoles (nmol\text{nmol}) using the molar mass (g/mol\text{g/mol}, which is mathematically equivalent to ng/nmol\text{ng/nmol}).

Part (a): Converting Serum Total Testosterone

  1. Convert volume from deciliters (dL\text{dL}) to liters (L\text{L}): Since 1 L=10 dL1\text{ L} = 10\text{ dL}: Concentration in ng/L=520 ng/dL×10 dL1 L=5200 ng/L\text{Concentration in ng/L} = 520\text{ ng/dL} \times \frac{10\text{ dL}}{1\text{ L}} = 5200\text{ ng/L}
  2. Convert nanograms (ng\text{ng}) to nanomoles (nmol\text{nmol}): The molecular weight is 288.42 g/mol=288.42 ng/nmol288.42\text{ g/mol} = 288.42\text{ ng/nmol}. [Testosterone]=5200 ng/L288.42 ng/nmol≈18.029 nmol/L[\text{Testosterone}] = \frac{5200\text{ ng/L}}{288.42\text{ ng/nmol}} \approx 18.029\text{ nmol/L}
  3. Round to three significant figures: [Testosterone]=18.0 nmol/L[\text{Testosterone}] = 18.0\text{ nmol/L}

Part (b): Converting Serum Total Progesterone

  1. Convert volume from milliliters (mL\text{mL}) to liters (L\text{L}): Since 1 L=1000 mL1\text{ L} = 1000\text{ mL}: Concentration in ng/L=15.7 ng/mL×1000 mL1 L=15700 ng/L\text{Concentration in ng/L} = 15.7\text{ ng/mL} \times \frac{1000\text{ mL}}{1\text{ L}} = 15700\text{ ng/L}
  2. Convert nanograms (ng\text{ng}) to nanomoles (nmol\text{nmol}): The molecular weight is 314.46 g/mol=314.46 ng/nmol314.46\text{ g/mol} = 314.46\text{ ng/nmol}. [Progesterone]=15700 ng/L314.46 ng/nmol≈49.927 nmol/L[\text{Progesterone}] = \frac{15700\text{ ng/L}}{314.46\text{ ng/nmol}} \approx 49.927\text{ nmol/L}
  3. Round to three significant figures: [Progesterone]=49.9 nmol/L[\text{Progesterone}] = 49.9\text{ nmol/L}

Common Pitfall to Avoid

  • Mismatched Volume Units: A common mistake is confusing dL\text{dL} (10−1 L10^{-1}\text{ L}) with mL\text{mL} (10−3 L10^{-3}\text{ L}). Always check whether multiplying by 1010 or by 10001000 is needed to express the sample volume in one whole liter.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student misremembers the deciliter-to-liter conversion factor, dividing by 10 instead of multiplying by 10.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    520 ng/dL=52 ng/L520\text{ ng/dL} = 52\text{ ng/L}

    Correct

    520 ng/dL×10 dL1 L=5200 ng/L520\text{ ng/dL} \times \frac{10\text{ dL}}{1\text{ L}} = 5200\text{ ng/L}

    Because 1 L=10 dL1\text{ L} = 10\text{ dL}, a liter contains 1010 times the volume of a deciliter. Therefore, hormone mass per liter must be 1010 times greater, not 1010 times smaller.

  2. Step 2

    (52 ng/L)/(288.42 ng/nmol)=0.180 nmol/L(52\text{ ng/L}) / (288.42\text{ ng/nmol}) = 0.180\text{ nmol/L}

    Correct

    5200 ng/L288.42 ng/nmol≈18.0 nmol/L\frac{5200\text{ ng/L}}{288.42\text{ ng/nmol}} \approx 18.0\text{ nmol/L}

    You carried out the division by molar mass and significant-figure rounding correctly, but the result is off by a factor of 100100 due to the earlier conversion error in Step 1.

  3. Step 3

    15.7 ng/mL=15700 ng/L15.7\text{ ng/mL} = 15700\text{ ng/L}

  4. Step 4

    (15700 ng/L)/(314.46 ng/nmol)=49.9 nmol/L(15700\text{ ng/L}) / (314.46\text{ ng/nmol}) = 49.9\text{ nmol/L}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recognized that the ratio g/mol\text{g/mol} is numerically identical to ng/nmol\text{ng/nmol}.

You executed the milliliter-to-liter conversion in Part (b) accurately.

You reported your final calculated answers to three significant figures.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverted denominator unit conversion

You divided 520520 by 1010 instead of multiplying by 1010 when converting from per deciliter to per liter.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Inverting conversion factors when units appear in the denominator: because a deciliter is smaller than a liter (1 dL=0.1 L1\text{ dL} = 0.1\text{ L}), a larger volume (1 liter) must contain proportionally more solute mass.

REASONING PATH
Your ACEpath teacher’s suggested approach
Denominator Unit Scaling
  • When converting a concentration with a smaller volume unit in the denominator to a larger volume unit (e.g., dL→L\text{dL} \to \text{L}), the numerical concentration must increase.

  • Always write out unit cancellation explicitly: massdL×10 dL1 L=10×massL\frac{\text{mass}}{\text{dL}} \times \frac{10\text{ dL}}{1\text{ L}} = \frac{10 \times \text{mass}}{\text{L}}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert testosterone concentration from ng/dL\text{ng/dL} to ng/L\text{ng/L}: 520 ng/dL×10 dL1 L=5200 ng/L520\text{ ng/dL} \times \frac{10\text{ dL}}{1\text{ L}} = 5200\text{ ng/L}.

  2. Divide by the molecular weight of testosterone: 5200 ng/L288.42 ng/nmol≈18.029 nmol/L\frac{5200\text{ ng/L}}{288.42\text{ ng/nmol}} \approx 18.029\text{ nmol/L}.

  3. Round to three significant figures: [Testosterone]=18.0 nmol/L[\text{Testosterone}] = 18.0\text{ nmol/L}.

Final answer

(a) [Testosterone]=18.0 nmol/L[\text{Testosterone}] = 18.0\text{ nmol/L}; (b) [Progesterone]=49.9 nmol/L[\text{Progesterone}] = 49.9\text{ nmol/L}.

NEXT STEPS
Final Takeaways from Your Teacher
  • Review denominator unit conversions using formal dimensional analysis with fraction cancellation.

  • Perform a sanity check on concentration values: a 1 L1\text{ L} container holds 1010 times more fluid than a 1 dL1\text{ dL} container, so it must contain 1010 times more mass.

OverviewACEpath Teacher's Diagnosis

02 The student multiplies by molecular weight instead of dividing by molecular weight when converting mass concentration to molar concentration.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    520 ng/dL=5200 ng/L520\text{ ng/dL} = 5200\text{ ng/L}

  2. Step 2

    5200×288.42=1.50×106 nmol/L5200 \times 288.42 = 1.50 \times 10^6\text{ nmol/L}

    Correct

    5200 ng/L288.42 ng/nmol≈18.0 nmol/L\frac{5200\text{ ng/L}}{288.42\text{ ng/nmol}} \approx 18.0\text{ nmol/L}

    To convert nanograms to nanomoles, you need to divide by the molar mass (ng/nmol\text{ng/nmol}), not multiply. Multiplying gives units of ng2/(nmol⋅L)\text{ng}^2/(\text{nmol}\cdot\text{L}) instead of nmol/L\text{nmol/L}.

  3. Step 3

    15.7 ng/mL=15700 ng/L15.7\text{ ng/mL} = 15700\text{ ng/L}

  4. Step 4

    15700×314.46=4.94×106 nmol/L15700 \times 314.46 = 4.94 \times 10^6\text{ nmol/L}

    Correct

    15700 ng/L314.46 ng/nmol≈49.9 nmol/L\frac{15700\text{ ng/L}}{314.46\text{ ng/nmol}} \approx 49.9\text{ nmol/L}

    As with testosterone, you multiplied by molecular weight rather than dividing by it to find the number of nanomoles.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly converted deciliters to liters by scaling by a factor of 1010.

You correctly converted milliliters to liters by scaling by a factor of 10001000.

You rounded your calculated values appropriately to three significant figures.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverse operation in dimensional analysis (mass to moles conversion)

Multiplying by molecular weight rather than dividing by molecular weight when converting mass concentration to molar concentration.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You inverted the relationship between mass, molar amount, and molar mass: since moles=massmolar mass\text{moles} = \frac{\text{mass}}{\text{molar mass}}, finding nanomoles from nanograms requires division by MW\text{MW} rather than multiplication.

REASONING PATH
Your ACEpath teacher’s suggested approach
Dimensional Unit Cancellation
  • Amount (nmol)=Mass (ng)Molar Mass (ng/nmol)\text{Amount (nmol)} = \frac{\text{Mass (ng)}}{\text{Molar Mass (ng/nmol)}}

  • Write out conversion factors with explicit units so that ng\text{ng} in the numerator cancels with ng\text{ng} in the denominator, leaving nmol\text{nmol} on top.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. For testosterone, divide the mass concentration by its molar mass: [Testosterone]=5200 ng/L288.42 ng/nmol≈18.029 nmol/L[\text{Testosterone}] = \frac{5200\text{ ng/L}}{288.42\text{ ng/nmol}} \approx 18.029\text{ nmol/L}.

  2. Round testosterone to three significant figures: 18.0 nmol/L18.0\text{ nmol/L}.

  3. For progesterone, divide the mass concentration by its molar mass: [Progesterone]=15700 ng/L314.46 ng/nmol≈49.927 nmol/L[\text{Progesterone}] = \frac{15700\text{ ng/L}}{314.46\text{ ng/nmol}} \approx 49.927\text{ nmol/L}.

  4. Round progesterone to three significant figures: 49.9 nmol/L49.9\text{ nmol/L}.

Final answer

(a) [Testosterone]=18.0 nmol/L[\text{Testosterone}] = 18.0\text{ nmol/L}; (b) [Progesterone]=49.9 nmol/L[\text{Progesterone}] = 49.9\text{ nmol/L}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always write out units explicitly in fraction form (e.g., 1 nmol288.42 ng\frac{1\text{ nmol}}{288.42\text{ ng}}) to verify that unwanted units cancel out.

  • Perform a sanity check: dividing several thousand nanograms by a molecular weight around 300300 should yield tens of nanomoles, not millions.

OverviewACEpath Teacher's Diagnosis

03 The student treats 1 mL as 0.01 L (100 mL/L) instead of 0.001 L (1000 mL/L) when converting progesterone volume units.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    520 ng/dL=5200 ng/L520\text{ ng/dL} = 5200\text{ ng/L}

  2. Step 2

    (5200 ng/L)/(288.42 ng/nmol)=18.0 nmol/L(5200\text{ ng/L}) / (288.42\text{ ng/nmol}) = 18.0\text{ nmol/L}

  3. Step 3

    15.7 ng/mL=1570 ng/L15.7\text{ ng/mL} = 1570\text{ ng/L}

    Correct

    15.7 ng/mL×1000 mL/L=15700 ng/L15.7\text{ ng/mL} \times 1000\text{ mL/L} = 15700\text{ ng/L}

    You multiplied by 100100 instead of 10001000. Because 1 L=1000 mL1\text{ L} = 1000\text{ mL} (milli- denotes 10−310^{-3}), 15.7 ng/mL15.7\text{ ng/mL} is equivalent to 15700 ng/L15700\text{ ng/L}.

  4. Step 4

    (1570 ng/L)/(314.46 ng/nmol)=4.99 nmol/L(1570\text{ ng/L}) / (314.46\text{ ng/nmol}) = 4.99\text{ nmol/L}

    Correct

    [Progesterone]=15700 ng/L314.46 ng/nmol≈49.9 nmol/L[\text{Progesterone}] = \frac{15700\text{ ng/L}}{314.46\text{ ng/nmol}} \approx 49.9\text{ nmol/L}

    Your division and rounding were calculated correctly from your previous value, but the final answer is off by a factor of 1010 due to the unit conversion error in Step 3.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the equivalence 1 g/mol=1 ng/nmol1\text{ g/mol} = 1\text{ ng/nmol} to convert mass concentration to molar concentration.

You converted deciliters to liters accurately in part (a).

You rounded your calculated values properly to three significant figures.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Metric prefix volume conversion error (mL vs dL)

Multiplying by 100100 rather than 10001000 when converting per-milliliter concentration to per-liter concentration.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Conflating the metric prefix milli- (10−310^{-3}, factor of 10001000) with centi- (10−210^{-2}, factor of 100100), leading to an incorrect conversion factor of 100 mL/L100\text{ mL/L} instead of 1000 mL/L1000\text{ mL/L}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Metric Volume Prefixes
  • 1 L=10 dL=1000 mL1\text{ L} = 10\text{ dL} = 1000\text{ mL}

  • Check that each milliliter step scales by 10310^3, whereas deciliter steps scale by 10110^1.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert 15.7 ng/mL15.7\text{ ng/mL} to ng/L\text{ng/L} using 1 L=1000 mL1\text{ L} = 1000\text{ mL}: 15.7 ng/mL×1000 mL/L=15700 ng/L15.7\text{ ng/mL} \times 1000\text{ mL/L} = 15700\text{ ng/L}.

  2. Divide by the molar mass of progesterone (314.46 ng/nmol314.46\text{ ng/nmol}): 15700 ng/L314.46 ng/nmol≈49.927 nmol/L\frac{15700\text{ ng/L}}{314.46\text{ ng/nmol}} \approx 49.927\text{ nmol/L}.

  3. Round to three significant figures: 49.9 nmol/L49.9\text{ nmol/L}.

Final answer

(a) [Testosterone]=18.0 nmol/L[\text{Testosterone}] = 18.0\text{ nmol/L}; (b) [Progesterone]=49.9 nmol/L[\text{Progesterone}] = 49.9\text{ nmol/L}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the standard SI prefixes: deci- (10−110^{-1}), centi- (10−210^{-2}), and milli- (10−310^{-3}).

  • Write out explicit dimensional analysis fractions with canceling units (such as 1000 mL1 L\frac{1000\text{ mL}}{1\text{ L}}) rather than doing mental conversions.

Lock it in

Similar question

01

A patient's serum estradiol concentration is reported as 27.2 pg/mL27.2\text{ pg/mL}. Given that estradiol has a molecular weight of 272.38 g/mol272.38\text{ g/mol}, calculate the estradiol concentration in picomoles per liter (pmol/L\text{pmol/L}) to three significant figures.

Answer

100 pmol/L100\text{ pmol/L}. Step 1: Convert volume to liters: 27.2 pg/mL×1000 mL/L=27200 pg/L27.2\text{ pg/mL} \times 1000\text{ mL/L} = 27200\text{ pg/L}. Step 2: Convert to picomoles using MW=272.38 pg/pmol\text{MW} = 272.38\text{ pg/pmol}: 27200 pg/L272.38 pg/pmol≈99.86 pmol/L≈100 pmol/L\frac{27200\text{ pg/L}}{272.38\text{ pg/pmol}} \approx 99.86\text{ pmol/L} \approx 100\text{ pmol/L}.

02

A clinical laboratory reports a serum cortisol level of 18.1 \mug/dL18.1\text{ \mu g/dL}. The molecular weight of cortisol is 362.46 g/mol362.46\text{ g/mol}. Determine the cortisol concentration in nanomoles per liter (nmol/L\text{nmol/L}) to three significant figures.

Answer

499 nmol/L499\text{ nmol/L}. Step 1: Convert to ng/L\text{ng/L}: 18.1 \mug/dL×10 dL/L=181 \mug/L=181000 ng/L18.1\text{ \mu g/dL} \times 10\text{ dL/L} = 181\text{ \mu g/L} = 181000\text{ ng/L}. Step 2: Divide by molar mass: 181000 ng/L362.46 ng/nmol≈499.37 nmol/L≈499 nmol/L\frac{181000\text{ ng/L}}{362.46\text{ ng/nmol}} \approx 499.37\text{ nmol/L} \approx 499\text{ nmol/L}.

03

An athlete has a serum free testosterone level of 14.4 ng/dL14.4\text{ ng/dL}. A second laboratory measures the same sample in SI units as 500 pmol/L500\text{ pmol/L}. Using the molecular weight of testosterone (288.42 g/mol288.42\text{ g/mol}), determine whether these two reported values represent the same concentration within three significant figures.

Answer

Yes, they represent the same concentration. Step 1: Convert 14.4 ng/dL14.4\text{ ng/dL} to ng/L\text{ng/L}: 14.4×10=144 ng/L14.4 \times 10 = 144\text{ ng/L}. Step 2: Calculate molarity in nmol/L\text{nmol/L}: 144 ng/L288.42 ng/nmol≈0.49927 nmol/L\frac{144\text{ ng/L}}{288.42\text{ ng/nmol}} \approx 0.49927\text{ nmol/L}. Step 3: Convert to pmol/L\text{pmol/L}: 0.49927 nmol/L×1000 pmol/nmol≈499 pmol/L0.49927\text{ nmol/L} \times 1000\text{ pmol/nmol} \approx 499\text{ pmol/L}, which matches 500 pmol/L500\text{ pmol/L} to within 0.2%0.2\%.

Loading workspace…