Resources

In plant cells, the maintenance of cell turgor and structural rigidity couples mechanical pressure to the osmotic gradient regulated by the central vacuole. A plant cell with an internal solute potential ψs=−0.90 MPa\psi_s = -0.90\text{ MPa} and turgor pressure ψp=0.50 MPa\psi_p = 0.50\text{ MPa} is placed in a sucrose bath with an external solute potential ψs,ext=−0.75 MPa\psi_{s,\text{ext}} = -0.75\text{ MPa} in an open beaker (ψp,ext=0 MPa\psi_{p,\text{ext}} = 0\text{ MPa}). Calculate the initial net water potential ψw\psi_w of the cell, determine the direction of net water movement across the tonoplast and plasma membrane, and identify the specific vacuolar membrane structure that regulates rapid bidirectional water flux.

Answer and steps

Final answer

ψw,cell=−0.40 MPa\psi_{w,\text{cell}} = -0.40\text{ MPa}, ψw,ext=−0.75 MPa\psi_{w,\text{ext}} = -0.75\text{ MPa}; Net water movement is outward (from cell to external solution, inducing plasmolysis); The protein channel regulating this rapid flux across the tonoplast is an aquaporin\text{aquaporin} (specifically a tonoplast intrinsic protein, TIP\text{TIP}).

Steps

01

Water Potential Equation

Total water potential (ψw\psi_w) in plant tissues is the sum of the solute (osmotic) potential (ψs\psi_s) and the pressure potential (turgor pressure, ψp\psi_p):

ψw=ψs+ψp\psi_w = \psi_s + \psi_p

02

Calculate the Cell and External Water Potentials

  • Internal cell water potential (ψw,cell\psi_{w,\text{cell}}): Given ψs=−0.90 MPa\psi_s = -0.90\text{ MPa} and ψp=0.50 MPa\psi_p = 0.50\text{ MPa}: ψw,cell=−0.90 MPa+0.50 MPa=−0.40 MPa\psi_{w,\text{cell}} = -0.90\text{ MPa} + 0.50\text{ MPa} = -0.40\text{ MPa}
  • External solution water potential (ψw,ext\psi_{w,\text{ext}}): In an open container at atmospheric pressure, the pressure potential is zero (ψp,ext=0 MPa\psi_{p,\text{ext}} = 0\text{ MPa}). Given ψs,ext=−0.75 MPa\psi_{s,\text{ext}} = -0.75\text{ MPa}: ψw,ext=−0.75 MPa+0 MPa=−0.75 MPa\psi_{w,\text{ext}} = -0.75\text{ MPa} + 0\text{ MPa} = -0.75\text{ MPa}
03

Determine the Direction of Net Water Movement

Water moves spontaneously down its free energy gradient, flowing from a region of higher (less negative) water potential to a region of lower (more negative) water potential:

ψw,cell  (−0.40 MPa)>ψw,ext  (−0.75 MPa)\psi_{w,\text{cell}}\;(-0.40\text{ MPa}) > \psi_{w,\text{ext}}\;(-0.75\text{ MPa})

Because the cell has a higher water potential than the external hypertonic sucrose bath, net water movement is outward, moving from the vacuole and cytoplasm across the tonoplast and plasma membrane into the surrounding solution. As water exits, turgor pressure drops, potentially leading to plasmolysis.

Common Pitfall: When comparing negative numbers, a value closer to zero is higher (i.e., −0.40>−0.75-0.40 > -0.75). Do not mistake the larger magnitude (0.750.75) as representing a higher water potential.

04

Identify the Vacuolar Membrane Channel

Rapid bidirectional movement of water across biological membranes cannot occur at sufficient rates via simple diffusion through the lipid bilayer alone. The tonoplast (vacuolar membrane) contains specialized water channel proteins called aquaporins (specifically Tonoplast Intrinsic Proteins, or TIPs) that facilitate high-capacity passive water flux.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student subtracts pressure potential from solute potential instead of adding them, yielding an incorrect cell water potential and reversing the predicted water flow.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    ψw=ψs−ψp=−0.90 MPa−0.50 MPa=−1.40 MPa\psi_w = \psi_s - \psi_p = -0.90\text{ MPa} - 0.50\text{ MPa} = -1.40\text{ MPa}

    Correct

    ψw,cell=ψs+ψp=−0.90 MPa+0.50 MPa=−0.40 MPa\psi_{w,\text{cell}} = \psi_s + \psi_p = -0.90\text{ MPa} + 0.50\text{ MPa} = -0.40\text{ MPa}

    You subtracted the pressure potential ψp\psi_p rather than adding it. Physical turgor pressure pushes outward against the cell wall, increasing the free energy and water potential of the internal water, so the correct formula is ψw=ψs+ψp\psi_w = \psi_s + \psi_p.

  2. Step 2

    ψw,ext=−0.75 MPa  ⟹  Since −1.40 MPa is lower than −0.75 MPa, water moves into the cell.\psi_{w,\text{ext}} = -0.75\text{ MPa} \implies \text{Since } -1.40\text{ MPa} \text{ is lower than } -0.75\text{ MPa},\text{ water moves into the cell.}

    Correct

    ψw,ext=−0.75 MPa  ⟹  Since ψw,cell  (−0.40 MPa)>ψw,ext  (−0.75 MPa), water moves out of the cell.\psi_{w,\text{ext}} = -0.75\text{ MPa} \implies \text{Since } \psi_{w,\text{cell}}\;(-0.40\text{ MPa}) > \psi_{w,\text{ext}}\;(-0.75\text{ MPa}),\text{ water moves out of the cell.}

    Your reasoning that water flows from higher to lower water potential is correct, but because the cell's initial water potential was calculated incorrectly in Step 1, your predicted flow direction is reversed.

  3. Step 3

    Aquaporins\text{Aquaporins}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that the external water potential is −0.75 MPa-0.75\text{ MPa}.

You correctly applied the fundamental thermodynamic principle that water moves from higher water potential to lower water potential.

You correctly identified aquaporins as the protein channels responsible for rapid water movement across the vacuolar membrane.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Sign Error in Water Potential Formula

You wrote ψw=ψs−ψp\psi_w = \psi_s - \psi_p instead of ψw=ψs+ψp\psi_w = \psi_s + \psi_p, treating turgor pressure as a factor that decreases water potential.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Conflating the opposing signs of solute potential (which is negative and lowers water potential) and positive turgor pressure (which increases water potential by exerting mechanical force). Because ψp\psi_p increases free energy, it must always be added to ψs\psi_s.

REASONING PATH
Your ACEpath teacher’s suggested approach
Water Potential Components
  • ψw=ψs+ψp\psi_w = \psi_s + \psi_p, where ψs≤0\psi_s \le 0 and turgid plant cells have ψp>0\psi_p > 0.

  • Always add solute potential and pressure potential algebraically; never subtract ψp\psi_p.

Direction of Osmotic Flow
  • Water moves spontaneously from higher (less negative) ψw\psi_w to lower (more negative) ψw\psi_w.

  • Compare the values algebraically on a number line: −0.40 MPa>−0.75 MPa-0.40\text{ MPa} > -0.75\text{ MPa}, so water exits the cell.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Apply the additive water potential equation: ψw,cell=ψs+ψp=−0.90 MPa+0.50 MPa=−0.40 MPa\psi_{w,\text{cell}} = \psi_s + \psi_p = -0.90\text{ MPa} + 0.50\text{ MPa} = -0.40\text{ MPa}.

  2. Compare cell and external potentials: ψw,cell  (−0.40 MPa)>ψw,ext  (−0.75 MPa)\psi_{w,\text{cell}}\;(-0.40\text{ MPa}) > \psi_{w,\text{ext}}\;(-0.75\text{ MPa}).

  3. Conclude direction of net movement: Water moves down its potential gradient, flowing out of the cell into the hypertonic external solution, leading to loss of turgor (plasmolysis).

Final answer

ψw,cell=−0.40 MPa\psi_{w,\text{cell}} = -0.40\text{ MPa}; Net water movement is outward (from the cell into the external solution); Aquaporins (Tonoplast Intrinsic Proteins, TIPs).

NEXT STEPS
Final Takeaways from Your Teacher
  • Memorize the foundational formula ψw=ψs+ψp\psi_w = \psi_s + \psi_p as a direct sum of components.

  • Practice comparing negative decimal values on a number line to avoid misidentifying the gradient direction.

  • Review the specific physiological roles of tonoplast intrinsic proteins (TIPs) versus plasma membrane intrinsic proteins (PIPs).

OverviewACEpath Teacher's Diagnosis

02 The student confuses more negative water potential with higher potential, concluding that water moves from the lower external potential into the cell.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    ψw=ψs+ψp=−0.90 MPa+0.50 MPa=−0.40 MPa  ⟹  ψw,ext=−0.75 MPa+0 MPa=−0.75 MPa\psi_w = \psi_s + \psi_p = -0.90\text{ MPa} + 0.50\text{ MPa} = -0.40\text{ MPa} \implies \psi_{w,\text{ext}} = -0.75\text{ MPa} + 0\text{ MPa} = -0.75\text{ MPa}

  2. Step 2

    Water moves from −0.75 MPa to −0.40 MPa, so net flow is into the cell.\text{Water moves from } -0.75\text{ MPa} \text{ to } -0.40\text{ MPa}\text{, so net flow is into the cell.}

    Correct

    Since ψw,cell(−0.40 MPa)>ψw,ext(−0.75 MPa), net water movement is outward (from the cell into the external bath).\text{Since } \psi_{w,\text{cell}} (-0.40\text{ MPa}) > \psi_{w,\text{ext}} (-0.75\text{ MPa})\text{, net water movement is outward (from the cell into the external bath).}

    Water always moves spontaneously from a region of higher (less negative) water potential to a region of lower (more negative) water potential. Because −0.40>−0.75-0.40 > -0.75, the cell has a higher water potential than the external solution, so water flows out of the cell.

  3. Step 3

    Aquaporins\text{Aquaporins}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly applied the water potential formula ψw=ψs+ψp\psi_w = \psi_s + \psi_p to calculate both internal and external potentials.

You correctly identified aquaporins as the membrane channels mediating rapid water movement.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Negative Number Water Potential Comparison Error

You treated −0.75 MPa-0.75\text{ MPa} as having a higher water potential than −0.40 MPa-0.40\text{ MPa}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You compared the magnitudes (0.75>0.400.75 > 0.40) without accounting for the negative sign, mistaking a more negative value for a higher water potential.

REASONING PATH
Your ACEpath teacher’s suggested approach
Water Potential Directionality Rule
  • Water always flows spontaneously from higher ψw\psi_w (less negative / closer to zero) to lower ψw\psi_w (more negative).

  • Plot or visualize both values on a standard number line before determining the direction of flow: the value further to the right is always higher.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Compare the calculated potentials: ψw,cell=−0.40 MPa\psi_{w,\text{cell}} = -0.40\text{ MPa} and ψw,ext=−0.75 MPa\psi_{w,\text{ext}} = -0.75\text{ MPa}.

  2. Identify which potential is higher: on a number line, −0.40>−0.75-0.40 > -0.75.

  3. Apply the principle of osmosis: water moves down its free energy gradient from higher potential to lower potential, flowing out of the cell and into the external solution.

Final answer

ψw,cell=−0.40 MPa\psi_{w,\text{cell}} = -0.40\text{ MPa}, ψw,ext=−0.75 MPa\psi_{w,\text{ext}} = -0.75\text{ MPa}; Net water movement is outward (from the cell into the external solution); The channel proteins are aquaporins (tonoplast intrinsic proteins, TIPs).

NEXT STEPS
Final Takeaways from Your Teacher
  • Draw a quick horizontal number line whenever comparing negative water potentials to clearly see which value is closer to zero.

  • Practice identifying hypertonic vs. hypotonic environments by comparing total ψw\psi_w rather than solute concentrations alone.

OverviewACEpath Teacher's Diagnosis

03 The student names the whole organelle membrane rather than the specific protein channel structure regulating rapid water flux.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    ψw=ψs+ψp=−0.90 MPa+0.50 MPa=−0.40 MPa  ⟹  ψw,ext=−0.75 MPa\psi_w = \psi_s + \psi_p = -0.90\text{ MPa} + 0.50\text{ MPa} = -0.40\text{ MPa} \implies \psi_{w,\text{ext}} = -0.75\text{ MPa}

  2. Step 2

    Water moves outward from the cell into the sucrose bath.

  3. Step 3

    Tonoplast

    Correct

    Aquaporin (specifically Tonoplast Intrinsic Protein, or TIP)

    The tonoplast is the vacuolar membrane itself. The question asked for the specific transport structure within that membrane responsible for rapid bidirectional water flux, which is an aquaporin channel protein.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the initial water potential of the plant cell using the water potential equation.

You correctly determined the direction of net water movement based on the water potential gradient.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Organelle membrane vs. channel protein confusion

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You identified the entire biological boundary (the tonoplast membrane) rather than the specialized channel protein complex (aquaporin/TIP) embedded within it that mediates high-capacity, facilitated diffusion of water.

REASONING PATH
Your ACEpath teacher’s suggested approach
Distinguish Membrane Boundaries from Integral Transport Proteins
  • Biological membranes (such as the plasma membrane or tonoplast) provide selective permeability, but rapid bidirectional water transport requires specialized channel proteins called aquaporins.

  • When an exam question asks for a membrane 'structure' or 'channel' regulating rapid fluid movement, name the transport protein (aquaporin/TIP), not the lipid bilayer membrane.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Recall that simple diffusion of water across the phospholipid bilayer of the tonoplast is too slow to account for rapid osmotic changes during turgor adjustments.

  2. Identify the integral membrane proteins facilitating passive water flux across the tonoplast: aquaporins, specifically Tonoplast Intrinsic Proteins (TIPs).

Final answer

ψw,cell=−0.40 MPa\psi_{w,\text{cell}} = -0.40\text{ MPa}, ψw,ext=−0.75 MPa\psi_{w,\text{ext}} = -0.75\text{ MPa}; Net water movement is outward; The specific membrane structures are aquaporins (Tonoplast Intrinsic Proteins, TIPs).

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the distinction between whole cellular boundaries (e.g., tonoplast, plasma membrane) and the specific transport proteins (e.g., aquaporins, proton pumps) embedded within them.

  • Practice identifying the physiological roles of Tonoplast Intrinsic Proteins (TIPs) versus Plasma Membrane Intrinsic Proteins (PIPs).

Lock it in

Similar question

01

A flaccid plant cell with ψs=−0.65 MPa\psi_s = -0.65\text{ MPa} and ψp=0 MPa\psi_p = 0\text{ MPa} is placed in a beaker of sucrose solution with ψs=−0.25 MPa\psi_s = -0.25\text{ MPa} open to the atmosphere. Calculate ψw,cell\psi_{w,\text{cell}}, ψw,sol\psi_{w,\text{sol}}, and determine the initial direction of net water movement.

Answer

ψw,cell=−0.65 MPa+0 MPa=−0.65 MPa\psi_{w,\text{cell}} = -0.65\text{ MPa} + 0\text{ MPa} = -0.65\text{ MPa}; ψw,sol=−0.25 MPa+0 MPa=−0.25 MPa\psi_{w,\text{sol}} = -0.25\text{ MPa} + 0\text{ MPa} = -0.25\text{ MPa}. Since ψw,sol  (−0.25 MPa)>ψw,cell  (−0.65 MPa)\psi_{w,\text{sol}}\;(-0.25\text{ MPa}) > \psi_{w,\text{cell}}\;(-0.65\text{ MPa}), net water moves into the cell.

02

A plant cell reaches dynamic equilibrium with an open external solution having ψs=−0.45 MPa\psi_s = -0.45\text{ MPa}. If the internal solute potential of the cell at equilibrium is ψs=−0.85 MPa\psi_s = -0.85\text{ MPa}, calculate the turgor pressure (ψp\psi_p) developed inside the cell.

Answer

At equilibrium, ψw,cell=ψw,ext=−0.45 MPa\psi_{w,\text{cell}} = \psi_{w,\text{ext}} = -0.45\text{ MPa}. Using ψw=ψs+ψp\psi_w = \psi_s + \psi_p: −0.45 MPa=−0.85 MPa+ψp  ⟹  ψp=−0.45 MPa−(−0.85 MPa)=+0.40 MPa-0.45\text{ MPa} = -0.85\text{ MPa} + \psi_p \implies \psi_p = -0.45\text{ MPa} - (-0.85\text{ MPa}) = +0.40\text{ MPa}.

03

Two plant cells, A and B, are adjacent to each other. Cell A has ψs=−0.80 MPa\psi_s = -0.80\text{ MPa} and ψp=0.50 MPa\psi_p = 0.50\text{ MPa}. Cell B has ψs=−0.70 MPa\psi_s = -0.70\text{ MPa} and ψp=0.20 MPa\psi_p = 0.20\text{ MPa}. Calculate the water potential of both cells, identify which cell has the higher water potential, and state the direction of net water flow between them.

Answer

For Cell A: ψw,A=−0.80 MPa+0.50 MPa=−0.30 MPa\psi_{w,\text{A}} = -0.80\text{ MPa} + 0.50\text{ MPa} = -0.30\text{ MPa}. For Cell B: ψw,B=−0.70 MPa+0.20 MPa=−0.50 MPa\psi_{w,\text{B}} = -0.70\text{ MPa} + 0.20\text{ MPa} = -0.50\text{ MPa}. Cell A has the higher water potential (−0.30 MPa>−0.50 MPa-0.30\text{ MPa} > -0.50\text{ MPa}), so net water flows from Cell A into Cell B.

Loading workspace…