Resources

In a continuous chemostat experiment measuring predator-prey population oscillations between the predatory ciliate Didinium nasutum (PP) and its ciliated prey Paramecium aurelia (VV), the dynamics follow the standard Lotka-Volterra predation equations: dVdt=rV−aVP\frac{dV}{dt} = r V - a V P dPdt=baVP−mP\frac{dP}{dt} = b a V P - m P where rr is the intrinsic per-capita growth rate of prey, aa is the predatory capture efficiency, bb is the conversion efficiency of consumed prey into predator offspring, and mm is the predator per-capita starvation mortality rate. Microscopic image analysis confirms that the non-trivial predator zero-net-growth isocline (prey equilibrium density V^\hat{V}) is established at exactly V^=850 cells/mL\hat{V} = 850\text{ cells/mL}, while the prey zero-net-growth isocline (predator equilibrium density P^\hat{P}) occurs at P^=40 individuals/mL\hat{P} = 40\text{ individuals/mL}. Laboratory physiological assays independently reveal that Didinium individuals suffer an exponential per-capita starvation death rate of m=0.170 day−1m = 0.170\text{ day}^{-1}, and the predatory attack efficiency is measured at a=0.0050 mL⋅cells−1⋅day−1a = 0.0050\text{ mL}\cdot\text{cells}^{-1}\cdot\text{day}^{-1}. Working backwards from this ecological snapshot, calculate: (1) the predator conversion efficiency bb (expressed as new Didinium generated per Paramecium consumed), and (2) the intrinsic prey exponential growth rate rr (in day−1\text{day}^{-1}).

Answer and steps

Final answer

(1) Conversion efficiency b=maV^=0.170(0.0050)(850)=0.0400 predators/preyb = \frac{m}{a \hat{V}} = \frac{0.170}{(0.0050)(850)} = 0.0400\text{ predators/prey}; (2) Intrinsic prey growth rate r=aP^=(0.0050)(40)=0.200 day−1r = a \hat{P} = (0.0050)(40) = 0.200\text{ day}^{-1}.

Steps

01

Understanding Zero-Net-Growth Isoclines (ZNGIs)

A zero-net-growth isocline (ZNGI) represents the set of population densities where the rate of change of a given species equals zero:

  • For the predator population (PP), the rate of change is: dPdt=P(baV−m)\frac{dP}{dt} = P(b a V - m) Setting dPdt=0\frac{dP}{dt} = 0 for a non-zero predator population (P>0P > 0) yields the predator isocline: baV^−m=0  ⟹  V^=mbab a \hat{V} - m = 0 \implies \hat{V} = \frac{m}{b a} This shows that the predator population remains stationary only at a specific prey threshold density, V^\hat{V}.
  • For the prey population (VV), the rate of change is: dVdt=V(r−aP)\frac{dV}{dt} = V(r - a P) Setting dVdt=0\frac{dV}{dt} = 0 for a non-zero prey population (V>0V > 0) yields the prey isocline: r−aP^=0  ⟹  P^=rar - a \hat{P} = 0 \implies \hat{P} = \frac{r}{a} This shows that the prey population remains stationary only at a specific predator threshold density, P^\hat{P}.

02

Calculating the Predator Conversion Efficiency (bb)

Rearranging the predator isocline equation to solve for the conversion efficiency bb: b=maV^b = \frac{m}{a \hat{V}}

Substitute the given values:

  • Starvation mortality rate: m=0.170 day−1m = 0.170\text{ day}^{-1}
  • Attack efficiency: a=0.0050 mL⋅cells−1⋅day−1a = 0.0050\text{ mL}\cdot\text{cells}^{-1}\cdot\text{day}^{-1}
  • Equilibrium prey density: V^=850 cells/mL\hat{V} = 850\text{ cells/mL}

b=0.170(0.0050)(850)=0.1704.25=0.0400 predators/preyb = \frac{0.170}{(0.0050)(850)} = \frac{0.170}{4.25} = 0.0400\text{ predators/prey}

Interpretation: It takes 10.0400=25\frac{1}{0.0400} = 25 consumed Paramecium cells to produce one new Didinium cell.


03

Calculating the Intrinsic Prey Growth Rate (rr)

Rearranging the prey isocline equation to solve for the intrinsic growth rate rr: r=aP^r = a \hat{P}

Substitute the given values:

  • Attack efficiency: a=0.0050 mL⋅cells−1⋅day−1a = 0.0050\text{ mL}\cdot\text{cells}^{-1}\cdot\text{day}^{-1}
  • Equilibrium predator density: P^=40 individuals/mL\hat{P} = 40\text{ individuals/mL}

r=(0.0050)(40)=0.200 day−1r = (0.0050)(40) = 0.200\text{ day}^{-1}


Common Pitfall to Avoid

Be careful not to switch the equilibrium variables:

  • The predator isocline (dPdt=0\frac{dP}{dt} = 0) defines the critical density of the prey (V^=850 cells/mL\hat{V} = 850\text{ cells/mL}), because prey abundance controls predator birth rates.
  • The prey isocline (dVdt=0\frac{dV}{dt} = 0) defines the critical density of the predator (P^=40 individuals/mL\hat{P} = 40\text{ individuals/mL}), because predator abundance controls prey mortality rates.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student confuses the predator and prey equilibrium densities, using P_hat instead of V_hat to calculate the conversion efficiency b.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    dPdt=0  ⟹  b∗a∗P_hat−m=0  ⟹  b=ma∗P_hat\frac{dP}{dt} = 0 \implies b * a * P\_hat - m = 0 \implies b = \frac{m}{a * P\_hat}

    Correct

    dPdt=0  ⟹  P(baV^−m)=0  ⟹  b=maV^\frac{dP}{dt} = 0 \implies P(b a \hat{V} - m) = 0 \implies b = \frac{m}{a \hat{V}}

    Factoring the predator equation gives dPdt=P(baV−m)\frac{dP}{dt} = P(b a V - m). For a non-trivial equilibrium (P>0P > 0), setting this to zero gives baV^−m=0b a \hat{V} - m = 0, meaning the predator's net growth rate depends on prey density V^\hat{V}, not predator density P^\hat{P}.

  2. Step 2

    b=0.1700.0050∗40  ⟹  b=0.1700.2=0.85b = \frac{0.170}{0.0050 * 40} \implies b = \frac{0.170}{0.2} = 0.85

    Correct

    b=0.170(0.0050)(850)=0.1704.25=0.0400 predators/preyb = \frac{0.170}{(0.0050)(850)} = \frac{0.170}{4.25} = 0.0400\text{ predators/prey}

    Your arithmetic was carried out accurately based on your formula, but the result was incorrect because it used P^=40\hat{P} = 40 instead of V^=850\hat{V} = 850.

  3. Step 3

    dVdt=0  ⟹  r−a∗P_hat=0  ⟹  r=a∗P_hat=0.0050∗40=0.20 day−1\frac{dV}{dt} = 0 \implies r - a * P\_hat = 0 \implies r = a * P\_hat = 0.0050 * 40 = 0.20\text{ day}^{-1}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly set the time derivative dVdt=0\frac{dV}{dt} = 0 to identify the prey zero-net-growth isocline.

You correctly solved for the intrinsic growth rate rr and obtained 0.20 day−10.20\text{ day}^{-1} with the proper units.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Isocline Variable Inversion

No, this reflects a conceptual confusion about which population density determines each species' zero-net-growth isocline.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

In the Lotka-Volterra predation model, a predator's birth rate is governed by encounters with prey (baVb a V), so the predator population stops growing (dPdt=0\frac{dP}{dt} = 0) at a critical threshold of prey density (V^=mba\hat{V} = \frac{m}{b a}). Conversely, prey mortality is driven by predation (−aVP-a V P), so prey stop growing (dVdt=0\frac{dV}{dt} = 0) at a critical predator density (P^=ra\hat{P} = \frac{r}{a}). Confusing P^\hat{P} with V^\hat{V} in the predator isocline led to using 4040 instead of 850850.

REASONING PATH
Your ACEpath teacher’s suggested approach
Factor Out the Population Variable
  • Always write the differential equation in factored form before setting it to zero: dPdt=P(baV−m)\frac{dP}{dt} = P(b a V - m).

  • Cancel the non-zero population PP to see clearly that the remaining condition baV−m=0b a V - m = 0 contains VV, not PP.

Biological Sanity Check
  • Predators starve when prey are scarce; prey decline when predators are abundant.

  • Ask yourself: 'Does predator reproduction depend on how many prey exist, or how many predators exist?' Because it depends on food availability, the predator isocline must fix prey density V^\hat{V}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set dPdt=0\frac{dP}{dt} = 0: P(baV^−m)=0  ⟹  baV^=mP(b a \hat{V} - m) = 0 \implies b a \hat{V} = m.

  2. Solve for the conversion efficiency bb: b=maV^b = \frac{m}{a \hat{V}}.

  3. Substitute the given parameter values (m=0.170 day−1m = 0.170\text{ day}^{-1}, a=0.0050 mL⋅cells−1⋅day−1a = 0.0050\text{ mL}\cdot\text{cells}^{-1}\cdot\text{day}^{-1}, and V^=850 cells/mL\hat{V} = 850\text{ cells/mL}): b=0.170(0.0050)(850)=0.1704.25=0.0400 predators/preyb = \frac{0.170}{(0.0050)(850)} = \frac{0.170}{4.25} = 0.0400\text{ predators/prey}.

Final answer

(1) Conversion efficiency b=0.0400 predators/preyb = 0.0400\text{ predators/prey}; (2) Intrinsic prey growth rate r=0.200 day−1r = 0.200\text{ day}^{-1}.

NEXT STEPS
Final Takeaways from Your Teacher
  • Review phase-plane portraits for Lotka-Volterra predator-prey systems to visually reinforce that the predator isocline is a vertical line (V=V^V = \hat{V}) and the prey isocline is a horizontal line (P=P^P = \hat{P}).

  • Practice deriving zero-net-growth isoclines from first principles by factoring the equations rather than memorizing isolated formulas.

OverviewACEpath Teacher's Diagnosis

02 The student forgets that the predator growth term contains the attack efficiency a, solving b * V_hat = m instead of b * a * V_hat = m.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    dPdt=0  ⟹  b⋅V^−m=0  ⟹  b=mV^=0.170850=0.0002\frac{dP}{dt} = 0 \implies b \cdot \hat{V} - m = 0 \implies b = \frac{m}{\hat{V}} = \frac{0.170}{850} = 0.0002

    Correct

    dPdt=0  ⟹  baV^−m=0  ⟹  b=maV^=0.170(0.0050)(850)=0.0400 predators/prey\frac{dP}{dt} = 0 \implies b a \hat{V} - m = 0 \implies b = \frac{m}{a \hat{V}} = \frac{0.170}{(0.0050)(850)} = 0.0400\text{ predators/prey}

    You omitted the capture efficiency aa from the predator per-capita growth term baVb a V. Because predator birth rate depends on predation encounters, setting dPdt=P(baV−m)=0\frac{dP}{dt} = P(b a V - m) = 0 requires baV^=mb a \hat{V} = m, so aa must remain in the denominator.

  2. Step 2

    dVdt=0  ⟹  r−a⋅P^=0  ⟹  r=a⋅P^=0.0050⋅40=0.20 day−1\frac{dV}{dt} = 0 \implies r - a \cdot \hat{P} = 0 \implies r = a \cdot \hat{P} = 0.0050 \cdot 40 = 0.20\text{ day}^{-1}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that setting dPdt=0\frac{dP}{dt} = 0 yields the predator zero-net-growth isocline in terms of prey density V^\hat{V}.

You correctly derived and evaluated the prey growth rate rr from the prey isocline dVdt=0\frac{dV}{dt} = 0.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omitted parameter in algebraic substitution

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the predator numerical response as directly proportional to prey density alone (bVb V) rather than coupling it to the prey kill rate (b⋅aVb \cdot a V). In the standard Lotka-Volterra model, predators only gain biomass through successful predation events, so the birth term must include the capture efficiency aa.

REASONING PATH
Your ACEpath teacher’s suggested approach
Factor the full per-capita growth equation
  • For dPdt=baVP−mP=P(baV−m)\frac{dP}{dt} = b a V P - m P = P(b a V - m), setting the non-trivial rate to zero yields baV^=mb a \hat{V} = m.

  • Always factor out PP explicitly before isolating unknown parameters, keeping the product bab a intact.

Perform a dimensional check on conversion efficiency
  • Conversion efficiency bb is dimensionless (or expressed as predators/prey\text{predators}/\text{prey}).

  • Check your units: mV^\frac{m}{\hat{V}} has units of day−1cells⋅mL−1=mL⋅cells−1⋅day−1\frac{\text{day}^{-1}}{\text{cells}\cdot\text{mL}^{-1}} = \text{mL}\cdot\text{cells}^{-1}\cdot\text{day}^{-1}, which does not match bb; dividing by aa cancels the volume and time dimensions.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the predator differential equation and factor out PP: dPdt=P(baV−m)=0\frac{dP}{dt} = P(b a V - m) = 0.

  2. Set the per-capita rate equal to zero for P>0P > 0: baV^−m=0b a \hat{V} - m = 0.

  3. Solve for the conversion efficiency: b=maV^b = \frac{m}{a \hat{V}}.

  4. Substitute the given parameters: b=0.170(0.0050)(850)=0.1704.25=0.0400 predators/preyb = \frac{0.170}{(0.0050)(850)} = \frac{0.170}{4.25} = 0.0400\text{ predators/prey}.

Final answer

(1) b=0.0400 predators/preyb = 0.0400\text{ predators/prey}; (2) r=0.200 day−1r = 0.200\text{ day}^{-1}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the ecological derivation of Lotka-Volterra predator birth rate as (prey captured per time) ×\times (predator offspring per prey consumed).

  • Practice checking parameter dimensions whenever deriving algebraic expressions for demographic rates.

OverviewACEpath Teacher's Diagnosis

03 The student inverts the relationship when solving the prey isocline for r, writing r = P_hat / a instead of r = a * P_hat.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    dPdt=0  ⟹  b⋅a⋅V^−m=0  ⟹  b=ma⋅V^=0.1700.0050⋅850=0.040\frac{dP}{dt} = 0 \implies b \cdot a \cdot \hat{V} - m = 0 \implies b = \frac{m}{a \cdot \hat{V}} = \frac{0.170}{0.0050 \cdot 850} = 0.040

  2. Step 2

    dVdt=0  ⟹  r−a⋅P^=0\frac{dV}{dt} = 0 \implies r - a \cdot \hat{P} = 0

  3. Step 3

    r=P^a  ⟹  r=400.0050=8000 day−1r = \frac{\hat{P}}{a} \implies r = \frac{40}{0.0050} = 8000\text{ day}^{-1}

    Correct

    r=a⋅P^=(0.0050)(40)=0.200 day−1r = a \cdot \hat{P} = (0.0050)(40) = 0.200\text{ day}^{-1}

    When solving r−aP^=0r - a\hat{P} = 0 for rr, adding aP^a\hat{P} to both sides yields r=aP^r = a\hat{P}, not r=P^ar = \frac{\hat{P}}{a}. Dividing resulted in an unrealistically high growth rate of 8000 day−18000\text{ day}^{-1}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified and applied the zero-net-growth isocline conditions for both predator and prey populations.

You accurately substituted values and solved for the conversion efficiency bb.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Algebraic rearrangement error

You accidentally divided by the attack efficiency aa instead of multiplying it by P^\hat{P} when isolating rr.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Inverting the linear algebraic rearrangement: treating r−aP^=0r - a\hat{P} = 0 as if P^=a⋅r\hat{P} = a \cdot r rather than directly moving the subtracted product aP^a\hat{P} across the equals sign.

REASONING PATH
Your ACEpath teacher’s suggested approach
Isolate by inverse operations
  • For an equation of the form x−k=0x - k = 0, add kk to both sides to get x=kx = k. Here, k=aP^k = a\hat{P}, so r=aP^r = a\hat{P}.

  • Always write out the addition step explicitly: r−aP^+aP^=0+aP^  ⟹  r=aP^r - a\hat{P} + a\hat{P} = 0 + a\hat{P} \implies r = a\hat{P}.

Biological reality check
  • Microbial intrinsic growth rates rr are typically between 0.10.1 and 5 day−15\text{ day}^{-1}. An rr of 8000 day−18000\text{ day}^{-1} implies a doubling time of under 8 seconds.

  • Perform a quick sanity check on biological rates and units to detect inverted factors immediately.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Start from the prey isocline equation: r−aP^=0r - a\hat{P} = 0.

  2. Add aP^a\hat{P} to both sides to solve for rr: r=aP^r = a\hat{P}.

  3. Substitute the given values a=0.0050 mL⋅cells−1⋅day−1a = 0.0050\text{ mL}\cdot\text{cells}^{-1}\cdot\text{day}^{-1} and P^=40 individuals/mL\hat{P} = 40\text{ individuals/mL} into the formula: r=(0.0050)(40)=0.200 day−1r = (0.0050)(40) = 0.200\text{ day}^{-1}.

Final answer

r=0.200 day−1r = 0.200\text{ day}^{-1}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review basic linear isolation steps when terms contain products.

  • Practice checking whether final physiological rates fall within plausible ecological ranges.

Lock it in

Similar question

01

In a predator-prey system with dVdt=rV−aVP\frac{dV}{dt} = r V - a V P and dPdt=baVP−mP\frac{dP}{dt} = b a V P - m P, the prey population stabilizes at V^=500 prey/ha\hat{V} = 500\text{ prey/ha} and the predator population stabilizes at P^=25 predators/ha\hat{P} = 25\text{ predators/ha}. If the prey growth rate is r=0.50 day−1r = 0.50\text{ day}^{-1} and predator starvation rate is m=0.10 day−1m = 0.10\text{ day}^{-1}, calculate: (1) the attack efficiency aa, and (2) the conversion efficiency bb.

Answer

(1) From dVdt=0\frac{dV}{dt} = 0, a=rP^=0.5025=0.020 ha⋅predator−1⋅day−1a = \frac{r}{\hat{P}} = \frac{0.50}{25} = 0.020\text{ ha}\cdot\text{predator}^{-1}\cdot\text{day}^{-1}. (2) From dPdt=0\frac{dP}{dt} = 0, b=maV^=0.10(0.020)(500)=0.1010=0.010 predators/preyb = \frac{m}{a \hat{V}} = \frac{0.10}{(0.020)(500)} = \frac{0.10}{10} = 0.010\text{ predators/prey}.

02

A biological control agent (parasitoid wasp, PP) preys on an agricultural pest (VV). Researchers observe that the pest population remains stationary when parasitoid density is P^=15 wasps/plant\hat{P} = 15\text{ wasps/plant}. When the attack rate is a=0.04 plant⋅wasp−1⋅day−1a = 0.04\text{ plant}\cdot\text{wasp}^{-1}\cdot\text{day}^{-1} and wasp starvation mortality is m=0.12 day−1m = 0.12\text{ day}^{-1}, find the minimum pest density V^\hat{V} required for the wasp population to sustain itself without declining if each consumed pest yields b=0.05b = 0.05 new wasps.

Answer

The minimum pest density to prevent wasp decline is the predator zero-net-growth isocline V^=mba=0.12(0.05)(0.04)=0.120.002=60 pests/plant\hat{V} = \frac{m}{b a} = \frac{0.12}{(0.05)(0.04)} = \frac{0.12}{0.002} = 60\text{ pests/plant}.

03

Suppose prey growth exhibits density dependence (carrying capacity KK): dVdt=rV(1−VK)−aVP\frac{dV}{dt} = r V \left(1 - \frac{V}{K}\right) - a V P, while predator dynamics remain dPdt=baVP−mP\frac{dP}{dt} = b a V P - m P. (1) Derive the formula for the predator isocline V^\hat{V}. (2) Does introducing prey carrying capacity KK alter the value of the prey density needed to maintain a stationary predator population?

Answer

(1) Setting dPdt=P(baV−m)=0\frac{dP}{dt} = P(b a V - m) = 0 for P>0P > 0 yields V^=mba\hat{V} = \frac{m}{b a}. (2) No; the predator zero-net-growth isocline is independent of prey carrying capacity KK because predator per-capita growth depends solely on encounter rate with prey and starvation rate (baV−mb a V - m).

Loading workspace…