Resources

A yeast cell maintains intracellular potassium homeostasis against a concentration gradient via the plasma membrane H+/K+\text{H}^+/\text{K}^+ symporter. The free energy required to transport one mole of K+\text{K}^+ inward is ΔGin=+17.5 kJ/mol\Delta G_{\text{in}} = +17.5\text{ kJ/mol}. Under standard physiological conditions, the hydrolysis of intracellular ATP (ATP+H2O→ADP+Pi\text{ATP} + \text{H}_2\text{O} \rightarrow \text{ADP} + \text{P}_i) yields ΔGATP=−50.0 kJ/mol\Delta G_{\text{ATP}} = -50.0\text{ kJ/mol}. If the active transport process operates at an overall thermodynamic coupling efficiency of 70.0%70.0\%, calculate the maximum number of moles of K+\text{K}^+ ions that can be accumulated inside the cell per mole of ATP hydrolyzed.

Answer and steps

Final answer

2.00 mol K+2.00\text{ mol }\text{K}^+ transported per mole of ATP\text{ATP} hydrolyzed.

Steps

01

Identify the Total Energy Yield of ATP Hydrolysis

Under the specified physiological conditions, the hydrolysis of one mole of ATP\text{ATP} releases free energy: ∣ΔGATP∣=50.0 kJ/mol|\Delta G_{\text{ATP}}| = 50.0\text{ kJ/mol}

02

Account for Thermodynamic Coupling Efficiency

Biological energy transduction is never completely efficient; some energy is dissipated as heat. With an efficiency (η\eta) of 70.0%70.0\%, the effective free energy available to drive the unfavorable transport of KX+\ce{K+} ions is: ΔGavailable=η⋅∣ΔGATP∣\Delta G_{\text{available}} = \eta \cdot |\Delta G_{\text{ATP}}| ΔGavailable=0.700⋅50.0 kJ/mol=35.0 kJ/mol\Delta G_{\text{available}} = 0.700 \cdot 50.0\text{ kJ/mol} = 35.0\text{ kJ/mol}

03

Calculate the Moles of KX+\ce{K+} Transported

Transporting one mole of KX+\ce{K+} inward against its electrochemical gradient requires: ΔGin=+17.5 kJ/mol\Delta G_{\text{in}} = +17.5\text{ kJ/mol}

The maximum stoichiometric amount of KX+\ce{K+} accumulated per mole of ATP\text{ATP} hydrolyzed (nn) is given by the ratio of available coupling energy to the energy cost per mole of ion: n=ΔGavailableΔGin=35.0 kJ/mol17.5 kJ/mol=2.00 moln = \frac{\Delta G_{\text{available}}}{\Delta G_{\text{in}}} = \frac{35.0\text{ kJ/mol}}{17.5\text{ kJ/mol}} = 2.00\text{ mol}

Common Pitfall

A frequent error is dividing the total theoretical free energy (−50.0 kJ/mol-50.0\text{ kJ/mol}) directly by +17.5 kJ/mol+17.5\text{ kJ/mol}, yielding ≈2.86 mol\approx 2.86\text{ mol}. In living systems, thermodynamic efficiency limits the fraction of energy conserved to perform work, making it necessary to apply the efficiency factor (70.0%70.0\%) before calculating stoichiometric transport capacity.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student ignores the 70.0% coupling efficiency and assumes 100% of the free energy from ATP hydrolysis is converted into transport work, yielding 2.86 moles of K⁺.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Energy available from ATP=50.0 kJ/mol\text{Energy available from ATP} = 50.0\text{ kJ/mol}

    Correct

    ΔGavailable=η⋅∣ΔGATP∣=0.700⋅50.0 kJ/mol=35.0 kJ/mol\Delta G_{\text{available}} = \eta \cdot |\Delta G_{\text{ATP}}| = 0.700 \cdot 50.0\text{ kJ/mol} = 35.0\text{ kJ/mol}

    You set the available energy directly to the full theoretical yield of ATP hydrolysis (50.0 kJ/mol50.0\text{ kJ/mol}). Because the cellular transport process operates at an efficiency of η=70.0%\eta = 70.0\%, only 70.0%70.0\% of that free energy is conserved to drive active transport.

  2. Step 2

    Energy required per mole of K+=17.5 kJ/mol  ⟹  Moles of K+=50.0/17.5=2.86 mol\text{Energy required per mole of }\text{K}^+ = 17.5\text{ kJ/mol} \implies \text{Moles of }\text{K}^+ = 50.0 / 17.5 = 2.86\text{ mol}

    Correct

    n=ΔGavailableΔGin=35.0 kJ/mol17.5 kJ/mol=2.00 moln = \frac{\Delta G_{\text{available}}}{\Delta G_{\text{in}}} = \frac{35.0\text{ kJ/mol}}{17.5\text{ kJ/mol}} = 2.00\text{ mol}

    You used the correct division method to find the stoichiometric ratio, but this step inherited the unadjusted value of 50.0 kJ/mol50.0\text{ kJ/mol} from Step 1 instead of the effective 35.0 kJ/mol35.0\text{ kJ/mol}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly extracted the total magnitude of free energy released per mole of ATP hydrolyzed (50.0 kJ/mol50.0\text{ kJ/mol}).

You correctly identified the free energy cost of inward potassium transport (17.5 kJ/mol17.5\text{ kJ/mol}).

You set up the stoichiometric ratio correctly by dividing available energy by the energy needed per mole of ion.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omission of Coupling Efficiency

You treated the biological energy conversion as 100%100\% efficient and forgot to multiply the free energy of ATP hydrolysis by the 70.0%70.0\% coupling efficiency factor.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Overlooking that real biological energy transductions are not 100%100\% efficient and require multiplying the theoretical free energy yield by the coupling efficiency (η\eta) to obtain the net free energy available for cellular work.

REASONING PATH
Your ACEpath teacher’s suggested approach
Thermodynamic Coupling Efficiency
  • Living systems dissipate a fraction of free energy as heat, so usable energy is ΔGavailable=η⋅∣ΔGdriving∣\Delta G_{\text{available}} = \eta \cdot |\Delta G_{\text{driving}}|, where η<1\eta < 1.

  • Always check whether a coupling efficiency or percentage yield is specified, and scale the driving reaction's free energy before calculating product or transport yields.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Apply the 70.0%70.0\% thermodynamic efficiency: ΔGavailable=0.700×50.0 kJ/mol=35.0 kJ/mol\Delta G_{\text{available}} = 0.700 \times 50.0\text{ kJ/mol} = 35.0\text{ kJ/mol}.

  2. Divide by the free energy cost per mole of K+\text{K}^+: n=35.0 kJ/mol17.5 kJ/mol=2.00 moln = \frac{35.0\text{ kJ/mol}}{17.5\text{ kJ/mol}} = 2.00\text{ mol}.

Final answer

2.00 mol K+2.00\text{ mol }\text{K}^+

NEXT STEPS
Final Takeaways from Your Teacher
  • Review how free energy coupling efficiency limits the useful work performed during active transport.

  • Practice biological energetics problems that specify mechanical or thermodynamic conversion efficiencies.

OverviewACEpath Teacher's Diagnosis

02 The student divides by the efficiency instead of multiplying, improperly calculating the available energy as 50.0 / 0.700 = 71.43 kJ/mol and obtaining 4.08 moles of K⁺.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Available energy=50.0/0.70=71.43 kJ/mol\text{Available energy} = 50.0 / 0.70 = 71.43\text{ kJ/mol}

    Correct

    ΔGavailable=50.0 kJ/mol×0.700=35.0 kJ/mol\Delta G_{\text{available}} = 50.0\text{ kJ/mol} \times 0.700 = 35.0\text{ kJ/mol}

    You divided by the efficiency (0.700.70) instead of multiplying by it. Because thermodynamic coupling efficiency accounts for energy lost as heat, the usable energy captured to perform work must be a fraction of the total energy released (70.0%70.0\% of 50.0 kJ/mol50.0\text{ kJ/mol}), which is 35.0 kJ/mol35.0\text{ kJ/mol} rather than 71.43 kJ/mol71.43\text{ kJ/mol}.

  2. Step 2

    Moles of K+=71.43/17.5=4.08 mol\text{Moles of }\text{K}^+ = 71.43 / 17.5 = 4.08\text{ mol}

    Correct

    n=35.0 kJ/mol17.5 kJ/mol=2.00 moln = \frac{35.0\text{ kJ/mol}}{17.5\text{ kJ/mol}} = 2.00\text{ mol}

    Your division setup is mathematically sound, but this final result is affected by the incorrect available energy value carried over from Step 1.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that the number of moles of K+\text{K}^+ transported equals the available energy divided by the molar cost of transport (17.5 kJ/mol17.5\text{ kJ/mol}).

You converted the percentage efficiency of 70.0%70.0\% into its decimal form 0.700.70.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverted efficiency factor

You divided the input energy by the efficiency fraction instead of multiplying by it.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated thermodynamic efficiency as an scaling divisor rather than as the fractional yield (Useful Work=η×Total Input\text{Useful Work} = \eta \times \text{Total Input}), leading to a physically impossible result where available energy exceeded the total energy released by ATP hydrolysis.

REASONING PATH
Your ACEpath teacher’s suggested approach
Sanity check on energy conservation
  • In any passive or active biological process, the usable output energy cannot exceed the total input energy (ΔGavailable≤∣ΔGATP∣\Delta G_{\text{available}} \le |\Delta G_{\text{ATP}}|).

  • Whenever you compute available free energy with efficiency η<1\eta < 1, verify that your resulting energy is strictly smaller than the starting free energy of the reaction.

Applying efficiency to an energy source
  • Energy available for work=η⋅∣ΔGsource∣\text{Energy available for work} = \eta \cdot |\Delta G_{\text{source}}|.

  • Multiply the total energy released by the decimal efficiency η\eta to find the energy harnessed for endergonic transport.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Calculate the effective available energy by multiplying the total energy yield by the coupling efficiency: ΔGavailable=50.0 kJ/mol×0.700=35.0 kJ/mol\Delta G_{\text{available}} = 50.0\text{ kJ/mol} \times 0.700 = 35.0\text{ kJ/mol}.

  2. Divide the available coupling energy by the energy required to transport one mole of K+\text{K}^+ inward: n=35.0 kJ/mol17.5 kJ/mol=2.00 moln = \frac{35.0\text{ kJ/mol}}{17.5\text{ kJ/mol}} = 2.00\text{ mol}.

Final answer

2.00 mol K+2.00\text{ mol }\text{K}^+

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the definition of thermodynamic coupling efficiency as η=useful work outputtotal energy input\eta = \frac{\text{useful work output}}{\text{total energy input}}.

  • Always perform a magnitude check on intermediate values: usable energy must be less than total energy released.

  • Practice related bioenergetics problems involving membrane transporters and stoichiometry.

OverviewACEpath Teacher's Diagnosis

03 The student truncates the final value to an integer without checking if the fractional mole of ions is acceptable for a molar quantity, or incorrectly treats the molar calculation as requiring discrete whole-number molecules per cycle.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Correct
  1. Step 1

    Available energy=50.0 kJ/mol×0.700=35.0 kJ/mol\text{Available energy} = 50.0\text{ kJ/mol} \times 0.700 = 35.0\text{ kJ/mol}

  2. Step 2

    Transport cost=17.5 kJ/mol  ⟹  Moles of K+=35.0/17.5=2 mol\text{Transport cost} = 17.5\text{ kJ/mol} \implies \text{Moles of }\text{K}^+ = 35.0 / 17.5 = 2\text{ mol}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly applied the 70.0%70.0\% thermodynamic coupling efficiency factor to find the net usable free energy from ATP hydrolysis.

You accurately identified the energy cost per mole of K+\text{K}^+ transport against its gradient.

You correctly computed the ratio of available energy to transport cost to find the maximum molar yield.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
none
CORRECTED PATH
ACEpath Teacher's Demonstration
  1. State the calculated transport capacity with appropriate significant figures: n=2.00 mol K+/mol ATPn = 2.00\text{ mol }\text{K}^+ / \text{mol ATP}.

Final answer

2.00 mol K+2.00\text{ mol }\text{K}^+

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice problems where electrochemical potentials (combining membrane voltage ΔΨ\Delta \Psi and concentration gradients) are used to calculate ΔGin\Delta G_{\text{in}} directly.

  • Remember to report final numerical answers to match the number of significant figures given in the prompt (33 significant figures, i.e., 2.00 mol2.00\text{ mol}).

Lock it in

Similar question

01

A primary active calcium pump hydrolyzes one mole of ATP (ΔG=−52.0 kJ/mol\Delta G = -52.0\text{ kJ/mol}) with a coupling efficiency of 50.0%50.0\%. If pumping one mole of Ca2+\text{Ca}^{2+} against its electrochemical gradient requires +13.0 kJ/mol+13.0\text{ kJ/mol}, calculate the maximum moles of Ca2+\text{Ca}^{2+} transported per mole of ATP hydrolyzed.

Answer

2.00 mol Ca2+2.00\text{ mol }\text{Ca}^{2+}. Usable energy is ΔGavailable=0.500×52.0 kJ/mol=26.0 kJ/mol\Delta G_{\text{available}} = 0.500 \times 52.0\text{ kJ/mol} = 26.0\text{ kJ/mol}. Moles of Ca2+=26.0 kJ/mol13.0 kJ/mol=2.00 mol\text{Ca}^{2+} = \frac{26.0\text{ kJ/mol}}{13.0\text{ kJ/mol}} = 2.00\text{ mol}.

02

An active symporter transports a neutral amino acid into a mammalian cell where ΔGtransport=+10.5 kJ/mol\Delta G_{\text{transport}} = +10.5\text{ kJ/mol}. The driving ATP hydrolysis yields ΔG=−48.0 kJ/mol\Delta G = -48.0\text{ kJ/mol}, and the transporter operates at an efficiency of 65.625%65.625\%. Determine the number of moles of amino acid transported per mole of ATP.

Answer

3.00 mol3.00\text{ mol}. Available free energy is ΔGavailable=0.65625×48.0 kJ/mol=31.5 kJ/mol\Delta G_{\text{available}} = 0.65625 \times 48.0\text{ kJ/mol} = 31.5\text{ kJ/mol}. Moles transported =31.5 kJ/mol10.5 kJ/mol=3.00 mol= \frac{31.5\text{ kJ/mol}}{10.5\text{ kJ/mol}} = 3.00\text{ mol}.

03

A secondary active proton-sucrose antiporter moves sucrose across the tonoplast (ΔGsucrose=+24.0 kJ/mol\Delta G_{\text{sucrose}} = +24.0\text{ kJ/mol}). The process is driven by the proton motive force established by a vacuolar H+\text{H}^+-ATPase. The ATPase hydrolyzes ATP (ΔG=−60.0 kJ/mol\Delta G = -60.0\text{ kJ/mol}) at 80.0%80.0\% efficiency to pump protons, and the antiporter itself operates at 75.0%75.0\% mechanical coupling efficiency. What is the maximum number of moles of sucrose accumulated per mole of ATP consumed?

Answer

1.50 mol1.50\text{ mol}. The overall system efficiency is ηnet=0.800×0.750=0.600\eta_{\text{net}} = 0.800 \times 0.750 = 0.600 (60.0%60.0\%). Total available energy for sucrose accumulation is 0.600×60.0 kJ/mol=36.0 kJ/mol0.600 \times 60.0\text{ kJ/mol} = 36.0\text{ kJ/mol}. Moles of sucrose =36.0 kJ/mol24.0 kJ/mol=1.50 mol= \frac{36.0\text{ kJ/mol}}{24.0\text{ kJ/mol}} = 1.50\text{ mol}.

Loading workspace…