Resources

An intravenous antibiotic infusion of ampicillin sodium is prepared for a pediatric patient diagnosed with Listeria monocytogenes meningitis. The target steady-state serum concentration is Css=40.0 μg/mLC_{\text{ss}} = 40.0\,\mu\text{g/mL}. (a) Convert this target concentration to standard SI units of mg/L\text{mg/L} and mol/m3\text{mol/m}^3 (given the molar mass of ampicillin sodium is M=371.39 g/molM = 371.39\text{ g/mol}). (b) An antiviral formulation of acyclovir (M=225.21 g/molM = 225.21\text{ g/mol}) is prescribed for herpes simplex encephalitis at a dosage yielding Css=44.4 μmol/LC_{\text{ss}} = 44.4\,\mu\text{mol/L}. Convert the acyclovir concentration to mg/L\text{mg/L}. (c) Contrast the fundamental molecular targets of ampicillin and acyclovir in their respective pathogenic systems.

Answer and steps

Final answer

(a) 40.0 μg/mL=40.0 mg/L40.0\,\mu\text{g/mL} = 40.0\text{ mg/L}. In mol/m3\text{mol/m}^3: 40.0 mg/L371.39 g/mol=0.1077 mmol/L=0.108 mol/m3\frac{40.0\text{ mg/L}}{371.39\text{ g/mol}} = 0.1077\text{ mmol/L} = 0.108\text{ mol/m}^3. (b) For acyclovir: (44.4×10−6 mol/L)×(225.21 g/mol)=1.00×10−2 g/L=10.0 mg/L(44.4 \times 10^{-6}\text{ mol/L}) \times (225.21\text{ g/mol}) = 1.00 \times 10^{-2}\text{ g/L} = 10.0\text{ mg/L}. (c) Ampicillin targets the bacterial cell wall by inhibiting transpeptidase enzymes required for peptidoglycan cross-linking, whereas acyclovir is a guanosine nucleoside analog that selectively inhibits viral DNA polymerase following phosphorylation by viral thymidine kinase.

Steps

Part (a): Converting Ampicillin Concentration to mg/L\text{mg/L} and mol/m3\text{mol/m}^3

  1. Convert μg/mL\mu\text{g/mL} to mg/L\text{mg/L}: The prefix micro (μ\mu) denotes 10−610^{-6} and milli (m\text{m}) denotes 10−310^{-3}. Converting both the numerator and denominator: 40.0 μg/mL=40.0×10−6 g10−3 L=40.0×10−3 g/L=40.0 mg/L40.0\,\mu\text{g/mL} = \frac{40.0 \times 10^{-6}\text{ g}}{10^{-3}\text{ L}} = 40.0 \times 10^{-3}\text{ g/L} = 40.0\text{ mg/L} Therefore, 1 μg/mL1\,\mu\text{g/mL} is directly equivalent to 1 mg/L1\text{ mg/L}.
  2. Convert to mol/m3\text{mol/m}^3: First, determine the molar concentration in mol/L\text{mol/L} using the molar mass of ampicillin sodium (M=371.39 g/molM = 371.39\text{ g/mol}): Molarity=40.0×10−3 g/L371.39 g/mol≈1.077×10−4 mol/L=0.1077 mmol/L\text{Molarity} = \frac{40.0 \times 10^{-3}\text{ g/L}}{371.39\text{ g/mol}} \approx 1.077 \times 10^{-4}\text{ mol/L} = 0.1077\text{ mmol/L} Next, convert liters to cubic meters using the volume relationship 1 m3=1000 L1\text{ m}^3 = 1000\text{ L}: Concentration in mol/m3=(1.077×10−4 mol/L)×(1000 L1 m3)=0.1077 mol/m3≈0.108 mol/m3\text{Concentration in mol/m}^3 = (1.077 \times 10^{-4}\text{ mol/L}) \times \left(\frac{1000\text{ L}}{1\text{ m}^3}\right) = 0.1077\text{ mol/m}^3 \approx 0.108\text{ mol/m}^3 (Note that numerically, 1 mmol/L=1 mol/m31\text{ mmol/L} = 1\text{ mol/m}^3.)

Part (b): Converting Acyclovir Concentration to mg/L\text{mg/L}

  1. Calculate mass concentration from molarity: The concentration is given as 44.4 μmol/L=44.4×10−6 mol/L44.4\,\mu\text{mol/L} = 44.4 \times 10^{-6}\text{ mol/L}, and the molar mass is M=225.21 g/molM = 225.21\text{ g/mol}: Mass concentration (g/L)=(44.4×10−6 mol/L)×225.21 g/mol≈1.00×10−2 g/L\text{Mass concentration (g/L)} = (44.4 \times 10^{-6}\text{ mol/L}) \times 225.21\text{ g/mol} \approx 1.00 \times 10^{-2}\text{ g/L}
  2. Convert grams to milligrams: Mass concentration (mg/L)=(1.00×10−2 g/L)×(1000 mg1 g)=10.0 mg/L\text{Mass concentration (mg/L)} = (1.00 \times 10^{-2}\text{ g/L}) \times \left(\frac{1000\text{ mg}}{1\text{ g}}\right) = 10.0\text{ mg/L}

Part (c): Molecular Targets of Ampicillin vs. Acyclovir

The distinct molecular targets reflect the biological differences between cellular bacteria and obligate intracellular viruses:

  • Ampicillin (Antibacterial):
    • Targets the bacterial cell wall.
    • It is a β\beta-lactam antibiotic that competitively binds to and inhibits penicillin-binding proteins (PBPs), specifically transpeptidase enzymes.
    • This blocks the final cross-linking step of peptidoglycan chains, weakening the bacterial cell wall and causing osmotic lysis and cell death in actively dividing bacteria like Listeria monocytogenes.
  • Acyclovir (Antiviral):
    • Targets viral nucleic acid replication.
    • It is an acyclic guanosine nucleoside analog. Inside infected cells, it is initially selectively monophosphorylated by viral thymidine kinase (a step that does not occur efficiently in uninfected host cells) and subsequently converted to acyclovir triphosphate by cellular kinases.
    • Acyclovir triphosphate competitively inhibits viral DNA polymerase and incorporates into the nascent viral DNA chain, causing immediate chain termination because it lacks the 3′-OH3'\text{-OH} group required for further elongation.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student misconverts metric prefixes by multiplying instead of dividing by 1000 when going from milliliters to liters in the denominator, resulting in an ampicillin concentration that is off by a factor of 10⁶.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    40.0 μg/mL=40.0×10−3 mg1000 L=4.00×10−5 mg/L40.0\,\mu\text{g/mL} = \frac{40.0 \times 10^{-3}\text{ mg}}{1000\text{ L}} = 4.00 \times 10^{-5}\text{ mg/L}

    Correct

    40.0 μg/mL=40.0×10−3 mg10−3 L=40.0 mg/L40.0\,\mu\text{g/mL} = \frac{40.0 \times 10^{-3}\text{ mg}}{10^{-3}\text{ L}} = 40.0\text{ mg/L}

    You correctly converted the numerator from micrograms to milligrams (40.0×10−3 mg40.0 \times 10^{-3}\text{ mg}), but you substituted 1 mL=1000 L1\text{ mL} = 1000\text{ L} in the denominator. Since 1 mL=10−3 L=11000 L1\text{ mL} = 10^{-3}\text{ L} = \frac{1}{1000}\text{ L}, dividing by 10−310^{-3} cancels the 10−310^{-3} in the numerator, resulting in 40.0 mg/L40.0\text{ mg/L}.

  2. Step 2

    Concentration=4.00×10−2 mg/m3=4.00×10−5 g/m3  ⟹  Concentration=4.00×10−5 g/m3371.39 g/mol=1.08×10−7 mol/m3\text{Concentration} = 4.00 \times 10^{-2}\text{ mg/m}^3 = 4.00 \times 10^{-5}\text{ g/m}^3 \implies \text{Concentration} = \frac{4.00 \times 10^{-5}\text{ g/m}^3}{371.39\text{ g/mol}} = 1.08 \times 10^{-7}\text{ mol/m}^3

    Correct

    Concentration=40.0×10−3 g/L371.39 g/mol×1000 L1 m3=0.108 mol/m3\text{Concentration} = \frac{40.0 \times 10^{-3}\text{ g/L}}{371.39\text{ g/mol}} \times \frac{1000\text{ L}}{1\text{ m}^3} = 0.108\text{ mol/m}^3

    Your conversion procedure using the molar mass (371.39 g/mol371.39\text{ g/mol}) and the volume relationship 1 m3=1000 L1\text{ m}^3 = 1000\text{ L} was logically correct, but the final numerical value was affected by the erroneous concentration from Step 1.

  3. Step 3

    44.4 μmol/L×225.21 g/mol=10000 μg/L=10.0 mg/L44.4\,\mu\text{mol/L} \times 225.21\text{ g/mol} = 10000\,\mu\text{g/L} = 10.0\text{ mg/L}

  4. Step 4

    Ampicillin inhibits penicillin-binding proteins involved in bacterial peptidoglycan cell wall synthesis. ⟹ Acyclovir inhibits viral DNA polymerase, terminating viral DNA replication.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the distinct biological targets of ampicillin and acyclovir.

You accurately converted acyclovir's molar concentration into mass concentration in Part (b).

You correctly set up the relationship between molar mass and volume when converting to mol/m3\text{mol/m}^3.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Denominator Metric Prefix Inversion

You wrote 1000 L1000\text{ L} instead of 10−3 L10^{-3}\text{ L} (or 11000 L\frac{1}{1000}\text{ L}) for 1 mL1\text{ mL} in the denominator.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing prefix scaling when converting denominator units: because 1 L=1000 mL1\text{ L} = 1000\text{ mL}, substituting for mL\text{mL} requires replacing mL\text{mL} with 10−3 L10^{-3}\text{ L} (or dividing the denominator by 1000, which multiplies the overall fraction by 1000).

REASONING PATH
Your ACEpath teacher’s suggested approach
Denominator Unit Substitution
  • When replacing a unit in a denominator, substitute its literal equivalent: 1 mL=10−3 L=11000 L1\text{ mL} = 10^{-3}\text{ L} = \frac{1}{1000}\text{ L}.

  • Write out the fraction with explicit units or use conversion factors where units cancel: 1 μg1 mL×1 mg103 μg×103 mL1 L=1 mg/L\frac{1\,\mu\text{g}}{1\text{ mL}} \times \frac{1\text{ mg}}{10^3\,\mu\text{g}} \times \frac{10^3\text{ mL}}{1\text{ L}} = 1\text{ mg/L}.

Equivalence Shortcut
  • Because 1 μg=10−3 mg1\,\mu\text{g} = 10^{-3}\text{ mg} and 1 mL=10−3 L1\text{ mL} = 10^{-3}\text{ L}, the ratio μg/mL\mu\text{g/mL} is directly equal to mg/L\text{mg/L}.

  • Remember the standard biomedical identity: 1 μg/mL=1 mg/L=1 g/m31\,\mu\text{g/mL} = 1\text{ mg/L} = 1\text{ g/m}^3.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert 40.0 μg/mL40.0\,\mu\text{g/mL} using identical scaling in numerator and denominator: 40.0 μg/mL=40.0×10−3 mg10−3 L=40.0 mg/L40.0\,\mu\text{g/mL} = \frac{40.0 \times 10^{-3}\text{ mg}}{10^{-3}\text{ L}} = 40.0\text{ mg/L}.

  2. Convert mass concentration to molarity: Molarity=40.0×10−3 g/L371.39 g/mol≈1.077×10−4 mol/L\text{Molarity} = \frac{40.0 \times 10^{-3}\text{ g/L}}{371.39\text{ g/mol}} \approx 1.077 \times 10^{-4}\text{ mol/L}.

  3. Convert mol/L\text{mol/L} to standard SI units of mol/m3\text{mol/m}^3 using 1 m3=1000 L1\text{ m}^3 = 1000\text{ L}: (1.077×10−4 mol/L)×(1000 L1 m3)=0.1077 mol/m3≈0.108 mol/m3(1.077 \times 10^{-4}\text{ mol/L}) \times \left(\frac{1000\text{ L}}{1\text{ m}^3}\right) = 0.1077\text{ mol/m}^3 \approx 0.108\text{ mol/m}^3.

Final answer

(a) 40.0 mg/L40.0\text{ mg/L} and 0.108 mol/m30.108\text{ mol/m}^3; (b) 10.0 mg/L10.0\text{ mg/L}; (c) Ampicillin targets bacterial cell wall peptidoglycan cross-linking via transpeptidase inhibition; acyclovir targets viral replication via viral DNA polymerase inhibition.

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice converting compound units using dimensional analysis factor cancellation rather than direct algebraic substitution into denominators.

  • Memorize common clinical concentration identities, particularly 1 μg/mL=1 mg/L1\,\mu\text{g/mL} = 1\text{ mg/L} and 1 mmol/L=1 mol/m31\text{ mmol/L} = 1\text{ mol/m}^3.

OverviewACEpath Teacher's Diagnosis

02 The student confuses molarity with mass concentration and divides by molar mass instead of multiplying when converting acyclovir micromoles to milligrams.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    40.0 μg/mL=40.0 mg/L=40.0 g/m3  ⟹  40.0/371.39=0.108 mol/m340.0\,\mu\text{g/mL} = 40.0\text{ mg/L} = 40.0\text{ g/m}^3 \implies 40.0 / 371.39 = 0.108\text{ mol/m}^3

  2. Step 2

    Mass=(44.4 μmol/L)/(225.21 g/mol)=0.197  ⟹  Concentration=0.197 mg/L\text{Mass} = (44.4\,\mu\text{mol/L}) / (225.21\text{ g/mol}) = 0.197 \implies \text{Concentration} = 0.197\text{ mg/L}

    Correct

    Cmass=Cmolar×M=(44.4 μmol/L)×(225.21 g/mol)=1.00×104 μg/L=10.0 mg/LC_{\text{mass}} = C_{\text{molar}} \times M = (44.4\,\mu\text{mol/L}) \times (225.21\text{ g/mol}) = 1.00 \times 10^4\,\mu\text{g/L} = 10.0\text{ mg/L}

    To convert from molar concentration (moles per liter) to mass concentration (mass per liter), you must multiply by molar mass (m=n×Mm = n \times M), not divide.

  3. Step 3

    Ampicillin targets bacterial transpeptidases (PBPs) in the cell wall. Acyclovir targets viral DNA polymerase to inhibit viral replication.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly handled metric prefix cancellations to convert μg/mL\mu\text{g/mL} directly into mg/L\text{mg/L} and mol/m3\text{mol/m}^3.

You demonstrated a solid understanding of pharmacology by correctly naming the transpeptidase and DNA polymerase targets for each antimicrobial agent.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Dimensional Analysis Inversion

You divided the molar concentration by molar mass instead of multiplying when converting acyclovir from micromoles to milligrams.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the direction of dimensional analysis when converting between amount of substance (nn) and mass (mm): calculating mass requires multiplying moles by grams per mole (m=n×Mm = n \times M).

REASONING PATH
Your ACEpath teacher’s suggested approach
Unit Dimensional Verification
  • Mass concentration (g/L)=Molar concentration (mol/L)×Molar mass (g/mol)\text{Mass concentration (g/L)} = \text{Molar concentration (mol/L)} \times \text{Molar mass (g/mol)}.

  • Always write out full dimensional units: molL×gmol=gL\frac{\text{mol}}{\text{L}} \times \frac{\text{g}}{\text{mol}} = \frac{\text{g}}{\text{L}}. If you divide, the units become mol2g⋅L\frac{\text{mol}^2}{\text{g}\cdot\text{L}}, which indicates an inverted operation.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the given molarity: Cmolar=44.4 μmol/L=44.4×10−6 mol/LC_{\text{molar}} = 44.4\,\mu\text{mol/L} = 44.4 \times 10^{-6}\text{ mol/L}.

  2. Multiply by the molar mass (M=225.21 g/molM = 225.21\text{ g/mol}): Cmass=(44.4×10−6 mol/L)×(225.21 g/mol)≈1.00×10−2 g/LC_{\text{mass}} = (44.4 \times 10^{-6}\text{ mol/L}) \times (225.21\text{ g/mol}) \approx 1.00 \times 10^{-2}\text{ g/L}.

  3. Convert grams to milligrams: (1.00×10−2 g/L)×1000 mg/g=10.0 mg/L(1.00 \times 10^{-2}\text{ g/L}) \times 1000\text{ mg/g} = 10.0\text{ mg/L}.

Final answer

10.0 mg/L10.0\text{ mg/L}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice two-way conversions between mol/L\text{mol/L} and g/L\text{g/L} using unit cancellation strips.

  • Verify your resulting physical magnitude: when molar mass is around 200–400 g/mol200\text{--}400\text{ g/mol}, each μmol\mu\text{mol} contributes several tenths of a microgram, meaning numerical mass concentration in mg/L\text{mg/L} is smaller than the numeric value in μmol/L\mu\text{mol/L} by roughly a factor of 10−3×M10^{-3} \times M.

OverviewACEpath Teacher's Diagnosis

03 The student misidentifies ampicillin's mechanism of action by confusing it with antibiotics that target bacterial 70S ribosomes.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    40.0 μg/mL=40.0 mg/L  ⟹  40.0 mg/L=40.0 g/m3  ⟹  40.0371.39=0.108 mol/m340.0\text{ }\mu\text{g/mL} = 40.0\text{ mg/L} \implies 40.0\text{ mg/L} = 40.0\text{ g/m}^3 \implies \frac{40.0}{371.39} = 0.108\text{ mol/m}^3

  2. Step 2

    44.4 μmol/L×225.21 g/mol=10000 μg/L=10.0 mg/L44.4\text{ }\mu\text{mol/L} \times 225.21\text{ g/mol} = 10000\text{ }\mu\text{g/L} = 10.0\text{ mg/L}

  3. Step 3

    Ampicillin binds to the bacterial 50S ribosomal subunit to inhibit protein synthesis.

    Correct

    Ampicillin binds to penicillin-binding proteins (transpeptidases) to inhibit bacterial peptidoglycan cell wall cross-linking.

    Ampicillin is an aminopenicillin (β\beta-lactam antibiotic) that targets bacterial cell wall synthesis by inhibiting transpeptidase enzymes, not bacterial 50S ribosomes (which are targeted by macrolides, chloramphenicol, and lincosamides).

  4. Step 4

    Acyclovir inhibits herpes simplex viral DNA polymerase to block viral DNA synthesis.

WHAT YOU DID WELL
Compliments from Your Teacher

You performed all metric and molar concentration calculations flawlessly with proper rounding and units.

You correctly identified herpes simplex viral DNA polymerase as the target of acyclovir.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Antibiotic Target Misclassification

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused the molecular target of β\beta-lactam antibiotics (cell wall transpeptidases) with the target of 50S ribosomal translation inhibitors.

REASONING PATH
Your ACEpath teacher’s suggested approach
Categorizing Major Antibiotic Classes by Target
  • β\beta-lactams (penicillins, cephalosporins, carbapenems) and glycopeptides (vancomycin) target peptidoglycan cell wall synthesis. Macrolides, lincosamides, and chloramphenicol target the 50S ribosomal subunit, while aminoglycosides and tetracyclines target the 30S subunit.

  • Always identify the drug suffix or core class first (-cillin = β\beta-lactam) before assigning its cellular target (cell wall vs. 30S/50S ribosome vs. nucleic acid synthesis).

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify ampicillin's pharmacologic class: an aminopenicillin belonging to the β\beta-lactam family.

  2. Determine the cellular target of β\beta-lactams: penicillin-binding proteins (PBPs), specifically transpeptidase enzymes in the bacterial cell wall.

  3. State the downstream physiological consequence: transpeptidation is blocked, halting peptidoglycan cross-linking and leading to osmotic lysis of dividing bacteria.

Final answer

Ampicillin inhibits transpeptidases (penicillin-binding proteins) to prevent peptidoglycan cross-linking in the bacterial cell wall, whereas acyclovir selectively inhibits viral DNA polymerase (after activation by viral thymidine kinase) to terminate viral DNA synthesis.

NEXT STEPS
Final Takeaways from Your Teacher
  • Create a two-column reference table grouping major antibacterial drug classes by their cellular targets (Cell Wall, 30S Ribosome, 50S Ribosome, DNA/RNA Synthesis, and Folic Acid Synthesis).

  • Practice distinguishing antiviral mechanisms (e.g., nucleoside analog chain terminators, protease inhibitors) from bacterial cell-wall and protein-synthesis inhibitors.

Lock it in

Similar question

01

A third-generation cephalosporin has a peak plasma concentration of Cmax=65.0 μg/mLC_{\text{max}} = 65.0\,\mu\text{g/mL}. Convert this concentration to: (a) mg/L\text{mg/L}, and (b) mol/m3\text{mol/m}^3, given that its molar mass is 455.47 g/mol455.47\text{ g/mol}.

Answer

(a) 65.0 mg/L65.0\text{ mg/L}. Step: 65.0 μg/mL=65.0×10−3 mg10−3 L=65.0 mg/L65.0\,\mu\text{g/mL} = \frac{65.0 \times 10^{-3}\text{ mg}}{10^{-3}\text{ L}} = 65.0\text{ mg/L}. (b) 0.143 mol/m30.143\text{ mol/m}^3. Step: 65.0×10−3 g/L455.47 g/mol×1000 L1 m3=0.1427 mol/m3≈0.143 mol/m3\frac{65.0 \times 10^{-3}\text{ g/L}}{455.47\text{ g/mol}} \times \frac{1000\text{ L}}{1\text{ m}^3} = 0.1427\text{ mol/m}^3 \approx 0.143\text{ mol/m}^3.

02

A pediatric patient receives vancomycin with a targeted trough serum concentration of 15.0 mg/L15.0\text{ mg/L}. (a) Express this concentration in μg/mL\mu\text{g/mL}. (b) If vancomycin has a molar mass of 1449.3 g/mol1449.3\text{ g/mol}, calculate the concentration in μmol/L\mu\text{mol/L}.

Answer

(a) 15.0 μg/mL15.0\,\mu\text{g/mL}. Step: 1 mg/L=1 μg/mL1\text{ mg/L} = 1\,\mu\text{g/mL}. (b) 10.4 μmol/L10.4\,\mu\text{mol/L}. Step: 15.0×10−3 g/L1449.3 g/mol=1.035×10−5 mol/L=10.35 μmol/L≈10.4 μmol/L\frac{15.0 \times 10^{-3}\text{ g/L}}{1449.3\text{ g/mol}} = 1.035 \times 10^{-5}\text{ mol/L} = 10.35\,\mu\text{mol/L} \approx 10.4\,\mu\text{mol/L}.

03

An antiviral drug solution of ganciclovir (M=255.23 g/molM = 255.23\text{ g/mol}) has a concentration of 20.0 μmol/L20.0\,\mu\text{mol/L}, while an antibacterial solution of meropenem (M=383.46 g/molM = 383.46\text{ g/mol}) has a concentration of 10.0 μg/mL10.0\,\mu\text{g/mL}. Determine which solution has a higher mass concentration in mg/L\text{mg/L}, and state the ratio of meropenem concentration to ganciclovir concentration.

Answer

Meropenem has the higher concentration; ratio is approximately 1.96:11.96 : 1. Steps: Ganciclovir mass concentration =(20.0×10−6 mol/L)×255.23 g/mol=5.105×10−3 g/L=5.105 mg/L= (20.0 \times 10^{-6}\text{ mol/L}) \times 255.23\text{ g/mol} = 5.105 \times 10^{-3}\text{ g/L} = 5.105\text{ mg/L}. Meropenem mass concentration =10.0 μg/mL=10.0 mg/L= 10.0\,\mu\text{g/mL} = 10.0\text{ mg/L}. Ratio =10.05.105≈1.96= \frac{10.0}{5.105} \approx 1.96.

Loading workspace…