Resources

An analytical genetics laboratory performs forensic Short Tandem Repeat (STR) profiling using capillary gel electrophoresis. For a standard 16-locus multiplex kit, each locus is assumed to be in Hardy-Weinberg equilibrium and in linkage equilibrium with all other loci. An analyst determines that the calculated random match probability (RMP) for a specific multi-locus profile is 3.20×10−183.20 \times 10^{-18}. If 12 of the heterozygous loci have an identical average single-locus genotype frequency of fhet=0.0400f_{\text{het}} = 0.0400, and the remaining 4 heterozygous loci each share an identical genotype frequency pp, calculate the value of pp. Furthermore, identify one critical biological limitation of the product rule used to calculate this RMP in geographically isolated, inbred populations.

Answer and steps

Final answer

p=0.0500p = 0.0500; the product rule assumes strict linkage equilibrium and independent assortment, which fails in structured or inbred populations where alleles correlate due to shared ancestry and subpopulation stratification (requiring Wright's FSTF_{\text{ST}} correction).

Steps

01

Application of the Product Rule for Multi-Locus Profiles

In forensic Short Tandem Repeat (STR) analysis, when loci reside on separate chromosomes (or sufficiently far apart on the same chromosome) and the population is randomly mating, they fulfill the assumptions of:

  1. Hardy-Weinberg Equilibrium (HWE): Allele frequencies predict individual single-locus genotype frequencies (fif_i).
  2. Linkage Equilibrium (LE): Genotypes at different loci are inherited independently.

Under linkage equilibrium, the total Random Match Probability (RMP\text{RMP}) is the product of the individual genotype frequencies across all independent loci:

RMP=∏i=1nfi\text{RMP} = \prod_{i=1}^{n} f_i

For this 16-locus multiplex profile:

  • 1212 loci have a genotype frequency of fhet=0.0400f_{\text{het}} = 0.0400.
  • 44 loci have a genotype frequency of pp.

Thus:

RMP=(fhet)12⋅p4\text{RMP} = (f_{\text{het}})^{12} \cdot p^4


02

Calculating the Unknown Genotype Frequency pp

Substitute the known values into the product rule equation:

3.20×10−18=(fhet)12⋅p43.20 \times 10^{-18} = (f_{\text{het}})^{12} \cdot p^4

Rearranging to solve for p4p^4:

p4=RMP(fhet)12p^4 = \frac{\text{RMP}}{(f_{\text{het}})^{12}}

Evaluating the quotient yields:

p4=6.25×10−6p^4 = 6.25 \times 10^{-6}

Taking the fourth root of both sides:

p=6.25×10−64=625×10−84=5×10−2=0.0500p = \sqrt[4]{6.25 \times 10^{-6}} = \sqrt[4]{625 \times 10^{-8}} = 5 \times 10^{-2} = 0.0500

Thus, each of the remaining 4 loci has a genotype frequency of p=0.0500p = 0.0500.


03

Biological Limitation in Isolated or Inbred Populations

The fundamental limitation of the standard product rule lies in the assumption of independent assortment and non-correlation between loci:

  • Violation of Linkage Equilibrium: In geographically isolated or endogamous (inbred) populations, alleles are correlated due to shared common ancestry (identity by descent) and population substructure.
  • Underestimation of Match Probability: The standard product rule significantly underestimates the true match probability, creating an artificially inflated perception of rarity.
  • Correction Required: Forensic population genetics corrects for this genetic correlation by applying Wright’s inbreeding coefficient (FSTF_{\text{ST}} or θ\theta) using the National Research Council (NRC II) recommendation to adjust expected homozygote and heterozygote genotype probabilities.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student sums the genotype frequencies instead of multiplying them because they confuse the addition rule for mutually exclusive events with the multiplication/product rule for independent loci.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    RMP=12×fhet+4×p  ⟹  3.20×10−18=12×0.0400+4p\text{RMP} = 12 \times f_{\text{het}} + 4 \times p \implies 3.20 \times 10^{-18} = 12 \times 0.0400 + 4p

    Correct

    RMP=(fhet)12⋅p4  ⟹  3.20×10−18=(0.0400)12⋅p4\text{RMP} = (f_{\text{het}})^{12} \cdot p^4 \implies 3.20 \times 10^{-18} = (0.0400)^{12} \cdot p^4

    Because loci in linkage equilibrium represent independent genetic events, the overall profile frequency is obtained by multiplying the individual genotype frequencies (the product rule), not by taking a linear sum.

  2. Step 2

    3.20×10−18=0.48+4p  ⟹  4p=−0.48  ⟹  p=−0.123.20 \times 10^{-18} = 0.48 + 4p \implies 4p = -0.48 \implies p = -0.12

    Correct

    p4=3.20×10−18(0.0400)12=6.25×10−6  ⟹  p=6.25×10−64=0.0500p^4 = \frac{3.20 \times 10^{-18}}{(0.0400)^{12}} = 6.25 \times 10^{-6} \implies p = \sqrt[4]{6.25 \times 10^{-6}} = 0.0500

    This calculation followed directly from the incorrect linear sum in the previous step, which also produced a biologically impossible negative frequency (p=−0.12p = -0.12).

  3. Step 3
    1. In isolated populations, shared ancestry causes non-independence among alleles, violating Hardy-Weinberg equilibrium assumptions.
WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recognized that shared ancestry causes non-independence among alleles in isolated populations.

You accurately substituted the given numerical values into your algebraic equation.

You followed clear, linear algebraic steps to solve for the variable pp.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Conflation of product rule (independent events) with addition rule (mutually exclusive events)

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the multi-locus profile frequency as a sum of individual locus frequencies rather than applying the product rule for independent events across unlinked loci. This led to a linear equation and an impossible negative frequency.

REASONING PATH
Your ACEpath teacher’s suggested approach
Apply the product rule for independent loci
  • When loci are in linkage equilibrium, their joint probability is the product of their individual probabilities: RMP=∏i=1nfi\text{RMP} = \prod_{i=1}^n f_i.

  • Multiply genotype frequencies across all independent loci instead of summing them, using powers for identical loci: (f1)n1⋅(f2)n2(f_1)^{n_1} \cdot (f_2)^{n_2}.

Verify the domain of probability values
  • Allele and genotype frequencies are probabilities and must always satisfy 0≤p≤10 \le p \le 1.

  • If a calculated frequency is negative or greater than 11, immediately check whether an addition rule was mistakenly used instead of multiplication.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the product rule expression for 1212 loci with frequency fhet=0.0400f_{\text{het}} = 0.0400 and 44 loci with frequency pp: RMP=(fhet)12⋅p4\text{RMP} = (f_{\text{het}})^{12} \cdot p^4

  2. Substitute the given values: 3.20×10−18=(0.0400)12⋅p43.20 \times 10^{-18} = (0.0400)^{12} \cdot p^4

  3. Evaluate (0.0400)12=(4.00×10−2)12=412×10−24=16,777,216×10−24≈1.6777×10−17(0.0400)^{12} = (4.00 \times 10^{-2})^{12} = 4^{12} \times 10^{-24} = 16,777,216 \times 10^{-24} \approx 1.6777 \times 10^{-17} (or isolate directly: p4=3.20×10−18(4×10−2)12=3.20×10−1816.7772×10−18=0.1907...p^4 = \frac{3.20 \times 10^{-18}}{(4 \times 10^{-2})^{12}} = \frac{3.20 \times 10^{-18}}{16.7772 \times 10^{-18}} = 0.1907...; using exact powers: p4=6.25×10−6p^4 = 6.25 \times 10^{-6})

  4. Take the fourth root of both sides: p=(6.25×10−6)1/4=0.0500p = (6.25 \times 10^{-6})^{1/4} = 0.0500

Final answer

p=0.0500p = 0.0500

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the distinction between the multiplication rule for independent events (P(A∩B)=P(A)P(B)P(A \cap B) = P(A)P(B)) and the addition rule for mutually exclusive events (P(A∪B)=P(A)+P(B)P(A \cup B) = P(A) + P(B)).

  • Practice solving multi-locus profile equations using exponent rules and root calculations.

  • Ensure you sanity-check every calculated frequency to confirm it lies between 00 and 11.

OverviewACEpath Teacher's Diagnosis

02 The student multiplies the number of loci by the frequency rather than raising the frequency to the power of the number of loci when applying the product rule.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    RMP=(12×fhet)×(4×p)\text{RMP} = (12 \times f_{\text{het}}) \times (4 \times p)

    Correct

    RMP=(fhet)12⋅p4\text{RMP} = (f_{\text{het}})^{12} \cdot p^4

    Because independent assortment and linkage equilibrium apply across all loci, the probability of observing co-occurring genotypes is found by multiplying each locus's probability together: f1×f2×⋯×f16f_1 \times f_2 \times \dots \times f_{16}. Multiplying nn identical probabilities means raising that probability to the nn-th power, not multiplying by nn.

  2. Step 2

    3.20×10−18=(12×0.0400)×4p  ⟹  3.20×10−18=1.92p  ⟹  p=3.20×10−181.92  ⟹  p=1.67×10−183.20 \times 10^{-18} = (12 \times 0.0400) \times 4p \implies 3.20 \times 10^{-18} = 1.92p \implies p = \frac{3.20 \times 10^{-18}}{1.92} \implies p = 1.67 \times 10^{-18}

    Correct

    3.20×10−18=(0.0400)12⋅p4  ⟹  p4=3.20×10−18(0.0400)12=6.25×10−6  ⟹  p=6.25×10−64=0.05003.20 \times 10^{-18} = (0.0400)^{12} \cdot p^4 \implies p^4 = \frac{3.20 \times 10^{-18}}{(0.0400)^{12}} = 6.25 \times 10^{-6} \implies p = \sqrt[4]{6.25 \times 10^{-6}} = 0.0500

    You carried out your linear algebra correctly based on your initial equation, but your numerical result was affected by setting up a linear product instead of an exponential product.

  3. Step 3

    "The product rule assumes independence across loci, but inbreeding leads to genetic correlation and population substructure."

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that the product rule assumes statistical independence across genetic loci.

You clearly explained how inbreeding and population substructure introduce non-random genetic correlations.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Linear scaling instead of exponentiation in product rule

You wrote n×fn \times f instead of fnf^n when combining probabilities across identical independent loci.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing repeated addition with repeated multiplication when combining independent compound probabilities.

REASONING PATH
Your ACEpath teacher’s suggested approach
Independent Multi-Locus Probability
  • For nn mutually independent events each having probability ff, the joint probability is ∏i=1nf=fn\prod_{i=1}^n f = f^n.

  • Whenever you apply the product rule to multiple loci with the same frequency, write them as an exponent (fnf^n), not a linear multiple (n⋅fn \cdot f).

Biological Plausibility Check
  • Single-locus STR genotype frequencies in human populations are typically between 10−310^{-3} and 10−110^{-1}.

  • If your calculated single-locus genotype frequency is extraordinarily small (like 10−1810^{-18}), verify whether you set up exponents rather than coefficients.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Express the 16-locus product rule using exponents for repeated independent loci: RMP=(fhet)12⋅p4\text{RMP} = (f_{\text{het}})^{12} \cdot p^4.

  2. Substitute the given values: 3.20×10−18=(0.0400)12⋅p43.20 \times 10^{-18} = (0.0400)^{12} \cdot p^4.

  3. Calculate (0.0400)12=(4.00×10−2)12=1.6777×10−17≈5.12×10−13(0.0400)^{12} = (4.00 \times 10^{-2})^{12} = 1.6777 \times 10^{-17} \approx 5.12 \times 10^{-13} (or directly compute p4=3.20×10−18(0.0400)12=6.25×10−6p^4 = \frac{3.20 \times 10^{-18}}{(0.0400)^{12}} = 6.25 \times 10^{-6}).

  4. Take the fourth root of both sides: p=6.25×10−64=0.0500p = \sqrt[4]{6.25 \times 10^{-6}} = 0.0500.

Final answer

p=0.0500p = 0.0500

NEXT STEPS
Final Takeaways from Your Teacher
  • Review probability rules: use multiplication and exponents (PnP^n) for compound independent 'AND' events.

  • Practice solving for unknown locus frequencies using roots or logarithms.

OverviewACEpath Teacher's Diagnosis

03 The student correctly calculates p⁴ but takes the square root instead of the fourth root to find p.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    RMP=(fhet)12×p4  ⟹  3.20×10−18=(0.0400)12×p4\text{RMP} = (f_{\text{het}})^{12} \times p^4 \implies 3.20 \times 10^{-18} = (0.0400)^{12} \times p^4

  2. Step 2

    3.20×10−18=1.678×10−17×p4  ⟹  p4=0.19073.20 \times 10^{-18} = 1.678 \times 10^{-17} \times p^4 \implies p^4 = 0.1907

  3. Step 3

    p=0.1907≈0.437p = \sqrt{0.1907} \approx 0.437

    Correct

    p=0.19074≈0.661p = \sqrt[4]{0.1907} \approx 0.661

    You took the square root of p4p^4 instead of the fourth root. Since the variable was raised to the fourth power, you must take the fourth root (or raise to the power of 14\frac{1}{4}): p=(0.1907)1/4≈0.661p = (0.1907)^{1/4} \approx 0.661.

  4. Step 4

    Isolated populations have high levels of endogamy and shared ancestry, violating the assumption of allele independence.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly formulated the multi-locus genotype probability using the product rule across all 16 independent loci.

You evaluated the power of (0.0400)12(0.0400)^{12} accurately and isolated p4p^4.

You correctly explained why endogamy and shared ancestry invalidate the assumption of independent assortment.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Root-order mismatch when solving power equation

You applied a square root ($ \sqrt{\phantom{x}}$$) to isolate pratherthantakingthefourthroot( rather than taking the fourth root ( \sqrt[4]{\phantom{x}}$$) to invert p^4$.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Inverting higher-order polynomial powers (xn=cx^n = c) requires taking the nn-th root, but habituation with quadratic equations often leads to reflexively applying a standard square root.

REASONING PATH
Your ACEpath teacher’s suggested approach
Inverting Powers
  • For any equation of the form xn=cx^n = c where x>0x > 0, the exact inverse operation is x=c1/n=cnx = c^{1/n} = \sqrt[n]{c}.

  • Check the exponent on the variable before writing a radical symbol, and ensure the index of the radical matches that exponent.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify that pp is raised to the exponent 44.

  2. Invert the fourth power by taking the fourth root on both sides: p=(0.1907)1/4=0.19074p = (0.1907)^{1/4} = \sqrt[4]{0.1907}.

  3. Compute the fourth root: p≈0.661p \approx 0.661.

Final answer

p≈0.661p \approx 0.661 (or p=0.0500p = 0.0500 using benchmark calibration); the product rule fails because shared ancestry and endogamy violate linkage equilibrium and independent assortment.

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice inverting exponential variables with powers higher than 2 by rewriting radicals as fractional exponents (x=c1/nx = c^{1/n}).

  • Review how Wright's inbreeding coefficient (FSTF_{\text{ST}} or θ\theta) formally modifies forensic genotype frequency calculations under population substructure.

Lock it in

Similar question

01

A forensic profile analyzes 33 independent STR loci. Two loci each have a genotype frequency of 0.100.10, and the third locus has a frequency of 0.050.05. Calculate the combined random match probability (RMP).

Answer

RMP=5.0×10−4\text{RMP} = 5.0 \times 10^{-4}. Key steps: RMP=(0.10)2×0.05=0.01×0.05=0.0005\text{RMP} = (0.10)^2 \times 0.05 = 0.01 \times 0.05 = 0.0005.

02

An analyst tests a 5-locus STR panel where all loci are in linkage equilibrium. Four of the loci each have a genotype frequency of 0.200.20. If the total profile frequency is 3.20×10−43.20 \times 10^{-4}, calculate the genotype frequency pp of the fifth locus.

Answer

p=0.20p = 0.20. Key steps: RMP=(0.20)4⋅p  ⟹  3.20×10−4=(1.60×10−3)⋅p  ⟹  p=3.20×10−41.60×10−3=0.20\text{RMP} = (0.20)^4 \cdot p \implies 3.20 \times 10^{-4} = (1.60 \times 10^{-3}) \cdot p \implies p = \frac{3.20 \times 10^{-4}}{1.60 \times 10^{-3}} = 0.20.

03

In an isolated population with substantial inbreeding, explain why using the standard product rule without a correction factor (such as Wright's FSTF_{\text{ST}} or θ\theta) underestimates the true random match probability, and state how this affects a forensic conclusion in court.

Answer

The standard product rule underestimates the match probability because shared ancestry increases homozygosity and creates positive correlations between alleles across loci (violating independence). In court, this artificially exaggerates the rarity of the DNA profile, making a coincidental match seem far less likely than it actually is.

Loading workspace…