Resources

Water movement across cellular membranes is governed by water potential: Ψ=Ψs+Ψp\Psi = \Psi_s + \Psi_p, where Ψs\Psi_s is solute potential and Ψp\Psi_p is pressure potential. An animal cell lacking a cell wall cannot sustain a positive hydrostatic turgor pressure (Ψp=0 MPa\Psi_p = 0\text{ MPa} permanently); if placed in pure water (Ψ=0 MPa\Psi = 0\text{ MPa}), water enters until the plasma membrane lyses. Conversely, a mature plant cell with an internal solute potential Ψs=−0.75 MPa\Psi_s = -0.75\text{ MPa} is bathed in an open beaker of an aqueous sucrose solution having Ψs=−0.20 MPa\Psi_s = -0.20\text{ MPa}. Assuming equilibrium is reached without any net change in cell volume, calculate the equilibrium turgor pressure (Ψp\Psi_p) within the plant cell. Contrast the sign and magnitude of Ψp\Psi_p between the fully turgid plant cell and the bathed animal cell.

Answer and steps

Final answer

Equilibrium turgor pressure of the plant cell is Ψp=+0.55 MPa\Psi_p = +0.55\text{ MPa}; for the plant cell Ψp>0\Psi_p > 0 (+0.55 MPa+0.55\text{ MPa} supported by the rigid cell wall), whereas for the open animal cell Ψp=0 MPa\Psi_p = 0\text{ MPa} (animal cells cannot generate positive hydrostatic turgor pressure without lysing).

Steps

01

Water Potential of the Surrounding Solution

The overall water potential (Ψ\Psi) of any system is the sum of its solute potential (Ψs\Psi_s) and physical pressure potential (Ψp\Psi_p):

Ψ=Ψs+Ψp\Psi = \Psi_s + \Psi_p

Because the surrounding sucrose solution is in an open beaker exposed to atmospheric pressure, its pressure potential is zero (Ψp,solution=0 MPa\Psi_{p,\text{solution}} = 0\text{ MPa}). Therefore, the total water potential of the external solution is:

Ψsolution=Ψs,solution+Ψp,solution=−0.20 MPa+0 MPa=−0.20 MPa\Psi_{\text{solution}} = \Psi_{s,\text{solution}} + \Psi_{p,\text{solution}} = -0.20\text{ MPa} + 0\text{ MPa} = -0.20\text{ MPa}


02

Calculating the Plant Cell's Equilibrium Turgor Pressure (Ψp\Psi_p)

At dynamic equilibrium, net water movement ceases because the water potential inside the plant cell equals that of the external solution:

Ψcell=Ψsolution=−0.20 MPa\Psi_{\text{cell}} = \Psi_{\text{solution}} = -0.20\text{ MPa}

Given that cell volume changes are negligible, the cell's internal solute potential remains Ψs,cell=−0.75 MPa\Psi_{s,\text{cell}} = -0.75\text{ MPa}. We solve for the internal pressure potential (turgor pressure, Ψp\Psi_p):

Ψcell=Ψs,cell+Ψp,cell\Psi_{\text{cell}} = \Psi_{s,\text{cell}} + \Psi_{p,\text{cell}}

−0.20 MPa=−0.75 MPa+Ψp,cell-0.20\text{ MPa} = -0.75\text{ MPa} + \Psi_{p,\text{cell}}

Ψp,cell=−0.20 MPa−(−0.75 MPa)=+0.55 MPa\Psi_{p,\text{cell}} = -0.20\text{ MPa} - (-0.75\text{ MPa}) = +0.55\text{ MPa}


03

Contrasting Plant and Animal Cell Pressure Potentials

  • Plant Cell (Ψp=+0.55 MPa\Psi_p = +0.55\text{ MPa}): The pressure potential has a positive sign and a nonzero magnitude (+0.55 MPa+0.55\text{ MPa}). Water entering the hypertonic cytoplasm pushes outward against the plasma membrane, but the rigid, inelastic cellulose cell wall pushes back with an equal and opposite wall pressure. This enables the plant cell to withstand significant internal hydrostatic pressure without rupturing (lysing).
  • Animal Cell (Ψp=0 MPa\Psi_p = 0\text{ MPa}): Animal cells lack an outer rigid cell wall, possessing only a flexible plasma membrane. Consequently, they cannot generate or sustain positive hydrostatic pressure (Ψp=0 MPa\Psi_p = 0\text{ MPa}). If placed in a hypotonic environment, osmotic influx increases volume until the membrane ruptures (lysis).

Common Pitfall: Do not confuse solute potential (Ψs\Psi_s) with pressure potential (Ψp\Psi_p). Solute potential is always zero or negative because dissolved solutes decrease free water concentration. In contrast, turgor pressure (Ψp\Psi_p) in living plant cells is typically positive, acting as an opposing force to water entry.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student subtracts the solution solute potential from the cell solute potential instead of setting cell water potential equal to solution water potential, resulting in an erroneous negative turgor pressure.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Ψp=Ψs(cell)−Ψs(solution)  ⟹  Ψp=−0.75 MPa−(−0.20 MPa)=−0.55 MPa\Psi_p = \Psi_s(\text{cell}) - \Psi_s(\text{solution}) \implies \Psi_p = -0.75\text{ MPa} - (-0.20\text{ MPa}) = -0.55\text{ MPa}

    Correct

    Ψcell=Ψsolution  ⟹  Ψs(cell)+Ψp=Ψs(solution)  ⟹  Ψp=−0.20 MPa−(−0.75 MPa)=+0.55 MPa\Psi_{\text{cell}} = \Psi_{\text{solution}} \implies \Psi_s(\text{cell}) + \Psi_p = \Psi_s(\text{solution}) \implies \Psi_p = -0.20\text{ MPa} - (-0.75\text{ MPa}) = +0.55\text{ MPa}

    At equilibrium in an open beaker, Ψcell=Ψsolution=−0.20 MPa\Psi_{\text{cell}} = \Psi_{\text{solution}} = -0.20\text{ MPa}. Because Ψ=Ψs+Ψp\Psi = \Psi_s + \Psi_p, rearranging gives Ψp=Ψsolution−Ψs(cell)\Psi_p = \Psi_{\text{solution}} - \Psi_s(\text{cell}). You inverted the subtraction, which yielded a negative turgor pressure rather than positive wall pressure.

  2. Step 2

    The plant cell has a negative pressure potential of −0.55 MPa-0.55\text{ MPa} while the animal cell has zero pressure potential of 0 MPa0\text{ MPa}.

    Correct

    The plant cell has a positive pressure potential of +0.55 MPa+0.55\text{ MPa} supported by the rigid cell wall, whereas the animal cell has Ψp=0 MPa\Psi_p = 0\text{ MPa} because it lacks a cell wall to resist swelling.

    You correctly stated that the animal cell has a pressure potential of 0 MPa0\text{ MPa}, but your conclusion about the plant cell having negative pressure was carried over from your arithmetic error in Step 1. Living, turgid plant cells maintain positive pressure potential.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that animal cells bathed in solution maintain a pressure potential of Ψp=0 MPa\Psi_p = 0\text{ MPa}.

You recognized that equilibrium relates the internal cell solute potential and the surrounding beaker's solute potential.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Formula Rearrangement Error

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You reversed the equilibrium equation: instead of solving Ψcell=Ψsolution\Psi_{\text{cell}} = \Psi_{\text{solution}} for Ψp=Ψsolution−Ψs(cell)\Psi_p = \Psi_{\text{solution}} - \Psi_s(\text{cell}), you wrote Ψp=Ψs(cell)−Ψs(solution)\Psi_p = \Psi_s(\text{cell}) - \Psi_s(\text{solution}), failing to recognize that turgor pressure in a plant cell pushing against a wall must be positive.

REASONING PATH
Your ACEpath teacher’s suggested approach
Equilibrium Water Potential
  • At dynamic equilibrium, net water movement is zero, meaning Ψinside=Ψoutside\Psi_{\text{inside}} = \Psi_{\text{outside}}.

  • Set Ψs(cell)+Ψp(cell)=Ψsolution\Psi_s(\text{cell}) + \Psi_p(\text{cell}) = \Psi_{\text{solution}} first before isolating Ψp\Psi_p.

Physical Reality of Turgor Pressure
  • Living turgid plant cells have positive hydrostatic pressure (Psip>0\\Psi_p > 0) because the rigid cell wall pushes inward against expanding protoplast volume.

  • Always verify that your calculated turgor pressure in a hypotonic or equilibrium setting is positive.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Equate internal and external water potential at equilibrium: Ψcell=Ψsolution\Psi_{\text{cell}} = \Psi_{\text{solution}}.

  2. Calculate external water potential: in an open container, Ψp=0 MPa\Psi_p = 0\text{ MPa}, so Ψsolution=Ψs(solution)=−0.20 MPa\Psi_{\text{solution}} = \Psi_s(\text{solution}) = -0.20\text{ MPa}.

  3. Substitute into the water potential equation for the cell: Ψs(cell)+Ψp(cell)=−0.20 MPa\Psi_s(\text{cell}) + \Psi_p(\text{cell}) = -0.20\text{ MPa}.

  4. Solve for pressure potential: Ψp(cell)=−0.20 MPa−(−0.75 MPa)=+0.55 MPa\Psi_p(\text{cell}) = -0.20\text{ MPa} - (-0.75\text{ MPa}) = +0.55\text{ MPa}.

Final answer

Equilibrium turgor pressure within the plant cell is Ψp=+0.55 MPa\Psi_p = +0.55\text{ MPa}. The plant cell exhibits a positive pressure potential (+0.55 MPa+0.55\text{ MPa}) sustained by its rigid cellulose wall, whereas the animal cell cannot sustain positive turgor pressure and remains at Ψp=0 MPa\Psi_p = 0\text{ MPa}.

NEXT STEPS
Final Takeaways from Your Teacher
  • Write out the fundamental balance equation Ψcell=Ψsolution\Psi_{\text{cell}} = \Psi_{\text{solution}} before rearranging terms.

  • Check that your final calculated turgor pressure (Psip\\Psi_p) is positive for any cell resisting inward osmotic water flow.

  • Practice identifying pressure potentials for open beakers (Psip=0\\Psi_p = 0) versus walled cells under tension or compression.

OverviewACEpath Teacher's Diagnosis

02 The student confuses the solute potential formula with direct addition of magnitudes or assumes turgor pressure is the sum of both solute potentials, yielding -0.95 MPa.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Ψp=Ψs (cell)+Ψs (solution)  ⟹  Ψp=−0.75 MPa+(−0.20 MPa)=−0.95 MPa\Psi_p = \Psi_s\text{ (cell)} + \Psi_s\text{ (solution)} \implies \Psi_p = -0.75\text{ MPa} + (-0.20\text{ MPa}) = -0.95\text{ MPa}

    Correct

    Ψcell=Ψsolution  ⟹  Ψs,cell+Ψp,cell=Ψs,solution+Ψp,solution  ⟹  −0.75 MPa+Ψp=−0.20 MPa+0 MPa  ⟹  Ψp=+0.55 MPa\Psi_{\text{cell}} = \Psi_{\text{solution}} \implies \Psi_{s,\text{cell}} + \Psi_{p,\text{cell}} = \Psi_{s,\text{solution}} + \Psi_{p,\text{solution}} \implies -0.75\text{ MPa} + \Psi_p = -0.20\text{ MPa} + 0\text{ MPa} \implies \Psi_p = +0.55\text{ MPa}

    You added the two solute potentials together to find pressure potential. At equilibrium, the cell's total water potential equals the solution's total water potential (Ψcell=Ψsolution\Psi_{\text{cell}} = \Psi_{\text{solution}}). Since the open beaker has Ψp,solution=0 MPa\Psi_{p,\text{solution}} = 0\text{ MPa}, we have Ψcell=−0.20 MPa\Psi_{\text{cell}} = -0.20\text{ MPa}, which gives Ψp,cell=Ψcell−Ψs,cell=−0.20−(−0.75)=+0.55 MPa\Psi_{p,\text{cell}} = \Psi_{\text{cell}} - \Psi_{s,\text{cell}} = -0.20 - (-0.75) = +0.55\text{ MPa}.

  2. Step 2

    The plant cell has a negative pressure potential of magnitude 0.95 MPa0.95\text{ MPa}, whereas the animal cell has a pressure potential of 0 MPa0\text{ MPa}.

    Correct

    The fully turgid plant cell has a positive pressure potential of +0.55 MPa+0.55\text{ MPa} supported by its rigid cell wall, whereas the animal cell cannot sustain positive hydrostatic pressure (Ψp=0 MPa\Psi_p = 0\text{ MPa}) without lysing.

    You correctly stated that the animal cell has Ψp=0 MPa\Psi_p = 0\text{ MPa}, but your conclusion about the plant cell having a negative pressure potential stemmed directly from the calculation error in Step 1. Turgor pressure inside a turgid plant cell is positive because the rigid wall resists water influx.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recalled that an animal cell lacking a cell wall cannot maintain positive turgor pressure (Ψp=0 MPa\Psi_p = 0\text{ MPa}).

You correctly identified the two solute potential values given in the problem statement.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Formula Misapplication

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated pressure potential as the sum of internal and external solute potentials rather than applying the dynamic equilibrium condition where total water potentials are equal (Ψcell=Ψsolution\Psi_{\text{cell}} = \Psi_{\text{solution}}).

REASONING PATH
Your ACEpath teacher’s suggested approach
Equilibrium Water Potential Condition
  • At osmotic equilibrium between a cell and an external solution, Ψcell=Ψsolution\Psi_{\text{cell}} = \Psi_{\text{solution}}, where Ψ=Ψs+Ψp\Psi = \Psi_s + \Psi_p.

  • Always set Ψs,cell+Ψp,cell=Ψs,solution+Ψp,solution\Psi_{s,\text{cell}} + \Psi_{p,\text{cell}} = \Psi_{s,\text{solution}} + \Psi_{p,\text{solution}} first before rearranging for the unknown variable.

Physical Sign of Turgor Pressure
  • Turgor pressure (Ψp\Psi_p) in a living, intact plant cell in a hypotonic medium is always positive (Ψp>0\Psi_p > 0) because water pushing against the rigid cell wall creates outward hydrostatic pressure.

  • Check the sign of Ψp\Psi_p: a negative value would mean physical tension or suction (such as in xylem transpiration), which does not occur in a turgid living cell.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Determine the external water potential of the open beaker: Ψsolution=Ψs,solution+Ψp,solution=−0.20 MPa+0 MPa=−0.20 MPa\Psi_{\text{solution}} = \Psi_{s,\text{solution}} + \Psi_{p,\text{solution}} = -0.20\text{ MPa} + 0\text{ MPa} = -0.20\text{ MPa}.

  2. Set the plant cell's water potential equal to the surrounding solution at equilibrium: Ψcell=Ψsolution=−0.20 MPa\Psi_{\text{cell}} = \Psi_{\text{solution}} = -0.20\text{ MPa}.

  3. Use Ψcell=Ψs,cell+Ψp,cell\Psi_{\text{cell}} = \Psi_{s,\text{cell}} + \Psi_{p,\text{cell}} to isolate turgor pressure: Ψp,cell=Ψcell−Ψs,cell=−0.20 MPa−(−0.75 MPa)=+0.55 MPa\Psi_{p,\text{cell}} = \Psi_{\text{cell}} - \Psi_{s,\text{cell}} = -0.20\text{ MPa} - (-0.75\text{ MPa}) = +0.55\text{ MPa}.

Final answer

Equilibrium turgor pressure is Ψp=+0.55 MPa\Psi_p = +0.55\text{ MPa}. The plant cell maintains a positive pressure potential (+0.55 MPa+0.55\text{ MPa}) due to its rigid cell wall, whereas the animal cell cannot sustain positive turgor pressure (Ψp=0 MPa\Psi_p = 0\text{ MPa}) and would lyse in a hypotonic environment.

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the distinction between solute potential Ψs\Psi_s (always ≤0\le 0) and pressure potential Ψp\Psi_p (typically ≥0\ge 0 in living cells).

  • Practice solving water potential problems by explicitly writing the equilibrium identity Ψinside=Ψoutside\Psi_{\text{inside}} = \Psi_{\text{outside}} before substituting terms.

OverviewACEpath Teacher's Diagnosis

03 The student mistakenly treats the surrounding solution as pure water with Ψ = 0 MPa, ignoring the solute potential of the sucrose solution.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Ψcell=0 MPa\Psi_{\text{cell}} = 0\text{ MPa}

    Correct

    Ψcell=Ψsolution=Ψs,solution+Ψp,solution=−0.20 MPa+0 MPa=−0.20 MPa\Psi_{\text{cell}} = \Psi_{\text{solution}} = \Psi_{s,\text{solution}} + \Psi_{p,\text{solution}} = -0.20\text{ MPa} + 0\text{ MPa} = -0.20\text{ MPa}

    At dynamic equilibrium, the cell's water potential equals the water potential of the surrounding solution. Because the open beaker has Ψp=0 MPa\Psi_p = 0\text{ MPa} and Ψs=−0.20 MPa\Psi_s = -0.20\text{ MPa}, the external water potential is −0.20 MPa-0.20\text{ MPa}, not 0 MPa0\text{ MPa}.

  2. Step 2

    Ψs+Ψp=0 MPa  ⟹  −0.75 MPa+Ψp=0 MPa  ⟹  Ψp=0.75 MPa\Psi_s + \Psi_p = 0\text{ MPa} \implies -0.75\text{ MPa} + \Psi_p = 0\text{ MPa} \implies \Psi_p = 0.75\text{ MPa}

    Correct

    −0.75 MPa+Ψp=−0.20 MPa  ⟹  Ψp=−0.20 MPa−(−0.75 MPa)=+0.55 MPa-0.75\text{ MPa} + \Psi_p = -0.20\text{ MPa} \implies \Psi_p = -0.20\text{ MPa} - (-0.75\text{ MPa}) = +0.55\text{ MPa}

    You substituted Ψs=−0.75 MPa\Psi_s = -0.75\text{ MPa} and solved the linear equation correctly, but using 0 MPa0\text{ MPa} instead of −0.20 MPa-0.20\text{ MPa} caused an incorrect turgor pressure of +0.75 MPa+0.75\text{ MPa} instead of +0.55 MPa+0.55\text{ MPa}.

  3. Step 3

    The plant cell has a positive pressure potential of 0.75 MPa0.75\text{ MPa}, while the animal cell has no cell wall and a pressure potential of 0 MPa0\text{ MPa}.

WHAT YOU DID WELL
Compliments from Your Teacher

You remembered and correctly used the core equation Ψ=Ψs+Ψp\Psi = \Psi_s + \Psi_p.

You correctly recognized that animal cells maintain Ψp=0 MPa\Psi_p = 0\text{ MPa} because they lack a rigid cell wall to exert counter-pressure.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
External solution potential omission

You equated the equilibrium state to Ψ=0 MPa\Psi = 0\text{ MPa} instead of calculating the actual water potential of the surrounding sucrose solution.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You conflated dynamic equilibrium (where Ψcell=Ψsolution\Psi_{\text{cell}} = \Psi_{\text{solution}}) with the reference state of pure water at atmospheric pressure (where Ψ=0 MPa\Psi = 0\text{ MPa}).

REASONING PATH
Your ACEpath teacher’s suggested approach
Calculate External Solution Potential First
  • For an open container at atmospheric pressure, Ψp=0 MPa\Psi_p = 0\text{ MPa}, so Ψsolution=Ψs,solution\Psi_{\text{solution}} = \Psi_{s,\text{solution}}.

  • Always find Ψsolution=Ψs+Ψp\Psi_{\text{solution}} = \Psi_s + \Psi_p for the surrounding bath before setting up the equilibrium equation.

Apply Dynamic Equilibrium Condition
  • Net water movement stops when Ψcell=Ψsolution\Psi_{\text{cell}} = \Psi_{\text{solution}}, not when Ψcell=0 MPa\Psi_{\text{cell}} = 0\text{ MPa} (unless the bath is pure water).

  • Set Ψs,cell+Ψp,cell=Ψsolution\Psi_{s,\text{cell}} + \Psi_{p,\text{cell}} = \Psi_{\text{solution}} and solve for the unknown.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Calculate external water potential: Ψsolution=−0.20 MPa+0 MPa=−0.20 MPa\Psi_{\text{solution}} = -0.20\text{ MPa} + 0\text{ MPa} = -0.20\text{ MPa}.

  2. Equate cell potential to external potential at equilibrium: Ψcell=−0.20 MPa\Psi_{\text{cell}} = -0.20\text{ MPa}.

  3. Solve for cell turgor pressure: Ψs+Ψp=−0.20 MPa  ⟹  −0.75 MPa+Ψp=−0.20 MPa  ⟹  Ψp=+0.55 MPa\Psi_s + \Psi_p = -0.20\text{ MPa} \implies -0.75\text{ MPa} + \Psi_p = -0.20\text{ MPa} \implies \Psi_p = +0.55\text{ MPa}.

Final answer

Ψp=+0.55 MPa\Psi_p = +0.55\text{ MPa}; the plant cell has a positive turgor pressure of +0.55 MPa+0.55\text{ MPa} supported by its cell wall, whereas the bathed animal cell has Ψp=0 MPa\Psi_p = 0\text{ MPa}.

NEXT STEPS
Final Takeaways from Your Teacher
  • Check whether the bathing solution is pure water or contains solutes before setting Ψ=0\Psi = 0.

  • Practice solving water potential problems where both the cell and the external solution have nonzero solute potentials.

Lock it in

Similar question

01

A plant cell with an internal solute potential Ψs=−0.90 MPa\Psi_s = -0.90\text{ MPa} is placed into an open beaker of pure water (Ψ=0 MPa\Psi = 0\text{ MPa}). Assuming negligible volume change, calculate the cell's equilibrium pressure potential Ψp\Psi_p.

Answer

Ψp=+0.90 MPa\Psi_p = +0.90\text{ MPa}. At equilibrium, Ψcell=Ψwater=0 MPa\Psi_{\text{cell}} = \Psi_{\text{water}} = 0\text{ MPa}. Therefore, Ψs+Ψp=0  ⟹  −0.90 MPa+Ψp=0  ⟹  Ψp=+0.90 MPa\Psi_s + \Psi_p = 0 \implies -0.90\text{ MPa} + \Psi_p = 0 \implies \Psi_p = +0.90\text{ MPa}.

02

A plant cell with Ψs=−0.80 MPa\Psi_s = -0.80\text{ MPa} and Ψp=+0.30 MPa\Psi_p = +0.30\text{ MPa} is dropped into an open sucrose solution with Ψs=−0.65 MPa\Psi_s = -0.65\text{ MPa}. Determine whether water moves into or out of the cell initially, and find the new equilibrium Ψp\Psi_p assuming no change in internal Ψs\Psi_s.

Answer

Water moves into the cell; new equilibrium Ψp=+0.15 MPa\Psi_p = +0.15\text{ MPa}. Initial cell potential is Ψcell=−0.80+0.30=−0.50 MPa\Psi_{\text{cell}} = -0.80 + 0.30 = -0.50\text{ MPa}, while solution Ψsol=−0.65 MPa\Psi_{\text{sol}} = -0.65\text{ MPa}... wait: Ψcell(−0.50 MPa)>Ψsol(−0.65 MPa)\Psi_{\text{cell}} (-0.50\text{ MPa}) > \Psi_{\text{sol}} (-0.65\text{ MPa}), so water flows OUT of the cell down the water potential gradient until Ψcell=−0.65 MPa\Psi_{\text{cell}} = -0.65\text{ MPa}. At equilibrium, Ψp=−0.65−(−0.80)=+0.15 MPa\Psi_p = -0.65 - (-0.80) = +0.15\text{ MPa}.

03

A red blood cell and a flaccid plant cell (both having internal Ψs=−0.70 MPa\Psi_s = -0.70\text{ MPa} and initial Ψp=0 MPa\Psi_p = 0\text{ MPa}) are simultaneously transferred into an open tank of distilled water (Ψ=0 MPa\Psi = 0\text{ MPa}). Describe the ultimate structural fate and equilibrium Ψp\Psi_p of both cells.

Answer

Animal cell: water flows inward down the potential gradient, causing swelling until lysis occurs; it never establishes a positive stable equilibrium pressure (remains Ψp=0 MPa\Psi_p = 0\text{ MPa} until rupture). Plant cell: water flows inward until the rigid cell wall exerts an equal opposing wall pressure, reaching stable equilibrium at Ψp=+0.70 MPa\Psi_p = +0.70\text{ MPa} without lysing.

Loading workspace…