Resources

An introductory biochemistry student sets up an agarose gel electrophoresis chamber to separate PCR products. The student places the DNA loading wells adjacent to the red positive electrode (anode) and connects the black negative lead (cathode) to the far end of the chamber, applying a constant potential of 110 V110\text{ V}. (a) Based on the chemical structure and net electrical charge of the deoxyribose-phosphate backbone at physiological pH (8.08.0), state the net charge of DNA and deduce the directional migration of the samples (towards cathode or anode). (b) Diagnose the physical fate of the PCR products in the student's setup. (c) If the error is corrected by loading wells at the negative cathode, calculate the net electric force Fe=qEF_e = qE acting on a 400 bp400\text{ bp} double-stranded DNA fragment in a uniform electric field of E=500 V/mE = 500\text{ V/m}, assuming each nucleotide contributes an effective charge of −1.00e-1.00e (where the elementary charge e=1.602×10−19 Ce = 1.602 \times 10^{-19}\text{ C}).

Answer and steps

Final answer

(a) DNA has a net negative charge due to ionized phosphate groups (PO4−\text{PO}_4^-) and migrates toward the positive anode; (b) The DNA samples migrate out of the top of the wells directly into the buffer reservoir and are permanently lost; (c) Fe=6.41×10−14 NF_e = 6.41 \times 10^{-14}\text{ N} directed toward the positive anode.

Steps

Part (a): Net Charge of DNA and Direction of Migration

  1. Chemical Basis of DNA Charge: The backbone of DNA consists of alternating deoxyribose sugar units and phosphate groups linked by phosphodiester bonds. At physiological electrophoresis running buffer pH (≈8.0\approx 8.0), each phosphate group is deprotonated (POX4X−\ce{PO4-}), because its pKa\text{p}K_\text{a} is around 1.01.0. Consequently, DNA carries a net negative charge that is directly proportional to its length.
  2. Directional Migration: In an electric field, charged particles migrate toward the electrode of opposite charge. Because DNA molecules are polyanions (negatively charged), they are attracted to and migrate toward the positive electrode (anode, typically colored red) and are repelled by the negative electrode (cathode, typically colored black). Rule of thumb: In electrophoresis, DNA "runs to red" (negative to positive).

Part (b): Fate of the PCR Products in the Student's Setup

  1. Analysis of the Setup: The student placed the loading wells adjacent to the positive electrode (anode) and the negative electrode (cathode) at the far end of the gel.
  2. Outcome: Upon applying the electric potential, the negatively charged DNA molecules immediately migrate toward the nearby positive anode rather than through the length of the gel. Because the anode is right behind the wells, the DNA fragments rapidly travel out of the wells in the reverse direction, entering the surrounding running buffer reservoir. As a result, the PCR products do not resolve into bands and are permanently lost into the buffer.

Part (c): Calculation of the Net Electric Force (FeF_e)

  1. Determine the Total Number of Nucleotides: A double-stranded DNA (dsDNA\text{dsDNA}) fragment of length 400 bp400\text{ bp} contains two complementary strands: Total nucleotides=400 base pairs×2 nucleotides/bp=800 nucleotides\text{Total nucleotides} = 400\text{ base pairs} \times 2\text{ nucleotides/bp} = 800\text{ nucleotides}
  2. Calculate the Total Magnitude of Charge (qq): Each nucleotide carries an effective charge of −1.00e-1.00e: ∣q∣=800×e=800×(1.602×10−19 C)=1.2816×10−16 C|q| = 800 \times e = 800 \times (1.602 \times 10^{-19}\text{ C}) = 1.2816 \times 10^{-16}\text{ C}
  3. Calculate the Electric Force (FeF_e): Using the electric force equation Fe=qEF_e = qE: Fe=(1.2816×10−16 C)⋅(500 V/m)=6.408×10−14 N≈6.41×10−14 NF_e = (1.2816 \times 10^{-16}\text{ C}) \cdot (500\text{ V/m}) = 6.408 \times 10^{-14}\text{ N} \approx 6.41 \times 10^{-14}\text{ N}

    Because the fragment carries a negative charge, this force is directed toward the positive anode.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets that double-stranded DNA has two complementary strands and calculates charge using 400 nucleotides instead of 800, halving the resulting force.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Phosphate groups give DNA a net negative charge. DNA migrates toward the positive anode.

  2. Step 2

    Because the wells are next to the anode, DNA moves toward the nearest edge and runs off into the buffer.

  3. Step 3

    Number of nucleotides = 400400

    Correct

    Total nucleotides=400 bp×2 nucleotides/bp=800 nucleotides\text{Total nucleotides} = 400\text{ bp} \times 2\text{ nucleotides/bp} = 800\text{ nucleotides}

    You equated 400 base pairs (bp)400\text{ base pairs (bp)} directly to 400 nucleotides400\text{ nucleotides}. Because double-stranded DNA consists of two complementary strands, each base pair contains two individual nucleotides.

  4. Step 4

    q=400×1.602×10−19 C=6.408×10−17 C  ⟹  Fe=qE=6.408×10−17 C×500 V/m=3.20×10−14 Nq = 400 \times 1.602 \times 10^{-19}\text{ C} = 6.408 \times 10^{-17}\text{ C} \implies F_e = qE = 6.408 \times 10^{-17}\text{ C} \times 500\text{ V/m} = 3.20 \times 10^{-14}\text{ N}

    Correct

    q=800×(1.602×10−19 C)=1.282×10−16 C  ⟹  Fe=qE=(1.282×10−16 C)(500 V/m)≈6.41×10−14 Nq = 800 \times (1.602 \times 10^{-19}\text{ C}) = 1.282 \times 10^{-16}\text{ C} \implies F_e = qE = (1.282 \times 10^{-16}\text{ C})(500\text{ V/m}) \approx 6.41 \times 10^{-14}\text{ N}

    Your algebraic substitution and arithmetic were carried out correctly, but the resulting force was half of the expected value due to the strand-count error in Step 3.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly linked the deprotonated phosphate backbone to the net negative charge of DNA.

You accurately predicted that the DNA would run backward into the running buffer due to the reversed electrode orientation.

You correctly recalled and applied the electrostatic force equation Fe=qEF_e = qE.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Base pair to nucleotide conversion omission

You treated base pairs as individual single nucleotides rather than accounting for both strands in a duplex.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Overlooking the duplex architecture of double-stranded DNA (dsDNA) during quantitative stoichiometry conversions. When calculating net charge or mass from base pairs, each base pair always contributes two nucleotides (one on each antiparallel strand).

REASONING PATH
Your ACEpath teacher’s suggested approach
Base Pairs vs. Nucleotides
  • 1 bp (dsDNA)=2 nucleotides1\text{ bp (dsDNA)} = 2\text{ nucleotides}

  • Always multiply the number of base pairs by 22 when calculating total charges, masses, or monomer counts in double-stranded DNA.

Electric Force on Charged Polymers
  • Fe=qE=(Nnucleotides⋅qeff)⋅EF_e = qE = (N_{\text{nucleotides}} \cdot q_{\text{eff}}) \cdot E

  • Verify that total charge qq accounts for the entire polymer system across all complementary strands before multiplying by the electric field strength.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Recognize that a 400 bp400\text{ bp} double-stranded fragment contains two complementary strands: N=400 bp×2=800 nucleotidesN = 400\text{ bp} \times 2 = 800\text{ nucleotides}.

  2. Calculate the net charge magnitude: q=800×1.602×10−19 C=1.2816×10−16 Cq = 800 \times 1.602 \times 10^{-19}\text{ C} = 1.2816 \times 10^{-16}\text{ C}.

  3. Multiply by the electric field: Fe=qE=(1.2816×10−16 C)(500 V/m)=6.408×10−14 N≈6.41×10−14 NF_e = qE = (1.2816 \times 10^{-16}\text{ C})(500\text{ V/m}) = 6.408 \times 10^{-14}\text{ N} \approx 6.41 \times 10^{-14}\text{ N}.

Final answer

Fe=6.41×10−14 NF_e = 6.41 \times 10^{-14}\text{ N} toward the anode

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the structural difference between single-stranded nucleic acids (e.g., mRNA, primers) and double-stranded duplexes (e.g., standard PCR products, genomic DNA).

  • Whenever a problem specifies base pairs (bp\text{bp}) instead of bases/nucleotides (nt\text{nt}), write down ×2\times 2 right away as your first step.

OverviewACEpath Teacher's Diagnosis

02 The student confuses the charges of the electrodes, believing the cathode is positive and the anode is negative, incorrectly concluding that DNA migrates toward the cathode.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    DNA has a net negative charge from phosphate groups. ⟹\Longrightarrow Negatively charged DNA migrates toward the positive cathode.

    Correct

    DNA has a net negative charge due to ionized phosphate groups (PO4−\text{PO}_4^-) and migrates toward the positive electrode (anode).

    You correctly identified that the phosphate backbone gives DNA a net negative charge. However, in an electrolytic system like gel electrophoresis, the positive electrode is the anode (red lead) and the negative electrode is the cathode (black lead). Therefore, negatively charged DNA is attracted to and migrates toward the positive anode, not the cathode.

  2. Step 2

    Since the cathode is at the far end, the DNA migrates across the length of the gel normally.

    Correct

    Because the wells are placed adjacent to the positive anode, DNA immediately migrates backward out of the wells into the buffer reservoir and is permanently lost.

    Because of the electrode confusion in part (a), you deduced that the DNA would run down the gel. In reality, because DNA migrates toward the positive anode located directly behind the loading wells, the fragments immediately exit the rear of the wells into the buffer chamber and fail to resolve on the gel.

  3. Step 3

    dsDNA has 2×400=800 nucleotides⟹q=800×1.602×10−19 C=1.2816×10−16 C⟹Fe=1.2816×10−16 C×500 V/m=6.41×10−14 N\text{dsDNA has } 2 \times 400 = 800\text{ nucleotides} \Longrightarrow q = 800 \times 1.602 \times 10^{-19}\text{ C} = 1.2816 \times 10^{-16}\text{ C} \Longrightarrow F_e = 1.2816 \times 10^{-16}\text{ C} \times 500\text{ V/m} = 6.41 \times 10^{-14}\text{ N}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that the deprotonated phosphate groups confer a net negative charge to DNA.

You correctly multiplied the base-pair length by 22 to account for both strands of double-stranded DNA.

You applied the electric force equation Fe=qEF_e = qE accurately and rounded your answer properly.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Electrode charge designation confusion (Anode vs. Cathode in electrophoresis)

You recognized that negative charges are attracted to positive charges, but you assigned the positive polarity to the cathode instead of the anode.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

In galvanic cells (batteries producing power), the cathode is positive. However, agarose gel electrophoresis is an electrolytic cell driven by an external power supply: oxidation occurs at the positive anode (++) and reduction occurs at the negative cathode (−-). Polyanions like DNA always migrate toward the anode ('anions go to the anode').

REASONING PATH
Your ACEpath teacher’s suggested approach
Electrolytic Cell Polarity
  • In electrophoresis chambers driven by an external power supply, the anode is positive (red) and the cathode is negative (black).

  • Remember the mnemonic 'Run to Red'—negatively charged DNA travels from the negative cathode (black) toward the positive anode (red).

Ion Migration Rule
  • Anions (negative ions) migrate to the anode; cations (positive ions) migrate to the cathode.

  • Since DNA is a polyanion, it must migrate toward the anode.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify electrode polarities in gel electrophoresis: Anode is positive (++), Cathode is negative (−-).

  2. Deduce migration direction: DNA has a net negative charge (polyanion), so it is repelled by the cathode and attracted toward the positive anode.

  3. Evaluate the physical outcome: With the wells placed next to the positive anode, DNA migrates directly backward out of the wells into the running buffer reservoir and is lost.

Final answer

(a) DNA has a net negative charge and migrates toward the positive anode; (b) The DNA migrates out of the top of the wells into the buffer reservoir and is lost; (c) Fe=6.41×10−14 NF_e = 6.41 \times 10^{-14}\text{ N} directed toward the positive anode.

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the distinction in electrode signs between galvanic cells and electrolytic cells.

  • Memorize the laboratory laboratory rule of thumb: DNA 'runs to red' (negative cathode to positive anode).

  • Double-check well orientation relative to the red (++) and black (−-) terminals before applying voltage in future electrophoresis problems.

Lock it in

Similar question

01

A researcher performs agarose gel electrophoresis on a 250 bp250\text{ bp} dsDNA amplicon in a uniform electric field of E=400 V/mE = 400\text{ V/m}. Assuming each nucleotide carries a charge of −1.00e-1.00e (e=1.602×10−19 Ce = 1.602 \times 10^{-19}\text{ C}), calculate the net electric force FeF_e experienced by the amplicon.

Answer

Fe=3.20×10−14 NF_e = 3.20 \times 10^{-14}\text{ N}. Total nucleotides =250 bp×2=500 nucleotides= 250\text{ bp} \times 2 = 500\text{ nucleotides}. Total charge q=500×1.602×10−19 C=8.01×10−17 Cq = 500 \times 1.602 \times 10^{-19}\text{ C} = 8.01 \times 10^{-17}\text{ C}. Electric force Fe=qE=(8.01×10−17 C)(400 V/m)=3.204×10−14 NF_e = qE = (8.01 \times 10^{-17}\text{ C})(400\text{ V/m}) = 3.204 \times 10^{-14}\text{ N}.

02

Two DNA samples are loaded into adjacent lanes: Sample A contains a 600 nt600\text{ nt} single-stranded DNA (ssDNA) oligomer, while Sample B contains a 400 bp400\text{ bp} double-stranded DNA (dsDNA) fragment. Which sample experiences a greater electrostatic driving force FeF_e in the same uniform electric field, and what is the ratio Fe,B/Fe,AF_{e,\text{B}} / F_{e,\text{A}}?

Answer

Sample B experiences the greater force; ratio is 4:34 : 3 (or 1.331.33). Sample A has 600 nucleotides600\text{ nucleotides}, giving charge qA=600eq_A = 600e. Sample B is dsDNA with 400 bp×2=800 nucleotides400\text{ bp} \times 2 = 800\text{ nucleotides}, giving charge qB=800eq_B = 800e. Since Fe∝qF_e \propto q in identical fields, Fe,B/Fe,A=800/600=4/3F_{e,\text{B}} / F_{e,\text{A}} = 800 / 600 = 4/3.

03

A circular plasmid of 3.2 kb3.2\text{ kb} is linearized with a restriction enzyme. During electrophoresis at E=600 V/mE = 600\text{ V/m}, the fragment reaches a terminal velocity where the viscous drag force balances the electric force (Fdrag=FeF_{\text{drag}} = F_e). Calculate the magnitude of the drag force opposing migration at steady state, using e=1.602×10−19 Ce = 1.602 \times 10^{-19}\text{ C}.

Answer

Fdrag=6.15×10−13 NF_{\text{drag}} = 6.15 \times 10^{-13}\text{ N}. Total nucleotides =3200 bp×2=6400 nucleotides= 3200\text{ bp} \times 2 = 6400\text{ nucleotides}. Total charge q=6400×1.602×10−19 C=1.0253×10−15 Cq = 6400 \times 1.602 \times 10^{-19}\text{ C} = 1.0253 \times 10^{-15}\text{ C}. At terminal velocity, Fdrag=Fe=qE=(1.0253×10−15 C)(600 V/m)=6.152×10−13 NF_{\text{drag}} = F_e = qE = (1.0253 \times 10^{-15}\text{ C})(600\text{ V/m}) = 6.152 \times 10^{-13}\text{ N}.

Loading workspace…