Resources

An estuarine salt marsh produces a net primary productivity of 12,000 kJ/(m2⋅yr)12{,}000\text{ kJ}/(\text{m}^2\cdot\text{yr}). Field measurements indicate that primary consumers assimilate energy and transfer it such that secondary consumers receive 144 kJ/(m2⋅yr)144\text{ kJ}/(\text{m}^2\cdot\text{yr}). Assuming the ecological transfer efficiency from producers to primary consumers is 12.0%12.0\%, determine: (a) the ecological transfer efficiency from primary consumers to secondary consumers, and (b) the overall percentage of producer NPP that is lost as metabolic heat, unconsumed biomass, and waste before reaching secondary consumers.

Answer and steps

Final answer

(a) 10.0%10.0\%; (b) 98.8%98.8\%

Steps

Part (a): Ecological Transfer Efficiency from Primary to Secondary Consumers

  1. Calculate the energy transferred to primary consumers: Ecological transfer efficiency is defined as the percentage of energy transferred from one trophic level to the next: Efficiency=Energy at trophic level nEnergy at trophic level n−1×100%\text{Efficiency} = \frac{\text{Energy at trophic level } n}{\text{Energy at trophic level } n-1} \times 100\%

    Given that the net primary productivity (NPP\text{NPP}) of producers is 12,000 kJ/(m2⋅yr)12{,}000\text{ kJ}/(\text{m}^2\cdot\text{yr}) and the transfer efficiency from producers to primary consumers is 12.0%12.0\%: Eprimary consumers=12,000 kJ/(m2⋅yr)⋅0.120=1,440 kJ/(m2⋅yr)E_{\text{primary consumers}} = 12{,}000\text{ kJ}/(\text{m}^2\cdot\text{yr}) \cdot 0.120 = 1{,}440\text{ kJ}/(\text{m}^2\cdot\text{yr})

  2. Calculate the transfer efficiency to secondary consumers: Secondary consumers receive 144 kJ/(m2⋅yr)144\text{ kJ}/(\text{m}^2\cdot\text{yr}). Therefore, the transfer efficiency from primary consumers to secondary consumers is: Transfer efficiency=Esecondary consumersEprimary consumers×100%=1441,440×100%=10.0%\text{Transfer efficiency} = \frac{E_{\text{secondary consumers}}}{E_{\text{primary consumers}}} \times 100\% = \frac{144}{1{,}440} \times 100\% = 10.0\%

Part (b): Overall Percentage of Energy Lost

  1. Determine the total percentage of energy reaching secondary consumers: The fraction of the original producer NPP\text{NPP} incorporated by secondary consumers is: Overall efficiency=Esecondary consumersProducer NPP×100%=144 kJ/(m2⋅yr)12,000 kJ/(m2⋅yr)×100%=1.2%\text{Overall efficiency} = \frac{E_{\text{secondary consumers}}}{\text{Producer NPP}} \times 100\% = \frac{144\text{ kJ}/(\text{m}^2\cdot\text{yr})}{12{,}000\text{ kJ}/(\text{m}^2\cdot\text{yr})} \times 100\% = 1.2\%
  2. Calculate the energy lost: Any energy that does not reach the secondary consumer level is lost through metabolic respiration (heat), unconsumed organic matter (detritus), and egestion/excretion: Percentage lost=100%−1.2%=98.8%\text{Percentage lost} = 100\% - 1.2\% = 98.8\%

(Common Pitfall: Avoid subtracting the individual transfer rates, such as calculating 100%−12%−10%100\% - 12\% - 10\%. Transfer efficiencies are multiplicative across successive trophic levels, not additive.)

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student calculates the transfer efficiency from primary to secondary consumers relative to total producer NPP rather than the energy available at the primary consumer trophic level.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Transfer efficiency=14412000×100%=1.2%\text{Transfer efficiency} = \frac{144}{12000} \times 100\% = 1.2\%

    Correct

    Eprimary consumers=12,000×0.120=1,440 kJ/(m2⋅yr)  ⟹  Transfer efficiency=1441,440×100%=10.0%E_{\text{primary consumers}} = 12{,}000 \times 0.120 = 1{,}440\text{ kJ}/(\text{m}^2\cdot\text{yr}) \implies \text{Transfer efficiency} = \frac{144}{1{,}440} \times 100\% = 10.0\%

    Trophic transfer efficiency from primary to secondary consumers measures the fraction of energy passed between adjacent levels (trophic level n−1n-1 to level nn), so the denominator must be the energy at the primary consumer level (1,440 kJ/(m2⋅yr)1{,}440\text{ kJ}/(\text{m}^2\cdot\text{yr})), not the producer NPP.

  2. Step 2

    Energy remaining at secondary consumers=1.2%  ⟹  Overall percentage lost=100%−1.2%=98.8%\text{Energy remaining at secondary consumers} = 1.2\% \implies \text{Overall percentage lost} = 100\% - 1.2\% = 98.8\%

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the ratio of secondary consumer energy to total producer NPP as 1.2%1.2\%.

You subtracted the remaining fraction from 100%100\% to find the total percentage of energy lost as heat and waste.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Wrong denominator in trophic efficiency

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the transfer efficiency between adjacent consumer levels as a percentage of the base producer NPP rather than a percentage of the energy available at the preceding trophic level.

REASONING PATH
Your ACEpath teacher’s suggested approach
Adjacent Level Definition
  • Trophic Efficiency=EnEn−1×100%\text{Trophic Efficiency} = \frac{E_n}{E_{n-1}} \times 100\%

  • Always calculate energy available at level n−1n-1 first before setting up the transfer ratio for level nn.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Find the energy assimilated by primary consumers: Eprimary=12,000 kJ/(m2⋅yr)×0.120=1,440 kJ/(m2⋅yr)E_{\text{primary}} = 12{,}000\text{ kJ}/(\text{m}^2\cdot\text{yr}) \times 0.120 = 1{,}440\text{ kJ}/(\text{m}^2\cdot\text{yr}).

  2. Divide the secondary consumer energy by the primary consumer energy: Transfer efficiency=1441,440×100%=10.0%\text{Transfer efficiency} = \frac{144}{1{,}440} \times 100\% = 10.0\%.

Final answer

(a) 10.0%10.0\%; (b) 98.8%98.8\%

NEXT STEPS
Final Takeaways from Your Teacher
  • Write out the energy available at each distinct trophic level before calculating step-to-step efficiencies.

  • Remember that overall efficiency across multiple trophic levels is the product of intermediate efficiencies (e.g., 12%×10%=1.2%12\% \times 10\% = 1.2\%), whereas ecological transfer efficiency always compares adjacent levels.

OverviewACEpath Teacher's Diagnosis

02 The student reports the fraction of energy successfully transferred to secondary consumers instead of the percentage lost.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Energy at primary consumers=12,000×0.120=1,440 kJ/(m2⋅yr)\text{Energy at primary consumers} = 12{,}000 \times 0.120 = 1{,}440\text{ kJ}/(\text{m}^2\cdot\text{yr})

  2. Step 2

    Transfer efficiency=(144/1440)×100%=10.0%\text{Transfer efficiency} = (144 / 1440) \times 100\% = 10.0\%

  3. Step 3

    Overall loss=(144/12000)×100%  ⟹  Overall loss=1.2%\text{Overall loss} = (144 / 12000) \times 100\% \implies \text{Overall loss} = 1.2\%

    Correct

    Percentage transferred=14412,000×100%=1.2%  ⟹  Percentage lost=100%−1.2%=98.8%\text{Percentage transferred} = \frac{144}{12{,}000} \times 100\% = 1.2\% \implies \text{Percentage lost} = 100\% - 1.2\% = 98.8\%

    You set up the ratio of secondary consumer energy to producer NPP, which equals 1.2%1.2\%. However, this represents the percentage of energy successfully reaching secondary consumers, not the percentage lost.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the energy assimilated by primary consumers as 1,440 kJ/(m2⋅yr)1{,}440\text{ kJ}/(\text{m}^2\cdot\text{yr}).

You applied the ecological transfer efficiency formula correctly in part (a) to obtain 10.0%10.0\%.

You accurately computed the fraction of initial producer energy reaching secondary consumers as 1.2%1.2\%.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Confusing Transferred Fraction with Lost Fraction

You calculated the fraction of energy reaching the secondary consumer level (1.2%1.2\%) and labeled it as the overall energy lost.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You overlooked that energy balance requires Percentage Lost=100%−Percentage Transferred\text{Percentage Lost} = 100\% - \text{Percentage Transferred}. In an ecosystem, nearly all energy across two trophic links is lost as heat, waste, and unconsumed biomass, so the loss must be close to 100%100\% rather than close to 0%0\%.

REASONING PATH
Your ACEpath teacher’s suggested approach
Conservation of Energy Across Trophic Levels
  • Percentage Transferred+Percentage Lost=100%\text{Percentage Transferred} + \text{Percentage Lost} = 100\%

  • Whenever a problem asks for energy 'lost' or 'dissipated', first determine the percentage transferred, then subtract that value from 100%100\%.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Recognize that 14412,000×100%=1.2%\frac{144}{12{,}000} \times 100\% = 1.2\% is the percentage of producer NPP incorporated into secondary consumers.

  2. Subtract this transferred percentage from 100%100\% to find the energy lost to respiration, heat, and waste: 100%−1.2%=98.8%100\% - 1.2\% = 98.8\%.

Final answer

(a) 10.0%10.0\%; (b) 98.8%98.8\%

NEXT STEPS
Final Takeaways from Your Teacher
  • Perform a biological reality check on your final value: because trophic transfer efficiencies are low (typically 10%–20%10\%\text{--}20\%), cumulative loss across multiple steps should always be very high (>90%>90\%).

  • Clearly write out two separate labels, 'Percentage Transferred' and 'Percentage Lost', to prevent conflating the remaining amount with the dissipated amount.

OverviewACEpath Teacher's Diagnosis

03 The student subtracts the two stage transfer percentages directly instead of finding the energy lost across trophic levels.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Energy at primary consumers=12,000×0.12=1,440 kJ/(m2⋅yr)\text{Energy at primary consumers} = 12{,}000 \times 0.12 = 1{,}440\text{ kJ}/(\text{m}^2\cdot\text{yr})

  2. Step 2

    Transfer efficiency=(1441,440)×100%=10.0%\text{Transfer efficiency} = \left(\frac{144}{1{,}440}\right) \times 100\% = 10.0\%

  3. Step 3

    Total transfer efficiency=12.0%+10.0%=22.0%\text{Total transfer efficiency} = 12.0\% + 10.0\% = 22.0\%

    Correct

    Overall efficiency=14412,000×100%=1.2%(or 12.0%×10.0%=1.2%)\text{Overall efficiency} = \frac{144}{12{,}000} \times 100\% = 1.2\% \quad (\text{or } 12.0\% \times 10.0\% = 1.2\%)

    Ecological transfer efficiencies represent successive fractions of remaining energy, so they must be multiplied rather than added. Alternatively, divide the secondary consumer energy (144 kJ/(m2⋅yr)144\text{ kJ}/(\text{m}^2\cdot\text{yr})) directly by the initial producer NPP (12,000 kJ/(m2⋅yr)12{,}000\text{ kJ}/(\text{m}^2\cdot\text{yr})).

  4. Step 4

    Overall percentage lost=100%−22.0%=78.0%\text{Overall percentage lost} = 100\% - 22.0\% = 78.0\%

    Correct

    Overall percentage lost=100%−1.2%=98.8%\text{Overall percentage lost} = 100\% - 1.2\% = 98.8\%

    Your logic of subtracting the retained percentage from 100%100\% was correct, but the value carried forward from your previous addition was incorrect.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the energy assimilated by primary consumers.

You applied the trophic level efficiency formula accurately for part (a).

You recognized that total energy lost equals 100%100\% minus the overall percentage transferred.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Additive Trophic Efficiencies

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated consecutive trophic transfer efficiencies as additive parts of the original energy rather than compounding, multiplicative fractions across successive trophic levels.

REASONING PATH
Your ACEpath teacher’s suggested approach
Compounding Trophic Transfers
  • Energy transfer across trophic levels is compounding: Overall Efficiency=Efficiency1×Efficiency2×…\text{Overall Efficiency} = \text{Efficiency}_1 \times \text{Efficiency}_2 \times \dots

  • Always multiply stage percentages (expressed as decimals) or directly divide the final trophic level's energy by the initial producer energy.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Calculate the fraction of original producer NPP that reaches secondary consumers: 144 kJ/(m2⋅yr)12,000 kJ/(m2⋅yr)×100%=1.2%\frac{144\text{ kJ}/(\text{m}^2\cdot\text{yr})}{12{,}000\text{ kJ}/(\text{m}^2\cdot\text{yr})} \times 100\% = 1.2\% (or 0.120×0.100=0.012=1.2%0.120 \times 0.100 = 0.012 = 1.2\%)

  2. Subtract this reaching fraction from 100%100\% to find the total energy lost to heat, waste, and unconsumed biomass: 100%−1.2%=98.8%100\% - 1.2\% = 98.8\%

Final answer

(a) 10.0%10.0\%; (b) $98.8%

NEXT STEPS
Final Takeaways from Your Teacher
  • When tracking energy across multiple trophic steps, calculate overall transfer either by multiplying the decimal efficiencies or by directly dividing the final level's energy by the initial level's energy.

  • Practice calculating cumulative energy loss across 3-step and 4-step food chains to reinforce that energy loss increases exponentially with each link.

Lock it in

Similar question

01

A forest ecosystem has a net primary productivity of 8,000 kJ/(m2⋅yr)8{,}000\text{ kJ}/(\text{m}^2\cdot\text{yr}). Primary consumers receive 800 kJ/(m2⋅yr)800\text{ kJ}/(\text{m}^2\cdot\text{yr}), and secondary consumers receive 120 kJ/(m2⋅yr)120\text{ kJ}/(\text{m}^2\cdot\text{yr}). Calculate the ecological transfer efficiency from primary to secondary consumers.

Answer

15.0%15.0\%. The efficiency compares adjacent levels: 120800×100%=15.0%\frac{120}{800} \times 100\% = 15.0\%.

02

In a lake ecosystem, phytoplankton provide an NPP of 25,000 J/(m2⋅yr)25{,}000\text{ J}/(\text{m}^2\cdot\text{yr}). The transfer efficiency from producers to zooplankton is 14%14\%, and from zooplankton to small fish is 8%8\%. How much energy reaches small fish, and what overall percentage of producer NPP is lost?

Answer

280 J/(m2⋅yr)280\text{ J}/(\text{m}^2\cdot\text{yr}) reaches small fish; 98.88%98.88\% is lost. Zooplankton get 25,000×0.14=3,500 J/(m2⋅yr)25{,}000 \times 0.14 = 3{,}500\text{ J}/(\text{m}^2\cdot\text{yr}); small fish get 3,500×0.08=280 J/(m2⋅yr)3{,}500 \times 0.08 = 280\text{ J}/(\text{m}^2\cdot\text{yr}). Overall loss is 100%−(28025,000×100%)=98.88%100\% - \left(\frac{280}{25{,}000} \times 100\%\right) = 98.88\%.

03

An aquatic food chain has three trophic levels: algae (producers), herbivorous snails (primary consumers), and sunfish (secondary consumers). Algal NPP is 16,000 kJ/(m2⋅yr)16{,}000\text{ kJ}/(\text{m}^2\cdot\text{yr}). Snails have an ecological transfer efficiency of 15.0%15.0\%. If sunfish receive 216 kJ/(m2⋅yr)216\text{ kJ}/(\text{m}^2\cdot\text{yr}): (a) find the transfer efficiency from snails to sunfish, and (b) calculate the energy lost as heat and waste between the snail and sunfish trophic levels specifically.

Answer

(a) 9.0%9.0\%; (b) 2,184 kJ/(m2⋅yr)2{,}184\text{ kJ}/(\text{m}^2\cdot\text{yr}). Snail energy is 16,000×0.150=2,400 kJ/(m2⋅yr)16{,}000 \times 0.150 = 2{,}400\text{ kJ}/(\text{m}^2\cdot\text{yr}). Sunfish transfer efficiency is 2162,400×100%=9.0%\frac{216}{2{,}400} \times 100\% = 9.0\%. Energy lost between these two consumer levels is 2,400−216=2,184 kJ/(m2⋅yr)2{,}400 - 216 = 2{,}184\text{ kJ}/(\text{m}^2\cdot\text{yr}).

Loading workspace…